Related
I successfully rooted my HTC Tattoo(click) and now I want to flash Cyanogenmod7. I booted to recovery (recovery from http://forum.xda-developers.com/showthread.php?t=644279), wiped Dalvik-cache and sdcard (when i wiped my sdcard, is it still a goldcard?) and did hard reset.
Then I chose "Flash zip from sdcard" and tried to flash CM7. In half of a process it always stops and reports: (Status 7) installation aborted.
Can anyone help?
ldinh said:
Thank you for your "help".
[Solution:]
Download ROM Manager from stock Browser (warez),
install ROM Manager,
flash ClockWorkMod recovery in ROM Manager,
boot into CWM recovery,
wipe,
flash CM & gapps,
reboot.
Click to expand...
Click to collapse
Even i have similar problem
Hi..even i have similar problem.
Copied cm7 and gapps *zip file onto the memory card and then entered the bootmenu(0.8.6) via android 2ndinit and wiped the data/cache and when i selected the zip files the phone is rebooting into the bootmenu and even after selecting the bootmenu to 2ndinit the same problem persists..can anybody help me..dont know what to do
plz that's really important to me! i flashed gapps and i lost google apps -> i can't install any apps from market!!
Thank you for your "help".
[Solution:]
Download ROM Manager from stock Browser (warez),
install ROM Manager,
flash ClockWorkMod recovery in ROM Manager,
boot into CWM recovery,
wipe,
flash CM & gapps,
reboot.
RE
I have the same problem. Titanium Backup says I'm rooted and I'm just fine but when I hit fix permissions in rom manager I get this warning "error running privileged" commands.. And when I try to flash CWM I get an unexpected error or something :S .. What the heck?
Hello,
1st.: while starting this new thread, I looked through the automaticly generated similar threads and found non that was suiting my problem.
Last night I unlocked the bootloader of my wifes Xperia L (C2105) and got stuck into an boot loop. After this I had the need to flash an original rom (4.1.2). This results in an total wipe of the phone :crying:
Now the phone has an unlocked bootloader and an old Android Version. I want to install the pacman rom 4.4.4. I know i have to use cwm or twrp to do this, but do I need to root the device?
I'm a little bit confused. I thought installing the *.img-File from TWRP, with the folloing command, will get me the recovery option an with this option
Code:
c:\fastboot\Fastboot.exe flash boot C:\fastboot\openrecovery-twrp-2.8.4.0-taoshan.img
Can anyone help me out?
My wife is not upset, but with the boot loop from last night in my mind, I'm quit unsure what to do next.
many thanks in advanced
Felix
you need to root the device and use flashtool by androxyde(Easier and user friendly), first download the rom and put it in internal/external memory and then install thunderzap 4.12 by select bootkk.img and install it in fastboot mode in flashtool, now enter the recovery go into wipe and format options and choose clean to install a new ROM and then flash the pac rom and reboot
Root isn't necessary.
Download PAC ROM, Take boot.img inside the zip.
Flash boot.img via fastboot.
Boot into recovery, wipe data / factory reset.
Flash ROM and GApps.
That's it
NOP, you dont need to root to install a custom rom
felix leiter said:
Hello,
1st.: while starting this new thread, I looked through the automaticly generated similar threads and found non that was suiting my problem.
Last night I unlocked the bootloader of my wifes Xperia L (C2105) and got stuck into an boot loop. After this I had the need to flash an original rom (4.1.2). This results in an total wipe of the phone :crying:
Now the phone has an unlocked bootloader and an old Android Version. I want to install the pacman rom 4.4.4. I know i have to use cwm or twrp to do this, but do I need to root the device?
I'm a little bit confused. I thought installing the *.img-File from TWRP, with the folloing command, will get me the recovery option an with this option
Code:
c:\fastboot\Fastboot.exe flash boot C:\fastboot\openrecovery-twrp-2.8.4.0-taoshan.img
Can anyone help me out?
My wife is not upset, but with the boot loop from last night in my mind, I'm quit unsure what to do next.
many thanks in advanced
Felix
Click to expand...
