I am relatively new at ROMs and I installed CyanogenMod 10 on my AT&T HTC One X (US) a couple of months ago. Recently, I tried upgrading to the M2 release of CM10.1 using the evita package which I understand is the US version of the ROM. I followed the same instructions I used to install 10.0 for 10.1. However, the installation froze and did nothing for a few minutes and gave me the message "no MD5 file found". I shut the phone down and restarted, but the phone would no longer start. I did a "system wipe" to get ride of the OS so I could re-install it, but now, my computer won't recognize my phone when I connect them and I can't move the CM10.1 zip file from my desktop to my phone. I have nothing already on the phone I can flash besides Team Win Recovery Project which is what I use for Recovery. I have no recovery files.
Did I just paperweight my phone, or is there a way to salvage this situation.
sliceroo said:
I am relatively new at ROMs and I installed CyanogenMod 10 on my AT&T HTC One X (US) a couple of months ago. Recently, I tried upgrading to the M2 release of CM10.1 using the evita package which I understand is the US version of the ROM. I followed the same instructions I used to install 10.0 for 10.1. However, the installation froze and did nothing for a few minutes and gave me the message "no MD5 file found". I shut the phone down and restarted, but the phone would no longer start. I did a "system wipe" to get ride of the OS so I could re-install it, but now, my computer won't recognize my phone when I connect them and I can't move the CM10.1 zip file from my desktop to my phone. I have nothing already on the phone I can flash besides Team Win Recovery Project which is what I use for Recovery. I have no recovery files.
Did I just paperweight my phone, or is there a way to salvage this situation.
Click to expand...
Click to collapse
Are you able to get into recovery?
joelrwise said:
Are you able to get into recovery?
Click to expand...
Click to collapse
Yes. I can get into recovery and the screen that tells you the root status of the phone.
sliceroo said:
Yes. I can get into recovery and the screen that tells you the root status of the phone.
Click to expand...
Click to collapse
If you can get into recovery then you aren't bricked just yet! If you have an sd card reader on your computer or know somebody who does thats one way you could get a new rom on your phone to flash. Most recoveries have a way to let you connect your phone to your computer for file transfer while in recovery. I believe in TWRP the option is in the Mount are. I could be wrong though. You just need to figure out how to get a new Rom on your phone. If none of the above work, one trick that has always worked for me, would be to put your sd card into someone elses phone, and download a known working rom onto your sd card via theyre phone, and just put it back into your phone. Hope i helped. Let me know how it goes man. I've been here before haha
joelrwise said:
If you can get into recovery then you aren't bricked just yet! If you have an sd card reader on your computer or know somebody who does thats one way you could get a new rom on your phone to flash. Most recoveries have a way to let you connect your phone to your computer for file transfer while in recovery. I believe in TWRP the option is in the Mount are. I could be wrong though. You just need to figure out how to get a new Rom on your phone. If none of the above work, one trick that has always worked for me, would be to put your sd card into someone elses phone, and download a known working rom onto your sd card via theyre phone, and just put it back into your phone. Hope i helped. Let me know how it goes man. I've been here before haha
Click to expand...
Click to collapse
I went into TWRP Mount and it allowed me to mount the phone. I went ahead and did that, but Windows told me that I had to format the disk. I agreed and Windows formatted it. Afterwards, I successfully copied over the CM10.1 Evita M2 zip file and the lates Gapps zip file. I then went to TWRP's install section and flashed both zips. TWRP told me both happened succesfully. However, while flashing over the CM10.1 file, it told me that no MD5 file was found and that it was just going to skip that. Then, it formatted some mke5 partition and then went ahead and finished. I wiped the Dalvik cache and the system Cache and restarted the phone. It is currently stuck at the "HTC Quietly Beautiful" intro screen and won't boot past that. Is there something I missed?
If that 10.1 already failed because of an MD5 problem, I wouldn't have tried to flash it again - the file probably has some problems in itself and either needs to be re-downloaded or just won't work.
Just flash the stock firmware or something - and use an MD5 checking program.
Pennycake said:
If that 10.1 already failed because of an MD5 problem, I wouldn't have tried to flash it again - the file probably has some problems in itself and either needs to be re-downloaded or just won't work.
Just flash the stock firmware or something - and use an MD5 checking program.
