No Command while entering recovery. - Moto Maxx Q&A, Help & Troubleshooting

Hii Guys,
I want to clear system cache.
But when i try to enter the recovery mode i get 'No Command' error. Please help me to solve this issue.

Mohitpunjabi said:
Hii Guys,
I want to clear system cache.
But when i try to enter the recovery mode i get 'No Command' error. Please help me to solve this issue.
Click to expand...
Click to collapse
How are you entering recovery? What steps? Do you have custom recovery TWRP installed or are you talking about stock recovery?

ChazzMatt said:
How are you entering recovery? What steps? Do you have custom recovery TWRP installed or are you talking about stock recovery?
Click to expand...
Click to collapse
Im talking about stock recovery...
Googled it and found the steps.
1. Volume down + Power key.
2. Then with volume key select Recovery mode.
3. It shows 'no command' with red exclamation Android logo.
Now comes the steps I was missing...
4. Press & hold the power key, then press the volume up button once holding the power key & then release the power button.
5. It boots to the stock recovery.
Are these steps correct or is there any other way ?

Mohitpunjabi said:
Hii Guys,
I want to clear system cache.
But when i try to enter the recovery mode i get 'No Command' error. Please help me to solve this issue.
Click to expand...
Click to collapse
- Enter recovery.
- When you see the "no command" with the android red exclamation, hold power button and press volume+
-Hold both for a second then release power.
- You should see the recovery menu now.

Related

Phone not getting in Recovery!

Hi,
I have my Nexus S rooted.
However I wanted to unroot it so I tried following steps for this, which include getting into recovery mode.
So I pressed power and Volume Up button and then selected RECOVERY and then again power button, but after it gets stuck at Google screen with unlock icon.
Please help!
nixhead said:
Hi,
I have my Nexus S rooted.
However I wanted to unroot it so I tried following steps for this, which include getting into recovery mode.
So I pressed power and Volume Up button and then selected RECOVERY and then again power button, but after it gets stuck at Google screen with unlock icon.
Please help!
Click to expand...
Click to collapse
looks like you intalled/restored the official recovery back
FIX!
enter in fastboot mode (vol + and power), download the official 4.0.4 images and follow the steps from this thread: http://forum.xda-developers.com/showthread.php?t=1572307
ATTENTION U MAY LOOSE YOUR DATA

