Database Info

BS_FREE_Lollipop_5.0_Rom_BPB1_Based

This is a modified version of @jrkruse stock BPB1 deodexed ROM with all(or most) of the stock BS removed.
INSTRUCTIONS:
I've included the links needed if you want to use xposed. If you chose not to use Xposed, then skip that step in the flashing process.
I have only used Safestrap to install this ROM, but FlashFire should work as well.
1) Flash NO_BS_BPB1_ROM_DEODEXED.zip
2) Flash Extra_toggles.zip
3) Flash xposed-v75-sdk21-arm-arter97-snapdragon.zip
4) Flash Lollipop_Safestrap_Reboot_Extended_PM_PB1.zip
5) Flash BPB1_Firmware_No_Bootloaders.zip
6) After first boot, open Lollipop Recovery Control and install the latest Safestrap.
7) Open up Viper4Android and install the driver. Then install Viper Fix 1.1.apk and run the Viper fix in the app.
There is no need to flash any Viper zips with this ROM. This ROM has all the same apps as BOK3 V5, but obviously updated to the BPB1 apps. The only app added is multiwindow. I don't use multiwindow, so I can be certain that all aspects of it work, but everything seemed to work normally when I played with it.
Note: Don't pay attention to the 1- prefix in front of some of the ROM versions. I prefix all my flashables in my ROM folder with a 1-, 2-, 3-, ect, so that I have them all in order when I flash them instead of having to remember the order every time lol. I forgot to remove those prefixes when I uploaded the ROMs.

reserved

reserved1

Can this be dirty flashed over your bs free bok3?
Sent from my SM-G900V using Tapatalk
---------- Post added at 05:14 PM ---------- Previous post was at 04:53 PM ----------
Just dirty flashed. All is good so far. Thank you
Sent from my SM-G900V using Tapatalk

I've downloaded it multiple times from multiple mirrors, I keep getting 6619258FCFF93587050F9E15B2FFBAA9 as the md5 not
a1d8316898d604314b884dafb09298b0 that is listed for 1-NO_BS_BPB1_ROM_DEODEXED.zip on the download page. I'll give it a try anyway since I can always reflash my NCG stock.
Edit:
It works! But now I have 492 errors anytime I want to download something from google play? Anyone else with this issue?

renthispace said:
I've downloaded it multiple times from multiple mirrors, I keep getting 6619258FCFF93587050F9E15B2FFBAA9 as the md5 not
a1d8316898d604314b884dafb09298b0 that is listed for 1-NO_BS_BPB1_ROM_DEODEXED.zip on the download page. I'll give it a try anyway since I can always reflash my NCG stock.
Click to expand...
Click to collapse
Does anyone know what exactly is new/improved in this BPB1? I feel like these versions keep getting released, but I have no idea what is actually improved LOL.

Thanks! Seems to be working well. Google Calendar kept force closing, so I removed it and installed the Play Store version.

Some apps seen to have a touch recognition problem, like titanium backup. Haven't had any FC errors.

renthispace said:
Edit:
It works! But now I have 492 errors anytime I want to download something from google play? Anyone else with this issue?
Click to expand...
Click to collapse
twelvevyan said:
Some apps seen to have a touch recognition problem, like titanium backup. Haven't had any FC errors.
Click to expand...
Click to collapse
I don't have any of these problems on mine. Does anybody else? It sounds like you guys might have some bad data from a previous ROM. The Play Store was updated in this ROM, so clear data for the Play Store, and that might fix the problem.
Stupifier said:
Does anyone know what exactly is new/improved in this BPB1? I feel like these versions keep getting released, but I have no idea what is actually improved LOL.
Click to expand...
Click to collapse
It is just security patches in this ROM. I haven't found anything really new.
btonetbone said:
Thanks! Seems to be working well. Google Calendar kept force closing, so I removed it and installed the Play Store version.
Click to expand...
Click to collapse
I wouldn't expect Google Calendar to work, because it's not in the ROM lol.