Click to expand...
Click to collapse
The thing is TWRP returned the status as successful despite missing the MD5 file. I'll try flashing over another package and if that doesn't work, I'll try flashing over CM10. If that still doesn't work, I'll just do stock firmware if I can find it somewhere, I guess.
In the future, making a backup is really awesome. Not saying that like "I told ya so" - but I've used them so many times myself, it's really great to say, "oops, I overlooked something" and then be able to just go back to a perfect snapshot of how things were before.
Also, how long did you let the phone sit at the boot screen ? It can hang for quite a while on the first boot.
Pennycake said:
In the future, making a backup is really awesome. Not saying that like "I told ya so" - but I've used them so many times myself, it's really great to say, "oops, I overlooked something" and then be able to just go back to a perfect snapshot of how things were before.
Also, how long did you let the phone sit at the boot screen ? It can hang for quite a while on the first boot.
Click to expand...
Click to collapse
Yeah I would just reflash a ROM that you've used before and that you know works. Chances are if the cm10.1 didn't work the first time its probably not going to the second time. And he has a point. First boot always takes forever. I've flashed a couple ROMs and thought I was bootlooped but I let it sit for a good 5-10 minutes and the setup screen finally came up.
joelrwise said:
Yeah I would just reflash a ROM that you've used before and that you know works. Chances are if the cm10.1 didn't work the first time its probably not going to the second time. And he has a point. First boot always takes forever. I've flashed a couple ROMs and thought I was bootlooped but I let it sit for a good 5-10 minutes and the setup screen finally came up.
Click to expand...
Click to collapse
I had no idea that it could take that long. I guess I'll just turn my phone on and see if it wants to start. I'll leave it going for a good five to ten minutes this time. Shutting the phone down while its still in the intro screen doesn't damage the OS, does it? Thanks for the advice so far guys, I really appreciate it.
Related
Hello:
I'm having a frustrating experience attempting my first root of my G2X.
I've had a previous thread from yesterday, attempting to do things from the Mac side:
http://forum.xda-developers.com/showthread.php?t=1172487&highlight=velanche
As of now, I've decided to revert to Windows 7 on my Mac to try and rectify things. I'm able to use One-Click Recovery Flasher, following the instructions, to flash the phone. I then downloaded an earlier nightly version of CM7, installed it on my flash drive, and did the install via ClockworkMod.
I had no errors from CWM, from the wipe to the install. I then choose the reboot open, and it powers off my phone.
Upon attempting to turn on my phone, I would get the LG screen, followed by a quick flash, followed by another LG screen with some horizontal blue background behind it. I'm taking it that it means that it's stuck, because I've waited 10 minutes before having to do a battery pull.
I did at one time attempted to flash back to the stock T-Mobile, but when the LG screen came it, it would just remain there without any progress.
At this stage, I don't know where else to go. I'm not sure if there's something amiss, because my phone, as far as I know, as been erased. If there's a way to progress to CM7, I'm game. But one thing I really need to do is to get my phone back.
I didn't backup my phone's contents initially because I was going to recreate everything anyway. Now I'm in a not-so-good place, save having to get a phone exchange.
Any assistance would be appreciated; thanks so much.
V.
Download one of the "Stock Rooted Nandroid Backups" from the development section, stick it on your SD card and do a Nandroid restore from CWM. That should get your phone working again...
On the CM7 installation problem, I have no idea what that could be. I've been flashing ROMs on Android devices since the G1 first came out a few years ago and the only reasons I had bootloops were from me trying to flash without wiping or flashing an unstable build.
Sorry to digress for a second here, but you DO have the T-Mobile branded G2x and NOT the Optimus2x, right?
Working on It
Hey thanks for the help.
I have a T-Mobile G2X, so I should have done everything the way I expected. Then again, things should have worked if I did.
So I installed the Nandroid recovery for my phone, and attempted recovery via CWM, but ended up with a MD5 mismatch error (whatever that means).
I even went so far as move select files from my SD card. I formatted it, then put in those select files i wanted to keep.
I tried again, and no change.
Any suggestions on how I should proceed? Thanks!
V.
I get the same kind of "just not going to happen" errors when I try to install EaglesBlood. I've found no solution, though CM7 works just fine. I don't know what to tell you, really...
