Database Info

can't get into recovery

Hi i just flashed my transformer to this rom
http://forum.xda-developers.com/showthread.php?t=1514658
and now i can't go into recovery help please

Vol down plus power button and when you see words at top left corner you must push Vol up within 5 second.
Alternative is use the "Transformer boot into recovery" app from market.
Btw what is it doing when you try to get into recovery?

Are you trying to get into recovery by an app, or using the buttons as baseballfanz described?
If you cannot get into recovery using the buttons you may have to reinstall the "RecoveryInstaller.apk" for CWM to get it working again.

I can boot into Clockwork Recovery using the app but actually what is the exact button combinations to boot in to Clockwork Recovery?
Thanks.

bluebrew said:
I can boot into Clockwork Recovery using the app but actually what is the exact button combinations to boot in to Clockwork Recovery?
Thanks.
Click to expand...
Click to collapse
Turn off. Hold VOL DOWN and POWER for about 10-12 seconds until small text appears. Tap the VOL UP within 5 seconds of when it says to press VOL UP to enter RCK.

Please help recovery mode problem

Hey guys I have a recovery problem. I rooted my O1 and then tried to install cwm using app from market but when I try to enter recovery it starts fastboot Hopefully normal mode works and the phone boots into rom. So I tried reviving it using this thread http://forum.xda-developers.com/showthread.php?t=1088046 but still have the same problem. So what do I have to do ????
I have another question: I found in settings of rom manager erase recovery prior to flashing an.I didn't tick it so do I have to tick it???
Sent from my LG-P500 using xda app-developers app

If your phone isn't stuck in fastboot now can't u just enter recovery by holding power +home +vol down (while switched off) ??? Or is ur problem entring it through Rom manager?
Sent from my LG-P500 using Tapatalk 2

sachin kamboj said:
If your phone isn't stuck in fastboot now can't u just enter recovery by holding power +home +vol down (while switched off) ??? Or is ur problem entring it through Rom manager?
Sent from my LG-P500 using Tapatalk 2
Click to expand...
Click to collapse
I can't enter recovery anyway it just stucks in fastboot
Can I just flash again usin rom manager or rom toolbox????

borchaniz said:
I can't enter recovery anyway it just stucks in fastboot
Can I just flash again usin rom manager or rom toolbox????
Click to expand...
Click to collapse
You dont need to tick Erase Recovery.
Press HOME + VOLUME then power.. keep holding them til you see recovery!!
If it doesnt work.. flash recovery again using Rom Manager.
Also try to get into recovery through rom manager if nothing works!!

I'm having the same issue. Just flashed CWM with Rom Manager today. It worked a few times, but now it's not. I cannot select any option on the list. The back and search buttons blank out the screen except for the rom manager logo (also the background) and if I hit them again, the "cursor" has moved up or down, depending. If I press the power button, it also blanks out the screen except for the logo, but when I press it again, the cursor goes back to the top. The only button that doesn't make it blank out is volume down. Home and Menu buttons do nothing.
Also, doesn't matter if I load recovery manually or through RM.
UPDATE: Managed to get it stuck on the RM Logo. Nothing does anything.
UPDATE: Flashed VM670 Recovery with FlashImageGUI and am getting similar results. Now both volume keys allow for selecting, home and menu allow for selecting with the cleared screen, and power, back, and search do nothing but move the cursor to the top. If I hold the power button, though, the screen flashes and the cursor doesn't move.

I had same problem on my vm670 try using camera button to select . Worked for me
Sent from my LG-P505 using xda premium

Forgot aout those buttons... Voice dial button moves cursor down (VDown moves it up) but camera button does nothing.

a.child said:
Forgot aout those buttons... Voice dial button moves cursor down (VDown moves it up) but camera button does nothing.
Click to expand...
Click to collapse
Don't forget that the camera button is a 2-step button. You have to press it all the way in for it to register in CWM. Also, I'm running CWM 3.2.0.1 and the Volume buttons work for me just fine.
And for the one who couldn't get into recovery, have you tried booting normally, connecting it to your computer, and running this at a command prompt?
adb reboot recovery​

[Q] how to boot into recovery mode using hard button?

i have tried almost 10 times to boot into recovery mode using hard button...and failed....someone please help me....i just try bcoz its just my plan if my xperia c bootloop...sorry for my bad english....