Few Questions
First, since I'm pretty new to flashing ROMs with SafeStrap...
At each step of your process when you say "Flash" does that mean Safestrap-> Boot to Recovery ->Install Zip ???
I'm looking at needing Xposed in order to bypass my company's Exchange security requirement of encrypting my device in order to allow email access.
I got a little confused with all the Xposed documentation out there.
Does this set of instructions get me to where I can load the Xposed module to bypass that security and then continue from there?
Big Thanks for your help.
I'm going to start a backup of current ROM so I'll be ready to install this soon.
Regards,
NerdyKowboy

NerdyKowboy said:
First, since I'm pretty new to flashing ROMs with SafeStrap...
At each step of your process when you say "Flash" does that mean Safestrap-> Boot to Recovery ->Install Zip ???
I'm looking at needing Xposed in order to bypass my company's Exchange security requirement of encrypting my device in order to allow email access.
I got a little confused with all the Xposed documentation out there.
Does this set of instructions get me to where I can load the Xposed module to bypass that security and then continue from there?
Click to expand...
Click to collapse
Yes, flash means install in Safestrap.
If you flash the Xposed zip I linked in the original post, then you can use modules in the Xposed installer app included in the ROM.

CVertigo1 said:
This is a modified version of @jrkruse stock BPB1 deodexed ROM with all(or most) of the stock BS removed.
INSTRUCTIONS:
I've included the links needed if you want to use xposed. If you chose not to use Xposed, then skip that step in the flashing process.
I have only used Safestrap to install this ROM, but FlashFire should work as well.
1) Flash NO_BS_BPB1_ROM_DEODEXED.zip
2) Flash Extra_toggles.zip
3) Flash xposed-v75-sdk21-arm-arter97-snapdragon.zip
4) Flash Lollipop_Safestrap_Reboot_Extended_PM_PB1.zip
5) Flash BPB1_Firmware_No_Bootloaders.zip
6) After first boot, open Lollipop Recovery Control and install the latest Safestrap.
7) Open up Viper4Android and install the driver. Then install Viper Fix 1.1.apk and run the Viper fix in the app.
There is no need to flash any Viper zips with this ROM. This ROM has all the same apps as BOK3 V5, but obviously updated to the BPB1 apps. The only app added is multiwindow. I don't use multiwindow, so I can be certain that all aspects of it work, but everything seemed to work normally when I played with it.
Note: Don't pay attention to the 1- prefix in front of some of the ROM versions. I prefix all my flashables in my ROM folder with a 1-, 2-, 3-, ect, so that I have them all in order when I flash them instead of having to remember the order every time lol. I forgot to remove those prefixes when I uploaded the ROMs.
Click to expand...
Click to collapse
1.) In safestrap, just do wipe->factory reset or is more of a wipe required?
2.) Can I flash them all using the Zip Queue in Safestrap (TWRP 2.7.1.0) or should I do them one at a time?

Factory reset in factory recovery. You can install all of them on one queue.

CVertigo1 said:
Factory reset in factory recovery. You can install all of them on one queue.
Click to expand...
Click to collapse
I did that, and this is AWESOME. Love the ROM. Tough to decide between the two launchers. Haven't had this level of control in a while.
Only snag was that Android Pay doesn't recognize the device as Android authentic, so can't use Android Pay (which I almost never used anyway).
Thanks for all the work @CVertigo1

NerdyKowboy said:
Only snag was that Android Pay doesn't recognize the device as Android authentic, so can't use Android Pay (which I almost never used anyway).
Thanks for all the work @CVertigo1
Click to expand...
Click to collapse
I believe Android Pay doesn't work sheerly because the device is rooted, not because of the ROM itself.

Can't get snapchat to login with Xposed. I've read the solution is to do an Xposed framework uninstall, login to Snap, then reinstall Xposed, but have found a lot of people get hung in a bootloop when uninstalling.
Is this from using the wrong uninstaller or something else?
Which uninstaller is correct?
Do you have another solution?
I have tried removing the modules and doing a reboot to see if that'd be adequate.
EDIT:
The issue was the xposed framework.
To anyone else doing this on Galaxy S5 with this ROM (or same version of Xposed)
1.) uninstall Snapchat
2.) Deactivate modules from Xposed
3.) Download and Flash "xposed-uninstaller-arter97.zip" from this post: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463
4.) Reboot and wait for all the apps to Optimize
5.) Reinstall snapchat and login
6.) Flash the same Xposed framework in original post of this thread (apps will re-optimize)

Is there a way to disable the high volume warning? I can't believe they now also have it on Bluetooth...

renthispace said:
Is there a way to disable the high volume warning? I can't believe they now also have it on Bluetooth...
Click to expand...
Click to collapse
Since Xposed is already in the ROM, inside of Xposed, go to Downloads & download the module "NoSafeVolumeWarning". Enable it and reboot.
Boom. No more volume warning.