Sent from my Nexus 5g using XDA Ultimate App
velanche said:
Hey thanks for the help.
I have a T-Mobile G2X, so I should have done everything the way I expected. Then again, things should have worked if I did.
So I installed the Nandroid recovery for my phone, and attempted recovery via CWM, but ended up with a MD5 mismatch error (whatever that means).
I even went so far as move select files from my SD card. I formatted it, then put in those select files i wanted to keep.
I tried again, and no change.
Any suggestions on how I should proceed? Thanks!
V.
Click to expand...
Click to collapse
The md5 mismatch will happen if you try to copy and past the files. Try it again but this time unzip it directly to the fold where it should be. Do not copy and past the unzipped folder. This is also someones backup so you must go through the restore option in cm
Sent from my LG-P999 using XDA Premium App
LordButtersI said:
I get the same kind of "just not going to happen" errors when I try to install EaglesBlood. I've found no solution, though CM7 works just fine. I don't know what to tell you, really...
I don't know if this might have anything to do with why I've had problems getting CM7 to work, but I've noticed that when I plug the phone either into Windows or OS X, I've somehow lost the internal drive. I know that it's there because I've found a whole bunch of files on it while in CWN, but I'm suspecting that there's some link between neither computer seeing the internal drive and the issue with getting the phone to boot.
Yes, I can mount the external drive, either from CWM's mount on both platforms or when I press both volumes on my phone and plug in to Windows 7 via USB.
Do you have any insight on this? I was watching a few of The Unlockr vids, and I noticed that even though the guy's phone was rooted and flashed, he still could boot into his phone until he was ready to put on the new ROM (CM7, in this case).
Thanks!
Click to expand...
Click to collapse
scooter247 said:
The md5 mismatch will happen if you try to copy and past the files. Try it again but this time unzip it directly to the fold where it should be. Do not copy and past the unzipped folder. This is also someones backup so you must go through the restore option in cm
I tried on the OS X side to do this, having to download an RAR app. I found the LG file, and told the app to extract it to the backup directory on my phone. I tried the restore again in CWM, but still a mismatch.
I will try it in Windows 7 tomorrow, and will let you know the outcome.
I'm beat; spent the whole weekend on this phone modding biz. I suspect I'll be really good by the time I finally am able to get things working.
V.
Click to expand...
Click to collapse
Is this an old SD card? Perhaps some bad sectors on it? Without holding the phone in my hands I can't think of anything else. Other than double check your steps, re-copy the files and try, try again.
The SD card is not old; about 2 months old. I tried formatting the card via Windows 7, but did it in FAT32. I take it that it's supposed to be formatted differently? The card is 16GB, but when I looked into CWM it's limit is 4GB.
I tried the steps again, and still get the same md5 mismatch. Is my guess correct that the card is supposed to be formatted a certain way? Unfortunately, I can access the previous OS via my phone, nor will the internal memory appear when the phone is plugged into the computer. However, I am able to mount the SD card within the computer's OS.
I almost feel like walking away from it for a week, but that means I'll be stuck without phone access for awhile. Tips or suggestions are most welcome.
BTW, there's apparently alternate instructions to deal with the md5 mismatch error. Though in Windows the NDIVIA driver is loaded for the phone, I tried the adb shell command but my device isn't detected by the software.
Thanks again,
V.
I was working fine, enjoying my new HTC One S with CM9 rom installed. Well the battery life wasnt the best on it, and i didnt install the custom kernel. So I looked for the custom kernel download(on my phone, not on my computer) and i found a .zip file. Well I thought that you could just download the kernel straight to my phone and open it up with "Rom Manager" which i did, it than said i needed to reboot the phone in recovery to continue the installation, so I did... it took me to recovery "to continue the installation" well than I looked away, looked backed down and it was black.... and i have tried powering up, booting into boot loader, booting into recover, and nothing... its just BLACK! nothing works, its literally useless ATM. I really messed up, is there anyway to fix this? Thanks in advanced!
----EDIT----
I think I accidentally flashed the kernel like i would normally flash a rom.... cause i downloaded the .zip file(directly to my phone, not using a computer), than i tapped the download and it asked me if i wanted to open it up with rom manager, so i did. and i think rom manager thought i was flashing a rom, when i wasnt, it was a kernel.... am i screwed? or is there anyway out of this?