Enter in Recovery Mode (Stock or Custom)
al Fateh said:
i have tried almost 10 times to boot into recovery mode using hard button...and failed....someone please help me....i just try bcoz its just my plan if my xperia c bootloop...sorry for my bad english....
Click to expand...
Click to collapse
Just turn off and try to boot into recovery mode with combinations of volume +/ volume - / power button. After, wait sony logo apears and click again in these three button combinations. If you have rooted your phone, try to install a custom recovery from here http://forum.xda-developers.com/showthread.php?t=2696987.
:good::good::good:

sid_reis said:
Just turn off and try to boot into recovery mode with combinations of volume +/ volume - / power button. After, wait sony logo apears and click again in these three button combinations. If you have rooted your phone, try to install a custom recovery from here http://forum.xda-developers.com/showthread.php?t=2696987.
:good::good::good:
Click to expand...
Click to collapse
The key combination is " Volume - " and "Power" pressed together. but before that you need to flash a custom recovery.
As soon as you press this combination, SONY logo will appear and device will vibrate, leave the keys at this point.

[Q] How to enter CWM mode.

Can any one tell me how to enter to CWM recovery mode in Micromax Doodle 3. I have tried with Volume Up + Power. It din work. Tried with Volume Up + Volume Down + power KEY. It din work. There.
Im trying to install font from CWM recovery mode. I have rooted my using farmroot.
Please if anyone know how to enter CWM recovery mode in Micromax Doodle 3. let me know.:good::good:

Ironmaiden2580 said:
Can any one tell me how to enter to CWM recovery mode in Micromax Doodle 3. I have tried with Volume Up + Power. It din work. Tried with Volume Up + Volume Down + power KEY. It din work. There.
Im trying to install font from CWM recovery mode. I have rooted my using farmroot.
Please if anyone know how to enter CWM recovery mode in Micromax Doodle 3. let me know.:good::good:
Click to expand...
Click to collapse
volume up + volume down + power button.. try holding fa 10secs or until you see booting to recovery appears at the top of screen in tiny font
BE SURE TO HIT THAT THANKS BUTTON IF I HELPED

If you are rooted and installed Super User you can go to Play store and download Quick Boot then hit "Recovery", it will allow you boot to recovery without holding buttons.

Thanks Bro, As I have already rooted my phone, can I just copy the font in SD card and install the font from SD from CWM mode?????

harson0203 said:
If you are rooted and installed Super User you can go to Play store and download Quick Boot then hit "Recovery", it will allow you boot to recovery without holding buttons.
Click to expand...
Click to collapse
I have tried using the app Quick Boot, tried recovery and I enters the android system recovery. However, Im not able to apply update from SD. Error message "Installation Arborted"
Can any one help me how to install fonts in my Doodle 3 MicroMAx""

No Command while entering recovery.

Hii Guys,
I want to clear system cache.
But when i try to enter the recovery mode i get 'No Command' error. Please help me to solve this issue.

Mohitpunjabi said:
Hii Guys,
I want to clear system cache.
But when i try to enter the recovery mode i get 'No Command' error. Please help me to solve this issue.
Click to expand...
Click to collapse
How are you entering recovery? What steps? Do you have custom recovery TWRP installed or are you talking about stock recovery?

ChazzMatt said:
How are you entering recovery? What steps? Do you have custom recovery TWRP installed or are you talking about stock recovery?
Click to expand...
Click to collapse
Im talking about stock recovery...
Googled it and found the steps.
1. Volume down + Power key.
2. Then with volume key select Recovery mode.
3. It shows 'no command' with red exclamation Android logo.
Now comes the steps I was missing...
4. Press & hold the power key, then press the volume up button once holding the power key & then release the power button.
5. It boots to the stock recovery.
Are these steps correct or is there any other way ?

Mohitpunjabi said:
Hii Guys,
I want to clear system cache.
But when i try to enter the recovery mode i get 'No Command' error. Please help me to solve this issue.
Click to expand...
Click to collapse
- Enter recovery.
- When you see the "no command" with the android red exclamation, hold power button and press volume+
-Hold both for a second then release power.
- You should see the recovery menu now.