Click to collapse
you can download the rom, extract it and keep, boot.img file, in fastboot folder, and also keep the downloaded rom zip file in sd card for later use.
than you can use use fastboot commands to flash those boot.img which will install the recovery into your phone, than .
use reboot command in fastboot, it will reboot your phone, take out your cable, using volume up key go to recovery,
there clear all the cache and delvik cache file, then, install your custom rom by selecting from your sd card, it will take a bit of time for first time, so don't worry,
than you are done,
Hi guys i was trying to install a custom rom on my mate 9 (MHA-L29C432-156)so i followed the instructions ; unlocked the bootloader; then installed twrp 3.1.0-0; on twrp formated data; then full wiped and try to install AurRom from SD; but get a message that zip file is corrupted; so I tried with S.H.I.E.L.D ROM and it flashed , but then when boot goes to eRecovery, and give me 3 options download latest version and recovery; reboot and shutdown. So now I cant boot the phone, when I restarted, followed same steps , format data, full wipe and trying to installing again but getting a message about all zip files of the roms are corrupted; then i try to restore backup; and same again get the huawei logo, then the android logo , phone restarts and eRecovery again.
Please someone HELP, I use this phone for my work...........!!!!!!!!!
How did you full wipe?
Also try with Twrp 3.0.2-2
Here:www.androidfilehost.com/?fid=745425885120697579
dannytgt said:
on twrp formated data
Click to expand...
Click to collapse
Something went wrong here. You can run 'adb logcat' to see the crash details while starting.
If you have a backup on twrp then restore to get phone working. You may need to flash the public and hw-data zips afterwards though.
If you don't have a backup then you could try flashing the C636 off line firmware and then use firmware finder to go back to your original firmware
Sent from my MHA-L09 using XDA-Developers Legacy app
you may just flash the modified recovery ( See Guide subforum ) ) to bypass the update certification and authorization and reflash an original firmware. your stored files will be lost anyway in most cases.
I would bet superuser ( shield ) and SuperSU ( Aurom) messed your boot image. Both are incompatible to each other and, afaik both are incompatible to twrp 3.1.
Flash TWRP 3.0.2.2, reboot to recovery again to change version, flash the rom ( f.e. shield rom), boot once up, reboot to recovery and THEN you may flash twrp 3.1
Thanks all of you guys, I've solved the problem, it seems that's something related to the sd card, I've formated the sd and transfer the files trough another phone and then put the sd on the mate 9, I follow the steps as followed before and works successfully, now I'm on AurRom and 182 firmware.
Those who are looking for stock 19s ROM, the g drive link is here
https://drive.google.com/uc?id=0BwU--kMdOmZiREUxUXR2eTgwX2s&export=download
How to flash?
Put the file downloaded in root directory
Boot into fastboot mode
Flash stock recovery
Now boot into TWRP recovery using following command
fastboot boot TWRP.img
Wipe Cache, dalvik cache and system.
Reboot to recovery
Now you will be in stock recovery
Update from here.
First boot might take time.
Is it possible to flash this with twrp?
Sent from my X520 using Tapatalk
lak2004mi said:
Is it possible to flash this with twrp?
Sent from my X520 using Tapatalk
Click to expand...
Click to collapse
No only via stock recovery
djdeve said:
Those who are looking for stock 19s ROM, the g drive link is here
https://drive.google.com/uc?id=0BwU--kMdOmZiREUxUXR2eTgwX2s&export=download
How to flash?
Put the file downloaded in root directory
Boot into fastboot mode
Flash stock recovery
Now boot into TWRP recovery using following command
fastboot boot TWRP.img
Wipe Cache, dalvik cache and system.
Reboot to recovery
Now you will be in stock recovery
Update from here.
First boot might take time.
Click to expand...
Click to collapse
if i flash stock recovery thn if i try to boot into recovery thn phone will open in stock recovery only thn hw cn i flash?
cjcool_123 said:
if i flash stock recovery thn if i try to boot into recovery thn phone will open in stock recovery only thn hw cn i flash?
Click to expand...
Click to collapse
True..
Use Chinese twrp and flash .. Works for me and many others .. Ensure to flash no verity zip post flashing
Or do changes in updater script and repack the zip
cjcool_123 said:
if i flash stock recovery thn if i try to boot into recovery thn phone will open in stock recovery only thn hw cn i flash?
Click to expand...
Click to collapse
After flashing stock recovery don't reboot you phone in stock recovery, bcoz you can't wipe system in stock recovery to do so ,
Reboot your phone into fastboot mode by pressing vol down and power button and connect your phone to PC and from CMD prompt run the following command
Fastboot boot twrp.img
Actually my phone was bootlooped when i tried installing twrp img of chinese version and im unable to flash ROM. Before this i used latest twrp and flashed RR and lineage OS. Volte worked fine in both the roms and in stock rom too. After this happened i installed AIO tool kit and flashed chinese twrp again. Then done flashing with lineage OS there the volte is broken. I thought it would be some software error and i tried flashing RR and found the same broken volte! Can anyone help me out in enabling volte in my le eco le2 (s2) x526.