NerdyKowboy said:
Can't get snapchat to login with Xposed. I've read the solution is to do an Xposed framework uninstall, login to Snap, then reinstall Xposed, but have found a lot of people get hung in a bootloop when uninstalling.
Is this from using the wrong uninstaller or something else?
Which uninstaller is correct?
Do you have another solution?
I have tried removing the modules and doing a reboot to see if that'd be adequate.
EDIT:
The issue was the xposed framework.
To anyone else doing this on Galaxy S5 with this ROM (or same version of Xposed)
1.) uninstall Snapchat
2.) Deactivate modules from Xposed
3.) Download and Flash "xposed-uninstaller-arter97.zip" from this post: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463
4.) Reboot and wait for all the apps to Optimize
5.) Reinstall snapchat and login
6.) Flash the same Xposed framework in original post of this thread (apps will re-optimize)
Click to expand...
Click to collapse
So were you able to uninstall Xposed? I see your edit of "fixed issue" but in case you didn't or having issues I posted this in another thread.
http://forum.xda-developers.com/showpost.php?p=65635081&postcount=18

al50 said:
So were you able to uninstall Xposed? I see your edit of "fixed issue" but in case you didn't or having issues I posted this in another thread.
http://forum.xda-developers.com/showpost.php?p=65635081&postcount=18
Click to expand...
Click to collapse
Yes, that fixed the issue.
Successfully uninstalled Xposed, Reinstalled SnapChat and logged in without issue. Then, reflashed the Xposed framework.
So easy, but I was so nervous doing it after seeing many, many people talking about getting hung in a bootloop.

[ROM][MT7-L09] MT7-L09C432B571 Stock Odex Safetynet Pass by Chudy_85

Hi all again. This it's secend my work and rom what i use all time.
What this rom have:
- Magisk v9
- Phh's Superuser
- Viper4Android v2.5.0.5
- Manual Call Recorder
- Double tap to wake up
- Lte on in statusbar and setting
- Show Network Speed
What it's integrade in this rom:
- Magisk Manager v2.5
- Phh's Superuser v.2.0.9 beta
- ViperFx
- TouchPlus ( to restore hide nav bar )
- AdAway
- Root Switch 1.3.3.2 ( to dissable xposed v87 recomended officiall
installed using Xposed Installer to pass Safetynet )
What i delete to need more space in the rom:
Google Video
Google Play Game
Google Music Player
Google Photo
Gmail
Google Drive
Google Book
Newsstand
How many space now we have in this rom???
We have now 150 mb free space in system rom!!!
How install this rom:
Restore your stock backup B571
Do it wipe system, data, cache and dalvick cache
Flash MT7-L09C432B571 Stock Odex Safetynet Pass by Chudy_85
Reboot Device and configurate
Now you have full safety and stable b571
How pass Safetynet ???
Open Magisk Manager and set permission Superuser
Go to setting and Enable Magisk Hide ( you can select here more as busybox and systemless hosts )
Reboot Device
Download from gp safetynet helper and check it.
You must have green and Safetynet pass
If you wany xposed working install XposedInstaller by dvdandroid and open
Download Official xposed v87 skd23 arm and install
When it's install reboot device and wait 10-20 minet to boot( if dont boot about 10 min reboot device again and wait )
You have install correct xposed
Now you can't pass safety net but we have nice too as Root Switch and here we must use
Open Root Switch and dissable xposed and reboot device
Now you can check you can pass Safetynet
Why i create this rom???
Because some game and apps use Safetynet to check you dont have modded rom and xposed
I use all time this rom because my son play in Pokemon and i use xposed. When he finish play i restore xposed and back my phone to me
Link ---> Download
Have now nice stable rom witch root, xposed and safetynet pass
Cheers :highfive:

Hello @chudy_85,
I'm testing your ROM right now.
And so far it runs smoothly.
But I don't understand for what is magisk manager .
Can u explain me for what is it . And how i can use it ?
Gesendet von meinem HUAWEI MT7-L09 mit Tapatalk

itzdroid95 said:
Hello @chudy_85,
I'm testing your ROM right now.
And so far it runs smoothly.
But I don't understand for what is magisk manager .
Can u explain me for what is it . And how i can use it ?
Gesendet von meinem HUAWEI MT7-L09 mit Tapatalk
Click to expand...
Click to collapse
Magisk manager work in systemless. It's work that same as supersu in systemless. We have official topic in xda how its work.
If you want you can create zip pack to flash and you dont need modded rom that same as xposed.
If you want you can use xposed but then you cant pass safetynet because your rom its modded and you can use some apps, games and android pay.

Hi Chudy
Thanks for all your hard work.
Will there be any problems if i add back google play and gmail and youtube.
Should the rom function as normal?
Thank you for your time

XenSA said:
Hi Chudy
Thanks for all your hard work.
Will there be any problems if i add back google play and gmail and youtube.
Should the rom function as normal?
Thank you for your time
Click to expand...
Click to collapse
Google Play and Youtube it's integrade with this rom. I delete Gmail because you can download from gp. It's install in data/app but not system. For me more space in system it's beter because rom work faster becuse he dont have somemore app to start and work in background.
If you want added you can do it manual if you know how

chudy_85 said:
Google Play and Youtube it's integrade with this rom. I delete Gmail because you can download from gp. It's install in data/app but not system. For me more space in system it's beter because rom work faster becuse he dont have somemore app to start and work in background.
If you want added you can do it manual if you know how
Click to expand...
Click to collapse
itzdroid95 said:
Hello @chudy_85,
I'm testing your ROM right now.
And so far it runs smoothly.
But I don't understand for what is magisk manager .
Can u explain me for what is it . And how i can use it ?
Gesendet von meinem HUAWEI MT7-L09 mit Tapatalk
Click to expand...
Click to collapse
Sent from my JAZZ using XDA-Developers mobile app

TWRP 3.0 error 7 instalo cust
Hi, I have a mt7-l09, when installing this rom or the previous ROM figure error 7, I have recovery of TWRP 3.0. I can not install any rom, before the previous version to this installed without problems, now does not install the previous version to this ROM. help. Thank you.

charlien09 said:
Hi, I have a mt7-l09, when installing this rom or the previous ROM figure error 7, I have recovery of TWRP 3.0. I can not install any rom, before the previous version to this installed without problems, now does not install the previous version to this ROM. help. Thank you.
Click to expand...
Click to collapse
First factory reset wipe all data,system,everything without sd card it'll show error while formatting cust ignore it then reboot your recovery and then flash this rom,it seems that you flashed wrong rom into your device
Second you must have twrp 3.0.2 to flash rom,twrp 3.0 have that kind of issues I was also get that error but as I flash twrp 3.0.2 problem solved I hope it'll help you..
For recovery go to
https://forum.xda-developers.com/ma...overy-twrp-2-8-7-0-mate7-android-5-1-t3156779

fazi2015 said:
First factory reset wipe all data,system,everything without sd card it'll show error while formatting cust ignore it then reboot your recovery and then flash this rom,it seems that you flashed wrong rom into your device
Second you must have twrp 3.0.2 to flash rom,twrp 3.0 have that kind of issues I was also get that error but as I flash twrp 3.0.2 problem solved I hope it'll help you..
For recovery go to
https://forum.xda-developers.com/ma...overy-twrp-2-8-7-0-mate7-android-5-1-t3156779
Click to expand...
Click to collapse
Hi thanks for replying I have TWRP 3.0.2-0. I had no problems before. I will try changing the recovery to stock install official room and return to TWRP 3.0.2-0 may be solved.

charlien09 said:
Hi thanks for replying I have TWRP 3.0.2-0. I had no problems before. I will try changing the recovery to stock install official room and return to TWRP 3.0.2-0 may be solved.
Click to expand...
Click to collapse
Yes you can try but back to stock give a try to wipe you cust if it'll give error then you also suffer from that problem that was I have when you flash stock it'll undone I have same problem I was flash wrong rom that's why it occurs "symlink" that's my own opinion you can try your own method but my suggestion is wipe all without sd card flash the recovery if you have twrp 3.0.2 then proceed with it then flash rom I was flash sir Ale rom and all work fine no errors of cust formatting and symlinks...
Best of luck hope you resolved your problem.

