Hey XDA I have decided to root my yuphoria(YU5010A) and start exploring it's capabilities however I do not know how to use adb nor can I get my hands on a pc right now. That means I have to gain root access(already done) and install a recovery all from my phone itself. I did try to do it via terminal emulator but I hard bricked my yuphoria and had to get it repaired and I can't afford to lose my phone again so please tell me a method that's already tried and tested.
Regards Andbug
P.S. You are dealing with a noob so explain in detail.
u cannot flash recovery without pc! on yuphoria!!
reboot to fastboot mode and then connect ur phone to pc/lappy! type
fastboot -i 0x2A96 flash recovery twrp.img
Click to expand...
Click to collapse
u need adb and fastboot package As Usual
after flashing dont reboot remove the cable and battery!
after 20sec insert the battery and hold power and vol down button together when the phone shows YU logo leave the power button and start pressing vol down button continuously untill you see TWRP logo! after that it will ask you to allow Modifications to system! ALLOW IT and then down! you have twrp!
Just download any recovery.img from xda and flash it using flashify ..tried it on two yuphoria.works perfectly...
Root yu5010a with King root 1st
2nd Install flashify
3rd flash TWRP recovery manually with flashify
Related
My problem:
I had a temporary CWM installed on my Asus Zenfone 2 ZE551ML 4gb/32GB and without thinking, installed an OTA update form 2.20.40.63 to 2.20.40.90.
My phone booted to the Asus logo with the loading circle and got no further.
Sadly I did not have USB debugging enabled at the time so I cant detect it in ADB in recovery mode to sideload.
I have tried to copy firmware to my Micro sd and load from there but my phone has never recognised or mounted SD cards so that is out of the question.
As a last resort I tried flashing the Boot.img, Recovery.img, droidboot.img and system.img, now it wont even get to the asus logo without coming up with and android logo with a red triangle above it, the same logo that comes up when I now try to enter recovery mode.
I have recorded a video of the process I followed to flash the zfone, but cant post it here as this is my first post, but I think I can send it to someone through messages
What am I doing wrong and how do I get my phone back?
Any help would be hugely appreciated, and keep in mind Im a bit of a noob so set by step instructions would be awesome, Thanks guys
Update: the original .img files i used were apparently already rooted, so I am now extracting the 2.20.40.90 firmware from the official Asus site and I will try to flash with those.
but I cant find the system.img inside the UL-Z00A-WW-2.20.40.90-user.zip and was wondering, do I need to take out the Boot.img. droidboot.img and recovery.img then turn all the existing files into a system.img?
Hi, thank you for using XDA Assist. Try asking in your device's specific forum here, http://forum.xda-developers.com/zenfone2 They are the experts on your device. I would start by posting in this thread, http://forum.xda-developers.com/zenfone2/help/help-post-questions-instead-making-t2997779
jd1639 said:
Hi, thank you for using XDA Assist. Try asking in your device's specific forum here, http://forum.xda-developers.com/zenfone2 They are the experts on your device. I would start by posting in this thread, http://forum.xda-developers.com/zenfone2/help/help-post-questions-instead-making-t2997779
Click to expand...
Click to collapse
Ahh thank you, sorry I didnt really know where to post the question
Fixed my phone!!
Ok guys, so I figured out what I was doing wrong.
I preformed the flash correctly with pre-rooted system.img, but I didnt wipe the cache, as soon as I did, my phone booted to a normal rooted device!!
If you want to do this yourself, download pre rooted versins of these files (easy to find with a quick google search)
Recovery.img
Boot.img
Droidboot.img
System.img
ADB tethered launcher (not needed if your phone can enter recovery mode)
and place them all in a new folder (lets call it zenUnbrick)
Boot your zenfone 2 into fast boot mode, then connect it to your pc
(Hold volume up button and power button, when your phone vibrates let go of the power button and continue to hold the volume + button until you see the fastboot screen)
Now hold down shift + right click inside the zenunbrick folder and select 'open command window here'
When that opens, run these commands in this order. Wait till each one finishes and be aware that the (fastboot flash system system.img) command takes quite a while to work its magic, so be patient and dont turn off your phone
fastboot flash fastboot droidboot.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
fastboot reboot
when your phone reboots, it will most likely still seem bricked, but do not despair!! this is where you open up the ADB tethered launcher, although if your phone can enter recovery mode then you dont need this program
Option 1 - If your phone can enter recovery mode
Boot your phone into fastboot mode
use volume up and down to select recovery mode and use power button to select
wait for your phone to reboot
when you see the broken android symbol, press volume up button and power button simultaneously
select wipe cache and wait (it takes a while)
select reboot now
Your phone is now unbricked and rooted!!
