Related
Hello, I have a Motorola Defy which i have rooted and installed clockworkmod on it. I tried to install Cyanogen mod 7.1 from the website. The phone got to the boot screen where it continued to cycle through it thing and nothing more. I restarted the phone and now it gets stuck at the first screen where its says "google". I tried to enter recovery again (power + volume down) and clockworkmod is completely gone. I want to go back to the stock OS so it atleast works again. Ive tried using the update.zip option in the stock recovery mode but I keep getting an error "failed to verify whole-file signature" when using a signed copy of cyanogen mod. I also tried putting my backup in a zip with the same error. Ive even tried formatting my sd card. What do i do?
I was more or less where you are around June or so. I'm no expert by any means, but perhaps I can help. If memory serves I used a program called RSD Lite to flash it back to the stock unlocked rom I got from the "bl7 finally rooted" thread - if you unlocked a different way, I'd try to find your original rom.
Once you get to where you understand how to get back to stock it makes the whole thing a lot less scary, or it did for me. Once you get back up and running, try flashing Whiterabbit. I didn't have luck getting anything else to run, but that one worked the first time I tried it, and I'm very happy I persevered. Miles better than the stock OS.
Marvelicious75 said:
I was more or less where you are around June or so. I'm no expert by any means, but perhaps I can help. If memory serves I used a program called RSD Lite to flash it back to the stock unlocked rom I got from the "bl7 finally rooted" thread - if you unlocked a dirrerent way, I'd try to find your original rom.
Once you get to where you understand how to get back to stock it makes the whole thing a lot less scary, or it did for me. Once you get back up and running, try flashing Whiterabbit. I didn't have luck getting anything else to run, but that one worked the first time I tried it, and I'm very happy I persevered. Miles better than the stock OS.
Click to expand...
Click to collapse
I cant use the program as my phone doesnt get detected when connected to my pc.
OK, lets start with the basics, if I can remember it right... Have you used RSD Lite successfully before this? Drivers installed? Using bootloader mode? If any of this is unfamiliar go hit the beginner's thread - if you have done all this you may be beyond my help and in need of someone a bit more experienced.
Marvelicious75 said:
OK, lets start with the basics, if I can remember it right... Have you used RSD Lite successfully before this? Drivers installed? Using bootloader mode? If any of this is unfamiliar go hit the beginner's thread - if you have done all this you may be beyond my help and in need of someone a bit more experienced.
Click to expand...
Click to collapse
I fixed it, there were a different set of buttons to hold to get into boot loader. The default recovery was not over written as i thought (happened to all my other phones). Thank you very much for you help. It has been very much appreciated.
Glad to hear it.
Anyone know of, or or have a link to a factory rom (hell any rom would do at this point) that I would be able to flash with the stock S3 recovery? Just trying to unbrick my phone. Story of what happened below:
I'm running stock 4.1.1 rooted touchwiz. I wake up this morning to a notification saying I had an update on my phone. Should have definitely waited but without thinking I went ahead and updated, which of course soft bricks? The phone. (boots up, and but hangs at the 4Glte, flash screen)normally this would be an easy fix, I could Odin back to stock or something but I'm down in Mississippi till Monday for training and do not have access to my pc.
I can access the factory recovery on the phone but that's it, have no clue where CWM is. I've tried flashing some backups but the factory recovery says that it's not a signed package or whatever. Anyone have any idea how I can get this sucker booted up and running using just an android tablet?
What about reflashing CWM so I can access my backups? Could I somehow flash CWM with factory recovery?:
Dr. Light said:
Anyone know of, or or have a link to a factory rom (hell any rom would do at this point) that I would be able to flash with the stock S3 recovery? Just trying to unbrick my phone. Story of what happened below:
I'm running stock 4.1.1 rooted touchwiz. I wake up this morning to a notification saying I had an update on my phone. Should have definitely waited but without thinking I went ahead and updated, which of course soft bricks? The phone. (boots up, and but hangs at the 4Glte, flash screen)normally this would be an easy fix, I could Odin back to stock or something but I'm down in Mississippi till Monday for training and do not have access to my pc.
