Samsung galaxy i9195 and Pokémon go help please - General Questions and Answers

Hi everybody I don't usually post and ask for help but this has got me stumped I have been trying for so long now to get root and Pokémon go to work side by side
This is what I can and have tried so far .
I install fresh cm13 if I delete the su files in xbin and bin then Pokemon works OK but I have lost my root . this is the only way I can get it too work at all
I have read posts on installing superSU and Hidesu with systemless xposed. After many days of trying I manages to get both installed and thought it would work but I still get the "this device is not compatible "
The steps I took were to do a full clean install of cm13 remove the su files reboot into recovery install xposed systemless 82 followed by SuperSU zip file and then hidesu all installed fine rebooted and got the incompatible message on pokemon I then uninstalled the systemless which also didn't work I tried the suhide GUI and I also tried the latest root switch .
I am sure there are many questions on this I have read so many posts on how to do this but for some reason it's not working for me .
If anybody could help me or maybe tell me where I am going wrong ? As I just don't want to lose root for Pokémon go
Many thanks in advance

Related

replace kinguser with supersu

somebody could teach me the easiest way to replace kinguser with supersu please?
dewagame said:
somebody could teach me the easiest way to replace kinguser with supersu please?
Click to expand...
Click to collapse
Follow these simple steps:
1. Go to the Play Store and install SuperSU.
2. When SuperSU is installed, give it permission as Super User.
3. Uninstall KingUser.
4. Done.
ИΘΘK¡€ said:
Follow these simple steps:
1. Go to the Play Store and install SuperSU.
2. When SuperSU is installed, give it permission as Super User.
3. Uninstall KingUser.
4. Done.
Click to expand...
Click to collapse
hI! I try on my HUAWEI ASCEND G6 and... dont work ... is possibel that an update that Kinguser had done make it impossibel?????
I root with RootGenius_en, was ok, kinguser ask for a update, done. But Now i whant to change do SuperSu and dont work. I had permissions and every thing...
Help! :crying:
Me too
I'm trying to do this too, but I aint sure how to do it. I mean I guess if its not super necessary I can leave it the way it is. Tried this method and its a no go. I don't think the KingUser SU is letting superSU update its binaries. I already have twrp, but not sure what next. If its not necessary I'll leave it alone, but I was just wondering if theres any reason to change over or if it could even be done.
P.S This way never worked for me as superSU can't get past trying to install the binaries. I got twrp so I'm wondering if I'd have to flash it. Nothings wrong on my end are anything, but I just assumed having superSU would be better then kinguser but not really sure.
many people have this problem.
first of all, kinguser is great to root the G6, and in most cases the only working method without custom recovery,
but because it flashes kinguser.apk as system app you can't uninstall it the normal way.
the solution is to flash supersu.zip and then uninstall kinguser. this way supersu will be your systemapp.
find the files and tutorials you need on our facebook group,
we have 1500+ members, CWM + TWRP, android 4.3 + 4.4, we can root your g6 and unlock your bootloader.
but we still don't have a subforum on XDA....
https://www.facebook.com/groups/328261053999820
Must vary from device to device cause I've did all that, and it gives the message "Installing Please wait..." and then after it fails it says " Installation Failed! Please reboot and try again" and if kinguser is removed in superSU when trying to update/install the binaries it says "There is no SU binary installed, and SuperSU cannot install it. This is a problem! If just upgraded to Android 4.3 you need to manually re-root- consult the relevant forums for your device."
This aint the g6 though but this thread is the kinguser replace with superSU thread. So I thought I'd post in it.
washichi said:
many people have this problem.
first of all, kinguser is great to root the G6, and in most cases the only working method without custom recovery,
but because it flashes kinguser.apk as system app you can't uninstall it the normal way.
the solution is to flash supersu.zip and then uninstall kinguser. this way supersu will be your systemapp.
find the files and tutorials you need on our facebook group,
we have 1500+ members, CWM + TWRP, android 4.3 + 4.4, we can root your g6 and unlock your bootloader.
but we still don't have a subforum on XDA....
https://www.facebook.com/groups/328261053999820
Click to expand...
Click to collapse
Install SuperSu rom magazin play.
Then instal rom lite box.
Open the app, and uninstall kinguser
easy, and it`s working.I just deleted kinguser 2 mins ago
Hum
@andruala Never worked for me that way, anytime I remove king user root gets removed. Never was able to flash superSU rom correctly because binaries couldn't get updated from superSU because root was removed once king user was uninstalled. I've heard people mention it working the way you suggested, but I've also read posts where people have a hard time getting it replaced with superSU because root gets removed when king user is replaced, which doesn't allow superSU to install the binaries correctly. Most people probably can't get the binaries installed correctly from superSU which is the same problem I had so they end up just leaving it king user. I could try whats suggested here but I very much doubt its going to work as explained from my conflict that when king user is removed, root is removed and whether you flash a SU zip or not root still aint enabled because SU binaries are nt installed correctly. So until I actually can confirm this works myself I'm gonna prob say its a no-go for me. Could be device specific but I did all this to a tee and still had problems. There was a post on freak tab where someone had the same problem. I might still try this, I just dont see it working like as said.
freestilesteve said:
@andruala Never worked for me that way, anytime I remove king user root gets removed. Never was able to flash superSU rom correctly because binaries couldn't get updated from superSU because root was removed once king user was uninstalled. I've heard people mention it working the way you suggested, but I've also read posts where people have a hard time getting it replaced with superSU because root gets removed when king user is replaced, which doesn't allow superSU to install the binaries correctly. Most people probably can't get the binaries installed correctly from superSU which is the same problem I had so they end up just leaving it king user. I could try whats suggested here but I very much doubt its going to work as explained from my conflict that when king user is removed, root is removed and whether you flash a SU zip or not root still aint enabled because SU binaries are nt installed correctly. So until I actually can confirm this works myself I'm gonna prob say its a no-go for me. Could be device specific but I did all this to a tee and still had problems. There was a post on freak tab where someone had the same problem. I might still try this, I just dont see it working like as said.
Click to expand...
Click to collapse
Yes...i`m really sorry.For me wit worked before i restarted the phone...
After de restart i`ve seen that the root is not working anymore...
Sorry for my bad.
No worries bro. Probably varies depending on how you root from device to device.
Its not your fault. No worries. I'm just thinking it varies from device to device and how you actually go about rooting . I'm also thinking that maybe if I rooted with another app/prog that it would have been easier to switch from king user to superSU. I use lookout premium security on my phone and kingroot and king user have never been flagged with any viruses so I've just left it on and running the way it is and so far so good. Other then the two errors I mentioned in the previous post king user/kingroot has been working good. I'm sure if I did a whole restore/wipe/clean and root with another program there might be a possibility to remove king user and replace with superSU but in the end I just decided to roll with king user/kingroot as I didn't feel like doing al that and its been doing its job fine.
QUOTE=andruala;58880236]Yes...i`m really sorry.For me wit worked before i restarted the phone...
After de restart i`ve seen that the root is not working anymore...
Sorry for my bad.[/QUOTE]
Well I thought about leaving kinguser sitting there on my system too until one day I installed network monitor stuff and noticed kinguser sure likes to make HTTP connections every time the Internet is available. Imagine that. Also have a look, there are /system/bin/.usr/.ku etc. hiding all over your system.
The earlier versions of Kingo Root were much better
jidanni said:
Well I thought about leaving kinguser sitting there on my system too until one day I installed network monitor stuff and noticed kinguser sure likes to make HTTP connections every time the Internet is available. Imagine that. Also have a look, there are /system/bin/.usr/.ku etc. hiding all over your system.
Click to expand...
Click to collapse
Those earlier versions were putting SuperSU binaries into the root. But now they are putting on this King User crap. Reason I say it's crap is exactly what you mentioned. As soon as I root a phone with Kingo Root, Google Search immediately tells me that it will not allow me to search for anything because "your computer or network may be sending automated queries. To protect our users, we can't process your request right now"
Good God! What the heck is Kingo Root putting onto these phones now? It sure isn't putting just su binaries in there.
Indeed. What is needed is for someone to take a vanilla phone into a cleanroom, install the mess, and report back on exactly what ended up getting put where, in order for somebody to make a "kinguser detox/.antidote" APP and/or shell scripts that would clean the mess totally back off.
don't know if it's gonna help you ( have alcatel onetouch idol 2 mini s):
i also couldn't update binaries su and had kinguser.
then i downloaded the beta version of supersu (on xda) and flashed it with my cwm. after that when supersu asked if i wanted to update, i said yes and choose normal update (not the cwm/t... one) it than updates and asked if i wanted to remove the external root apps (ie: kinguser) and voila!
(sorry English isn't my language, so don't know if i explained myself well^^)
satine01black said:
don't know if it's gonna help you ( have alcatel onetouch idol 2 mini s):
i also couldn't update binaries su and had kinguser.
then i downloaded the beta version of supersu (on xda) and flashed it with my cwm. after that when supersu asked if i wanted to update, i said yes and choose normal update (not the cwm/t... one) it than updates and asked if i wanted to remove the external root apps (ie: kinguser) and voila!
(sorry English isn't my language, so don't know if i explained myself well^^)
Click to expand...
Click to collapse
Why did you need to root with kingo if you have custom recovery?!
I rooted first then found the cwm for my phone?
satine01black said:
I rooted first then found the cwm for my phone?
Click to expand...
Click to collapse
Oh. I wasn't angry at you Was just asking.
it took me like a year to root my phone then i couldn't make it work well with kinguser, and i wanted supersu anyway, so i found that i could install manually the app with cwm .
anyway, i don't now if you can use cwm without a root?
satine01black said:
it took me like a year to root my phone then i couldn't make it work well with kinguser, and i wanted supersu anyway, so i found that i could install manually the app with cwm .
anyway, i don't now if you can use cwm without a root?
Click to expand...
Click to collapse
You can, but it doesn't really make much sense to.
Use Eroot, then try superSU installation
CVAngelo said:
Those earlier versions were putting SuperSU binaries into the root. But now they are putting on this King User crap. Reason I say it's crap is exactly what you mentioned. As soon as I root a phone with Kingo Root, Google Search immediately tells me that it will not allow me to search for anything because "your computer or network may be sending automated queries. To protect our users, we can't process your request right now"
Good God! What the heck is Kingo Root putting onto these phones now? It sure isn't putting just su binaries in there.
Click to expand...
Click to collapse
I had the same issue with my mobile, (Sony Ericsson Xperia Ray (ST18i)), I then rooted my phone with EROOT Software which installed a superuser app, then i got the .apk file of SuperSU via Bluetooth from a friend and installed it. one has to grant permission when it asks for superuser rights, then updating binary files is no longer a problem. It also asks for removal of the Superuser-app that was pushed through the EROOT software, you do that. Then I installed link2SD and link2sd pro key from google play store and converted the SuperSU app into a system-app. Now SuperSU is working perfectly again.
You both should try it!!

