I just flashed many different versions of TWRP downloaded from their site(I got only the ones compatible with my P5100). After successfully flashing them all through Odin, I can't boot into recovery. The TWRP logo screen is shown and after 2 seconds the device reboots. I followed many guides, and they were all similar in this particular process. Am I missing something, or could there be anything wrong with my unit?
light401 said:
I just flashed many different versions of TWRP downloaded from their site(I got only the ones compatible with my P5100). After successfully flashing them all through Odin, I can't boot into recovery. The TWRP logo screen is shown and after 2 seconds the device reboots. I followed many guides, and they were all similar in this particular process. Am I missing something, or could there be anything wrong with my unit?
Click to expand...
Click to collapse
did you also installed a rom??
No. I'm running the stock rom, no root. I just wanted to get the twrp installed because I need to copy my personal files to an sd card. My stock rom is rebooting itself after completing the normal system startup. I can barely open any app. So I need to backup my files and do a factory reset. Any ideas? Thanks!
I think you need to get rid of TWRP and root the stock ROM, then flash TWRP using an app running on your tablet. Do not use a PC to flash the recovery. Also, if you are installing a zip, you must do it on the device, not through your PC.
Ka-B00M said:
I think you need to get rid of TWRP and root the stock ROM, then flash TWRP using an app running on your tablet. Do not use a PC to flash the recovery. Also, if you are installing a zip, you must do it on the device, not through your PC.
Click to expand...
Click to collapse
That doesn't make sense. Odin exists for the exact purpose of flashing through a PC, in case your recovery or anything gets damaged.
Related
Hi guys!
Yesterday I successfully rooted my NS (it is a European SLCD model with stock 2.3.6 on it) following the newest guide on nexusshacks.com. So I ended up with TWRP recovery.
Then I thought the easiest to install CM is via Rom Manager. Therefore I had to change recovery for CWM. (I flashed the latest one.)
And here comes my question: why am I unable to flash CM?
First I tried it in Rom Manager, after wiping everything and rebooting system nothing happens, except for a big yellow exclamation mark.
Then I downloaded the proper CM myself and I tried to do the whole process manually in recovery menu. After wiping and choosing update from SD card I get a message like the process is aborted.
I also tried with an older CWM and with other ROM.
Any suggestions?
Thanks a lot
Sent from my Nexus S using XDA App
Boot into bootloader, then flash recovery via fastboot.
fastboot flash recovery recovery.img
stock firmware will rewrite your recovery after each boot. flash recovery then flash this right after.
Follow what SEAN SAys..............He is a Master in all these , and he helped me with details to root, flash cwm, make it sticky and flash custom ROMS.
It took me 5 minutes to do all those , and Now I am switching Roms like I switch my underwears every day twice.
I must say, Sean has the best possible way which is like a finger click.
After months of flashing everything in sight on my NS4g, the device appears to have rolled over and died! It started a few days ago, when it rebooted and asked me for a password to decrypt from storage (no password has ever been set). I couldn't get past that screen, so I decided to boot into recovery (TWRP), reinstall ROM (CM10) and gapps and restore data from backup.
No go. It just kept rebooting into recovery. But I was able to connect the phone to the PC and copy files from the phone but could not copy or delete files on the phone from the PC.
I used fastboot, Odin, and one-click-stock to wipe the device and install factory images, but the phone would boot no further than the red triangle-dead android.
Is my phone dead? I searched the forums and couldn't find any solutions other than to do what I have already done.
ttakacs said:
After months of flashing everything in sight on my NS4g, the device appears to have rolled over and died! It started a few days ago, when it rebooted and asked me for a password to decrypt from storage (no password has ever been set). I couldn't get past that screen, so I decided to boot into recovery (TWRP), reinstall ROM (CM10) and gapps and restore data from backup.
No go. It just kept rebooting into recovery. But I was able to connect the phone to the PC and copy files from the phone but could not copy or delete files on the phone from the PC.
I used fastboot, Odin, and one-click-stock to wipe the device and install factory images, but the phone would boot no further than the red triangle-dead android.
Is my phone dead? I searched the forums and couldn't find any solutions other than to do what I have already done.