fazi2015 said:
Yes you can try but back to stock give a try to wipe you cust if it'll give error then you also suffer from that problem that was I have when you flash stock it'll undone I have same problem I was flash wrong rom that's why it occurs "symlink" that's my own opinion you can try your own method but my suggestion is wipe all without sd card flash the recovery if you have twrp 3.0.2 then proceed with it then flash rom I was flash sir Ale rom and all work fine no errors of cust formatting and symlinks...
Best of luck hope you resolved your problem.
Click to expand...
Click to collapse
Thanks again for responding. Perform the following steps.
1-wipe data, cache, system, cust
2-installed Chudy_85 ROM follows the same 7 error when installing.
Second method to do it all again wype this time, inventory recovery install update.app with 99% error. I can only install Backup Recovery Twrp. Excuse my translation

charlien09 said:
Thanks again for responding. Perform the following steps.
1-wipe data, cache, system, cust
2-installed Chudy_85 ROM follows the same 7 error when installing.
Second method to do it all again wype this time, inventory recovery install update.app with 99% error. I can only install Backup Recovery Twrp. Excuse my translation
Click to expand...
Click to collapse
Mention not please try sir Ale rom i think it will work after that you can flash any other rom this rom is stock based and Ale rom based on kangvip firmware give a try...

chudy_85 said:
Hi all again. This it's secend my work and rom what i use all time.
What this rom have:
- Magisk v9
- Phh's Superuser
- Viper4Android v2.5.0.5
- Manual Call Recorder
- Double tap to wake up
- Lte on in statusbar and setting
- Show Network Speed
What it's integrade in this rom:
- Magisk Manager v2.5
- Phh's Superuser v.2.0.9 beta
- ViperFx
- TouchPlus ( to restore hide nav bar )
- AdAway
- Root Switch 1.3.3.2 ( to dissable xposed v87 recomended officiall
installed using Xposed Installer to pass Safetynet )
What i delete to need more space in the rom:
Google Video
Google Play Game
Google Music Player
Google Photo
Gmail
Google Drive
Google Book
Newsstand
How many space now we have in this rom???
We have now 150 mb free space in system rom!!!
How install this rom:
Restore your stock backup B571
Do it wipe system, data, cache and dalvick cache
Flash MT7-L09C432B571 Stock Odex Safetynet Pass by Chudy_85
Reboot Device and configurate
Now you have full safety and stable b571
How pass Safetynet ???
Open Magisk Manager and set permission Superuser
Go to setting and Enable Magisk Hide ( you can select here more as busybox and systemless hosts )
Reboot Device
Download from gp safetynet helper and check it.
You must have green and Safetynet pass
If you wany xposed working install XposedInstaller by dvdandroid and open
Download Official xposed v87 skd23 arm and install
When it's install reboot device and wait 10-20 minet to boot( if dont boot about 10 min reboot device again and wait )
You have install correct xposed
Now you can't pass safety net but we have nice too as Root Switch and here we must use
Open Root Switch and dissable xposed and reboot device
Now you can check you can pass Safetynet
Why i create this rom???
Because some game and apps use Safetynet to check you dont have modded rom and xposed
I use all time this rom because my son play in Pokemon and i use xposed. When he finish play i restore xposed and back my phone to me
Link ---> Download
Have now nice stable rom witch root, xposed and safetynet pass
Cheers :highfive:
Click to expand...
Click to collapse
I have the Mate 7 version MT7-C900B522 on android 6.0 how can I get that version?
---------- Post added at 09:51 PM ---------- Previous post was at 09:42 PM ----------
fazi2015 said:
Mention not please try sir Ale rom i think it will work after that you can flash any other rom this rom is stock based and Ale rom based on kangvip firmware give a try...
Click to expand...
Click to collapse
I have the Mate 7 version MT7-C900B522 on android 6.0 can I install the Ale rom?