I can access the factory recovery on the phone but that's it, have no clue where CWM is. I've tried flashing some backups but the factory recovery says that it's not a signed package or whatever. Anyone have any idea how I can get this sucker booted up and running using just an android tablet?
What about reflashing CWM so I can access my backups? Could I somehow flash CWM with factory recovery?:
Click to expand...
Click to collapse
first of all you can't flash anything on a stock recovery hence the need of a custom recovery. Second you don't accept the OTA when rooted as it can cause the exact issue that you have. Last there isn't a way to fix your problem via another android device that I know of.
U are going to need a pc and then u will need to download Odin http://forum.xda-developers.com/attachment.php?attachmentid=1165122&d=1340993443 and u can get the official software from here on XDA http://hotfile.com/dl/182822657/9f6...WBLK3_381038_REV09_user_low_ship.tar.md5.html this is the 4.1.1 software. Here is a link to some official pre rooted software http://forum.xda-developers.com/showthread.php?t=1984436 all of these software's you can install though Odin just look up here on XDA on how to use Odin and you will be fine once your phone is up and running again then you will need to get you a custom recovery. Then you can access your backups.
Always_Jonezen said:
U will need to download Odin http://forum.xda-developers.com/attachment.php?attachmentid=1165122&d=1340993443 and u can get the official software from here on XDA http://hotfile.com/dl/182822657/9f6...WBLK3_381038_REV09_user_low_ship.tar.md5.html this is the 4.1.1 software. Here is a link to some official pre rooted software http://forum.xda-developers.com/showthread.php?t=1984436 all of these software's you can install though Odin just look up here on XDA on how to use Odin and you will be fine once your phone is up and running again then you will need to get you a custom recovery.
Click to expand...
Click to collapse
He doesn't have access to his PC PLUS he already knows what to do on that end.
jmxc23 said:
He doesn't have access to his PC PLUS he already knows what to do on that end.
Click to expand...
Click to collapse
Just trying to help out but of course someone always has to criticize. I don't see you giving him any advice.
Thanks for all of advice guys. I'll prob just wait it out till Monday. Thanks again.
Always_Jonezen said:
Just trying to help out but of course someone always has to criticize. I don't see you giving him any advice.
Click to expand...
Click to collapse
He was asking if he can use an android tablet to fix his phone. He doesn't have access to PC at least until Monday it says so in his post. I wasn't even criticizing you at all. Unless he knows someone with a PC in Mississippi or someone here knows how to use one android device to flash something on another android device he sadly will have to wait until he gets home to fix his phone. You didn't do anything to be criticized for trying to help all I did was point out the info that you missed without personally attacking you making it a critique.
jmxc23 said:
He was asking if he can use an android tablet to fix his phone. He doesn't have access to PC at least until Monday it says so in his post. I wasn't even criticizing you at all. Unless he knows someone with a PC in Mississippi or someone here knows how to use one android device to flash something on another android device he sadly will have to wait until he gets home to fix his phone. You didn't do anything to be criticized for trying to help all I did was point out the info that you missed without personally attacking you making it a critique.
Click to expand...
Click to collapse
hey all, I've been reading , downloading etc for hours trying to get back into my GS3.. i was as usual roaming around and saw a post that said something to this effect "do ya need to get back to stock?" and figured yes i need to so i jumped in with both feet ..i had my boot loader unlocked and for some reason locked the darned thing remembering it was locked before i rooted and then i get the screen that says ie: "System software not authorized ~~~~~~~~~~~~" with a yellow triangle over it with an "!" mark in it..
all would have been ok except the line up of the way to do things was kinda outta line.. after i had locked bootloader "which is the way the GS3 came" i thought. at any rate i am now where i said i was and if i can be helped it would be appreciated.. and no repeated.. next time i'll read their whole line up first.. so help me if ya can and i am game right now for about anything ..