About Nightowl rom on galaxy note n7000 (root related)

hello xda
this is my first post so if it's wrong to post here please warn me.
So here is my problem
my phone is galaxy note n7000 build number lsz
1. installed partiton via odin to increase my internal application setup folder to 6 gb
that worked great
2.installed philz touch 5.06
that worked too
3. installed kernel from http://forum.xda-developers.com/galaxy-note/development/rom-t2938649
3.installed nightowl rom and gapps from above
that worked too
i opened developers options and arrange root access to apps and adb
i can use phone with no problem but when i try supersu or superuser or busybox or titanium backups my phone says u need to have root access
then i tried xxx.signed.zip folders to root again and again, no good so far
i installed a root checker from googleplay it says rooted check but i cant use anything root related
and when i try folder manager it says open root access so i say yes and it freezes there
i know its a little complicated (at least for me because its for my first attempt i was using 4.1.4 stock rom) but if u read and help me i' appreciate
sorry for my english
Vanwilder85 said:
hello xda
this is my first post so if it's wrong to post here please warn me.
So here is my problem
my phone is galaxy note n7000 build number lsz
1. installed partiton via odin to increase my internal application setup folder to 6 gb
that worked great
2.installed philz touch 5.06
that worked too
3. installed kernel from http://forum.xda-developers.com/galaxy-note/development/rom-t2938649
3.installed nightowl rom and gapps from above
that worked too
i opened developers options and arrange root access to apps and adb
i can use phone with no problem but when i try supersu or superuser or busybox or titanium backups my phone says u need to have root access
then i tried xxx.signed.zip folders to root again and again, no good so far
i installed a root checker from googleplay it says rooted check but i cant use anything root related
and when i try folder manager it says open root access so i say yes and it freezes there
i know its a little complicated (at least for me because its for my first attempt i was using 4.1.4 stock rom) but if u read and help me i' appreciate
sorry for my english
Click to expand...
Click to collapse
i always flash the latest su zip from recovery when flashing every rom. other than trying that, i dont have any other suggestions.
http://forum.xda-developers.com/showthread.php?t=1538053
bweN diorD said:
i always flash the latest su zip from recovery when flashing every rom. other than trying that, i dont have any other suggestions.
http://forum.xda-developers.com/showthread.php?t=1538053
Click to expand...
Click to collapse
thank you my friend you're a lifesaver :good::good::good:

[Completed] Cant install v4a, possibly due to partial/incomplete root on vf685 smart kicka

Hi guys. I have a weird problem... I have a vf685 with android 4.4.2
Im trying to install viper audio(v4a) from this site but it fails and says its due to a problem with busy box or my device is not "completely rooted". I am rooted and used several root checker apps to confirm. I have twrp installed as well, xposed modules, root explorers, etc. Everything works fine... Except v4a and also when I open mtk droid tools the square is orange/yellow and it should be green, i have to first click to get root permission. I used king root(not kingo root) to root it, its the only one that seems to work on this phone, I didn't like the superuser app from kingroot so I searched google and found a zip file to replace kinguser with SuperSU and installed with terminal emulator. Is my device only partially rooted (if that's possible) or if not what else could it be?
P.S. its not a problem with busybox, although busybox is installed to /system/bin. Not to /system/xbin
Please help!
Timothy Behrmann
Hi,
Try asking in the official XDA thread: http://forum.xda-developers.com/showthread.php?t=2191223
Good luck

Help with Samsung s5 root!

Hello everyone!
I would like to ask you something and i REALLY HOPE someone will be able to help me out.
I have a samsung s5 sm-g900f with Android 6.0.1 and i'm trying to root it.
Actually it was supposed to be rooted when i got it -it's my bf's phone. And...aaam i don't know if it's called "rooted" when it just have custom recovery and rom? I just call it that way-. Yesterday i installed root checker and Super SU and the Super SU keeps saying that "There is no SU binary installed and SuperSU cannot install it" and that if i have Android 5 i should re root manually and stuff.
I have tried like everything i have found on the net since yesterday, flashing with Odin, changing recovery from twrp to cwm, and all the time the steps are made by letter, all seems fine, i see the red pirate android after the recovery reboot and all that, have tried to install the UPDATE-zip and the BETA-zip and all i could find. I tried to install Kingroot but i couldn't figure out how. My recovery nor Odin can see the file to install it and then i try to do it manually, like all apps, it says could not be installed. :crying:
I got really tired and i cave in to ask for help here. I hope the post is in the right place and if it's not please move it where it should be!
Thank you in advance!
CloeNi said:
Hello everyone!
I would like to ask you something and i REALLY HOPE someone will be able to help me out.
I have a samsung s5 sm-g900f with Android 6.0.1 and i'm trying to root it.
Actually it was supposed to be rooted when i got it -it's my bf's phone. And...aaam i don't know if it's called "rooted" when it just have custom recovery and rom? I just call it that way-. Yesterday i installed root checker and Super SU and the Super SU keeps saying that "There is no SU binary installed and SuperSU cannot install it" and that if i have Android 5 i should re root manually and stuff.
I have tried like everything i have found on the net since yesterday, flashing with Odin, changing recovery from twrp to cwm, and all the time the steps are made by letter, all seems fine, i see the red pirate android after the recovery reboot and all that, have tried to install the UPDATE-zip and the BETA-zip and all i could find. I tried to install Kingroot but i couldn't figure out how. My recovery nor Odin can see the file to install it and then i try to do it manually, like all apps, it says could not be installed. :crying:
I got really tired and i cave in to ask for help here. I hope the post is in the right place and if it's not please move it where it should be! Thank you in advance!
Click to expand...
Click to collapse
Since you can flash custom recovery then your bootloader is already unlocked so....
Do a search for "flashing SuperSU.zip Galaxy S5" or you might need to search for "flashing SuperSU.zip in systemless mode galaxy s5". Flashing one of those should give you root and su binaries, after flashing, boot the device and open the SuperSU app and update the su binaries then reboot the device. Then after rebooting, you need to go to system settings>developer options>root access and set it to "apps and adb", then install a file manager that has a root explorer such as ES File Explorer, then open it, tap the menu button, go to the "TOOLS" tab, find "Root Explorer" and turn it on, then when you see the next menu, tap "Mount R/W", then set all listed partitions to "rw".
If you can access your SELinux profile, make sure it's set to "permissive" mode.
If you can get all of that set then you'll have access to modify and control pretty much anything you want about the device.
I DO NOT PROVIDE HELP IN PERSONAL MESSAGE, I DO NOT TAKE REQUESTS IN PERSONAL MESSAGE, YOU WILL BE IGNORED. KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
thank you!!!
i wont be able to try it for a few days but i'll try it as soon as i can and give you feedback on this!
So i'm trying to follow your instructions right now. I guess it's ok if i install recovery upon recovery and SU upon SU without first removing the "faulty" one?
Cause i have done the first steps a lot these days
edit: i flashed again aaaaaand nothing new happened. The SU binary is nowhere to be found :/
some say it could be a problem of the cable or the computer?
Should i try from a different pc and cable? I do not really understand it but i'll give it a try later
edit 2: i retried from another pc and another usb cable, the same happens. Does not install the SU through the recovery
I installed the SuperSU (actually enebled it again and updated it) from playstore and opened it and it says the sme thing again. Can't find su binaries and stuff.
What should i do? Is format a solution or can avoid it?