Option 2 - If your phone cant enter recovery mode
Boot your phone into fastboot mode and connect it to your pc
open ADB tethered launcher
type 'ACCEPT'
when it loads type 'T4'
wait for your phone to reboot
select wipe cache and wait (it takes a while)
Select reboot now
Your phone is now unbricked and rooted!!
I have an Honor 6 L02. After i used the honor 6 multitool to flash my CWM recovery back in to stock, i did not get the recovery screen when i pressed down the buttons, nor when i downloaded an app that would do that for me, also my OTA updates fails, i thought rooting was the problem so i unrooted, now Freedom stopped working so i cant use google play and youtube. PLEASE HELP!
also my phone was rooted so i unroot it
Please help
come on guys please
for the rooted phones you can try "Quick boot" from Google play store. It has option to "Boot into recovery"...
can you also try to send CWM again via Multitool and to see if you can get into CWM?
Bill Cui said:
I have an Honor 6 L02. After i used the honor 6 multitool to flash my CWM recovery back in to stock, i did not get the recovery screen when i pressed down the buttons, nor when i downloaded an app that would do that for me, also my OTA updates fails, i thought rooting was the problem so i unrooted, now Freedom stopped working so i cant use google play and youtube. PLEASE HELP!
Click to expand...
Click to collapse
Don't freak out. Stay calm...
Follow the steps:
Installing ADB / Fastboot and Necessary Drivers
Download 15 Seconds ADB and Fastboot Drivers. Visit the official XDA forum for download and installation instructions.
Install Fastboot drivers by downloading and installing Huawei HiSuite via this link.
Installing Custom Recovery
Ensure that you have successfully installed all necessary tools and drivers mentioned above.
Download the CWM recovery image according to your EMUI version. See this XDA Thread for download links.
Power off your device. While holding Volume Down button use a USB cable to attach your device to computer. Device will automatically boot to fastboot mode.
Open Command Prompt in the directory where you have extracted/downloaded the files by holding Shift and Right Mouse Button and finally click Open Command Prompt window here in the context menu.
Now execute the following command one at a time (replace recovery name with the one you downloaded);
Code:
fastboot flash recovery [I]recovery_name.img[/I]
fastboot reboot
Ta Da!!!
mfbcool said:
Don't freak out. Stay calm...
Follow the steps:
Installing ADB / Fastboot and Necessary Drivers
Download 15 Seconds ADB and Fastboot Drivers. Visit the official XDA forum for download and installation instructions.
Install Fastboot drivers by downloading and installing Huawei HiSuite via this link.
Installing Custom Recovery
Ensure that you have successfully installed all necessary tools and drivers mentioned above.
Download the CWM recovery image according to your EMUI version. See this XDA Thread for download links.
Power off your device. While holding Volume Down button use a USB cable to attach your device to computer. Device will automatically boot to fastboot mode.
Open Command Prompt in the directory where you have extracted/downloaded the files by holding Shift and Right Mouse Button and finally click Open Command Prompt window here in the context menu.
Now execute the following command one at a time (replace recovery name with the one you downloaded);
Code:
fastboot flash recovery [I]recovery_name.img[/I]
fastboot reboot
Ta Da!!!
Click to expand...
Click to collapse
Thank you, i did successfully flash the recovery, but i still cannot boot in to recovery mode, and now i cant turn my phone off because it will reboot by itself
Bill Cui said:
Thank you, i did successfully flash the recovery, but i still cannot boot in to recovery mode, and now i cant turn my phone off because it will reboot by itself
Click to expand...
Click to collapse
Does it reboot when you try to enter recovery or it restarts itself at boot process i.e honor boot animation shows up and then it restarts (bootloop).
I really don't know why you are still unable to boot to recovery. Were you able to boot to stock recovery before flashing custom? Also, is your bootloader unlocked?
Your best bet at this stage would be to flash stock recovery and then completely flash stock ROM. This would wipe your data but will resurrect your device from bootloop.
---------- Post added at 11:47 AM ---------- Previous post was at 11:42 AM ----------
You mentioned a warez app in your original post OP. Please note that any mentioning or discussion of such apps violates XDA's code of conduct and terms. Be careful in future
okay i feel i was forced to upgrade to android 6.0 and now i need to get twrp and root again, any guides ?