You can try but I flash over b571

chudy_85 said:
You can try but I flash over b571
Click to expand...
Click to collapse
Can you tell me if xposed works ok with the rom? If it does can you share the version I should use? Thanks in advance!! :good:

reasonz20 said:
Can you tell me if xposed works ok with the rom? If it does can you share the version I should use? Thanks in advance!! :good:
Click to expand...
Click to collapse
Xposed v78 official you can download from official topic

thanks for answering. I continue with error 7 when installing any rom. I think error 7 is given after using the Xposed Mobile Faker module. I have TWRP 3.0.2-0 recovery. Before using the module xpoded mobile faker could install any rom. Change to recovery stock eh install B571 full update.app with error at 99%. I think that the module xposed mobile faker corrupt some binary or scrip, may be possible?.
I can only install TWRP recovery backup. But no zip nor update.app with recovery stock
---------- Post added at 09:46 PM ---------- Previous post was at 09:15 PM ----------
fazi2015 said:
Mention not please try sir Ale rom i think it will work after that you can flash any other rom this rom is stock based and Ale rom based on kangvip firmware give a try...
Click to expand...
Click to collapse
Ok, install this rom. I hope I have no mistakes. regards

Install Ale95 kingvip v3.1 with error 7. The error is after or during installation Cust or simlinks. Both in this rom as in other roms.

..

Please write in correct topic. Don't spamming. If you have error write in @Ale95 topic

cant login to Snapchat

I can't log into Snapchat on my OnePlus one. This has started very recently, after a factory reset.
My account is not locked, as I have logged in on my iPhone. I did try to unlock it however to no avail.
I have no 3rd party Snapchat apps installed.
Some apps I have that might be causing the problem:
Titanium backup
Magisk manager (with magisk hide enabled)
Catlog
FX file explorer
Rom: resurrection remix (6/20 update)
Kernel: resurrection kernel
A0001(bacon)

yeah its because of root, UNroot then log in then root again. its the most simple way.

I Found the reason and the resolution in the OnePlus 3T forum:
https://forum.xda-developers.com/oneplus-3t/help/snapchat-fail-login-root-t3571405
"Snapchat checks for root and purposely prevents you from logging in if it find it. If you rooted with SuperSU, try installing Chainfire's SUHide. Otherwise, if you rooted with Magisk, enable MagiskHide in Magisk Manager."
It took forever to find this solution, it worked!
I use SU# and it was simple to "unroot" from within the SU# app
1. click on the settings in the upper right, scroll down to the "cleanup" section, select full unroot, accept all the warning messages, the phone will reboot into recovery and then reboot the phone after it finishes. Your phone may cycle through the reboot process a couple of times
2. log back into your phone, then you can log into the Snapchat app.
3. now you can re-root your phone, if you want to.
Cheers.

For me the easiest way was to install SC in other nonrooted device and log in. After that, use Titanium Backup to export the data app, then from the rooted device just import data and that was it.

leokook said:
For me the easiest way was to install SC in other nonrooted device and log in. After that, use Titanium Backup to export the data app, then from the rooted device just import data and that was it.
Click to expand...
Click to collapse
I wonder why they have such dumb policies.Can't they just simply increase their encryption level? Other social apps don't have any issues with root and they're also secure af!

Major Issue w/ Snapchat

Hello.
First of all, here is my device:
Code:
Samsung Galaxy S7
Model: SM-G930F
ROM: [URL="https://forum.xda-developers.com/galaxy-s7/development/rom-ryzen-rom-v1-0-t3667900"]Aspiration S8 Port V1.0[/URL]
Root: SuperSU
After I installed this ROM (with xPosed), I wanted to set up Snapchat. When logging in, I get the error some people receive when they got a rooted phone. I did a lot of research and found three methods:
Uninstall xPosed (via recovery), restart, install Snapchat, login, reinstall xPosed - DID NOT WORK
Create a Backup using Bluestacks 2.5 and B.S-Helper - DID NOT WORK, I COULD NOT EVEN LOGIN INTO SNAPCHAT WITHOUT ROOT ON BS
Using the function "Hide Magisk"
As you see, the first two options won't work. So my question is, how do I change my root from SuperSU to Magisk? And will this option work for sure with Snapchat? As I am very frustrated and sad, I would be honored if anybody would give me a tip.
Sincerely
Vesanius
EDIT: For all those, who got the same issue, I would like to let you know that the third method works. You have to uninstall Snapchat, uninstall xPosed (incl. modules), install the ROM again without wiping any data and choosing Magick instead of SuperSU, install Snapchat, login and then install xPosed. I hope that helps some of you folks.