need help with magisk root, twrp and xposed (update 2017)?

Hey all,
Just purchased a LG U2 and now trying to make it work in the way i want it.
All informations here seem very old, so I wanted to open an update thread, with all what is possible on th lgu2, while
I found only very outdated informations...:crying:
So far:
First I setup the watch with AW2.0, after that flashed twrp 3.1.1.0 and supersu wear 2.82
I managed to get busybox installed and wanted further add Xposed.
There my problem starts, flashing xposed didn't work out.
So right after that, I switchd to Magisk root, to try work with the modules supplied.
(Steps -> use script UnSU, after that flash boot.img again, than flash MAgisk through twrp)
But after that the same with the modules. I try to install busybox, magisk tell me its no magisk module (i've downloaded the module and pushed it on the sd through adb, while the download button isn't reachable in magisk dialogue menu)
in twrp the module tells me there is no magisk installed.
so how can we go on from here? is there a way to make it all work?
did somebody try to change dpi and download the module directly through magisk? does it work?
also if somebody could help with an updated list of sideload able full android apps?
would need an email that can handle at least two accounts directly on the watch (please not advice outlook, its working from the phone i know)
thanks to all in advance
sebj84 said:
Hey all,
Just purchased a LG U2 and now trying to make it work in the way i want it.
All informations here seem very old, so I wanted to open an update thread, with all what is possible on th lgu2, while
I found only very outdated informations...:crying:
So far:
First I setup the watch with AW2.0, after that flashed twrp 3.1.1.0 and supersu wear 2.82
I managed to get busybox installed and wanted further add Xposed.
There my problem starts, flashing xposed didn't work out.
So right after that, I switchd to Magisk root, to try work with the modules supplied.
(Steps -> use script UnSU, after that flash boot.img again, than flash MAgisk through twrp)
But after that the same with the modules. I try to install busybox, magisk tell me its no magisk module (i've downloaded the module and pushed it on the sd through adb, while the download button isn't reachable in magisk dialogue menu)
in twrp the module tells me there is no magisk installed.
so how can we go on from here? is there a way to make it all work?
did somebody try to change dpi and download the module directly through magisk? does it work?
also if somebody could help with an updated list of sideload able full android apps?
would need an email that can handle at least two accounts directly on the watch (please not advice outlook, its working from the phone i know)
thanks to all in advance
Click to expand...
Click to collapse
Ok i did a fresh flash.
i see my fault was to install busybox the first time after installing supersu.
did it this time without and mgisk works so far fine. granting access for total commander no problem.
but now another thing. i installed now busybox from the repos in magisk, he say installation successful, but the module isn't there after reboot?
anyone got the same?
sebj84 said:
Ok i did a fresh flash.
i see my fault was to install busybox the first time after installing supersu.
did it this time without and mgisk works so far fine. granting access for total commander no problem.
but now another thing. i installed now busybox from the repos in magisk, he say installation successful, but the module isn't there after reboot?
anyone got the same?
Click to expand...
Click to collapse
another try. i switched back to supersu wear 2.82, installed stericsons busybox. works.
installed xposed sdk25 via twrp, says success, but after reboot xposed installer says no active framework.
i used a systemless framework... will search for the link again.
anybody got it done this way?

Categories

Resources