Do you know the exact kernel you flashed--where did it come from
Some you need to extract and push
Assume you just tried to boot into bootloader thru phone buttons
Does your pc recognize your phone when plugged in, if so can you open a command window and try to access phone as in adb devices then adb reboot bootloader
assuming you are familiar with sdk adb/fastboot comands
otherwise i don't know what else to say--may be bad--sorry
Came from an XDA thread
Here is where it came from: http://forum.xda-developers.com/showthread.php?t=1708676 from "sun90" (half way down the page "CM9 KERNEL remix edition.zip - [Click for QR Code] (5.53 MB, 9 views) ")
i downloaded that straight to my phone and opened it up with Rom Manager, which i think the app took it as a rom, and installed it like a rom even though it was not a rom. I just tried to access it through adb, it comes up with no devices my PC does recognize it when i plug it in though...
Ive tried to get into bootloader tons of times, it just stays black... :'(
Thanks for your answer!
You flashed a galaxy s2 kernel on your one s? why would you ever think that was a smart thing to do?
Looking at the updater script in that zip it seems it wipes some partitions, the partitions on a SGS2 and the ONE S are different, so if that script accidentally wiped say the hboot partition, or some other critical-for-boot partition, you have a fully bricked phone.
For any devs that may know what partitions are what on the One S, the script wiped
mmcblk0p7, and wrote a zimage to mmcblk0p5
---EDIT---
Normally this is a cwm flashable zip on the Samsung Galaxy S II, which is why rom manager flashed it, as it met all the requirements, the only issue is, it was not made for the ONE S and probably overwrote some important things.
I tried for hours and hours to fix the same issue on a friend's One S (same symptoms, not same cause) to no avail. I tried QPST and telnet and a ridiculous amount of things. Had to bring it to the store and get a new one.
Good luck, but I don't believe there's anything you can do to fix it.
Just answered your question in the help thread, Didnt see this thread too !
Im afraid its not looking good, I think your best bet would be to call your provider and blame it on an OTA update.
And hope for the best
Alright, thanks for the help!
Well it looks like i bricked my phone than.... I thought that CM9 was only on the One S, so I just looked for the CM9 kernel, which obviously was for the sg2, i feel like such a dumb ass now! haha well thanks for all the help guys! ill be heading to the t-mobile store today to blame it on a OTA:]
yeah, others wont agree with what your about to do but........
just act like a complete noob, dont mention anything about software / firmware / ROMs / bootloader etc ect
just say your phone made a noise, you selected update and it died lol
good luck--I know it is heartbreaking
not sure of your situation with carrier, but you could go thru Retention if needed
Hi peeps.
i'm very new to all this but sort of know the basics
i'm running on Axiom now but tried to flash cm10 but after install i got a black screen so had to do a restore.
Today i just flashed venom and after the instal process is done, i hear the start up music but nothing on the screen.
I have had 3 other roms on my phone and never had a problem!
these are the steps i do
download rom - place on sd
put phone in recovery
reset factory
reset cache
install from sd
when it finish's reboot
blank screen.
Am i missing something?
Any help would be great and i can't post on the thread because i'm a noob with less than 10 and dont want to spam my way to the 10 :silly:
you are missing a lot, like reading the OP page and following install instructions
you missed separate flash of boot image and wiping system plus data and caches
i wipe system 3x to be safe
rugmankc said:
you are missing a lot, like reading the OP page and following install instructions
you missed separate flash of boot image and wiping system plus data and caches
i wipe system 3x to be safe
Click to expand...
Click to collapse
Thanks but i think that is now the least of my problems!
I used Goomanager and installed CM10, When I did it i installed teamwin recovery. It started to do a lot of strange things, when it finally rebooted i got a load of errors "phone is not working" nearly every 10 seconds?
it will not connect via usb, i discovered the the SD was not mounted.
I tried to mount the SD but it doesnt work, so i rebooted to recovery and tried to mount there but its coming up with - error unable to mount? ive tried everything but no joy
please please help
Thanks:crying:
see if this is your situation
http://forum.xda-developers.com/showthread.php?t=1630459
can you connect phone to pc and use fastboot commands
rugmankc said:
see if this is your situation
http://forum.xda-developers.com/showthread.php?t=1630459
can you connect phone to pc and use fastboot commands
Click to expand...