[Q] Unable to load recovery - XT925

Hey guys. I can't seem to get into Recovery on my XT925 for the life of me.
From power off, I press Power + Vol Up to get the boot selection screen, select "recovery" from the list, and the phone reboots into the OS.
I've flashed both CWM and TWRP recoveries. Different versions of each too. But every time I hit "Recovery" it loads the OS and I can't flash any ROMS.
Another weird thing. When I'm in Fastboot and enter "fastboot reboot-bootloader" it just reboots into Fastboot again.
Can anyone help?
i dont know what the problem is but you could try downloading rom manager, it has an option to reboot into recovery, and see what happens.
bweN diorD said:
i dont know what the problem is but you could try downloading rom manager, it has an option to reboot into recovery, and see what happens.
Click to expand...
Click to collapse
I'm having the same problem. I unlocked my bootloader, rooted my 4.1.2 stock rom, installed ROM Manager, flashed the recovery, and when it goes into Recovery, I get an Android with it's belly open, and a red triangle with an exclamation mark inside it. It stays there 1 minute, and it boots. I've tried everything. Any help is appreciated.
Tks
pascaljr said:
I'm having the same problem. I unlocked my bootloader, rooted my 4.1.2 stock rom, installed ROM Manager, flashed the recovery, and when it goes into Recovery, I get an Android with it's belly open, and a red triangle with an exclamation mark inside it. It stays there 1 minute, and it boots. I've tried everything. Any help is appreciated.
Tks
Click to expand...
Click to collapse
That screen is your stock recovery. Hold vol+ and tap pwr at the same time and you'll boot into recovery. Also, after you install the recovery, you need to immediately boot into it so the update binary can complete. Otherwise, your stock recovery will over ride. Honestly, it's just easier to flash a recovery in fastboot. That's the option I've used every time.
RikRong said:
That screen is your stock recovery. Hold vol+ and tap pwr at the same time and you'll boot into recovery. Also, after you install the recovery, you need to immediately boot into it so the update binary can complete. Otherwise, your stock recovery will over ride. Honestly, it's just easier to flash a recovery in fastboot. That's the option I've used every time.
Click to expand...
Click to collapse
I flashed the recovery, booted into Recovery from ROM Manager, but I get the same screen, and no key combination is able to get me into recovery.
I'm actually trying to install CyanogenMod. I downloaded cm-10.1.3-xt925.zip and gapps-jb-20130812-signed.zip. To flash it through fastboot, every example uses an IMG file, not the zip file. To flash it through fastboot, should I unzip cm-10.1.3-xt925.zip and flash the boot.img inside it? Or just rename .zip from .img?
Tks
---------- Post added at 11:57 PM ---------- Previous post was at 11:07 PM ----------
RikRong said:
That screen is your stock recovery. Hold vol+ and tap pwr at the same time and you'll boot into recovery. Also, after you install the recovery, you need to immediately boot into it so the update binary can complete. Otherwise, your stock recovery will over ride. Honestly, it's just easier to flash a recovery in fastboot. That's the option I've used every time.
Click to expand...
Click to collapse
Flashing it from fastboot, and entering recovery immediately after did it! Thanks
pascaljr said:
I flashed the recovery, booted into Recovery from ROM Manager, but I get the same screen, and no key combination is able to get me into recovery.
I'm actually trying to install CyanogenMod. I downloaded cm-10.1.3-xt925.zip and gapps-jb-20130812-signed.zip. To flash it through fastboot, every example uses an IMG file, not the zip file. To flash it through fastboot, should I unzip cm-10.1.3-xt925.zip and flash the boot.img inside it? Or just rename .zip from .img?
Tks
---------- Post added at 11:57 PM ---------- Previous post was at 11:07 PM ----------
Flashing it from fastboot, and entering recovery immediately after did it! Thanks
Click to expand...
Click to collapse
Sweet! Good to see you got it to work. I'm not sure why, but ROM manager doesn't always seem to work.
I'm not able to enter in recovery mode using key combination pwr + vol key up and down (pressed simultaneously).
I'm only able to do this using CMW manager (Reboot into recovery). I've flash (using fastboot) recovery-clockwork-6.0.4.4-xt925.img, but it not accessible using key combination and relative menu (If the menu choose to boot into recovery mode, it start full boot and go into OS).
I've flashed CM10, but for access to recovery i've used CMW manager. I want to have the opportunity to enter directly into recovery in case of bad flash.
Where I'm wrong?
Thanks a lot
mitsus said:
I'm not able to enter in recovery mode using key combination pwr + vol key up and down (pressed simultaneously).
I'm only able to do this using CMW manager (Reboot into recovery). I've flash (using fastboot) recovery-clockwork-6.0.4.4-xt925.img, but it not accessible using key combination and relative menu (If the menu choose to boot into recovery mode, it start full boot and go into OS).
I've flashed CM10, but for access to recovery i've used CMW manager. I want to have the opportunity to enter directly into recovery in case of bad flash.
Where I'm wrong?
Click to expand...
Click to collapse
So you get the : normal pwr, rec, & etc list but when you scroll vol down & then vol up to select the recovery it boot normal?
I use : all keys hold till screen out. Then while keeping on both vol toggle pwr off , on & off. Boot menu list.
If that fails, post your sequence of events.
aviwdoowks said:
So you get the : normal pwr, rec, & etc list but when you scroll vol down & then vol up to select the recovery it boot normal?
I use : all keys hold till screen out. Then while keeping on both vol toggle pwr off , on & off. Boot menu list.
If that fails, post your sequence of events.
Click to expand...
Click to collapse
OK. So. This is the sequence:
1. Power key + Vol UP and DOWN pressed at the same time i'm able to show menu with "Recovery" option into list (others are AP Fastboot, Normal PWR, ecc)
2. Using Vol UP/DOWN key i go to Recovery option end press Power key
..phone start normally...not into recovery. I'm able to start recovery only using CWM manger or ADB.
My current recovery is ClockworkMod Recovery v6.0.4.4
Thanks
mitsus said:
OK. So. This is the sequence:
1. Power key + Vol UP and DOWN pressed at the same time i'm able to show menu with "Recovery" option into list (others are AP Fastboot, Normal PWR, ecc)
2. Using Vol UP/DOWN key i go to Recovery option end press Power key
..phone start normally...not into recovery. I'm able to start recovery only using CWM manger or ADB.
My current recovery is ClockworkMod Recovery v6.0.4.4
Thanks
Click to expand...
Click to collapse
You are not reading!
Final action vol up to select!
Tougher than stock recovery! I guess the bootloader engineers never used their own recovery.
aviwdoowks said:
You are not reading!
Final action vol up to select!
Tougher than stock recovery! I guess the bootloader engineers never used their own recovery.
Click to expand...
Click to collapse
Vol UP don't work! I've tried all key combination....including your suggestion but whenever start full OS
mitsus said:
Vol UP don't work! I've tried all key combination....including your suggestion but whenever start full OS
Click to expand...
Click to collapse
Hmmm
Well post all the recoverys you used, starting w/ the 1st.
Also where you got them.
Something has borked you.