I have adb on my windows 10 computer now but it does not recognize my oneplus one, any help on that would get me going again.
okay i am now able to flash twrp but it didnt replace the recovery
Enable developer's options and checkout update cyanogen recovery and enable usb debugging and connect to pc
In cmd
adb devices
One pop up seen in phone click√ and ok
adb reboot bootloader
Phone in fastboot mode
fastboot flash recovery twrp.img
After flash recovery don't reboot switch off your phone and reboot to recovery by pressing power button and volume down simultaneously and you will enter twrp do a backup then do whatever you want.
yay it worked i have twrp now
lets see if i can install superSU
edit: yay it all worked, you are the man
Rooting Guide for Doogee Y6-
So waiting time IS Now Finished , twrp is here,
Basic spec-
Ram - 2GB/4GB
Rom- 16GB/64GB
Camera- BACK- 13MP
FRONT- 8MP
Display- 5.5 INCH
OS -MARSHMALLOW
SoC -Mediatek MT6750
Hit Thanks if This Helpful For you:good:
Full Review Checkout HERE
Disclaimer
Code:
your Device At Least 50-60% Charge During Process
warranty Is now Void, Developers and We are Not Responsible For any Damage,
Backup your Personal Data and apps Before Doing anything
take a Nandroid Backup if possible
twrp Installation-
in Short-
Download twrp Sp Flash tools from Bellow Link
Install All Drivers On PC and Run SP tools
Load Scatter File and Check Recovery only
under recovery Section Load Downloaded twrp.img File
Then Click on Download, Connect your Phone to PC [make Sure Phone IS turned off]
Done,
Fastboot Guide-
Bootloader Must be Unlocked,
Code:
Code:
fastboot flash recovery recovery name.img
Rooting Guide-
Download Supersu.zip from Bellow and put into Root Of Sd Card
Boot Device into twrp [use command adb reboot bootloader] or hold power and volume up key on switch of mod
Allow Modification
make a nandroid backup
Click install Zip from sd crad
Locate Downloaded Supersu.zip file and Swipe to install
after Success go back and reboot system now
Done,
Downloads-
mod edit - blog links removed
Phone for stock on bootloop
Phone got stock on bootloop
Please, what can I do,my Doogee y6 could not boot properly again after flashing the above recovery image using sp flash tool.The device can boot into twrp recovery but can't boot back into the. If I flash I new custom ROM Will it be successful as when I Intend to restore in to factory setting, I got ' failed to Mount ' /nvcfg' in valid argument and then done afterwards. Kindly advice me on what to do please. Thank you.
TWRP language
I have question , i flushed twrp from uplink and now my twrp is not in english it is blody chinees language as it is not touch version of twrp....
any solution for this stuff... is it posible to flash maybe some other recovery so it gets english atleast ???
garabadz said:
I have question , i flushed twrp from uplink and now my twrp is not in english it is blody chinees language as it is not touch version of twrp....
any solution for this stuff... is it posible to flash maybe some other recovery so it gets english atleast ???
Click to expand...
Click to collapse
flash this one:
https://forum.xda-developers.com/showpost.php?p=69800037&postcount=3
it's the newest TWRP recovery for Y6 around
I guess you'll be ok
You don't "need" to root
...
chillo71 said:
flash this one:
https://forum.xda-developers.com/showpost.php?p=69800037&postcount=3
it's the newest TWRP recovery for Y6 around
I guess you'll be ok
You don't "need" to root
Click to expand...
Click to collapse
thx dude , but still only chinese 8 lines in old school look maybe i am not doing it well.. i do flash it all good with sptools
how do you enter to twrp?
garabadz said:
thx dude , but still only chinese 8 lines in old school look maybe i am not doing it well.. i do flash it all good with sptools
how do you enter to twrp?
Click to expand...
Click to collapse
oh now I got it, i think you go in the boot menu, all mediateks have that in Chinese
To get into recovery you must press up volume and then hold it along with pressing the power button,
Y6 after a few seconds turn;s on and you then have to chose which mode to go. Up volume to change selection and down volume to select, recovery mode obviously
chillo71 said:
oh now I got it, i think you go in the boot menu, all mediateks have that in Chinese
To get into recovery you must press up volume and then hold it along with pressing the power button,
Y6 after a few seconds turn;s on and you then have to chose which mode to go. Up volume to change selection and down volume to select, recovery mode obviously
Click to expand...
Click to collapse
after doing that i have =killed= android lieing on screen with red triangle.... under it it says =No command=
---------- Post added at 05:28 PM ---------- Previous post was at 04:58 PM ----------
So for new guys in this i skipped very important step when flashed twrp:
Do not run system , but to bootloader first , accept modifications and whoala...
thx @chillo for responding quickly
BTW The dying android means no custom recovery is installed for Y6 , no fastboot command whatsoever
And yes, Y6 and most new android phones from Marshmallow and newer *(edit: ) stock ROMs, don't like to mess with their system partition, one should select system as read-only
Glad you made it through and learned a bit of it
Bootloop
It appears I've soft-bricked my Y6.
