No operating system in my phone - Sprint Samsung Galaxy Note5

Hello
I rooter and install TWRP on my galaxy note 5 (SM-920P) with success.
after I started my phone on recovery mode to install a custom rom
in the wipe menu I mistakenly checked the internal storage space.
after I found that my phone does not contain an operating systhem it contains TWRP
I tried with oden to install official firmware but its not working
please please what is the solution?
thank you

What error did u get on ODIN. It should work. Choose to reboot to download mode from TWRP and flash via ODIN.
If not, Find an OTG cable, put a Custom rom ZIP in a USB drive and install via twrp from OTG SUB drive.

Thank you

Related

[Q]Tab7.7 CM12 installed, Gapps failed, status 7 and no sdcard access

i tried to flash CM12 and Gapps 5.1.1 on the tablet. CM12 installed but not Gapps for some reason . The device rebooted into CM12 but without google apps. I might add that i cant type anything on the device without gapps as no keyboard.
i also cannot reload fresh rom and gappps into SDCARD to reflash as I cant see the SDcard from the file manager nor can I flash from ODIN any other working or stock roms (ODIN and my PC no longer see my phone SDCARD).
I can still see the SDCARD in recovery mode but since i cant find it in file manager or connect from my PC. I cant load any new roms and gapps to correct the installation. i can only install stuff via recovery mode if put in external sdcard.
i have supersu on the device...i guess that means its rooted.
it seems that i have two problems
1 ) without gapps , of course the device wont work properly. i have cm-12-20141128-UNOFFICIAL-p6800. Tried to install gapps 502 base from external sdcard. i get a status 7 installation abort error.
2) CM12 has rendered my sdcard not accessible via pc or file manager. so i cant put in files via external sdcard and move them to /sdcard in order for a reflash of rom from recovery mode.
Is my tablet now bricked?
Which Recovery Do you use? Try to Flash the latest from CM 12. It's from May 2015.
CM11 CM12 installation on Tab 7.7 P6800
THanks. I managed to flash official stock CSC rom from Odin and tab updated software ota and is now running on 4.1.2.
I have installed cwm 6.0.3.0-p6800.tar on the table and rooted with supersu v1.25+
Tried to install kitkat
cm-11-20141110-UNOFFICIAL-p6800
but when i got to gapss, i got a status 7 error using
gapps-444-base-20150515-1-signed
I also tried to install lollipop version but didnt get pass the custom rom installation..it didnt even start...at ......... FSfactory....... for at really long time so i aborted..
cm-12.1-20150502-UNOFFICIAL-p6800
gapps-511-base-20150515-1-signed
any advise?
Not sure about CWM recovery, but at last on TWRP, my laptop can see the SD card while in recovery mode. Did you try the 5.1.1 lollipop ROM from danielhk?

[Completed] gt s7392 unable to mount/wipe data

Hey guys i need help. I recently rooted my samsung galaxy trend gt-s7392, so that i can install a custom rom. I have used odin and installed cwm and then installed twrp mod for my device. I still havent wiped my system rom but inorder to install the custom rom i was trying to format the /data partition but for some reason it was stuck in cwm. So i switched to twrp to tackle the problem. But according to logcat , twrp is unable to mount the /data partition and the /data partition shows 0mb in total size and in free space. I cannot mount or format the /data partition but all other partitions are working well and can be mounted and formatted. And if i try to reboot my system in its current state then it just gets stuck in a bootloop. Please tell me what to do so that i can mount and format the /data partition to install the stock or any custom rom. Any help is appreciated. Please help!
Hi, thank you for using XDA Assist. You shouldn't have both CWM and TWRP on your phone at the same time. Something didn't work right right when you tried to replace cwm with twrp. You might have to return your device to stock and start over.
jd1639 said:
Hi, thank you for using XDA Assist. You shouldn't have both CWM and TWRP on your phone at the same time. Something didn't work right right when you tried to replace cwm with twrp. You might have to return your device to stock and start over.
Click to expand...
Click to collapse
Please help i think i have messed it up pretty bad. My phone boots into recovery but it only shows loading bar in cwm and the picture of an android. I can still boot into download/odin mode but my phone can neither boot into system nor can i use adb shell commands. I cannot even use cwm recovery sice it only shows loading. Please Please Please Help!!!!
Don't panic. Unfortunately there is not a specific forum for your device on XDA. But what you'll want to do is flash the stock firmware in odin.
- Goggle odin 3.07 xda. Extract that and install it on your pc.
- Download the stock firmware from sammobile.com You have to register but it's free. You'll download a zip file. Use 7-zip or winrar to extract it. You'll end up with a .tar.md5 file. That's what you'll use in odin.
- Star odin on your pc
- Put your device in download mode and connect it to your pc with the usb cable
- Using the PDA slot in odin find the .tar.md5 file
- Only have f. reset and auto-reboot checked in odin. DO NOT have re-partition checked.
- run odin
Note: odin can be finicky. Use the usb ports in the back of the PC. You might have to try different usb ports and cables