I am relatively new at ROMs and I installed CyanogenMod 10 on my AT&T HTC One X (US) a couple of months ago. Recently, I tried upgrading to the M2 release of CM10.1 using the evita package which I understand is the US version of the ROM. I followed the same instructions I used to install 10.0 for 10.1. However, the installation froze and did nothing for a few minutes and gave me the message "no MD5 file found". I shut the phone down and restarted, but the phone would no longer start. I did a "system wipe" to get ride of the OS so I could re-install it, but now, my computer won't recognize my phone when I connect them and I can't move the CM10.1 zip file from my desktop to my phone. I have nothing already on the phone I can flash besides Team Win Recovery Project which is what I use for Recovery. I have no recovery files.
Did I just paperweight my phone, or is there a way to salvage this situation.
sliceroo said:
I am relatively new at ROMs and I installed CyanogenMod 10 on my AT&T HTC One X (US) a couple of months ago. Recently, I tried upgrading to the M2 release of CM10.1 using the evita package which I understand is the US version of the ROM. I followed the same instructions I used to install 10.0 for 10.1. However, the installation froze and did nothing for a few minutes and gave me the message "no MD5 file found". I shut the phone down and restarted, but the phone would no longer start. I did a "system wipe" to get ride of the OS so I could re-install it, but now, my computer won't recognize my phone when I connect them and I can't move the CM10.1 zip file from my desktop to my phone. I have nothing already on the phone I can flash besides Team Win Recovery Project which is what I use for Recovery. I have no recovery files.
Did I just paperweight my phone, or is there a way to salvage this situation.
Click to expand...
Click to collapse
Are you able to get into recovery?
joelrwise said:
Are you able to get into recovery?
Click to expand...
Click to collapse
Yes. I can get into recovery and the screen that tells you the root status of the phone.
sliceroo said:
Yes. I can get into recovery and the screen that tells you the root status of the phone.
Click to expand...
Click to collapse
If you can get into recovery then you aren't bricked just yet! If you have an sd card reader on your computer or know somebody who does thats one way you could get a new rom on your phone to flash. Most recoveries have a way to let you connect your phone to your computer for file transfer while in recovery. I believe in TWRP the option is in the Mount are. I could be wrong though. You just need to figure out how to get a new Rom on your phone. If none of the above work, one trick that has always worked for me, would be to put your sd card into someone elses phone, and download a known working rom onto your sd card via theyre phone, and just put it back into your phone. Hope i helped. Let me know how it goes man. I've been here before haha
joelrwise said:
If you can get into recovery then you aren't bricked just yet! If you have an sd card reader on your computer or know somebody who does thats one way you could get a new rom on your phone to flash. Most recoveries have a way to let you connect your phone to your computer for file transfer while in recovery. I believe in TWRP the option is in the Mount are. I could be wrong though. You just need to figure out how to get a new Rom on your phone. If none of the above work, one trick that has always worked for me, would be to put your sd card into someone elses phone, and download a known working rom onto your sd card via theyre phone, and just put it back into your phone. Hope i helped. Let me know how it goes man. I've been here before haha
Click to expand...
Click to collapse
I went into TWRP Mount and it allowed me to mount the phone. I went ahead and did that, but Windows told me that I had to format the disk. I agreed and Windows formatted it. Afterwards, I successfully copied over the CM10.1 Evita M2 zip file and the lates Gapps zip file. I then went to TWRP's install section and flashed both zips. TWRP told me both happened succesfully. However, while flashing over the CM10.1 file, it told me that no MD5 file was found and that it was just going to skip that. Then, it formatted some mke5 partition and then went ahead and finished. I wiped the Dalvik cache and the system Cache and restarted the phone. It is currently stuck at the "HTC Quietly Beautiful" intro screen and won't boot past that. Is there something I missed?
