Related
I obtained root via Odin as superoneclick didn't work. Then i flashed the latest version on MIUI and I lost root access. A couple of forums said superuser needs to be enabled in the settings. However when I opened superuser and looked under preferences there was no toggle to enable it.
Sent from my SGH-I997 using XDA App
Download rom manager. Go to download rom in rom mannager. Select superuser. Download superuser 2.3.6.3 efg. Install through cwm by reboot into recovery and select install zip from sd card. You dont need to wipe anything just install zip from sd card. To find it in cmw its under clockworkmod, then download, then downloads.androidsu.com, then superuser, then the zip. Reboot and you will have root. I had this problem also this worked for me.
Click thanks if this helped you.
Use GTGs ultimate unbricker and revert to stock with superuser rights and 3e recovery
Or...
Just try to use superoneclick
Sent from a CRABThinker running Infused GB
Sent from a CRABThinker running Infused GB
Same problem
Carlrobling said:
Download rom manager. Go to download rom in rom mannager. Select superuser. Download superuser 2.3.6.3 efg. Install through cwm by reboot into recovery and select install zip from sd card. You dont need to wipe anything just install zip from sd card. To find it in cmw its under clockworkmod, then download, then downloads.androidsu.com, then superuser, then the zip. Reboot and you will have root. I had this problem also this worked for me.
Click thanks if this helped you.
Click to expand...
Click to collapse
u mean 2.3.6.3 efgh?? miui is not listed as supported in the description and the one you say to DL doesn't exist in ROM manager.
invizo said:
Same problem
u mean 2.3.6.3 efgh?? miui is not listed as supported in the description and the one you say to DL doesn't exist in ROM manager.
Click to expand...
Click to collapse
Carlrobling said:
Download rom manager. Go to download rom in rom mannager. Select superuser. Download superuser 2.3.6.3 efg. Install through cwm by reboot into recovery and select install zip from sd card. You dont need to wipe anything just install zip from sd card. To find it in cmw its under clockworkmod, then download, then downloads.androidsu.com, then superuser, then the zip. Reboot and you will have root. I had this problem also this worked for me.
Click thanks if this helped you.
Click to expand...
Click to collapse
Yes that's what I was referring to. It supports the os not the rom. So its for the version of android not the rom you are using. I followed these steps and it worked flawlessly for me. I just checked in rom manager its in there. Make sure that you installed rom manager properly. I found these instructions in the miui thread in the android dev section.
I can confirm that this is working. There is no toggle though. Just open your programs that require root again and it will ask you whether to allow or deny root access.
Worked for me. FINALLY got Superuser access again. Thrilled
Thanks going to you!
I'll start out by saying I'm a total noob at this whole android rooting process, hence why I'm posting a thread here rather than posting a reply in the appropriate thread. I rooted and unlocked my phone using this guide: http://forum.xda-developers.com/showthread.php?t=1762709&nocache=1
I opted for the "flashing rooted stock ROM" option.
As the title of my post states, after installing CM10.1, I open superuser to update binary and everything appears to work fine until the very end, it reads "making sure new su works...fail!". Now when I restore back to rooted TW, I have no problem updating the su binary. I've tried Superuser update fixer, I've installed busybox; i cant find any other solution on Google. Any ideas?
The CM file I downloaded is: cm-10.1-20130714-NIGHTLY-d2vzw.zip
Gapps file is: gapps-jb-20130301-signed.zip
Liam1987 said:
I'll start out by saying I'm a total noob at this whole android rooting process, hence why I'm posting a thread here rather than posting a reply in the appropriate thread. I rooted and unlocked my phone using this guide: http://forum.xda-developers.com/showthread.php?t=1762709&nocache=1
I opted for the "flashing rooted stock ROM" option.
As the title of my post states, after installing CM10.1, I open superuser to update binary and everything appears to work fine until the very end, it reads "making sure new su works...fail!". Now when I restore back to rooted TW, I have no problem updating the su binary. I've tried Superuser update fixer, I've installed busybox; i cant find any other solution on Google. Any ideas?
The CM file I downloaded is: cm-10.1-20130714-NIGHTLY-d2vzw.zip
Gapps file is: gapps-jb-20130301-signed.zip
Click to expand...
Click to collapse
Make sure your using the latest version of the Superuser app, another option would be to try using SuperSU as an alternative to the Superuser app. Also is root access functioning normally for you?
Sent from my SCH-I535 using xda premium
Hi and thanks for the reply.
Yes superuser is up to date and I've tried supersu. Root seems to be functioning as I can open apps that require root access.
But when I try to restore missing apps via titanium backup, I get a msg saying "restore finished, 'x' elements failed". X being the number of apps I try to restore
Sent from my SCH-I535 using xda app-developers app
Check to see if the root apps are granted root access.
chevyowner said:
Check to see if the root apps are granted root access.
Click to expand...