Click to collapse
I've got a mac
not sure what fastboot is.
I'll check out the link, and thank you very much for trying to help:good:
sorry i do know what fastboot is, yes can get in to it. but ive gone from CWM to teamwin recovery if i go in to the recovery section but that wont let me do anything because the mount. cant even load the phone up
I don't know Mac commands
My idea is to install htc drivers and set up fastboot/adb on pc--the info can be found in dev section on rooting
then open a command window and and boot into fastboot and flash a new recovery, maybe stock per the link, clear storage and try to get mounted
how did you unlock bootloader--
you will need to do alot of reading on adb/fastboot and flashing roms--first step is to have backups of rom and sdcard
since i don't the Mac commands to do fastboot, someone else will chime in at some point
you can alos go to the noob section in Q&A and resubmit your issue
someone will work you thru this, but in meantime study up on android sdk/fastboot/adb. a necessity to get out of these problems
you are not bricked, just need the info and right steps to get back on track
rugmankc said:
I don't know Mac commands
My idea is to install htc drivers and set up fastboot/adb on pc--the info can be found in dev section on rooting
then open a command window and and boot into fastboot and flash a new recovery, maybe stock per the link, clear storage and try to get mounted
how did you unlock bootloader--
you will need to do alot of reading on adb/fastboot and flashing roms--first step is to have backups of rom and sdcard
since i don't the Mac commands to do fastboot, someone else will chime in at some point
you can alos go to the noob section in Q&A and resubmit your issue
someone will work you thru this, but in meantime study up on android sdk/fastboot/adb. a necessity to get out of these problems
you are not bricked, just need the info and right steps to get back on track
Click to expand...
Click to collapse
im going to use someone elses alp top with windows. i'll ytry the all in one thing because thats how i rooted it in the first place. thanks for helping it means alot
good luck on it
so i installed the cm9 alpha, restored stuff via titanium backup (only green marked stuff, and some whites) and i got into a bootloop. so i went into recovery and instead of going into clockwork i used the factory reset thing at the start. (probably the main problem this happened)
so now when i boot up my phone, i cant access my sdcard. what do i do?
ive checked around ADB methods on pushing stuff over, but naturally that didnt work. so im basically stuck here. PLEASE HELP
Jahrern said:
so i installed the cm9 alpha, restored stuff via titanium backup (only green marked stuff, and some whites) and i got into a bootloop. so i went into recovery and instead of going into clockwork i used the factory reset thing at the start. (probably the main problem this happened)
so now when i boot up my phone, i cant access my sdcard. what do i do?
ive checked around ADB methods on pushing stuff over, but naturally that didnt work. so im basically stuck here. PLEASE HELP
Click to expand...
Click to collapse
Try using the All in One tool in the dev section to reflash CWM Recovery, then keep trying to ADB push a stable ROM zip to your SD card. It might take a few tries but it does work. I saved my phone from a similar situation a few weeks back using the ADB push method.
Sent from my HTC One S.
thats what im currently trying to do. for some reason clockworkmod recovery just wont work. whenever i try to go into recovery, the phone just boots instead. and i tried multiple times to push over a rom, but it just wont get past 4mb.
http://i.imgur.com/o0WZm.jpg
this is what happens.
keep in mind i had to scratch the whole using clockwork and used the other recovery instead. that atleast lets me get to recovery. but as you can see, it wont even push over 4mb out of the 137mb of the newest cm9 build.
let me explain what im doing, im following this guide (i dont quite understand what he means with the first part "flash your recovery back to stock" i just assumed he meant to reinstall the recovery, so tell me if i did something wrong here) http://forum.xda-developers.com/showthread.php?p=25557817#post25850720
and im also looking in the how to push a rom with adb thread aswell. i feel like im doing the right thing here, and dont know what else to do. this is getting frustrating. a phone with no memory isnt all that enjoyable
Jahrern said:
http://i.imgur.com/o0WZm.jpg
this is what happens.
keep in mind i had to scratch the whole using clockwork and used the other recovery instead. that atleast lets me get to recovery. but as you can see, it wont even push over 4mb out of the 137mb of the newest cm9 build.
let me explain what im doing, im following this guide (i dont quite understand what he means with the first part "flash your recovery back to stock" i just assumed he meant to reinstall the recovery, so tell me if i did something wrong here) http://forum.xda-developers.com/showthread.php?p=25557817#post25850720
and im also looking in the how to push a rom with adb thread aswell. i feel like im doing the right thing here, and dont know what else to do. this is getting frustrating. a phone with no memory isnt all that enjoyable
Click to expand...