Vesanius said:
EDIT: For all those, who got the same issue, I would like to let you know that the third method works. You have to uninstall Snapchat, uninstall xPosed (incl. modules), install the ROM again without wiping any data and choosing Magick instead of SuperSU, install Snapchat, login and then install xPosed. I hope that helps some of you folks.
Click to expand...
Click to collapse
You could have used a third party app (Like Root Switch) to hide your root without re-flashing your ROM or switching to Magisk

Tiqqy said:
You could have used a third party app (Like Root Switch) to hide your root without re-flashing your ROM or switching to Magisk
Click to expand...
Click to collapse
Oh, I forgot to mention this method. It also didn't work.
Gesendet von meinem SM-G950F mit Tapatalk

Vesanius said:
Oh, I forgot to mention this method. It also disn't work
Click to expand...
Click to collapse
Oh, thas odd. Because I had the same issue and this worked like a charm. I had to restart my phone because it would not let me unhide it and that did the trick.

Shelter/Island/Insular work profile on rooted samsung phone

As we known when samsung phone is rooted then Knox is tripping so multi user with a work profile isn't possible with the error message... can't create work profile.
This is howto guide to bypass Knox security so Shelter works on it, after many tries and errors methode
My setup
- S20 magisk zygisk root android 13
- Magisk modules: lsposed, knoxpatch apk and enhancer (in lsposed), shamiko as blacklist mode, safetynet fix
- Shelter
Guide
- Root your samsung phone with zygisk magisk (25.2) and install those magisk modules. Reboot several times
- In Lsposed enable KnoxPatch module with suggested Recommended. Reboot
- In Magisk Settings change Multiuser Mode > Device Owner Managed (using in multi user profile)
- In Magisk Settings change Mount Namespace Mode > Inherit namespace. Reboot
- Install Shelter and create work profile following Setup Wizard
- Clone the needed apps to Work profile or install directly from Shelter Work Profile
- In Magisk configure DenyList with those apps in work profile
My rooted S20 works fine in Work Profile with my company apps Microsoft Authenticator, Company Portal, Outlook, Teams etc.
Hope it helps for you guys too.
Further process how to make company apps work on Work Profile created by Shelter/ Island needs follow steps
- Install Applist Detector to check root
- Install InitrcHider (zygisk version) in Magisk
- In Magisk configure DenyList with full denying for those company apps (ticks all processes)
- Uninstall Magisk from Settings/ Apps, not directly from Magisk! because if doing it from Magisk then you loose the root
- Check root again with AppList Detector
- Delete company apps data and cache from Settings/ Apps then setup those apps again as new

gsmdb said:
As we known when samsung phone is rooted then Knox is tripping so multi user with a work profile isn't possible with the error message... can't create work profile.
This is howto guide to bypass Knox security so Shelter works on it, after many tries and errors methode
My setup
- S20 magisk zygisk root android 13
- Magisk modules: lsposed, knoxpatch apk and enhancer (in lsposed), shamiko as blacklist mode, safetynet fix
- Shelter
Guide
- Root your samsung phone with zygisk magisk (25.2) and install those magisk modules. Reboot several times
- In Lsposed enable KnoxPatch module with suggested Recommended. Reboot
- In Magisk Settings change Multiuser Mode > Device Owner Managed (using in multi user profile)
- In Magisk Settings change Mount Namespace Mode > Inherit namespace. Reboot
- Install Shelter and create work profile following Setup Wizard
- Clone the needed apps to Work profile or install directly from Shelter Work Profile
- In Magisk configure DenyList with those apps in work profile
My rooted S20 works fine in Work Profile with my company apps Microsoft Authenticator, Company Portal, Outlook, Teams etc.
Hope it helps for you guys too.
Click to expand...
Click to collapse
Does the above steps really working bro?
Please help me bro
Device Details:
Samsung S10
Custom ROM: One UI 5.1 android 13 by Ivan_meler
Issue: unable to use intune company portal and Island
Please guide me how to do it bro. The above instruction not working for me bro

Did it work for you to install Island?
The scoop is how to make Shelter/ Island/ Insular work with rooted Samsung.
Further process how to make company apps work on Work Profile created by Shelter/ Island needs follow steps
- Install Applist Detector to check root
- Install InitrcHider (zygisk version)
- In Magisk configure DenyList with full denying for those company apps (ticks all processes)
- Uninstall Magisk from Settings/ Apps, not directly from Magisk (important!) because if doing it from Magisk then you loose the root
- Check root again with AppList Detector
- Delete company apps data and cache from Settings/ Apps then setup those apps again as new

Thanks for your reply bro
My first issue is that when i try to install shelter or island it starts, loads and restarts automatically bro
Rooted, installed above modules and followed the instruction bro.