Click to collapse
When I open SuperSU, it has a list of apps with superuser status. Is that what you mean? I can run root apps and as far as I can tell they're functioning, with the exception of when I try restoring apps with Titanium Backup
Also, right after I flashed CM10.1, I made a backup right away. Not sure if it means anything, but If I wipe/reset and restore the CM10.1 backup, and the first thing I do is try updating the binary in Superuser, it reads "checking installed version: 9 com.Android.Settings", until I open SuperSU and "update binary". Then if I go to Superuser, it'll say "checking installed version: 1.41:Superuser" as I imagine it should. But at this point I still run into "making sure new su works..fail!"
Superuser has no problem updating when I'm on my rooted stock. I'm sure I messed up somewhere along the way while flashing CM10.1, I just don't know where
Greetings.
Code:
[URL="http://forum.xda-developers.com/showthread.php?t=1998801"]Use this on your own risk [/URL]
[Q]; Is it safe ? Yes it is.
[Q]: Will it work for my device ? Try it and U will find out ...
[Q]:Unroot possible ? Sure use option in SuperSu apk or better backup recovery/whole stock rom.
Since many users proposed to me to create a new thread for fullroot of Galaxy Core 2 phones ( some models ), I decided to do so.
It's made for stock recovery for Galaxy Core 2 and for latest update of it.
Stock recovery for G355HN and any other custom recovery.
GC2 stock recovery phones have not fully working SELinux recovery support and the CF instalation of SuperSu won't work. Read : it also work in permissive mode.
Custom Recoveries :
TWRP :
Original developed by @Y300-0100 http://forum.xda-developers.com/gala...55h-m-t2998094
modded by @Dhruvit Pokharna http://forum.xda-developers.com/gala...-2-sm-t3013103
CWM :
Original developed by @cleverior.ipul http://forum.xda-developers.com/gala...alaxy-t2990852
If you have working CWM / TWRP/ Mobile odin ( recovery with full SELinux support) you could use update script from ChainFire to obtain fullroot and install SuperSu or use latest update script by me.
What needed :
Galaxy Core 2 phone with android 4.4.2 able to goto stock/custom recovery, no other preroot attempts needed like preinstalled busybox,preinstalled init.d, because all this need the preroot access and installation.
This update zip is made specialy for G355HN devices. Tested on Galaxy Core 2 SM-G355HN on 4.4.2 Android on both stock roms available,
but it should work on some devices Galaxy Core 2 with stock/custom recovery.
How to :
Code:
1. Shut down your phone until last vibe ... it's OFF !
2. Enter stock recovery - hold 3 buttons (Menu + Power + Vol up)
3. After init select "apply update from external storage", press power button to enter
4. Select the previous downloaded zip . The file you have previously copied to extSdCard - and press power button ...
5. The script will run ...
6. If all goes ok, your phone should be rooted.
7. After boot android will upgrade - Superuser apk ask for update su binary.
8. No internet connection is neccessary for this step ... Select continue,normal way and wait for the success.
9. Hit thanks if it worked 4 you
Thanks for Superuser and binary goes to Chainfire
Powered by SuperSu !
And finaly :
About OTA updates and system status, CF Auto root options :
After rooting the device your system status will become custom ( Device status : Custum ).
You can check it in Odin mode ( download mode ), check current BIN and System status .
You can reset binary flash counter with Triangle Away but you cannot fool OTA update program so easy.
When you are rooted you can't check for updates OTA. There was a lot of chat about whether you had to defrost various apps etc. to fool the update feature. Using Wanam Exposed, under "Security Hacks" you get the option to change (fake) "System status" from "Custom" setting to "Official", and thus allowing you to check OTA using Samsungs update feature. Much easier than having to check Sammobile every day. Hope it helps someone.
... but the OTA removes root, so you have to root the updated version again. The almost same is with GravityBox.
CF auto root by Chainfire is still not available for GC2. Still waiting for it.
Any other posts regarding those 3 questions will be deleted by moderators.
Feel free to post any other questions and infos regarding rooting your devices and root feedbacks/errors.
Updates & version infos :
Hit thanks if it worked for you
Feel free to post feedback !
Attached files are fullroot files with su binaries and app installed ( version info included ).
SuperSu apk from ChainFire: http://download.chainfire.eu/supersu
Updated 15.3.2015 : added 2.46 zip for any kind of recovery
Updated 29.3.2015 : SuperSu 2.46 - KingUser removal.zip for any kind of recovery
Added extra help for removing KingUser (4.0.0.) - To remove KingUser run '/system/bin/uninst_king.sh' with root perm
Fixed SU ddexe problems in install SuperSu
Updated removal of other root progs
This is only for GC2 phones !
KU (KingUser) removal
The uninst_king.zip contains uninst_king.sh for removing KU data and apps, you can manually uninstall KU via application manager.
Updated 2.4.2015
v2.47 by StratOS
- Improved SuperUser King removal
direct link to CF download TWRP - SuperSu 2.47
Updated 2.4.2015
v2.48 by StratOS
direct link to CF download TWRP - SuperSu 2.48
Updated 2.5.2015
New version of su binary
v2.49 by StratOS
direct link to CF download TWRP - SuperSu 2.49
Looking forward for more infos and feedback. Hit thanks if this is helpfull !