[Q] Blu Advanced 4.0 Recovery

Does anyone know where I can find the stock recovery image for Blu Advanced 4.0. I tried to install CWM and it didnt take and now I dont have any recovery options. I want to reset my phone to factory But it is not working!!! If anyone can help please reply to this!!!! My phone is rooted and running Android 4.2.2
Thanks,
Eric
Hi, I am having the same problem, did you get the recovery back?
i am getting this phone, and i will try to dump the system image
emensch said:
Does anyone know where I can find the stock recovery image for Blu Advanced 4.0. I tried to install CWM and it didnt take and now I dont have any recovery options. I want to reset my phone to factory But it is not working!!! If anyone can help please reply to this!!!! My phone is rooted and running Android 4.2.2
Thanks,
Eric
Click to expand...
Click to collapse
BobbyAddams said:
Hi, I am having the same problem, did you get the recovery back?
Click to expand...
Click to collapse
Here are the system boot and recovery images
https://docs.google.com/file/d/0BwvFJ8wh88noVkE3SzFaU0I4NHM/edit?usp=docslist_api
Sent from my Venue 8 3830 using XDA Free mobile app
How can you get into recovery? I'm in a loop.
cma371 said:
How can you get into recovery? I'm in a loop.
Click to expand...
Click to collapse
1. Turn off the phone
2. press the volume up and down bottons at the same time
3. wait till you see the android logo
4. now your in recovery
Dead android
joanthanmajh said:
1. Turn off the phone
2. press the volume up and down bottons at the same time
3. wait till you see the android logo
4. now your in recovery
Click to expand...
Click to collapse
Dead android with the door open and a red triangle with exclamation mark.
Cant even wipe the cache partition.
Cant 'reboot system now'.
Had to do the battery pull.
Started fine.
joanthanmajh said:
1. Turn off the phone
2. press the volume up and down bottons at the same time
3. wait till you see the android logo
4. now your in recovery
Click to expand...
Click to collapse
Nope! To get into recovery mode (at least for the BLU Advance 4.0L A010U) you do the following:
1. Press (and keep holding) the Volume button in the middle so that both UP and DOWN are simultaneously pressed
2. Press (and keep holding) the Power button until you see on the screen two white lines saying:
Recovery Mode: Volume Up
Factory Mode: Volume Down
3. Press Volume UP once (do not hold). The intro logo "BLU Bold like us" will show up for a few seconds. Then you will see a black screen with a dead android, its belly open, a red exclamation mark and a line of white letters below saying:
No command
4. Press once the power button.
You are now in system recovery mode: Use Volume Up/Volume Down to select what you want to do and use the menu button on the lower-left to enter that command.
I need NVRAM file for my BLU Advance L A010. I now have invalid IMEI and I think it's because the phone was formatted but they never reflashed the entire ROM, just system, recovery, boot etc. So phone boots up fine but no nvram is present. If I could get nvram file for this phone, I can update the IMEI using MTK Engineering.
Can anyone help? Or does anyone know where I can get the complete stock ROM for this device. Most stock BLU ROMs posted online only provide the basic images needed to recover the device.