Click to expand...
Click to collapse
When you flashed to stock you erased your recovery.. Reconnect to your computer and push a recovery onto your phone and you're good to go..
Unfortunately, when I flashed TWRP and boot.img to the phone using fastboot and attempted to boot into recovery, bootloader reports "No Boot or Recovery Img."
ttakacs said:
Unfortunately, when I flashed TWRP and boot.img to the phone using fastboot and attempted to boot into recovery, bootloader reports "No Boot or Recovery Img."
Click to expand...
Click to collapse
Try the Nexus tool kit and from the bootloader (power and vol. up) select flash to stock (bricked) then in advanced boot temporary recovery to flash the recovery of your choice.. or push a boot image.
Setting.Out said:
Try the Nexus tool kit and from the bootloader (power and vol. up) select flash to stock (bricked) then in advanced boot temporary recovery to flash the recovery of your choice.. or push a boot image.
Click to expand...
Click to collapse
Wish I had better news but ... using the Nexus tool kit I was able to boot into TWRP but when trying to flash CM10 and gapps for this phone the flash failed; likewise, I could not flash CM10 and gapps by pushing the files from the PC to the phone. I first did flash to stock (bricked) but that brought me back to the red triangle, dead android.
I am beginning to suspect that the phone internal sdcard is corrupted ... is there a way to test for that?
ttakacs said:
Wish I had better news but ... using the Nexus tool kit I was able to boot into TWRP but when trying to flash CM10 and gapps for this phone the flash failed; likewise, I could not flash CM10 and gapps by pushing the files from the PC to the phone. I first did flash to stock (bricked) but that brought me back to the red triangle, dead android.
I am beginning to suspect that the phone internal sdcard is corrupted ... is there a way to test for that?
Click to expand...
Click to collapse
When you got it to flash to stock did it boot up fully?
Remember that flashing to stock removes custom recoveries and you will need to flash one
Sent from my Nexus S using xda premium
Setting.Out said:
When you got it to flash to stock did it boot up fully?
Remember that flashing to stock removes custom recoveries and you will need to flash one
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
No, the phone never did boot up fully. It got to the Google screen with the unlock icon and then to the red triangle, dead Android.
ttakacs said:
No, the phone never did boot up fully. It got to the Google screen with the unlock icon and then to the red triangle, dead Android.
Click to expand...
Click to collapse
This happened when you tried stock or custom?..
Did it fully boot on stock image?..
The dead android usually shows up when you attempt to boot into recovery and you don't have one... If you try to boot and you loop back to the dead android it usually means you don't have a rom...
Try again to flash to stock, use the toolkit to boot a temporary recovery and flash a custom recovery.. Then make sure you are flashing the correct rom and correct gapps for that rom and for your phone.
Setting.Out said:
This happened when you tried stock or custom?..
Did it fully boot on stock image?..
The dead android usually shows up when you attempt to boot into recovery and you don't have one... If you try to boot and you loop back to the dead android it usually means you don't have a rom...
Try again to flash to stock, use the toolkit to boot a temporary recovery and flash a custom recovery.. Then make sure you are flashing the correct rom and correct gapps for that rom and for your phone.
Click to expand...
Click to collapse
I know have a recovery because the tool kit booted into TWRP; furthermore, the tool kit installed a TWRP 2.3 image (prior to installing the tool kit I was on 2.5 so the tool kit did something). From there, I tried to flash CM10 and gapps in the sdcard/download folder, but that failed, with TWRP returning message similar to "error opening ZIP".
I have used Odin to flash the stock image and it did not fully boot, ending at the dead android. Same results for flashing the stock image using fastboot with the phone connected to the PC. Same results with using the Nexus tool kit to flash a stock image (first JB and then, when that didn't boot, ICS). And, after the toolkit booted into temporary recovery (TWRP), I tried to flash (in this order) CM10 plus gapps, JB stock, and ICS, each time with the same results (no full boot, dead android).
I am with you when you say that the dead android means there is no rom, because my efforts to flash any rom, whether stock or custom, don't do anything. To all appearance, the phone contains a bootloader and a recovery and nothing else.