Hi sir
hi good day Iam new here, I want to root my phone samsung galaxy core 2 duos (SM-G355H) 4.4.2 kitkat
Iam comfuse which version Am I going to use
this one - Fullroot_su_2.35_Samsung_Galaxy_Core_2
or
this - Supersu_2.39_StratOS in attachment
thanks and advance
crisecure said:
hi good day Iam new here, I want to root my phone samsung galaxy core 2 duos (SM-G355H) 4.4.2 kitkat
Iam comfuse which version Am I going to use
this one - Fullroot_su_2.35_Samsung_Galaxy_Core_2
or
this - Supersu_2.39_StratOS in attachment
thanks and advance
Click to expand...
Click to collapse
They are all the same, accept version of su binary and application.
Hey man, i know this is an off-topic, the issue regarding rooting our device is that ,we cannot anymore update our phone. so i will share my experience after rooting my phone,so this is what happen,when i flash my stock ROM with the official firmware for galaxy core 2 duos(not from sammobile) my motherboard was damaged.the screen is dead but the phone is running but without display
novhexzhen said:
Hey man, i know this is an off-topic, the issue regarding rooting our device is that ,we cannot anymore update our phone. so i will share my experience after rooting my phone,so this is what happen,when i flash my stock ROM with the official firmware for galaxy core 2 duos(not from sammobile) my motherboard was damaged.the screen is dead but the phone is running but without display
Click to expand...
Click to collapse
You can always update your phone via odin,kies or any other updates, only OTA updates are not possible - for now, accept if you flash stock and update it throught OTA.
thanks sir
my phone is now rooted
Thank you, thank you and thank you, thank you so much for doing this, you're awesome!
I've rooted my GC2 and it's awesome now.
not worked for me
StratOS_HTC said:
Greetings.
Since many users proposed to me to create a new thread for fullroot of Galay Core 2 phones, I decided to do so.
It's fullroot edition powered by SuperSu, not kinguser.
Thanks for Superuser and binary goes to Chainfire
The root for lolipop or any updates, custom rom will be made after the port/custom rom/update.
What needed :
G355.. phone with android 4.4.2 able to goto stock recovery, no other preroot attempts needed like preinstalled busybox,preinstalled init.d, because all this need the preroot access and installation.
This update zip is made specialy for G355H... devices. Tested on Galaxy Core 2 SM-G355HN on 4.4.2 Android,
but it should work on all devices Galaxy Core 2.
Initial support for Android 5 is enabled little more changing needed when the port or release will appear
How to :
1. Shut down your phone until last vibe ... it's OFF !
2. Enter stock recovery - hold 3 buttons (Menu + Power + Vol up)
3. After init select "apply update from external storage", press power button to enter
4. Select the previous downloaded zip . The file you have previously copied to extSdCard - and press power button ...
5. The script will run ...
6. If all goes ok, your phone should be rooted.
7. After boot android will upgrade - Superuser apk ask for update su binary.
8. No internet connection is neccessary for this step ... Select continue,normal way and wait for the success.
9. Hit thanks if it worked 4 you, you can update the su binary and apk throught Google Market
Latest superuser & binary - pseudo included in this update ( For lolipop 5 ). Still waiting for the Lolipop to come for our phone or at least port.
Thanks for Superuser and binary goes to Chainfire
Powered by SuperSu !
Looking forward for more infos and feedback.
Hit thanks if it worked for you
Feel free to post feedback !
Attached files are fullroot files with su binaries and app installed ( version info included)
Click to expand...
Click to collapse
This didnt worked for me!!
Wipes o anything else is needed? I'm asking because is my girlfriends phone which I'm trying to root, I don't want to brick it
Sent from my ALCATEL ONE TOUCH 5036A
Nope, I have the Samsung Galaxy Core II SM-G355HN. It's completely new, bought through my mobile carrier. I updated the mobile to the latest version, 4.4.2.
Then I just intruduced a microSD card, transferred the required zip, and followed the easy steps. I've been using my GC2 for 2 days and I'm so happy I found this thread. I removed all the bloatware and all the apps I didn't want, then I installed Nova launcher and now this phone is so fast. I recommend you to install Nova launcher cause, in spite of being way faster and quite more responsiveness than anything else I've seen, the Touchwiz version that comes with this phone is awful, it's different from any other Samsung interface I've ever seen, I hate it. Besides, Nova is ultra customizable, I love it so much that I bought the PRO version. With the stock Touchwiz of the GC2, you can't even create a shortcut to "Manage Applications".
Cheers!
StratOS_HTC said:
Greetings.
Since many users proposed to me to create a new thread for fullroot of Galay Core 2 phones, I decided to do so.
It's fullroot edition powered by SuperSu, not kinguser.
Thanks for Superuser and binary goes to Chainfire
The root for lolipop or any updates, custom rom will be made after the port/custom rom/update.
What needed :
G355.. phone with android 4.4.2 able to goto stock recovery, no other preroot attempts needed like preinstalled busybox,preinstalled init.d, because all this need the preroot access and installation.