Click to collapse
I used this thread to salvage my phone:
http://forum.xda-developers.com/showthread.php?t=1667929
I followed the instructions to the letter, and got the ROM pushed on the third try. I reflashed and was back in business.
Sent from my HTC One S.
i tried that one aswell, but since my sdcard is not mountable, "- Ensure in Recovery that your phone shows "Unmount /sdcard/" and "Unmount /system/" (If they do not show this automatically, just press each one once respectively as pressing just toggles Mount and Unmount) " wont work for me. and it says that the file has to be in tools instead of permanent-tools, and that also did not work for me. ive tried basically everything up until now. theres still one thing i dwell on, and that is to flash to stock recovery. i dont know where to find that for a Norwegian Telenor handset. i can find the t-mobile one, but thats pretty much it
I had the same problem what I did was, I went to fastboot locked my hboot, "fastboot oem lock" and flashed original RUU in fastboot. RUU you cam find in development section. But first you have to lock your hboot.
Sent from my HTC One S
kaiser347 said:
I had the same problem what I did was, I went to fastboot locked my hboot, "fastboot oem lock" and flashed original RUU in fastboot. RUU you cam find in development section. But first you have to lock your hboot.
Click to expand...
Click to collapse
i have to admit i have no idea what you mean here. im not pro at this, so i honestly didnt understand much of that. RUU is also something i dont "quite" understand what it. i think it is the OS itself or something.
i have no idea what i did, but i think i just solved my problem without even knowing why:s i just did the same **** over and over again. and i didnt push over anything. i just decided to "screw this, turn that phone on" went to storage and there the sd card was for some unexplainable reason. now i dont have any of my stuff though, that kinda sux
Jahrern said:
i have no idea what i did, but i think i just solved my problem without even knowing why:s i just did the same **** over and over again. and i didnt push over anything. i just decided to "screw this, turn that phone on" went to storage and there the sd card was for some unexplainable reason. now i dont have any of my stuff though, that kinda sux
Click to expand...
Click to collapse
Looks like you found out for yourself; I was going to say that you may have to reboot your recovery a few times before the SD card shows up. I think I had to reboot CMW four or five times before it showed. After that, I was golden. Well, after pushing the ROM zip twice, that is. Make sure you always have a back up or ROM zip on the SD card from now on. It sucks that you may have to resort to a blank slate, but it's better than being stuck with a $500 paperweight!
Sent from my HTC One S.
i actually had a backup, and 2 roms on my sdcard, but that obviously didnt help from now on i will keep a backup on my computer aswell as on the sdcard. if i could ever get my stock backup back that would help. looks like im not gonna have a stock backup anymore. anyone redirect me to some place i can find that just in case i ever need to revert back to stock? Norwegian Telenor based phone if that is info you needed to redirect me. thanks for all the replies guys
Yes, I'm a noob,to XDA, but I am pretty tech capable otherwise.
Yesterday, I unlocked the bootloader on my OneX, installed TWRP 2.3.x recovery, flashed CleanRom, ended up with a soft bricked the phone (still not sure what happened, but I think it was my stupid ancient work computer), tried to reinstall it, but the zip file was no longer in the SD card, tried to mount in recovery, but it was unsuccessful, tried to reinstall the 2.20 RUU, but it failed (all of these were probably B/C my work computer again). Gave up and came home. Got home to my modern PC, reformatted my SD, transferred Zips again and was finally able to get CleanROM to install correctly. All seems good, I setup the phone last night.
However, I have a problem with hyper-links that Scott has already acknowledged here:
http://forum.xda-developers.com/showpost.php?p=38936130&postcount=9922
I would have just asked this in that thread, but I don't have enough posts to write in Dev forums.
So, does anyone mind directing me to some basic instructions for 'flashing' the Link Fix Zip that Scott mentioned? I am assuming it is not the same method as installing the ROM.zip from TWRP, or is it?
