I've found almost no kernels for the sprint s6 edge 6.0.1
the ones ive found is ram's stock rooted, DirtyMM (Cant find xda page), and Aurora
I cant get synapse to work with aurora i just get device not supported even with UKM installed, someone else had the same issue
So i was wondering if theres other kernels aside from this list that i dont know?
Related
Hello, I just rooted my Samsung galaxy note 10.1 gt-8013 running jelly bean. for the first time a few days ago. It was the first time I rooted anything. The reason I wanted to root it was pdroid. I have installed 3 or 4 different roms on it trying to get pdroid to work on them with no luck. I have also used the auto patcher like it says to. The tablet says it's installed, and have ran the auto patcher multiple times on each rom. When I look for it in the market it still won't show up. So I'm starting to get a little frustrated because I'm not sure if I'm just not using the auto patcher correctly or if it's just does not work on my table. If anyone knows of a rom that comes with pdroid with it. Or if anyone can point me to a rom and has the patch for pdroid. Any help would be appreciated.
Gustapholiz said:
Hello, I just rooted my Samsung galaxy note 10.1 gt-8013 running jelly bean. for the first time a few days ago. It was the first time I rooted anything. The reason I wanted to root it was pdroid. I have installed 3 or 4 different roms on it trying to get pdroid to work on them with no luck. I have also used the auto patcher like it says to. The tablet says it's installed, and have ran the auto patcher multiple times on each rom. When I look for it in the market it still won't show up. So I'm starting to get a little frustrated because I'm not sure if I'm just not using the auto patcher correctly or if it's just does not work on my table. If anyone knows of a rom that comes with pdroid with it. Or if anyone can point me to a rom and has the patch for pdroid. Any help would be appreciated.
Click to expand...
Click to collapse
I too hope a dev will one day integrate pdroid, on a multiwindow capable rom, until cm integrates this feature, i guess that means stock roms for now.......either integrate, or build their rom in such a way that is compatible with a pdroid patch .
Over on the official thread, looks like the dev has added stock compatibility, but i suspect its for specific stock roms, could be wrong
Over on the official thread, looks like the dev has added stock compatibility, but i suspect its for specific stock roms, could be wrong
Click to expand...
Click to collapse
Where did you find this? if stock roms can be pacthable it's just what i want!
Mr-Kappa said:
Where did you find this? if stock roms can be pacthable it's just what i want!
Click to expand...
Click to collapse
I think it was for very specific devices, if i got the gist of it right, i think a dev needs to implement it into a rom specifically for our note 10's
yes,but i've no knowlegde at all for doing this. i was hoping you found something.
XPrivacy
banderos101 said:
I too hope a dev will one day integrate pdroid, on a multiwindow capable rom, until cm integrates this feature, i guess that means stock roms for now.......either integrate, or build their rom in such a way that is compatible with a pdroid patch .
Over on the official thread, looks like the dev has added stock compatibility, but i suspect its for specific stock roms, could be wrong
Click to expand...
Click to collapse
I found out something similar to pdroid... it's called XPrivacy and runs on top of the Xposed framework. it needs root but it's pretty straight foward to install and use. it also works for pratically any rom including stock.
you can find the installation/user guide on github https://github.com/M66B/XPrivacy
I'm not 100% sure but there's an article on this on android police. it works like a charm for me (jb 4.1.2 on stock)
hope you find it usefull like i did!!
Mr-Kappa said:
I found out something similar to pdroid... it's called XPrivacy and runs on top of the Xposed framework. it needs root but it's pretty straight foward to install and use. it also works for pratically any rom including stock.
you can find the installation/user guide on github https://github.com/M66B/XPrivacy
I'm not 100% sure but there's an article on this on android police. it works like a charm for me (jb 4.1.2 on stock)
hope you find it usefull like i did!!
Click to expand...
Click to collapse
Thanks Mr, ive actually got it installed already, but others may not know about it, so thanks for that.....brilliant idea.......i recommend to anyone in a similar situation
Just found out about the new cyanogemod one-click installer being released in the play store.
(can't post link, sorry!)
I know infuge 4g isn't on there, but isn't this phone technically a rebranded and modified S2? I'm wondering if there's a chance it could work.
What do you think?
because of the humminbird soc in the infuse, its more like an s1 than an s2. its not just a rebranded device, it was an interim device commissioned to get 4g phones on att without waiting for the s2 to be released. does not run cm roms from either. and as its not running official from cm, itll never be on the cyanogenmod installer.
https://play.google.com/store/apps/details?id=org.cyanogenmod.oneclick&hl=en <- here is the cm installer in the play store, but dont use it.
http://wiki.cyanogenmod.org/w/CyanogenMod_Installer#Supported_Devices <- here is the list of supported devices, the infuse is not on it.
http://forum.xda-developers.com/showthread.php?t=1776129 <- heres cm10.2 for the infuse, it runs well, install it.
http://forum.xda-developers.com/showthread.php?t=2517092 <- heres cm11 for the infuse, it doesnt run well yet, wait to install it.