This update zip is made specialy for G355H... devices. Tested on Galaxy Core 2 SM-G355HN on 4.4.2 Android,
but it should work on all devices Galaxy Core 2.
Initial support for Android 5 is enabled little more changing needed when the port or release will appear
How to :
1. Shut down your phone until last vibe ... it's OFF !
2. Enter stock recovery - hold 3 buttons (Menu + Power + Vol up)
3. After init select "apply update from external storage", press power button to enter
4. Select the previous downloaded zip . The file you have previously copied to extSdCard - and press power button ...
5. The script will run ...
6. If all goes ok, your phone should be rooted.
7. After boot android will upgrade - Superuser apk ask for update su binary.
8. No internet connection is neccessary for this step ... Select continue,normal way and wait for the success.
9. Hit thanks if it worked 4 you, you can update the su binary and apk throught Google Market
Latest superuser & binary - pseudo included in this update ( For lolipop 5 ). Still waiting for the Lolipop to come for our phone or at least port.
Thanks for Superuser and binary goes to Chainfire
Powered by SuperSu !
Looking forward for more infos and feedback.
Hit thanks if it worked for you
Feel free to post feedback !
Attached files are fullroot files with su binaries and app installed ( version info included)
Click to expand...
Click to collapse
Hi its not working for me too :/ Superuser saying im using 4.3 then my phone is 4.4.2 so could u explain me that?
You don't need to install SuperSU first, it's automatically installed when rooting. I think you gotta have a 4.4.2 GC2. Why don't you update it through Settings/About device/Software update?
Burundukas said:
Hi its not working for me too :/ Superuser saying im using 4.3 then my phone is 4.4.2 so could u explain me that?
Click to expand...
Click to collapse
jasbinkarki said:
This didnt worked for me!!
Click to expand...
Click to collapse
First of all read the thread. Mine root zip's are powered by SuperSU and not superuser !
If you have problem please state the problem what are you using and how . BUT FIRST READ THE THREAD CAREFULLY !!!!
worked for me.
This totally worked for me.. from rooted kinguser you'll need to flash it again to stock after that it went out smoothly... Thank you so much buddy... if you ever going here in Philippines, the beer and the chicks are on me.
No need to do that.The recovery update flashable zip first deletes all posible root apks and binary and cache data.Then installs the SuperSu apk and binary.
It works on stock recovery only.
Sent from my SM-G355HN using XDA Free mobile app
Hi, StratOS_HTC, I have a problem with my Samsung Galaxy Core II.
Everything is working fine, but when I check for new updates through "Settings/About device/Software update/Update", a pop-up message appears and says something like:
"Your software has been modified, you can't update"
If I go to "Settings/About device/Status/Device status", it says Custom, and I've read that in order to update the phone through carrier's way, the Device status should be Normal, not Custom. These are the solutions I've found, though I haven't tried them, cause may be I shouldn't update the phone.
If it says modified then you could try booting into recovery (I'm unsure how, don't have the device) and wiping your cache, then rebooting. There may be lingering fragments of data in your cache from previous updates that are causing the modified message to appear.
Click to expand...
Click to collapse
I unmounted the sd card, rebooted, now the status says Official. Checked for updates, now it works.
Click to expand...
Click to collapse
I have the Samsung Galaxy Core II SM-G355HN with Android 4.4.2 (the one that came with the phone). I've rooted it using your method, I have SuperSU, I also installed Xposed framework and GravityBox so I can make some tweaks that I really need in order to use my phone as I want. I also use Nova launcher.
Which one of those things is not allowing me to update the Core II? Is it root? Xposed framework may be? Or the tweaks I've made with GravityBox module?
Thank you!
"Your software has been modified, you can't update"
Samsung has made their own check programs during boot,recovery and OTA update.
The system status changed if you root the phone. The partition can be written to (rw), so primary the whole update procedure or modified system has primary been modified just because of the root procedure and Samsung checks.
You can change the status via Chainfire's TriangleAway, but not the whole OTA procedure.
If you read the post regarding Samsung checks you will find a lot of stuff, but primary the GC2 stuff is different.
Wiping the cache and unmounting SDCard doesn't work for out phone if you want to update throught OTA.
Use Kies and Odin.
Not working OTA update is tipicaly just because of the root and rooting and samsung checks.
You can update/flash it throught Kies/Odin. and root it again or use the rooted integrated roms/flashes.
All right, first of all:
Where can I see the release notes of the new update? May be the update is not worth this whole process...
Second, if I download Kies and update the phone through Kies, do I lose all my data in the phone?
Can I update it using Kies the normal way? I mean, connect the phone, open the program and click update.
Thanks!
So how can i do unroot
It works for me. So how can i do unroot. For personal reasons(I can not install app to external card)
In SuperSu apk there is a option "full unroot" use this for it.
You can use some apps to install or move apps to extSdCard.
But I think that stock kernel support only fat filesystem of extSdCard,correct me if I'm wrong,havent tried it.It would be great to have some ext partition and swap on extSdCard too,but for that we will have to recompile and add modules for fs to kernel.