Not able to access Recovery mode in a89

I am not able to open recovery mode in micromax a89.
I pressed volume up+power button, but the adroid logo with some buttons on its body and a exlemetary sign on it is the only thing that is displayed. I am not getting any menu or options. What should i do?
vishwanathovi said:
I am not able to open recovery mode in micromax a89.
I pressed volume up+power button, but the adroid logo with some buttons on its body and a exlemetary sign on it is the only thing that is displayed. I am not getting any menu or options. What should i do?
Click to expand...
Click to collapse
Reflash the custom recovery and try again.PM me if it works.
quickboot
Just use quickboot app.. and click reboot into recovery mod....
Recovery Mode Trouble Fixed
vishwanathovi said:
I am not able to open recovery mode in micromax a89.
I pressed volume up+power button, but the adroid logo with some buttons on its body and a exlemetary sign on it is the only thing that is displayed. I am not getting any menu or options. What should i do?
Click to expand...
Click to collapse
If you are using the stock recovery, it will happen every time when u want to boot your phone into recovery mode. for that you just need to press the home key for options, and to select option press the menu key.
<<< IF YOU ARE SATISFIED WITH MY ANSWER & IF I HELPED YOU, PLEASE PRESS THE :good:THANKS:good: BUTTON >>> :good:
PLZ LiKe MY Page On Facebook http://www.facebook.com/fXDAdev
Press home key
vishwanathovi said:
I am not able to open recovery mode in micromax a89.
I pressed volume up+power button, but the adroid logo with some buttons on its body and a exlemetary sign on it is the only thing that is displayed. I am not getting any menu or options. What should i do?
Click to expand...
Click to collapse
just press the home key when you get the android symbol with exclemation sign... It seems you are using stock recovery because CWM or TWRP recoveries does not show these type of symbols..
Use MobileUncle Tools. You can directly boot to recovery from that app.
vishwanathovi said:
I am not able to open recovery mode in micromax a89.
I pressed volume up+power button, but the adroid logo with some buttons on its body and a exlemetary sign on it is the only thing that is displayed. I am not getting any menu or options. What should i do?
Click to expand...
Click to collapse
bro just press home button and see the magic
vishwanathovi said:
I am not able to open recovery mode in micromax a89.
I pressed volume up+power button, but the adroid logo with some buttons on its body and a exlemetary sign on it is the only thing that is displayed. I am not getting any menu or options. What should i do?
Click to expand...
Click to collapse
Hi There.
Well this is not a problem actually you are on the Stock Recovery that doesnt give you the features like Wipe Data/Dalvik/Cache
Try Flashing a Custom Recovery.
Any Help Needed Ask Me...
IF Helped click THANKS