I don't see why someone would use this. You either know how to root and have already done so with the proper procedures, or you don't know what rooting/flashing is and you don't find out about the Cyanogenmod installer.
So they plan to market rooting and flashing a ROM to people who have no idea what any of it is for and the capabilities of root are.
Story how i got that idea
(Skip this if u dont give a single **** about other people)
Can anyone please help me
I have a Galaxy S3 with a half-way-broken Screen. The reason why i say half-way is because the display actually works butt has very very low brightness so i am not able to see anything on my screen when i go outside or go into a room that is bright. Before i got this S3 i had many other phones like Omnia 2,Galaxy s2,Galaxy Note, and so on and i remembered a feature from siyah kernel on my Galaxy S2 wich allowed u the set a GAMMA SHIFT up to 50+. It was goddamn bright and i also knew that the siyah kernel is also awiable for the S3. After flashing it i was very dissapointed because exactly this feature was not there anymore. I flashed al the older versions of siyah kernel i found but non of them had gamma shift. Then i searched for another Kernel that could have this feature but i was not lucky at all. I quit messing around with my phone and used it as it is even it was a real pain in the ass. Some days later one of my friends who is also a person that has very good knowledge about android, ROMs, Kernels,.... He told me about that he has succesfully flashed a Galaxy Note 2 ROM to an Galaxy Note by only changing the files in the meta-inf folder from GT-N7100 to GT-N7000. When i heard about this i have tried to do the same with the siyah kernel from s2 to convert into a s3 kernel with the features from the s2 kernel that was missing. So long i had no luck by converting it. i have also looked up to threads in there people show how to convert ROMs from phones to ROMs for another phones.
THE REAL QUESTION!!!!
Is it possible to convert a phones kernel to another phone?
If yes, how do i do it?
Which programms do i need?
Can anyone please help me with that?
Hi there
You can learn more about kernel development here: [GUIDE] Build Your Own Android Kernel{Easiest and Fastest Way] [Using The NDK]
Here is also a video guide : [TUTORIAL][VIDEO]Build your own Android kernel
Good luck
Hey guys, I've been searching around for a rom that is compatible with the Sprint variants of the G920/G925. I've been having lots.. and I mean LOTS of trouble finding a rom that works with my phone (I have a G925P). An answer to this would really help me out ^^
I do have a list of what I want in roms as well, I'm looking for the following:
Rom is running Android 6.0.1 and beyond
Currently being maintained
Debloated and De-Knoxed
Compressed Size
Have apps like Android Pay to work (Apps using SafetyNet)
Has option to keep stock kernel for Magisk and Systemless Xposed
Multi-user Support
Battery Friendly
Allows for lockscreen customization/custom lock apps
And there you go, that's mainly what I'm looking for. Now, if it's an entire OS like LineageOS, I'm willing to try it but, it must fall within the lines of what I'm looking for (or as close as possible). Any answer would be acceptable IF it runs on my phone without any problems (basically, just throw out any answer you have).
Also, here is a list of ROMs I have already tried/searched:
Renegade v7 (No longer being maintained but I am currently using it)
LineageOS (Someone else confirmed that the kernel isn't compatiable with the G920P/G925P)
Mostly Stock for Samsung S6 Edge (I actually plan on trying this one again, as it is debloated and looks more like the stock so I can use more Xposed Modules)
CarRom HD (This bricked my phone after flashing the kernel, data didn't work when I had gotten it to work BEFORE I bricked it)
Alexis ROM (Doesn't work with Sprint variants)
I'm currently using Big Daddy PL3 Aroma V1.x which works great. I haven't been able to get magisk to work as of yet, but everything else is great.
Hey,
Just wondering if anyone has or is working on a Nethunter Kernel for OP7 Pro.
Everything but the kernel with wifi adapter support is already in Magisk, so just the kernel is needed these days.
Damn, I guess it's not needed here.
Get source for one of the custom kernels that are already available . And then apply the net Hunter kernel patches and compile
https://github.com/offensive-security/kali-nethunter/wiki/Modifying-the-Kernel
Let us know that works out for you...
so one must use the source from a custom kernel and not the official? what is the reason for that?
was considering to try and build one but has never done it before, watching this video it doesn't look that hard
something else I should have thought about before trying to build one?
Did anybody get the nethunter kernel complied I get errors Everytime I do it ,hoping somebody else had better luck and would not mind sharing