Sent from my SM-G355HN using XDA Free mobile app
Ways to root your Samsung Galaxy Tab 4 7.0All of the guys on the list is tested by me and it's working
For those guys who can't root their tablet, this thread is the right place for you
1. This is the Easiest Way to Root your tablet
KingRoot App Download it here
http://www.appsandroidapk.com/apk/kingroot-v4-6-2-apk-file-for-android/
Download the app
Before installing it Go to Settings > General Tab > Security > and Enable "Unknown Sources"
Install the app and Root your phone.
You might wanting to have a SuperSU instead of kingroot's SU
Google it SuperSU Me Download the latest version or you can find it here in this link
http://forum.xda-developers.com/general/paid-software/supersu-please-t3110954
Update the SUBinary
Reboot
2. KingoRoot App apk version
Download Link
https://root-apk.kingoapp.com/
Download the app
Before installing it Go to Settings > General Tab > Security > and Enable "Unknown Sources"
Set your device atleast 10 minutes before sleep due to inactivity
Install and Root your Device
Do nothing while rooting "Like tapping or bringing down the notification bar" this is why i make you set the 10minute-sleep
1st/2nd attempt might fail but on the other hand it will succeed
You might wanting to have a SuperSU instead of kingoroot's SU
Google it SuperSU Me Download the latest version or you can find the link here
http://forum.xda-developers.com/general/paid-software/supersu-please-t3110954
Update the SUBinary
Reboot
3. Root Using TWRP (old)
Requirements
TWRP link is here
http://forum.xda-developers.com/attachment.php?attachmentid=3128455&d=1421957427
Important: Odin3 v1.85 Direct download Link
http://forum.xda-developers.com/attachment.php?attachmentid=581913
PC
On your pc Open Odin3 v1.85
Click PDA and choose the tar file that you've downloaded
Tick Auto Reboot and F. Reset time
Now go to your device, Boot into download mode ( Power it off wait until it vibrates then press Home,Power and Volume Down Simultaneously)
Plug your device into your Computer (Install drivers here's the link http://www.mediafire.com/download/o3exocwabcxax3b/SAMSUNG_USB_Driver.exe)/ Some Pc install drivers automatically just wait them to install or if you already install the drivers skip driver installation procedure)
Click Start if the Odin detects your phone, your phone will automatically reboot
Now Boot your phone into Recovery Mode by (Turning it off and Press Power + Home + Volume up)
It will boot into TWRP
Press Reboot > System and it will ask you if you want to get root and swipe it to install
Update SuperSU and make another reboot
You can also update your TWRP using this zip file
https://www.androidfilehost.com/?fid=24052804347818249
Now if you really can't root your tablet and you're desperate, try another version of your stock firmware, you can find your stock firmware on Google, after that do this procedure again
Done.
Other Links to make your tab Rooted
http://forum.xda-developers.com/showthread.php?t=3111934
http://forum.xda-developers.com/tab-4/help/twrp-install-twrp-root-samsung-galaxy-t3095736
Developers that has credit on all of this
@BRoy_98
@pinksworld
@gatesjunior
and sorry if i haven't mentioned the others, i dont know who to give credits
SORRY SOME OF MY ENGLISH IS REALLY BAD
Yay another one, I think this is the fourth of this same exact thread
You might want to mention how kingroot/kingoroot send your personal data to Chinese servers and the twrp builds you linked to only work fur the SM-T230, SM-T230NU, and SM-T231, and will not work for any of the several other Tab 4 7" variants
Just imagine that I just put all those threads together ahaha: )
thisisapoorusernamechoice said:
Yay another one, I think this is the fourth of this same exact thread
You might want to mention how kingroot/kingoroot send your personal data to Chinese servers and the twrp builds you linked to only work fur the SM-T230, SM-T230NU, and SM-T231, and will not work for any of the several other Tab 4 7" variants
Click to expand...
Click to collapse
I dunno if that issue is real, but no worries we have supersu me
thisisapoorusernamechoice said:
Yay another one, I think this is the fourth of this same exact thread
You might want to mention how kingroot/kingoroot send your personal data to Chinese servers and the twrp builds you linked to only work fur the SM-T230, SM-T230NU, and SM-T231, and will not work for any of the several other Tab 4 7" variants
Click to expand...
Click to collapse
I dont think that if you install first supersu me and then kingroot your tab, after root turn wifi off and use supersu me, no data sent to anyone........ anyways it doesnt send your passowords etc to china, just like browser data and few app datas.... but theres no way to get passwords.... all are crypted or hidden well in smali
thelous said:
I dont think that if you install first supersu me and then kingroot your tab, after root turn wifi off and use supersu me, no data sent to anyone........ anyways it doesnt send your passowords etc to china, just like browser data and few app datas.... but theres no way to get passwords.... all are crypted or hidden well in smali
Click to expand...
Click to collapse
I wouldn't be sure about that. If you type in your password, once rooted, anything can easily capture the keyboard input and log it or send it out. Let me elaborate. It's like the guys who say, "Hey I have a firewall installed so it cannot communicate out." Yeah, o.k., so all the firewalls do is manage IPTABLES, so if I am an application and have root access, I can do what I want to avoid your firewall rules quite easily. Just a thought.