After soft bricking yesterday, I'd really prefer some hand holding on this so that I don't mess up the successful CleanROM install.
Thanks in advance.
flash it in recovery just like the rom
jerrycoffman45 said:
flash it in recovery just like the rom
Click to expand...
Click to collapse
Thanks! That took all of 30 seconds plus reboot. Links working now.
Problem Solved.
Thanks Jerry!
please add solved and give thanks
DvineLord said:
please add solved and give thanks
Click to expand...
Click to collapse
Done, unless there is a tool for marking the thread "solved". I looked but didn't see anything.
NM, I figured out how to change the header.
So following the instructions here I rooted my LG Tribute 5 when I got it with Kingroot. And everything was fine for months. Until System Updates started to pop up regularly but I could never get them to install(they would error out). After a quick search I learned the updates won't install cuz the device was rooted. And a quick unroot would get the install to work.
I just unrooted through the kingroot app and started the updated. Before, when I tried the update it would error out about a quarter of the way through. This time the bar made it all the way to the end and then error'd out. I didn't think much of it. So since the device was stuck I took my battery out and back in. The device went through the boot process, then a No Command error popped up. Never saw that before.
So I tinkered with it a bit and kept getting the error. So I got into the Recovery Menu to do a full wipe and factory reset. I did that, but the No Command still popped up.
I know I can put a custom rom file on my external sd card and install that through recovery, right? The thing is I would like to install Slimrom, but there are a ton of downloads on the sites download page. So I'm asking for a little help on directions on a slimrom that will work on the LG Tribute 5.
And if there isn't a custom rom that works with a tribute 5,can I get a recommendation of one a custom rom that does? I'm into lightweight and minimalistic. By the way, I didn't have a custom rom on my phone, just had it rooted.
Thank you so much in advance for any and all help
No-one has any advice for me?
A little more info, the phone was on Android 5.1.1 before it started erroring out.
No-one has any advice for me?
A little more info, the phone was on Android 5.1.1 before it started erroring out.
Do you have a custom recovery as well? If it is only the stock recovery, which blocks most zips, your very option may be to use LG UP and the stock dz file and return the device to stock. The process to update can be done from that point.
I'm pretty sure I only have the stock recovery. I knew i should have installed TWRP...
So just search for LG UP and the stock firmware and they should be easily accessible?
Thanks for the reply xanscorp.
https://drive.google.com/folderview?id=0B0KV4b0_G1PQZW95ZmloejU5dFk
The LG UP program and .dz file are in there.
That's awesome! Thank you very much for linking the files for me.
I'm gonna do this in a couple hours when I get home and I'll let you know how it went.
Much appreciated xanscorp
One last stupid question... Just the LG Up and.dz files are the only two I need right?
I'm guessing so, but just wanna be sure.
Yes. It'll put you back to stock.
Unfortunately I haven't yet found how to get the ZV5 firmware fully rooted (i.e. a custom recovery) but it can be partially rooted with KingRoot. (http://www.kingroot.net/wap)
I just finally got around to giving this a shot. Sheesh....
Anyways I downloaded the files, put them on my external SD card, popped my SD card into my phone, then booted my phone to recovery. I went to install update from SD, and the phone didn't find any files. Hmmm....
I'm definitely doing something wrong. The .msi file looks like an executable. So I hopped onto Windows to install it. It installed, but when I run the program it can't find my phone when I plug it in.
I'm about to just give up, trash this thing, switch to a different provider and get another new phone. This time I won't mess with Kingroot. I'm pretty positive that's the app that screwed things up. I've had three different phones, rooted all three through different methods, and never had a problem.
Things files are to restore from a pc using LG Up for Windows... that's why it's a Microsoft Installer (.msi) file.
Yeah I figured that. But when I plug my phone into the computer my phone isn't recognized. I'm assuming because it boots straight to a No Command screen.
So since the computer doesn't recognize it neither does LG Up. Any trick to get around this?
Still haven't gotten this phone back to working. This is the first time I've really been stumped after a brick.
Please...anymore help?
Sent from my KFFOWI using Tapatalk
You find annything cause my same phone did the same thing
Sure haven't bud.
I've tried the help in the thread with no success