Thanks for your persistence ... any ideas for something else to try?
ttakacs said:
I know have a recovery because the tool kit booted into TWRP; furthermore, the tool kit installed a TWRP 2.3 image (prior to installing the tool kit I was on 2.5 so the tool kit did something). From there, I tried to flash CM10 and gapps in the sdcard/download folder, but that failed, with TWRP returning message similar to "error opening ZIP".
I have used Odin to flash the stock image and it did not fully boot, ending at the dead android. Same results for flashing the stock image using fastboot with the phone connected to the PC. Same results with using the Nexus tool kit to flash a stock image (first JB and then, when that didn't boot, ICS). And, after the toolkit booted into temporary recovery (TWRP), I tried to flash (in this order) CM10 plus gapps, JB stock, and ICS, each time with the same results (no full boot, dead android).
I am with you when you say that the dead android means there is no rom, because my efforts to flash any rom, whether stock or custom, don't do anything. To all appearance, the phone contains a bootloader and a recovery and nothing else.
Thanks for your persistence ... any ideas for something else to try?
Click to expand...
Click to collapse
I'm at a loss.. Try again, maybe there's something missing.. And flash only one at a time and see if it worked (just ROM then reboot) then wipe d+c and flash gapps reboot then wipe flash... Ect... Ect...
Sent from my Nexus S using xda premium
Setting.Out said:
I'm at a loss.. Try again, maybe there's something missing.. And flash only one at a time and see if it worked (just ROM then reboot) then wipe d+c and flash gapps reboot then wipe flash... Ect... Ect...
Click to expand...
Click to collapse
I am too. Every method known to me (Odin, fastboot, adb) to flash a ROM, whether custom or stock, has failed to boot. Thanks for hanging with me on this; if you can think of solution I'll be glad to have it. Or if I solve it, I'll post here.
So, last night I was updating my phone to a newer version of Paranoid Android. In the process, I accidentally flashed TWRP over my preexisting flash of CWM and, in both being unfamiliar with TWRP, and an apparent conflict between the flashes, it soft bricked my phone. Most of my day has been spent recovering my phone.
I was able to restore my phone to stock using the excellent guide found here: http://forum.xda-developers.com/showthread.php?t=1840030
Then spent the next couple of hours installing updates, at which point I was eager to reflash my custom roms, etc.
Problem is, I can't get the phone to boot into CWM (or TWRP). Just goes to stock recovery. I've tried flashing the lazy way in ROM Manager, and in Odin (reads PASS), but it always goes to stock recovery. For that matter, in trying to flash with ROM Manager, it reads "an error occurred while trying to flash..."
Ideas?
TheBuzzard said:
So, last night I was updating my phone to a newer version of Paranoid Android. In the process, I accidentally flashed TWRP over my preexisting flash of CWM and, in both being unfamiliar with TWRP, and an apparent conflict between the flashes, it soft bricked my phone. Most of my day has been spent recovering my phone.
I was able to restore my phone to stock using the excellent guide found here: http://forum.xda-developers.com/showthread.php?t=1840030
Then spent the next couple of hours installing updates, at which point I was eager to reflash my custom roms, etc.
Problem is, I can't get the phone to boot into CWM (or TWRP). Just goes to stock recovery. I've tried flashing the lazy way in ROM Manager, and in Odin (reads PASS), but it always goes to stock recovery. For that matter, in trying to flash with ROM Manager, it reads "an error occurred while trying to flash..."
Ideas?
Click to expand...
Click to collapse
Do you want CWM or TWRP? If TWRP, you could just download GooManager from the Play Store and press Menu/Install Open Recovery Script.
For flashing either via Odin, deselect auto reboot in Odin then flash the recovery tar. Once its passed, pull the battery and boot directly into your custom recovery.
Sent from my SCH-I535 using Tapatalk 4 Beta
SlimSnoopOS said:
Do you want CWM or TWRP? If TWRP, you could just download GooManager from the Play Store and press Menu/Install Open Recovery Script.
For flashing either via Odin, deselect auto reboot in Odin then flash the recovery tar. Once its passed, pull the battery and boot directly into your custom recovery.