Bootloader and Modem S2
Try flashing 19s bootloader and modem from here
https://host.llamasweet.tech/codeworkx/lineage/s2/
Thankx @codeworkx for this.
one more link for stock 19s rom
https://drive.google.com/file/d/1BgXejpbVug4KR5Mc6-eFWom6gVR96UhK/view?usp=drivesdk
custom to stock rom
if we are in custom rom and we have to go back for stock rom with stock recovery will it work by just copying the zip file into the phone and rename into update.zip
And then clicking on update will it work Guys ??
error while installing This package is for "le_s2_ww" devices;this is a "s2'.
bootloop
I tried to install the stock ROM provided by 2 ways :-
1) booting into previous version of twrp using fastboot commands and then the regular install after wiping required files.
2) Renaming it to update.zip and placing it into sdcard then via stock recovery.
it gets installed every time without any error but gets into boot loop with both steps.
Is there any way to get completely stock again ?
akakumar said:
I tried to install the stock ROM provided by 2 ways :-
1) booting into previous version of twrp using fastboot commands and then the regular install after wiping required files.
2) Renaming it to update.zip and placing it into sdcard then via stock recovery.
it gets installed every time without any error but gets into boot loop with both steps.
Is there any way to get completely stock again ?
Click to expand...
Click to collapse
Flash twrp via following toolkit .beacause only this recovery works to flash stock roms
https://forum.xda-developers.com/devdb/project/?id=16391#downloads
Open twrp do factory reset and wipe data , cache , dalvik cache . Dont wipe system . Then flash the rom . Dont flash magisk or any root app . Reboot . You got a notification from twrp that replace stock recovery . Dont replace recovery . Once rom boot setup everything .now bootloader is locked and twrp replaced via stock recovery .
Deepjashan said:
Flash twrp via following toolkit .beacause only this recovery works to flash stock roms
https://forum.xda-developers.com/devdb/project/?id=16391#downloads
Open twrp do factory reset and wipe data , cache , dalvik cache . Dont wipe system . Then flash the rom . Dont flash magisk or any root app . Reboot . You got a notification from twrp that replace stock recovery . Dont replace recovery . Once rom boot setup everything .now bootloader is locked and twrp replaced via stock recovery .
Click to expand...
Click to collapse
Hard Luck !!
its been more than half an hour and still at the same boot loop. the installation was successful as well , screenshot attached below.
PS: Ignore the cracked screen.
akakumar said:
Hard Luck !!
its been more than half an hour and still at the same boot loop. the installation was successful as well , screenshot attached below.
PS: Ignore the cracked screen.
Click to expand...
Click to collapse
I use this mathod everytime when i need stock rom. It works for me
my phone caps my speed to 4 Mbps after few minutes. It's not a isp or router based problem.
Actually I faced this problem after I flashed back to Eui 19s from 21s.
akakumar said:
I tried to install the stock ROM provided by 2 ways :-
1) booting into previous version of twrp using fastboot commands and then the regular install after wiping required files.
2) Renaming it to update.zip and placing it into sdcard then via stock recovery.
it gets installed every time without any error but gets into boot loop with both steps.
Is there any way to get completely stock again ?
Click to expand...
Click to collapse
Deepjashan said:
Flash twrp via following toolkit .beacause only this recovery works to flash stock roms
https://forum.xda-developers.com/devdb/project/?id=16391#downloads
Open twrp do factory reset and wipe data , cache , dalvik cache . Dont wipe system . Then flash the rom . Dont flash magisk or any root app . Reboot . You got a notification from twrp that replace stock recovery . Dont replace recovery . Once rom boot setup everything .now bootloader is locked and twrp replaced via stock recovery .
Click to expand...
Click to collapse
Alright I found a way ...I read it in some other discussion on le2 .
The step by step procedure to get stock back is listed :-
1) As usual reboot to recovery
2) wipe cache, dalvik, system and data
3)install the stock ROM
Now when you reboot you will get stuck into boot loop at the leeco logo.... wait for 5 mins and test your luck if it works otherwise follow next
4) go back to recovery by pressing vol up and power button.
5) install Andromodx kernel
Reboot and voila you have it running.
Also you can flash the stock recovery and lock OEM by fastboot commands
The only issues I have right now are two
1) the display scale is set to zoom and even if I set it to standard it reboots but doesn't change. I scaled down pixel density by adb commands but still its weird at some places
2) it crashes a lot ... sometimes when I press home or multitasking button it just goes black and EUI reboots. I also did a factory reset but no use.
If anyone can help me in that ....:laugh:
flash
djdeve said:
No only via stock recovery
Click to expand...