Are you sure your Knox works? Samsung Health, Biometrics, Samsung Pass etc?
It looks like you've trouble with Knox.
You can try enable multi user (per default disabled in Samsung) either using Firefds Kit module in Lsposed or edit the build.prop with
#Multi user
fw.max_users=3
fw.show_multiuserui=1

I have attached the screenshots bro. Please check. Yea even i think knox is not working it is tripped and i m using custom rom bro. If i use intune on main profile it says you need to enable encryption and in island profile it is not even registering profile. Samsung pass doesnt work bro...other samsung apps works properly when i use lsposed knox enhancer bro

My knox is tripped too because unlocking bootloader.
I'm using stock ROM with custom kernel rooted with magisk. The phone is still encrypted.
Your case is using a decrypted ROM. You can search in xda flashing custom ROM without decryption.
The official twrp doesn't decrypt the data partition, the biggest catch will be that you will not have the data partition in a twrp backup. But apart from that, twrp will still work for installs and updates and backups og the system and cache partitions.
Use smart switch doing backup in stead.

gsmdb said:
My knox is tripped too because unlocking bootloader.
I'm using stock ROM with custom kernel rooted with magisk. The phone is still encrypted.
Your case is using a decrypted ROM. You can search in xda flashing custom ROM without decryption
Click to expand...
Click to collapse
Can u suggest any rom bro?
MY device is S10, and dont want to use pixel or different rom , want only one ui ported rom bro android 13

gsmdb said:
My knox is tripped too because unlocking bootloader.
I'm using stock ROM with custom kernel rooted with magisk. The phone is still encrypted.
Your case is using a decrypted ROM. You can search in xda flashing custom ROM without decryption.
The official twrp doesn't decrypt the data partition, the biggest catch will be that you will not have the data partition in a twrp backup. But apart from that, twrp will still work for installs and updates and backups og the system and cache partitions.
Use smart switch doing backup in stead.
Click to expand...
Click to collapse
How to do it bro using smart switch

You can still use One UI5.1 ivan_meler custom ROM. Nothing wrong with it.
You must flash stock ROM first to get back encrypted. Set it up until your phone is working.
Flash twrp and get custom ROM on external SD card.
Follow your own process to flash custom ROM with twrp.
In twrp do wipe dalvik and cache as usual. DON'T format Data. Doing it will get your phone decrypted.
Install your custom ROM.
I did it as remembered back to the days with my old s10 with custom ROM android 10.

gsmdb said:
You can still use One UI5.1 ivan_meler custom ROM. Nothing wrong with it.
You must flash stock ROM first to get back encrypted. Set it up until your phone is working.
Flash twrp and get custom ROM on external SD card.
Follow your own process to flash custom ROM with twrp.
In twrp do wipe dalvik and cache as usual. DON'T format Data. Doing it will get your phone decrypted.
Install your custom ROM.
I did it as remembered back to the days with my old s10 with custom ROM android 10.
Click to expand...
Click to collapse
In the official TWRP My SD card shows only 117MB instead of 128GB bro. So i will try adb sideload bro

Probably your SD card is formatted with ExFat which isn't visible in twrp.
Try FAT32 in stead.

{the file is too large for destination} -b cant able to transfer file more than 4gb bro after formatting SD card to FAT32

Bro in island work profile, intune looks like this only bro, I did click in check device settings multiple time bro nothing happens bro but in the main profile I can install and register my device in intune bro and use my company mails and teams bro

You do know how to use island? You can only use one intune app either in main or work profile. Clone or install directly in work profile and uninstall from the main profile.
Did you check the root from work profile with Applist detector? Install Applist Detector in work profile and run.
In my work profile my device settings is registered as unknown, but ok because it does pass all checks from company apps.