Hmm, updating the binary will remove the @#$%&* thing , we're just going to use the app to root our phone, and I guess wiping cache and dalvik is necessary
BTW tab 4 is best for gaming because of it looks and size but due to a stupid Samsung company, 1.2ghz + vivante gc1000 expect lagging, I hope some kind hearted will make a custom kernel for overclocking this tab.
BTW There's no Tex plugin on gltools, installing default will not work, so you have to find a cracked version of gltools, well if you do that... R.I.P expect force closes
gatesjunior said:
I wouldn't be sure about that. If you type in your password, once rooted, anything can easily capture the keyboard input and log it or send it out. Let me elaborate. It's like the guys who say, "Hey I have a firewall installed so it cannot communicate out." Yeah, o.k., so all the firewalls do is manage IPTABLES, so if I am an application and have root access, I can do what I want to avoid your firewall rules quite easily. Just a thought.
Click to expand...
Click to collapse
Well i didnt say anything about firewalls i was daying if you manually disable wifi and use king root, it wont be able to connect anywhere to send any data.... also you can search by date and time files made during root session and remove everything to prevent any keyloger to work
Have ODIN and a stock image ready!!!
Be careful with this root process! The sm-t237p 5.1.1 OH7 boot loops and won't hold the root or Philz recovery... Yet!:cyclops:
thelous said:
Well i didnt say anything about firewalls i was daying if you manually disable wifi and use king root, it wont be able to connect anywhere to send any data.... also you can search by date and time files made during root session and remove everything to prevent any keyloger to work
Click to expand...
Click to collapse
No. I can easily change the file and date stamp to match any given system file you already have so that it is not easy to find. Also, Kingroot will not run correctly and root your device properly if it cannot contact it's servers to download the proper exploit for your device. Now, if you are talking about disabling wifi only so that Kingroot cannot contact it's servers after you are rooted, well, if you use any data what so ever, it can use that same data connection. As an example, I have to have data of some type to login to my bank site, etc..
SM-T237P Specific maybe others with PhilZ recovery...
Root Success! Check this out... http://forum.xda-developers.com/showpost.php?p=64182938&postcount=15
gatesjunior said:
No. I can easily change the file and date stamp to match any given system file you already have so that it is not easy to find. Also, Kingroot will not run correctly and root your device properly if it cannot contact it's servers to download the proper exploit for your device. Now, if you are talking about disabling wifi only so that Kingroot cannot contact it's servers after you are rooted, well, if you use any data what so ever, it can use that same data connection. As an example, I have to have data of some type to login to my bank site, etc..
Click to expand...
Click to collapse
Well, atleast my bank account cant be logged with different ip and if its tried i recice message wheres code that you need write to bank website to access account.... however i havent lodt any accounts yet after rooting with kingroot, it has so manynusers that they cant check all information they recive, just like facebook and whatsapp... (they're spying watnu do but they have too many users so it would take like unlimited time to check all accounts and keybindings thru.....
K94U said:
Root Success! Check this out... http://forum.xda-developers.com/showpost.php?p=64182938&postcount=15
Click to expand...
Click to collapse
You can use any kind of cwm to flash a zip file that can root your device, This was an alternative way, just find a cwm to flash hehe
Siegharf said:
You can use any kind of cwm to flash a zip file that can root your device, This was an alternative way, just find a cwm to flash hehe
Click to expand...
Click to collapse
Flashing recovery trips KNOX (no warranty or OTA updates) and the other method sometimes doesn't... Also, the recovery/zip method stopped working on lollipop and marshmallow with the older SuperSU builds but... Chainfire has a new BETA SuperSU 2.6X that is a systemless root and now working on the newer Android builds using the recovery/zip method. This seems to work for mostly ALL Samsung and Nexus devices... Read about it here:
http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
I restored my nandroid backup in recovery just to try this on my sm-t237p lollipop and it worked the first time!!! All apps get root access OK except es file explorer(now bloatware anyway)... You might need to install busybox for things to work... :good: :laugh:
K94U said:
Flashing recovery trips KNOX (no warranty or OTA updates) and the other method sometimes doesn't... Also, the recovery/zip method stopped working on lollipop and marshmallow with the older SuperSU builds but... Chainfire has a new BETA SuperSU 2.6X that is a systemless root and now working on the newer Android builds using the recovery/zip method. This seems to work for mostly ALL Samsung and Nexus devices... Read about it here:
http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
I restored my nandroid backup in recovery just to try this on my sm-t237p lollipop and it worked the first time!!! All apps get root access OK except es file explorer(now bloatware anyway)... You might need to install busybox for things to work... :good: :laugh:
Click to expand...
Click to collapse
There's kies or custom ota flashing
K94U said:
Flashing recovery trips KNOX (no warranty or OTA updates) and the other method sometimes doesn't... Also, the recovery/zip method stopped working on lollipop and marshmallow with the older SuperSU builds but... Chainfire has a new BETA SuperSU 2.6X that is a systemless root and now working on the newer Android builds using the recovery/zip method. This seems to work for mostly ALL Samsung and Nexus devices... Read about it here:
http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
I restored my nandroid backup in recovery just to try this on my sm-t237p lollipop and it worked the first time!!! All apps get root access OK except es file explorer(now bloatware anyway)... You might need to install busybox for things to work... :good: :laugh:
Click to expand...