[HELP] Soft-bricked Galaxy S6 G920F [Solved]

Hello everyone. So, let's start by explaining what I have did.
For a while I had the XtreStolite Odex 2.0 edition and I wanted to try out other ROM. I have factory reset-ed when I was installing the ROM using TWRP and I somehow managed to delete all the phone's internal stuff, but I can still boot to TWRP or download mode.
I have tried to flash stock firmware using Odin 3.10.6 ( running as administrator too ) and when it gets to sboot.bin it fails right away. I have tried using Samsung Smart Switch PC Software, tells me my device is unsupported. If I try to manually find my model using the S/N, the software fully downloads then gives me an error.
I have tried to ADB sideload from TWRP Advanced menu, whenever I want to flash for example xtrestolite odex zip ( named rom.zip for short ) it goes "serving:... 21%" and gets stuck. If I try to push a zip it says "error:closed". I am no big expert in ADB, I don't know how to install the latest version, and I can't download the full Android SDK because my internet is very slow. I had Bootloader and Modem 5.1.1
I am looking for a way to move the XtreStolite ROM zip into the phone's memory so I can boot to TWRP and install the ROM. I've seen something with OTG Cable and USB but I have no real knowledge of these. If it comes as a last resort, if someone could briefly explain me how would I manage to repair the phone using the OTG Cable and USB stick.
I also have a Nandroid Backup on my PC but I don't know how to move it to the phone's storage, because it's well, bricked. When I'm trying to copy files over Mount option in TWRP, it says that it cannot copy the file, the device may be disconnected.
I had Bootloader and Modem 5.1.1, also Windows 10. I can go back to 7 or 8.1 anytime it's needed.
Much appreciations.
EDIT: I actually repaired it by flashing a stock firmware downloaded from xda ( God bless you whoever linked the mega.co.nz stock fw link ) . Thread can be deleted.
You can also flash these via odin.
http://www.sammobile.com/firmwares/database/SM-G920F/