If that 10.1 already failed because of an MD5 problem, I wouldn't have tried to flash it again - the file probably has some problems in itself and either needs to be re-downloaded or just won't work.
Just flash the stock firmware or something - and use an MD5 checking program.
Pennycake said:
If that 10.1 already failed because of an MD5 problem, I wouldn't have tried to flash it again - the file probably has some problems in itself and either needs to be re-downloaded or just won't work.
Just flash the stock firmware or something - and use an MD5 checking program.
Click to expand...
Click to collapse
The thing is TWRP returned the status as successful despite missing the MD5 file. I'll try flashing over another package and if that doesn't work, I'll try flashing over CM10. If that still doesn't work, I'll just do stock firmware if I can find it somewhere, I guess.
In the future, making a backup is really awesome. Not saying that like "I told ya so" - but I've used them so many times myself, it's really great to say, "oops, I overlooked something" and then be able to just go back to a perfect snapshot of how things were before.
Also, how long did you let the phone sit at the boot screen ? It can hang for quite a while on the first boot.
Pennycake said:
In the future, making a backup is really awesome. Not saying that like "I told ya so" - but I've used them so many times myself, it's really great to say, "oops, I overlooked something" and then be able to just go back to a perfect snapshot of how things were before.
Also, how long did you let the phone sit at the boot screen ? It can hang for quite a while on the first boot.
Click to expand...
Click to collapse
Yeah I would just reflash a ROM that you've used before and that you know works. Chances are if the cm10.1 didn't work the first time its probably not going to the second time. And he has a point. First boot always takes forever. I've flashed a couple ROMs and thought I was bootlooped but I let it sit for a good 5-10 minutes and the setup screen finally came up.
joelrwise said:
Yeah I would just reflash a ROM that you've used before and that you know works. Chances are if the cm10.1 didn't work the first time its probably not going to the second time. And he has a point. First boot always takes forever. I've flashed a couple ROMs and thought I was bootlooped but I let it sit for a good 5-10 minutes and the setup screen finally came up.
Click to expand...
Click to collapse
I had no idea that it could take that long. I guess I'll just turn my phone on and see if it wants to start. I'll leave it going for a good five to ten minutes this time. Shutting the phone down while its still in the intro screen doesn't damage the OS, does it? Thanks for the advice so far guys, I really appreciate it.
I recently got my Samsung Galaxy S6 and decided to root and install TWRP for a custom rom. I was able to root the phone and then installed their android app. TWRP Manager (ROOT).
After that I went to the app and one of the sidebars labeled install TRWP on the app then to the codename zeroflte for the Samsung Galaxy S6. It told me to restart my phone and I did but after that I was not able to use my phone again. Whenever I would turn on my phone it would show the normal Samsung s6 screen with a unlock picture and the words custom underneath. After that it would display a turquoise color screen with a words
Start Up Failed. Your device didn’t start up successfully. Use the Verizon Software Repair Assistant on a computer to repair your device.
I tried to google and see if anyone had a similar problem but nothing popped up. I don’t know where to find a copy for the Verizon Software Repair Assistant for the Galaxy S6.
I also tried and factory reset the phone or anything but the only combinations of buttons that would work on my phone were the down volume + power button. It gave me a list of options including factory reset but every option that I chose would lead me back to the same screen. The turquoise screen saying Start Up Failed.
Any help would be great. I don’t know what to do now. Tomorrow I am going to down to a local repair store and see what they can do. But if you know of anything that would be great. Thank you for your time and have a nice day.
inolil said:
I recently got my Samsung Galaxy S6 and decided to root and install TWRP for a custom rom. I was able to root the phone and then installed their android app. TWRP Manager (ROOT).