Click to collapse
235 LTE 5.1.1 rooted as well
http://forum.xda-developers.com/showpost.php?p=64255121&postcount=1
(not spamming in case anyone got the idea)
I hired someone not super familiar with flashing a custom rom, but who knew more than me. We got MM installed but I am having some problems. First, the only reason, I updated the rom was to get mirroring. However: 1. there is no mirroring, but there is cast. I have a Tab 4 and mirroring works perfectly with it and KitKat. I tried about 5 mirroring apps from the Play Store and they all require that the Smart TVs I have (Samsung and LG) be connected to the Internet because using the TV's internet connection is a major nuisance for me. That is not required with my KK Mirroring, and I am wondering whether I should get rid of MM and flash KK. Or, is there an app that will work without mirroring. 2. My SD card is now invisible. When I link my Tab to my windows 7 computer, my SD card doesn't show. (Additionally, come to think of it, none of my files show. All I get is an image of 5100, but when I click on it nothing shows on my windows 7 computer.) 3. Probably related to No. 2 -- Some apps seem to install, but I have no way to access them because no shortcut is placed on the screen and I have no tree of files. (Titanium Backup for instance, can't be accessed. However, when I downloaded ai-keyboard, it mostly worked)
Hate to ask so many questions, but this is what I now have. Would call the person who did the flash, but his wife is due any day, and for all I know, gave birth yesterday.
which M Rom did you installed? kindly mention Rom and recovery build number as well.
are you using any other home launcher than the default? how did you installed titanium backup? normal or copy pasted apk to the system partition?
have you checked the luncher setting? for instance I can hide some apps from the nova launcher but can find it with it's search bar.
check with the default launcher or any other.
did you unlocked the tab while it was connected to your pc? did you changed the mode to MTP?
I haven't tested screen mirroring with this device. although I checked briefly with a Samsung S, S4 and a G3 on a LG smart tv with webOS 3 using LG TV plus app, I had to be on a same network with wifi hotspot enabled from my device (didn't required a working internet) and selecting LG tv plus option from the TV.
I still haven't been used to with screen mirroring and cast. so others can help.
Hi Billys,
Thanks a lot for your response. My Internet has been down for about 2.5 days and that is the reason I am late responding to you. The CM version was 13.0.20160222-2140-UNOFFICIAL -P5110. The CM Recovery Version was GT-P5113 CM Recovery 6.0.1.0.tar.
The Launcher is the default that comes with MM. I installed Titanium Backup through the Google Play Store. I have been fooling around with the device and Root checker basic says that root access is not properly installed, which might explain why Titanium Backup is not working. Also, SuperSu won't open.
You asked me: "did you unlocked the tab while it was connected to your pc? did you changed the mode to MTP?" Don't understand the questions, particularly the second one. If you could be more explicit maybe I could answer the question. Thanks again for your help.
decijp said:
Hi Billys,
Thanks a lot for your response. My Internet has been down for about 2.5 days and that is the reason I am late responding to you. The CM version was 13.0.20160222-2140-UNOFFICIAL -P5110. The CM Recovery Version was GT-P5113 CM Recovery 6.0.1.0.tar.
The Launcher is the default that comes with MM. I installed Titanium Backup through the Google Play Store. I have been fooling around with the device and Root checker basic says that root access is not properly installed, which might explain why Titanium Backup is not working. Also, SuperSu won't open.
You asked me: "did you unlocked the tab while it was connected to your pc? did you changed the mode to MTP?" Don't understand the questions, particularly the second one. If you could be more explicit maybe I could answer the question. Thanks again for your help.
Click to expand...
Click to collapse
Device specific builds are too outdated. Kindly flash these depending on your model
Espresso3g - P3100 & P5100
EspressoWifi - P3113, P5113, P3110, P5110
For more info, visit this thread http://forum.xda-developers.com/gal...fied/rom-cyanogenmod-13-cm13-0-t3303798/page1
And flash it with the latest TWRP recovery found on andi34.github.io under recoveries
Sent from my espresso3g using XDA Labs
Root is enabled through developer options. Go settings, about tablet. Tab build number 7 times. Back out and open dev options. Scroll down a bit and enable roo & adb. You should be good to roll then
Sent from my SAMSUNG-SM-G870A using XDA Free mobile app
Champ1919,
I did what you suggested and was able to download TWRP from Andi's. I unzipped the file with the ES File Explorer. Nothing happened. Could you tell me what I should do next. Thanks again.
decijp said:
Champ1919,
I did what you suggested and was able to download TWRP from Andi's. I unzipped the file with the ES File Explorer. Nothing happened. Could you tell me what I should do next. Thanks again.
Click to expand...