Sent from my SCH-I535 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Thanks for the advice, but I got it working.
Tried Odin one more time, and it's booting into CWM properly now. Not sure why it didn't "take" the other 2-3 times that I followed the identical procedure, but it appears that my problems are fixed now.
Hi guys, I flashed the latest factory image, then flashed the latest TWRP but can access it 1 out of 10 tries.. What am I doing wrong? Is it a faulty replacement phone? Never had this issue with my other nexus 5 (same recovery file but lollipop and not marshmallow) and now I have this problem.. Tried to riflashato the factory image 5 times, boot to recovery without installing but nothing changed.. Thanks in advance!
If you just just flashed TWRP, then booted into Android, then reboot into recovery.. Android will overwrite TWRP with the stock recovery.
a hammerhead wrote this.
beekay201 said:
If you just just flashed TWRP, then booted into Android, then reboot into recovery.. Android will overwrite TWRP with the stock recovery.
a hammerhead wrote this.
Click to expand...
Click to collapse
Never happened before.. How can I prevent this? Sometimes I can't even boot to twrp after flashing and not rebooting to android..
carlese said:
Never happened before.. How can I prevent this? Sometimes I can't even boot to twrp after flashing and not rebooting to android..
Click to expand...
Click to collapse
do you finde fix
slavisa037 said:
do you finde fix
Click to expand...
Click to collapse
Downloaded twrp again and used flashify..
carlese said:
Downloaded twrp again and used flashify..
Click to expand...
Click to collapse
This is not really a fix, since to use Flashify one needs to be rooted already.
What I did to work around this was reflash LMY48M. After reflashing that, fastboot correctly boots/flashes twrp.
I've read that the issue arises when trying to boot and/or flash twrp with MRA56K installed, AND the device is connected to USB.
Ok, i got some of problems here, i tryied to root my Nexus 5 with other Android 6 version, it was the first one launched after development version. Now i have MRA58K version.
Problem 1 : I have no stock recovery, i first rooted original version of Marshmallow with CWM and i soft bricked, so no backup, no factory images. Installed MRA58K and there is no stock recovery, thanks god i can use bootloader. I can install TWRP, but i want to install the old recovery, Tell me how to do it.
Problem 2: Actual version of Marshmallow ask me to install a patch, but when installing i got stuck in TWRP, it cant install it (yes, android was rooted, but i installed twrp before root, and the update were before it.)
Thanks.
You can flash a stock ROM using the flash-all file in a command prompt. This will install stock ROM with stock recovery. Make sure the phone has an unlocked bootloader and you should be fine.
Official OTA updates cannot be installed with a custom recovery.
I tryied 3 times to install OS with flash-all. All the problems start after i installed CWM and try to root the phone, but after that, i used a stock rom image that was different build than actually one.
I`m not sure yet who`s fault is.
Any ideas?
I don't recommend using CWM, only TWRP.
After you flash TWRP always boot into it, and since you're flashing a custom recovery I'm going to assume you don't care about OTA's, swipe to allow system to be mounted. TWRP will automatically patch the system to survive android trying to overwrite it. Reboot into TWRP a second time to be safe. TWRP should stick from now on until you flash over it or restore stock system partition.
Yes, now i have TWRP as recovery, but i want to replace it with stock recovery.
Problem is, when i upload stock recovery and try to boot in recovery mode, i got the green dead android with red triangle.
But after TWRP uploading and booting in recovery mode, TWRP is there..
I really don`t know what`s wrong.
Flash stock recovery, select recovery from the fastboot menu, hold the power button and press volume up button.
Today I tried to finally update to the latest version of crDroid, but ended up having a bunch of issues doing so, and after a lot of troubleshooting and trying to fix it, I ended up putting it into a bootloop of some sort instead.
I'm pretty sure the last thing I tried was installing a different version of TWRP to see if that version would let me properly install the rom, and stop my phone from always rebooting into recovery mode.
Trying to turn it on normally or boot into TWRP leaves it hanging on the "Redmi" boot screen, it can boot into fastboot mode though.
I'm guessing that the only way to recover my phone at this point is to flash the Official MIUI rom back onto the phone, but that also involves wiping Data and losing pretty much everything I've put on the phone.