[Q] Reboot loop after 4.4.2 update to 4.4.4

Okay so I have just updated my phone yesterday as I got a notification saying there was an update to 4.4.4 so I downloaded it and installed it and now the phone is stuck in a boot loop, is there any possible way that you can make simple for me as I am new to rooting and flashing phones, this was my first ever time.
Thanks for any help or advice in advance.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Okay so after doing a couple days research and listening to you guys, I found out when I rooted I didn't flash a recovery... So yeah I installed CWM recovery and then wiped cashe partision and it worked. When I wiped it, it came up saying to "fix root" as I may have lost in then I clicked yes then booted straight away. That's it fixed now.
Thank you for your help everyone!
Gyrotize said:
Okay so I have just updated my phone yesterday as I got a notification saying there was an update to 4.4.4 so I downloaded it and installed it and now the phone is stuck in a boot loop, is there any possible way that you can make simple for me as I am new to rooting and flashing phones, this was my first ever time.
Thanks for any help or advice in advance.
Click to expand...
Click to collapse
Go to recovery and wipe data and wipe cache hope it works,
Good luck
Jeetu said:
Go to recovery and wipe data and wipe cache hope it works,
Good luck
Click to expand...
Click to collapse
I can't even get in recovery mode...
Gyrotize said:
I can't even get in recovery mode...
Click to expand...
Click to collapse
When the phone is rebooting, press and hold power down, you'll then get into Fastboot. From there, go to Recovery using the volume down key and when selected, press the volume up to select. If it tries to install the update again, don't let it reboot into the ROM - when the recovery restarts itself, make sure you hold volume down again.
Jeetu said:
Go to recovery and wipe data and wipe cache hope it works,
Good luck
Click to expand...
Click to collapse
zedlor said:
When the phone is rebooting, press and hold power down, you'll then get into Fastboot. From there, go to Recovery using the volume down key and when selected, press the volume up to select. If it tries to install the update again, don't let it reboot into the ROM - when the recovery restarts itself, make sure you hold volume down again.
Click to expand...
Click to collapse
It doesn't work it just keeps rebooting and coming up with the "bootloader unlocked" screen after itself
1. With the phone powered off, press the VOL UP + VOL DOWN KEY together + POWER KEY .
2. The device will display different BOOT OPTIONS
3. Use the VOL DOWN Key to SCROLL to Recovery and VOL UP Key to SELECT
Tip: If the device reboots, you may have waited to long to make a selection, you will need to begin the process again.
4. The device will display the Motorola logo and then the Android in distress ( logo with Exclamation mark)
5. Press and hold the VOL DOWN key, then tap and release the VOL UP key.
Tip: You can try this step, holding the phone in landscape. If you are stuck on step 5, try a force reboot by pressing the power Key and Vol Down key, and start the process again.
6. The device will display additional menu options (Text will appear in BLUE)
7. Use the VOL DOWN Key to scroll to wipe cache partition and the POWER Key to SELECT this option.
8. The device will then perform the partition wipe
9. Once the Formatting is complete, press the POWER key to confirm a REBOOT
11. The device will reboot and start the normal power up sequence .
worked for me.....
buggerlugz said:
1. With the phone powered off, press the VOL UP + VOL DOWN KEY together + POWER KEY .
2. The device will display different BOOT OPTIONS
3. Use the VOL DOWN Key to SCROLL to Recovery and VOL UP Key to SELECT
Tip: If the device reboots, you may have waited to long to make a selection, you will need to begin the process again.
4. The device will display the Motorola logo and then the Android in distress ( logo with Exclamation mark)
5. Press and hold the VOL DOWN key, then tap and release the VOL UP key.
Tip: You can try this step, holding the phone in landscape. If you are stuck on step 5, try a force reboot by pressing the power Key and Vol Down key, and start the process again.
6. The device will display additional menu options (Text will appear in BLUE)
7. Use the VOL DOWN Key to scroll to wipe cache partition and the POWER Key to SELECT this option.
8. The device will then perform the partition wipe
9. Once the Formatting is complete, press the POWER key to confirm a REBOOT
11. The device will reboot and start the normal power up sequence .
worked for me.....
Click to expand...
Click to collapse
This is the better first post ever :good:
denzel09 said:
This is the better first post ever :good:
Click to expand...
Click to collapse
Still none the wiser how to update to 4.4.4 though! I mean surely with a rooted phone there is an app to do it these days???
u can try this
if you have unlock bootloader and can go to fastboot mode,.try to flash your moto g using your 4.4.2 stock rom by manually (you can search how to do it),.flash partition gpt and motoboot (ignore the error),reboot bootloader and finished the rest command..flash phil touch recovery and reboot ro recovery,go to install zip,choose install zip from sideload then send your phone update using sideload command.
that"s solved my problems when i'm getting stuck on blank screen after unlock bootloader warning or only booting to recovery,i'm on 4.4.2 when get that error.
but now in my case,i should go to fastboot mode and choose normal powerup to make my phone booting normally,.because if i'm power on using power button,moto g booting to recovery,not a big deal for me as long as my phone back to the track hehehe
my moto g is o2 germany,but i'm flashing with 4.4.2 germany retail and 4.4.4 update for germany retail.
buggerlugz said:
1. With the phone powered off, press the VOL UP + VOL DOWN KEY together + POWER KEY .
2. The device will display different BOOT OPTIONS
3. Use the VOL DOWN Key to SCROLL to Recovery and VOL UP Key to SELECT
Tip: If the device reboots, you may have waited to long to make a selection, you will need to begin the process again.
4. The device will display the Motorola logo and then the Android in distress ( logo with Exclamation mark)
5. Press and hold the VOL DOWN key, then tap and release the VOL UP key.
Tip: You can try this step, holding the phone in landscape. If you are stuck on step 5, try a force reboot by pressing the power Key and Vol Down key, and start the process again.
6. The device will display additional menu options (Text will appear in BLUE)
7. Use the VOL DOWN Key to scroll to wipe cache partition and the POWER Key to SELECT this option.
8. The device will then perform the partition wipe
9. Once the Formatting is complete, press the POWER key to confirm a REBOOT
11. The device will reboot and start the normal power up sequence .
worked for me.....
Click to expand...
Click to collapse
Okay so I get to step 3 and it reboots. It shows the "bootlocker unlocked" then it shows it again then goes onto the normal Moto G boot screen with the logo and is still bootlocked.. HALP
Okay so I have been researching for a little while now and I found this video on youtube, could you please tell me if this will work?
/watch?v=laU6NQ0LxR0
Thanks you.
Gyrotize said:
Okay so I get to step 3 and it reboots. It shows the "bootlocker unlocked" then it shows it again then goes onto the normal Moto G boot screen with the logo and is still bootlocked.. HALP
Click to expand...
Click to collapse
that's mean you can't access your stock recovery...try to flash your stock rom moto g 4.4.2 then install philz,use sideload to install the update file.
Gyrotize said:
Okay so I get to step 3 and it reboots. It shows the "bootlocker unlocked" then it shows it again then goes onto the normal Moto G boot screen with the logo and is still bootlocked.. HALP
Click to expand...
Click to collapse
It looks as if it will boot into recovery, then the screen goes black then goes into the normal boot screen then boots....

Categories

Resources