Database Info

Urgent HELP needed - can't stop the x2 restarting itself

Good Day,
Have been trying to reset my X2 for a week !
Trouble when upgrading to B209
(I got to stock B209 but then when I flashed KANGVIP B209 slim it all went wrong )
I need to get my device back to how it was on B112
I have a Huawei Backup of Apps + Data and also a TWRP nandroid image backup of my B112 system
Desperate to get back ..................but can't without the device constantly restarting itself with a grinding noise
I had this problem once before and recovered from it but seem unable to now and I have forgotten how I did it.....please HELP !
I have the stock B112 extracted
I have fastboot flashed the boot.img, cache.img, cust.img, recovery.img and system.img
I am getting to a stock B112 device but then it restarts itself
I even tried flashing from TWRP the universal-cust-b112.zip file but that does not cure it
Please help me guys...I need my device back stable and my apps and data back
Step by Step please ...............I am ok with fastboot (a little knowledge of ADB) and TWRP but still need full working instructions !
Thank you

this worked for me
you can read it in the SimplyGoogle Thread last page what happend.
coming back from Kangvip_Slim_B209
Hi,
i managed to go to KangVipSlimB209. After trying a few things with the help from audioralf i decided to try to go back to SimplyGoogleB112 following the Thread "Safe way to get back to B112 (android 5.1.1) from B205 or B209 (android 6.0) ."
It didn´t worked
This is what i did after that :
1. Flash B112 Stock Images with ADB
Reboot
No Simcard Options, No carrier, Audio Problem and reboot again after unlock Lockscreen
Flash TWRP5.1.1
Factoryreset in TWRP
Boot into Bootloader
Flash Recovery B112
Reboot
After Factoyreset always no reboot after unlocking Lockscreen
2. After minimal Setup do a EMUI DLOAD GEM-703L_EMUI3.1_Android5.1_V100R001C233B112
Failed
Flash TWRP5.1.1
install SimplyGoogleB112
Factoryreset in TWRP
It worked
Problem now : My Phonememory ist diplayed in Settings 32GB but only 289MB free. Internal SD has only 3.86GB (already used 3,56GB)
I deleted the Custfolder and installed UniversalCust-B112, but no change.
I deleted the Custfolder again and installed UniversalCust-B209, also no change.
Is there a way to get internal SD back to 32 GB ?
Thanks for your help,
Sebastian Neumann
fixed
Hello,
thanks to audioralf i was able to fix the SDcard Problem.
Emui Factoreset with SD Format
The Factoryreset faild but the SD Card has the right size now.
Got wrong Informations in about System.
Reinstalled SimplyGoogle and everything is ok now
I wait for offical Anfroid 6 and a SimplyGoogle based on Android 6
Greetings,
Sebastian Neumann

I used to be like you, would like to share some experience with you, firstly you must reflash rom KANGVIP_SLIM_B209 by reinstalling TWRP-ENG-6.0: Huawei MediaPad X2 connected to the computer, hold down the button at the same time source and volum - to enter the bootloader, ADB and fastboot open Minimal, in fastboot flash recovery TWRP-ENG-6.0.img, hold the power button at the same time and on the team to win volum + v2.8.7.0 recovery project, in Wipe, ADVANCED WIPE on, marking the start of Dalvik Cache 4; System; Cache, Data, done repeatedly, to install KANGVIP_SLIM_B209 selected in the external storage card, after completing the installation KANGVIP_SLIM_B209, reconnected to the computer, copying all data from the memory of the computer.
Then you continue working under the guidance of the article vuhongduong Safe Way to Get back to B112 (android 5.1.1) B205 or B209 from (android 6.0)
Wish you luck and success

How to flash back from B209 to B112 then update to B211

If you were already on stock B209 and want to go back to B112 and then update to B211 this guide is how I did it and what you need to do.
1) Wipe everything in TWRP including /cust
2) Fastboot flash stock B112 boot,cache,cust,system and userdata img files (For 703L flash recovery.img as well and skip steps 3 & 4)
3) Boot into TWRP and flash B112 Universal Cust Mod
4) Boot into bootloader and fastboot flash stock B112 recovery.img
5) Let the phone boot up
6) In settings do a factory reset. If you get reboots right after unlocking the screen shut the phone down then hold in vol up + power to boot into recovery
and wipe cache and data. Make sure the phone is not plugged into your computer when doing this.
7) Put the stock B211 update.zip in a dload folder in your internal storage
8) With the phone off hold in vol up + vol down + power to boot into upgrade mode. It should start installing B211.
9) After the install is finished boot up the phone and in settings do a factory reset so your information in About Phone is correct again.
10) Flash TWRP through fastboot then boot into TWRP and flash the B211 Universal cust mod if your About Phone information is wrong and flash my Systemless SuperSU to root.