I was smart enough to make a TWRP of the Data folder, but while making the backup, the console said it doesn't include all personal files or something.
How much of my personal data and files can I rescue from the phone in this state, and how can I do that before it gets wiped when fixing it?
Also, I think I really need some help in actually restoring my phone and flashing the custom rom properly.
No matter how much effort I put into figuring out how to do this stuff, unexpected issues always seem to happen, and turns something that initially seemed so simple into multiple hours of troubleshooting.
The only way I think i've gotten rom flashing to work at all was by wiping everything and installing the official MIUI rom, but I don't want to be losing my data every month when an update comes out.
So, could someone please help me get my phone working again?
Edit: I ended up fixing my own issue by ADB flashing on a different release of TWRP, and then installing fcrypt disabler after the rom but before everything else.
Sanarise said:
Today I tried to finally update to the latest version of crDroid, but ended up having a bunch of issues doing so, and after a lot of troubleshooting and trying to fix it, I ended up putting it into a bootloop of some sort instead.
I'm pretty sure the last thing I tried was installing a different version of TWRP to see if that version would let me properly install the rom, and stop my phone from always rebooting into recovery mode.
Trying to turn it on normally or boot into TWRP leaves it hanging on the "Redmi" boot screen, it can boot into fastboot mode though.
I'm guessing that the only way to recover my phone at this point is to flash the Official MIUI rom back onto the phone, but that also involves wiping Data and losing pretty much everything I've put on the phone.
I was smart enough to make a TWRP of the Data folder, but while making the backup, the console said it doesn't include all personal files or something.
How much of my personal data and files can I rescue from the phone in this state, and how can I do that before it gets wiped when fixing it?
Also, I think I really need some help in actually restoring my phone and flashing the custom rom properly.
No matter how much effort I put into figuring out how to do this stuff, unexpected issues always seem to happen, and turns something that initially seemed so simple into multiple hours of troubleshooting.
The only way I think i've gotten rom flashing to work at all was by wiping everything and installing the official MIUI rom, but I don't want to be losing my data every month when an update comes out.
So, could someone please help me get my phone working again?
Click to expand...
Click to collapse
can u boot into twrp?
if u can boot, while in twrp, connect your phone via usb cable to pc. u can copy everything on pc
Simoom Sadik said:
can u boot into twrp?
if u can boot, while in twrp, connect your phone via usb cable to pc. u can copy everything on pc
Click to expand...
Click to collapse
Unfortunately, I can't.
Trying to boot into TWRP just gets stuck on the 'Redmi' boot logo.
I just remembered that you can install TWRP over ADB, and that Peter's one says it works even when the system partition is empty, so maybe the issue is the TWRP I installed and could possibly undo this part of the issue over ADB.
It won't fix the issue preventing my from updating my rom, but recovery only is still better than a soft brick.
Edit: That worked, i've put Peter's TWRP back on, and it's launching into recovery mode/TWRP again now
twrp not boot after successfully flash in this rom
Sanarise said:
Unfortunately, I can't.
Trying to boot into TWRP just gets stuck on the 'Redmi' boot logo.
I just remembered that you can install TWRP over ADB, and that Peter's one says it works even when the system partition is empty, so maybe the issue is the TWRP I installed and could possibly undo this part of the issue over ADB.
It won't fix the issue preventing my from updating my rom, but recovery only is still better than a soft brick.
Edit: That worked, i've put Peter's TWRP back on, and it's launching into recovery mode/TWRP again now
Click to expand...
Click to collapse
flash latest twrp download from github, install twrpbuilder img twrp ,it boot fine and you will copy your data to pc and then install any other twrp img which u want , dont wipe anything from phone before phone boot.flash only original twrp builder 3.2.3.1 official,it boot only on latest updates.
Why nobody use orangefox?
is your issue solve or not tell,
Simoom Sadik said:
can u boot into twrp?
if u can boot, while in twrp, connect your phone via usb cable to pc. u can copy everything on pc
Click to expand...