After that I went to the app and one of the sidebars labeled install TRWP on the app then to the codename zeroflte for the Samsung Galaxy S6. It told me to restart my phone and I did but after that I was not able to use my phone again. Whenever I would turn on my phone it would show the normal Samsung s6 screen with a unlock picture and the words custom underneath. After that it would display a turquoise color screen with a words
Start Up Failed. Your device didn’t start up successfully. Use the Verizon Software Repair Assistant on a computer to repair your device.
I tried to google and see if anyone had a similar problem but nothing popped up. I don’t know where to find a copy for the Verizon Software Repair Assistant for the Galaxy S6.
I also tried and factory reset the phone or anything but the only combinations of buttons that would work on my phone were the down volume + power button. It gave me a list of options including factory reset but every option that I chose would lead me back to the same screen. The turquoise screen saying Start Up Failed.
Any help would be great. I don’t know what to do now. Tomorrow I am going to down to a local repair store and see what they can do. But if you know of anything that would be great. Thank you for your time and have a nice day.
Click to expand...
Click to collapse
Have you tried to Odin back to stock?
http://forum.xda-developers.com/verizon-galaxy-s6/development/5-15-stock-odin-tar-t3109676
Ya, you'll need to odin back to stock like he said. And TWRP isn't available for our phone since we don't have an unlocked bootloader. Do not try and install TWRP again. You'll want to use Flashfire if you need to flash anything.
brholt6 said:
Ya, you'll need to odin back to stock like he said. And TWRP isn't available for our phone since we don't have an unlocked bootloader. Do not try and install TWRP again. You'll want to use Flashfire if you need to flash anything.
Click to expand...
Click to collapse
Awesome thank you
I need help!
I did the exact same thing with my Galaxy s6, i tried to do the same thing with my newly acquired root, I am very new but very interested in rooting and customizing my phone, when I plug my phone into a computer it only pops up with the start up failed screen, I installed the odin thing but i have no clue where to go from here and any assistance would be greatly appreciated. thank you
Bubblegum Mage said:
I did the exact same thing with my Galaxy s6, i tried to do the same thing with my newly acquired root, I am very new but very interested in rooting and customizing my phone, when I plug my phone into a computer it only pops up with the start up failed screen, I installed the odin thing but i have no clue where to go from here and any assistance would be greatly appreciated. thank you
Click to expand...
Click to collapse
Keep in mind XDA is a community for developers by developers. People are also willing to help, but you got to put forth your own effort. You will get ignored if you think people on this site are going to act as free tech support. Your question is posted just a few posts down from a link to the process on using odin to return to stock. You need to just follow those instructions. If you don't understand a step then Google it. I'm saying this because I noticed you joined XDA to ask this question. Or at least it's your first post. You will make a lot of enemies here if you don't take the time to read and research things before posting.
HELP
I have the same problem (Start up failed) but ODIN is not working for me... I am using the stock firmware for the GS6 edge and it says failed... what should I do?
Bee Funny said:
I have the same problem (Start up failed) but ODIN is not working for me... I am using the stock firmware for the GS6 edge and it says failed... what should I do?
Click to expand...
Click to collapse
If you have an edge you should use their forum. It's different than the GS6.
Just had to Odin my Verizon S6 (sm-g920v) to get it back to factory defaults.
I've been rooted for months with no issues and have known my bootloader was locked with no nice way around it but then i read some stupid guides saying to go get twrp manager to load custom roms on the Galaxy s6 phones and they even included the sm-g920v model number. I went to the app store, downloaded twrp manager, followed the first few steps, rebooted and that was that. Could not boot up anymore without Start Up Failed. A few checks and warning would have been greatly appreciated from the app developers but oh well.
Well that was fun. Now to redo everything on my phone.
Oooah said:
Just had to Odin my Verizon S6 (sm-g920v) to get it back to factory defaults.
I've been rooted for months with no issues and have known my bootloader was locked with no nice way around it but then i read some stupid guides saying to go get twrp manager to load custom roms on the Galaxy s6 phones and they even included the sm-g920v model number. I went to the app store, downloaded twrp manager, followed the first few steps, rebooted and that was that. Could not boot up anymore without Start Up Failed. A few checks and warning would have been greatly appreciated from the app developers but oh well.