Stuck on Huawei Mediapad Logo

Hi
my mediapad x2 was rooted and all was fine, then I had to format it and give to a friend.
So i did a wipe cache and everything from recovery , and after that my phone is stuck
When I start it stuck on first huawei logo and doesnt go forward.
I can enter just the "fastboot&rescue mode" but PC doesnt recognize it, not even Hi suit.
anything to fix it ?
thanks

Are you on Twrp and format System?
then it is clear that it will not start,if it is so, then install a Rom
Which Version LP or MM?

letschky said:
Are you on Twrp and format System?
then it is clear that it will not start,if it is so, then install a Rom
Which Version LP or MM?
Click to expand...
Click to collapse
no Had trwp but after all wiping I did on Twrp menu, its back to huawei recovery and "fastboot&rescue mode" white page
Im on 701l
any link to follow ?
thanks

You do not have backup made in TWRP from your original Software?

No didnt do it, im such a noob.
Well I can enter TWRP , didnt realize how to do it till today
How Can I know which model Im using ? Months passed and forgot. I only remember I rooted it.
thanks

on Android 5.0 i think,there is no Update.app or Update.
When boot into Twrp and from Twrp Boot into System,says no OS installed?
I think audioralf can help you,he has an 701L
maybe that helps but I would ask audioralf
http://forum.xda-developers.com/mediapad-x2/general/how-to-flash-rom-gem-701-702-703-t3293795

I found my order list of amazon and I bought the 703
I can log into Twrp
any link to file to install that work ?
thanks

which version on it,Android 5.1.1 or 6.0?
on 5.1.1,
Download B112 and Copy in SD Card in dload Folder.
Extract the UPDATE.APP with Huawei Extractor and extract System.img,Boot.img,Cache.img,Recovery.img and Cust.img and flash all the img Files with Fastboot.
Power off the Device and Press Volume+ and- and Power Button at same Time to boot in Recovery,this flash the UPDATE.APP
wait to finish and you have 5.1.1 on it

or Download this Backup B112 unpack it,Copy in Sd Card TWRP/BACKUPS/N7MXXXXXXX/B112_Backup
(But only the win,info and win000 and win001 files in the last Folder)
https://www.androidfilehost.com/?fid=24459283995300905

Another guy has a bootloop. Help greatly appreciated

Hi
I'm quite sure i have moved form 701L (B03) to 703L (B112) succesfully, but then i made first mistake to flash NearStockB111.zip and after that......
don't ask a lot of mistakes... Last thing was to try with fastboot to flash all the B015 files (with and without recovery, with TRWP 5.0), but still bootloops.
Please can i recover B112? How?
Thank's a alot
Andy

Hi
For other: Original B112 app file -> extract with universal extractor -> fastboot flash boot, recovery, system and userdata. Now i'm on B112 and everything seems o.k (about screen shows 3GB , B112, correct screen resolution)
Thank's
Andy

You forgot to install the universal cust.
But now you can factory reset from EMUI and then start the b211 update.zip as incremental update from EMUI.
My device: 701->703 B211 xposed 86

Rollback to EMUI 4.1 failed, Phone does not finish booting anymore

Hello,
I'm now at a point that my Honor FRD-L09C432 does not finish booting after trying to rollback to EMUI 4.1.
The hole story:
First, i was running EMUI 5 on my FRD-L09 which was rooted.
I'm having problems with my bluetooth connection, so I decided to rollback to EMUI 4.1 B131 (latest full package)
and to start with a clean unrooted system.
First of all, i prepared a sdcard with the rollback package from honor (dload folder on sdcard). Butting in this sdacrd
and shutdown the device. Now I have started the device with vol+/- pressed to force update via dload.
Update process startet and finished sucessfull.
Now, I have placed the B131 full package on the sdcard (dload folder) and also forced update via vol+/- method
The process startet, running up to 99% and reports "failure" than.
Rebooting phone now shows only the blue background with honor logo. It does not finish booting after this.
Tried to factory reset devices with huawei recovery -> successfull, but does not help
Tried to install twrp (3.0.2.0) and to format manual system, data, cache, cust -> works for every mount point, but not for "data". Resize or format "data" partition fails also
Going to fastboot and flash manual "boot.img", "cust.img", "recovery.img" and "system.img" from unpacked B131 updated was successfull but phone even does not finish booting.
Anyone knows something how to fix the phone to get it back working?
Thanks for your help.

I would try using the dload method for the rollback package (http://download-c.huawei.com/download/downloadCenter?downloadId=92131&version=360512&siteCode=uk-h) first before repeating it for the B131 package.

Ok, I'm back in business.
Here is what i have done:
1. Flash offical twrp 3.0.2.0 with fastboot
2. Boot into recovery
3. open shell -> adb shell
4. mkfs.ext2 /dev/block/platform/hi_mci.0/userdata
5. reboot to bootloader
6. flash recovery + recovery2
7. force update to B131 by vol+/- method
8. Reboot

If it helps thank me