[Completed] CM13 + CWM + Gapps = Brick

Ok. I have a Samsung S4 mini. Yesterday I installed CM13. Dumb thing to do.
It was an automatic update from CMUpdater, so not through the Recovery menu.
For my surprise, I noticed that this update also updated the ClockWorkMod Recovery to the latest version available.
The CM13 installation went well actually .The phone booted fine. Then of course I needed the new Gapps installed. I downloaded the correct Gapps. Boot into CWM recovery. Choose the Gapps ZIP file. And... Error! I went back to phone to enable root acess (ADB & Apps), and enabled USB debugging also. And...Error! No way to install Gapps with CWM recovery.
After some search I realize that the new Gapps for CM13 is somehow not compatible with the CWM recovery that was instaled. So I downloaded ROM MANAGER to change the recovery to TWRP, which everybody said would perfectly flash the Gapps smoothly. Nothing happened. No TWPR. Only CWM still on. Then I downloaded Flashify and went back and forth on installing and unistalling TWPR and CWM. On and On.
Conclusion: somewhere along the process not only I couldnĀ“t install TWRP recovery, but also have wrecked the CWM recovery. Now, no matter what I do, I cannot enter recovery mode at all, hence i cannot neither install Gapps or Reinstall another ROM to "start from scratch"....
I can boot the phone normally.
I can boot into donwload mode normally.
I tried installing TWRP .tar with ODIN3 but it keeps saying "cant open USB port", so it fails.
I have also installed KIES. It sucessfully install drivers, but fails to connect with my device.
Is there anyway to install a Recovery or a fresh new ROM without having to boot recovery?!
Some help? Please.
Hello,
Welcome to XDA.
Do you have USB debugging enabled in system settings to allow flashing via Odin? You may not even need to use Odin.
Try posting your question in the forum linked below.
http://forum.xda-developers.com/galaxy-s4-mini/help
The experts there may be able to help.
Register an XDA account to post and reply in the forums. Good luck.

Not able to reboot into system after installing twrp

I just wanted to try a rom except miui.......unlocked the bootloader and installed the twrp using platform tools........I watched a tutorial on yt to do it.....but the maker of the video didnt told me that i need to have the files for the custom os installed on my phone......I had no files related to custom rom intalled on my phone.....Now i am not able to reboot into system.....I bi mistakely wiped the internal storage and data,....now when i try to do anything it shows no partition found(while restoring etc).....Pls help me!
Rayirth said:
I just wanted to try a rom except miui.......unlocked the bootloader and installed the twrp using platform tools........I watched a tutorial on yt to do it.....but the maker of the video didnt told me that i need to have the files for the custom os installed on my phone......I had no files related to custom rom intalled on my phone.....Now i am not able to reboot into system.....I bi mistakely wiped the internal storage and data,....now when i try to do anything it shows no partition found(while restoring etc).....Pls help me!
Click to expand...
Click to collapse
Download a ROM, put it on a USB drive, use an adapter to convert USB to microUSB or USBC(whichever your device uses), connect the USB to your device, boot into TWRP, choose the Install option, when you get to where you choose your files, find the USB drive and flash your ROM.
Droidriven said:
Download a ROM, put it on a USB drive, use an adapter to convert USB to microUSB or USBC(whichever your device uses), connect the USB to your device, boot into TWRP, choose the Install option, when you get to where you choose your files, find the USB drive and flash your ROM.
Click to expand...
Click to collapse
Hi
Thanks for the suggestion.
I just want to know something.
I transferred the rom zip file to my phone as u said and i can also see it in internal storage.Am also able to flash it
The whole story is like i first unlocked my bootloader and then installed the custom recovery...I have heard thatto install a custom rom, u require root
But in the case i did not perform any root.So is it ok to flash the rom+it shows failed to clear cache and failed to mount /product errors highlighted in red colour.
Pls advice <3
Rayirth said:
Hi
Thanks for the suggestion.
I just want to know something.
I transferred the rom zip file to my phone as u said and i can also see it in internal storage.Am also able to flash it
The whole story is like i first unlocked my bootloader and then installed the custom recovery...I have heard thatto install a custom rom, u require root
But in the case i did not perform any root.So is it ok to flash the rom+it shows failed to clear cache and failed to mount /product errors highlighted in red colour.
Pls advice <3
Click to expand...
Click to collapse
No, root is not required to flash a ROM, all that is required is an unlocked bootloader and a custom recovery.
I suggest you start over by flashing the exact same stock firmware version that you had before modified the device to fix the errors, then unlock the bootloader again(if flashing the firmware locks the bootloader again), then flash TWRP again, download your ROM and place it in your internal storage, flash the ROM but do not wipe anything until after you have flashed the ROM, after flashing the ROM, factory reset the device and wipe cache and dalvik cache(but not system and not internal storage) then reboot the device.

Categories

Resources