Well that was fun. Now to redo everything on my phone.
Click to expand...
Click to collapse
Same exact crap just happened to me. I was running CleanRom Lite....thought I could use TWRP...some times I do stupid things...should have just stuck with FlashFire.
I've tried odin back to stock, it keeps failing. it says nand write fail and it stops. I've tried many different times. I've run Odin 3.10.6 and 3.10.7 I have the latest drivers, it recognizes the device but it will not load anything via odin. I've tried on two different computers as well.
...
Gizmoe said:
...
Click to expand...
Click to collapse
I have a Galaxy s6 edge btw. Not much info on the edge, in desperation, I'm combing thru galaxy s6 forums seeking answers. I have been rooted for awhile. I wanted to turn off the nagging volume warning so I downloaded a zip file to flash but only to find that my twrp recovery was no longer there. So I try to download twrp and flash. Now I'm in a boot loop with the turquoise screen telling me to use a verzion tool to reset the device. Klies says my phone isn't compatible as well as smart switch. Odin fails every time after NAND WRITE. I'm about to microwave this crap and get new phone.
keith7120 said:
I have a Galaxy s6 edge btw. Not much info on the edge, in desperation, I'm combing thru galaxy s6 forums seeking answers. I have been rooted for awhile. I wanted to turn off the nagging volume warning so I downloaded a zip file to flash but only to find that my twrp recovery was no longer there. So I try to download twrp and flash. Now I'm in a boot loop with the turquoise screen telling me to use a verzion tool to reset the device. Klies says my phone isn't compatible as well as smart switch. Odin fails every time after NAND WRITE. I'm about to microwave this crap and get new phone.
Click to expand...
Click to collapse
Did you ever get your phone up and running? I ran into similar issue with odin. After looking around on web I found a forum that mentioned using an older version of odin.
---------- Post added at 06:50 PM ---------- Previous post was at 06:44 PM ----------
Fe Mike said:
Did you ever get your phone up and running? I ran into similar issue with odin. After looking around on web I found a forum that mentioned using an older version of odin.
Click to expand...
Click to collapse
Sorry I saw you tried other odin versions 3. 10.x, I meant going lower. 3.09 is recommended for jb/kk but that worked for me.
Not sure if my phone is a lost cause and only good as a door stop. My phone at one stage would only display a screen asking me to plug into smart switch to recover the phone so I tried that but smart switch wasn't happening. I downloaded the latest stock rom and installed it successfully via ODIN but now my phone will not get past the boot logo. I can only get into download mode, Any advise on if I can get my phone working again?
Thanks
Andrew
andrew88 said:
Not sure if my phone is a lost cause and only good as a door stop. My phone at one stage would only display a screen asking me to plug into smart switch to recover the phone so I tried that but smart switch wasn't happening. I downloaded the latest stock rom and installed it successfully via ODIN but now my phone will not get past the boot logo. I can only get into download mode, Any advise on if I can get my phone working again?
Thanks
Andrew
Click to expand...
Click to collapse
Bro, I've been there and this is why I made an account on xda to see if my s6 (G-920F) can be fixed in any way. Yesterday I had the same thing as you when I tried to re-flash the phone with its proper, latest stock-ROM (UK/EE Nougat 7.0). Given how it hadn't worked, the update attempt through Odin screaming a big "FAIL!" at me, I was afraid I had bricked it completely, so I proceeded to re-install TWRP with Odin by putting the phone in download mode. I wiped the phone again with TWRP and now I'm not sure what I have to do as I am stuck with the UK Nougat bootloader and nothing else on it.
Before this whole ordeal I had rooted the phone and unlocked the bootloader following some instructions from a Youtube video and successfully installed a nighty build of LineageOS, which was buggy as **** (couldn't answer calls, use data, use the camera and a ****ton of apps were just not working). Dumbly enough, I thought I could just remove it through a wipe and put something else back on it but oh was I wrong.