I've installed TWRP 3.03 as above and can boot into it but when I try to do a normal reboot I'm stuck in a boot loop.
How do I get to this stage - "Do not run system , but to bootloader first , accept modifications and whoala..." Is that when you first run TWRP?
In the Mount section of TWRP "System" is not ticked but the button "Mount as readonly" is.
If I select Fastboot it hangs. Normal boot hangs. Boot into Recovery is fine.
Any suggestions?
Thanks in advance
Y6 Max:*install recovery with fastboot in Ubuntu Linux
Hello,
thank you for this very useful thread. Just want to add some information on installing the recovery image on the Doogee Y6 Max via fastboot in Ubuntu Linux
I've followed this instructions with some minor (but important)*changes.
First useful information:*to enter in the fastboot mode of the Y6 max do the follow:
- power off your phone
- push togheter Volume up and Power button
now you will see a menu with three options. Move the arrow with Volume up and select "fastboot". Then press Volume down.
You are now in fastboot mode.
Connect your phone via USB to the computer.
Open a terminal and:
- unlock OEM as described in the tutorial linked above.
- install your recovery.img as described in the tutorial linked above
- re-lock the OEM with this command:
Code:
sudo fastboot oem lock
otherwise your phone won't boot.
Then power off your phone and enter in the menu described above pressing toghether Volume up and Power.
Now select "Recovery" and you are done.
Hi! I did everything like in the tutorial but phone is stuck in bootloop after flashing supersu from sd card. Any advices?
I tried 3.0.3 twrp and newest supersu. Phone turned on but there is not root, also there were no errors during instalation.
Hello Guys
this is my first threads
my english is not good so if you have any questions pls ask in hindi if possible
here i present TWRP RECOVERY FOR MICROMAX INFINITY PRO HS3
STEPS TO FLASH
1- UNLOCK BOOT LOADER
POWER OFF THE PHONE
BATTERY AT LEAST 60%
PRESS AND HOLD POWER KEY AND VOLUME UP
IT ASK YOU ---VOLUME UP-RECOVERY
VOLUME DOWN-FASTBOOT
PRESS VOLUME DOWN AND ITS BOOT INTO FASTBOOT MODE THEN
OPEN ADB AND FASTBOOT FOLDER
ON KEYBOARD PRESS SHIFT AND MOUSE RIGHT CLICK TOGETHER
NOW GO TO OPEN COMMAND WINDOW HERE OPTION
fastboot flashing unlock
or
fastboot oem unlock-go{UNLOCKING BOOTLOADER YOU LOST YOUR HOLE DATA SO FIRST BACKUP YOUR DATA}
2- AFTER UNLOCK ITS TAKE 5-10 MIN TO BOOT {ALERT----XDA AND IM NOT RESPONCIBLE FOR ANY KIND OF DAMAGE YOUR DEVICE SO BE CARE AND BACKUP YOUR DATA}
3-FLASH RECOVERY
fastboot flash recovery recovery.img
4-THEN REBOOT
fastboot reboot
*******WHEN YOU FLASH RECOVERY AND REBOOT WITH CMD {fastboot reboot} ENTER THEN PRESS VOLUME TO GO TWRP AND IN TWRP PRESS REBOOT***********
DOWNLOAD LINK
FASTBOOT FOLDER
[url]http://www.mediafire.com/file/gdd94yv78wen99m/fastboot_folder.zip[/URL]
HS3 RECOVERY
http://www.mediafire.com/file/bfx3cu8un6h9fkl/hs3recovery.img
SUPER SU
http://www.mediafire.com/file/n8uw77pm0v4ru8x/SuperSU-v2.82-201705271822.zip
SUPER SU FLASHING
COPY SUPER SU ZIP IN YOUR INTERNAL STORAGE
SWITCH OFF HS3 AND REBOOT IN RECOVERY WITH VOLUME UP
TAP INSTALL
AND ISNTALL SUPER SU
:victory::victory::victory:ROOT:victory::victory:
vedio link
MOD Edit -Links Removed
recovery not working...could you mail at [email protected]
i want to install oreo updates in micromax infinity but i didn't get rom
can i install rom of anyother android in my phone
please reply me ........
neeraj sharma.... said:
i want to install oreo updates in micromax infinity but i didn't get rom
can i install rom of anyother android in my phone
please reply me ........
Click to expand...
Click to collapse
sorry for late reply
dont try anyother rom untill it ported for this device
Thanks
Thanks
Will this work on any phone?