Click to collapse
if you want install or upgrade twrp, dont extract the zip. boot into recovery and install it with your current recovery.
decijp said:
Hi Billys,
You asked me: "did you unlocked the tab while it was connected to your pc? did you changed the mode to MTP?" Don't understand the questions, particularly the second one. If you could be more explicit maybe I could answer the question. Thanks again for your help.
Click to expand...
Click to collapse
when you connect the tab to PC, there is a logo of CM in the status bar, drag the notification menu, and tap the CM menu, there, check If MTP is enabled or it's set on charging only mode. you can also set this in setting-developer. make sure the keypad is not locked as well
billysam said:
when you connect the tab to PC, there is a logo of CM in the status bar, drag the notification menu, and tap the CM menu, there, check If MTP is enabled or it's set on charging only mode. you can also set this in setting-developer. make sure the keypad is not locked as well
Click to expand...
Click to collapse
Billys,
There was no CM logo, but went to settings and USB and you were right. Now I can view the files of my tablet on my PC. Thanks a lot.
Smart-T "if you want install or upgrade twrp, dont extract the zip. boot into recovery and install it with your current recovery. "
I did the recovery boot, and it shows CWM v. 6.0.1.0. It also shows install zip from sd card. However, I have multiple zips on my sd card. How can I be sure that it is installing the right zip? Will it automatically grab the right zip file.?
decijp said:
Smart-T "if you want install or upgrade twrp, dont extract the zip. boot into recovery and install it with your current recovery. "
I did the recovery boot, and it shows CWM v. 6.0.1.0. It also shows install zip from sd card. However, I have multiple zips on my sd card. How can I be sure that it is installing the right zip? Will it automatically grab the right zip file.?
Click to expand...
Click to collapse
It won't automatically get the zip file because you select the zip you flash. Just navigate to whet you put the zip and flash that
Sent from my espresso3g using XDA Labs
decijp said:
Smart-T "if you want install or upgrade twrp, dont extract the zip. boot into recovery and install it with your current recovery. "
I did the recovery boot, and it shows CWM v. 6.0.1.0. It also shows install zip from sd card. However, I have multiple zips on my sd card. How can I be sure that it is installing the right zip? Will it automatically grab the right zip file.?
Click to expand...
Click to collapse
install the latest twrp by using cwm. after install reboot back into recovery. you shuold see the graphical differences between twrp and cwm.
To make a long story short, it appears that my Superuser is misbehaving. Used root checker to analyze and it found that Superuser was installed and that SU Binary files were installed. However, it found a Root User Account Error. (Error: stderr: null, stdout: null, exit..value: 1) It suggested that I reinstall Superuser app from TWRP. .
After much experimentation, I can get into TWRP when I reboot in the recovery mode. (not when I hit the icon on home page -- tells me I need root access) When I hit install, I see CWM 13, An android 4.4 (omni-4-4-4-20160305-1323 expresso-HOMEMADE.zip) and a gapp 6 --- a long time ago when I downloaded 4.4, I didn't know how to get to the corresponding gapp, so I didn't do so. Also, SuperUser doesn't show up at this place, so I don't know how to reinstall it.
Can anyone tell me how to reinstall Superuser and get full SuperUser access?
Also, I am thinking of going back to Android 4.4 to get mirroring. Can someone point me to the gapp file for that. Additionally, when I possibly would be installing 4.4, would I first install 4.4 and then reboot and install gapps. Or should 4.4 and gapps be installed at the same time?
Thanks for everyone's help. Sorry to ask so many questions. However, have gone to youtube and web many times and still am confused about what is going on.
decijp said:
To make a long story short, it appears that my Superuser is misbehaving. Used root checker to analyze and it found that Superuser was installed and that SU Binary files were installed. However, it found a Root User Account Error. (Error: stderr: null, stdout: null, exit..value: 1) It suggested that I reinstall Superuser app from TWRP. .
After much experimentation, I can get into TWRP when I reboot in the recovery mode. (not when I hit the icon on home page -- tells me I need root access) When I hit install, I see CWM 13, An android 4.4 (omni-4-4-4-20160305-1323 expresso-HOMEMADE.zip) and a gapp 6 --- a long time ago when I downloaded 4.4, I didn't know how to get to the corresponding gapp, so I didn't do so. Also, SuperUser doesn't show up at this place, so I don't know how to reinstall it.
Can anyone tell me how to reinstall Superuser and get full SuperUser access?
Also, I am thinking of going back to Android 4.4 to get mirroring. Can someone point me to the gapp file for that. Additionally, when I possibly would be installing 4.4, would I first install 4.4 and then reboot and install gapps. Or should 4.4 and gapps be installed at the same time?
Thanks for everyone's help. Sorry to ask so many questions. However, have gone to youtube and web many times and still am confused about what is going on.
Click to expand...
Click to collapse
If you installed CM13, is actually pre rooted. Just enable it from the developer settings
Sent from my espresso3g using XDA Labs
Finally figured out that I could transfer SuperSu zip file to my Tab and then install it from TWRP. Did so and also wiped clean the cache and now SuperSu is functional and I can get rid of the bloatware and speed up the Tab. Thanks for everyone's help.