Right now I'd just want to get my phone back to working (like you), as I am out of a job and need to be able to take phone calls with a normal, working phone.
Sorry I couldn't be of much help, but yeah maybe a first step towards fixing it would be to flash TWRP recovery on it and through the terminal, see what bootloader version you have with the command "getprop ro.bootloader". At least you will know the version of the broken bootloader you're experiencing difficulties with and *hopefully* an actual dev from the forums will entertain themselves in trying to solve this noobish puzzle we've created for ourselves.
Seriously, if there is a dev ready to board this crazy adventure with us, please help.
My namesake or username is pretty much a clue to what got me into this position.
I wish it was that simple for me mate, I cant access the recovery menu, I've tried flashing various recovery options but cant boot into any of them. I'm certain I could fix the phone if I could get to recovery. I'm now leaning towards it being a hardware fault with my phone. As you have access to recovery I think you may have more luck with your phone.
TerribleChoices said:
Bro, I've been there and this is why I made an account on xda to see if my s6 (G-920F) can be fixed in any way. Yesterday I had the same thing as you when I tried to re-flash the phone with its proper, latest stock-ROM (UK/EE Nougat 7.0). Given how it hadn't worked, the update attempt through Odin screaming a big "FAIL!" at me, I was afraid I had bricked it completely, so I proceeded to re-install TWRP with Odin by putting the phone in download mode. I wiped the phone again with TWRP and now I'm not sure what I have to do as I am stuck with the UK Nougat bootloader and nothing else on it.
Before this whole ordeal I had rooted the phone and unlocked the bootloader following some instructions from a Youtube video and successfully installed a nighty build of LineageOS, which was buggy as **** (couldn't answer calls, use data, use the camera and a ****ton of apps were just not working). Dumbly enough, I thought I could just remove it through a wipe and put something else back on it but oh was I wrong.
Right now I'd just want to get my phone back to working (like you), as I am out of a job and need to be able to take phone calls with a normal, working phone.
Sorry I couldn't be of much help, but yeah maybe a first step towards fixing it would be to flash TWRP recovery on it and through the terminal, see what bootloader version you have with the command "getprop ro.bootloader". At least you will know the version of the broken bootloader you're experiencing difficulties with and *hopefully* an actual dev from the forums will entertain themselves in trying to solve this noobish puzzle we've created for ourselves.
Seriously, if there is a dev ready to board this crazy adventure with us, please help.
My namesake or username is pretty much a clue to what got me into this position.
Click to expand...
Click to collapse
andrew88 said:
I wish it was that simple for me mate, I cant access the recovery menu, I've tried flashing various recovery options but cant boot into any of them. I'm certain I could fix the phone if I could get to recovery. I'm now leaning towards it being a hardware fault with my phone. As you have access to recovery I think you may have more luck with your phone.
Click to expand...
Click to collapse
Oh dear.
Yeah it does sound like something got deeply ****ed up in this case. I had the luck to somehow get past the smart switch error when the phone died of low battery. As I attached it to the charger I quickly boot it into download mode before the screen would become a bootloop again and that's where I was able to reinstall the latest version of TWRP recovery. After that, I was able to flash a stock ROM of Nougat that didn't have a ****ed up bootloader like I had. Specifically the one from this thread: https://forum.xda-developers.com/galaxy-s6/help/device-5-binary-3-s6-sm-g920f-t3706025
by forumber2.
It's the Netherlands stock-ROM. Not sure if you're from the US and the carrier would be wrong with that CSC, but it was a good bet for me. I got my phone back to working normally now.
Worst case scenario I'd say see if you have a phone repair shop nearby and ask them an opinion on what could be wrong. I'm just an amateur like you.
Still, I wish you the best of luck with it. Maybe there's still some hope. :/