Click to collapse
if your problem is not solve then tell me you need to flash a fastboot rom first with save user data.bat file and when it installed then you can install twrp builder 3.2.1. and then boot to twrp this methods working fine,if you recently flashed any android 10 rom then first you need to flash a miui fastboot rom,or flash it via command mode direct only 3 files
first click on extract a fastboot rom and copy boot system and vender file with flash.all bat file and make a new folder then click on flash.bat save user data file to flash these images
or you can do this manually
fastboot flash system system.img
fastboot flash vender vender.img
fastboot flash boot boot.img
then reboot device to fastboot again
now flash latest official twrp builder 3.2.3.1 img twrp and take all your data backup,
in fastboot flash latest miui do not downgrade direct otherwise you lost your data,
after this if you sucess then you can flash your old rom which is running before issue of boot loop of redmi logo
it will deincrypt your data safely and then root device and boot normally, if you lost anything then contact me with mail or whatsapp i will help you,7009197673 india
and this twrp work on all version from chines to global beta stable and indian stable
joke19 said:
Why nobody use orangefox?
Click to expand...
Click to collapse
In the end, I did try orangefox, and it might have been part of why it worked.
However, the crDroid installation instructions specifically mentions using Peter's TWRP, so I initially used that one.
anmoltinder said:
if your problem is not solve then tell me you need to flash a fastboot rom first with save user data.bat file and when it installed then you can install twrp builder 3.2.1. and then boot to twrp this methods working fine,if you recently flashed any android 10 rom then first you need to flash a miui fastboot rom,or flash it via command mode direct only 3 files
Click to expand...
Click to collapse
Thank you for the effort you put into typing up a guide to help me, but I ended up fixing my own problem.
I was able to use fastboot to flash on a better TWRP release, and then get the rom to install properly by installing fcrypt-disabler just after it.
Sanarise said:
Today I tried to finally update to the latest version of crDroid, but ended up having a bunch of issues doing so, and after a lot of troubleshooting and trying to fix it, I ended up putting it into a bootloop of some sort instead.
I'm pretty sure the last thing I tried was installing a different version of TWRP to see if that version would let me properly install the rom, and stop my phone from always rebooting into recovery mode.
Trying to turn it on normally or boot into TWRP leaves it hanging on the "Redmi" boot screen, it can boot into fastboot mode though.
I'm guessing that the only way to recover my phone at this point is to flash the Official MIUI rom back onto the phone, but that also involves wiping Data and losing pretty much everything I've put on the phone.
I was smart enough to make a TWRP of the Data folder, but while making the backup, the console said it doesn't include all personal files or something.
How much of my personal data and files can I rescue from the phone in this state, and how can I do that before it gets wiped when fixing it?
Also, I think I really need some help in actually restoring my phone and flashing the custom rom properly.
No matter how much effort I put into figuring out how to do this stuff, unexpected issues always seem to happen, and turns something that initially seemed so simple into multiple hours of troubleshooting.
The only way I think i've gotten rom flashing to work at all was by wiping everything and installing the official MIUI rom, but I don't want to be losing my data every month when an update comes out.
So, could someone please help me get my phone working again?
Edit: I ended up fixing my own issue by ADB flashing on a different release of TWRP, and then installing fcrypt disabler after the rom but before everything else.
Click to expand...
Click to collapse
help.I woke up yesterday and I turned on my phone and it is stuck on the Mi logo.All i can do is get it to fastboot thing.It seems like you and I have the same problem and I would love to have some help from you
Fcsubxrhi said:
help.I woke up yesterday and I turned on my phone and it is stuck on the Mi logo.All i can do is get it to fastboot thing.It seems like you and I have the same problem and I would love to have some help from you
Click to expand...
Click to collapse
If you can access fastboot, then flash TWRP.... Enter recovery, wipe your system partitions and then flash the Stock MIUI ROM or use the MiFlash tool. Make sure you aren't flashing an older version of the ROM than the onle already installed.
CongestedHangman said:
can u boot into twrp?
if u can boot, while in twrp, connect your phone via usb cable to pc. u can copy everything on pc
Click to expand...
Click to collapse
I have the same problem that stated after installing the update for derpfest and I can boot into twrp. Any solution for me?