Click to collapse
give complted process for flash stock rom to letv le 2 x526
Error while flashing
Error while installing This package is for "le_s2_ww" devices;this is a "s2'.
Can you do something about it ?
akakumar said:
Hard Luck !!
its been more than half an hour and still at the same boot loop. the installation was successful as well , screenshot attached below.
PS: Ignore the cracked screen.
Click to expand...
Click to collapse
Just figured this out with the help of another post on a separate thread.
It seems that the latest twrp for x526 (v 3.2.1.0) has a bug such that when you format the data partition - it writes a wrong partition size.
This causes the boot loop with the stock ROM (other custom ROMs seems to be happy living with the error).
An associated side effect of the wrong partition size is that you wont be able to encrypt your phone on the custom ROM (the encryption process simply causes the phone to reboot without doing anything).
To resolve this, downgrade twrp to v 3.0.2. Then format cache/system/data.
Then mount the phone to your PC (enable MTP) and copy the stock ROM of your choice.
You need to update the "updater-script" and comment out the version check - and then you can install the stock ROM using twrp.
This worked for me.
Hope it works for you as well.
PS: Once you install the stock ROM, the data partition gets encrypted and first boot takes a lot of time.
Be patient and also know that twrp will no longer be able to decrypt your data partition (I think either twrp is broken OR the stock ROM uses some other default password to encrypt the data partition and hence decryption fails. I have tried using my screen lock PIN and it doesn't work and "default_password" does not work either.
All the best.
---------- Post added at 06:56 AM ---------- Previous post was at 06:52 AM ----------
satyamsahu366 said:
Error while installing This package is for "le_s2_ww" devices;this is a "s2'.
Can you do something about it ?
Click to expand...
Click to collapse
Open the update.zip file on your PC and navigate to META-INF/com/google/android.
You will find a file by the name updater-script.
Use your favourite text editor to open this file and then find the following line:
get_device_compatible("le_s2_ww") == "OK" || abort("This package is for "le_s2_ww" devices; this is a "" + getprop("ro.product.device") + "".");
Insert a # at the beginning of the line to get the installer to ignore the version mismatch and you should be good to go.
It should now look like this:
#get_device_compatible("le_s2_ww") == "OK" || abort("This package is for "le_s2_ww" devices; this is a "" + getprop("ro.product.device") + "".");
Now save this file and update the zip file / create a zip file again and then proceed with the installation as usual.
Hello everyone,
First of all, rom and recovery are not from me... I just want to make a full guide to help you
So let's go !!!!!
1 step: unlock bootloader
https://en.miui.com/unlock/
BE CAREFUL unlocking your bootloader will erase all your data (internal storage) so don't forget to make a backup
2 step: flash twrp recovery
Download the recovery image from here
https://drive.google.com/file/d/1-1CSfT4lQwFZngu6RI9eowLA9CmEMEPw/view?usp=drivesdk
Be sure to have adb and fastboot tools on your computer ... If not take a look at here
https://forum.xda-developers.com/showthread.php?t=2317790
Past TWRP_umi.img on minimal adb and fastboot directory.
Open a cmd here.
Enable usb debugging on your device
Reboot your phone on bootloader (hold volume down + power), connect it to PC and tape:
fastboot devices
fastboot flash recovery TWRP_umi.img
Then tape fastboot reboot while holding volume up button on your devices to reboot in recovery
3 step:
At the first launch of Twrp You have to choose SWIPE TO ALLOW MODIFICATION
4 step:
THIS ONE OF THE MUST IMPORTANT STEP
In twrp menu you have to go in Wipe data on choose format data
Otherwise the ROM will not boot.
5 step:
Reboot into recovery from twrp.
6 step:
Connect your phone to your PC and paste the xiaomi.eu ROM of your choice (stable or Dev)
7 step:
Flash ROM from recovery
8 step:
REBOOT AND ENJOY :good::good::good:
Does Xiaomi EU Rom run either on encrypted and unencrypted storage?
I cant get this to work, ive been trying everything for hours. I am sure i am missing something stupid but if anyone has any new ideas please let me know. I unlocked my device today, flashed twrp via fastboot, rebooted to recovery, formatted data then went on to install xiaomi eu rom. Ever since trying this, i am constantly booting into recovery or hitting a boot loop. i have formatted data more times than i care to think of ha ha. ive tried flashing the latest fastboot rom via mi unlock tool to do a fresh start but keep getting ''flash crclist error". Ive also tried flashing miui stock via twrp and it also, doesn't boot. ive tried many combinations in between. My next option is to try the fastboot global rom (though i believe i have a chinese device), i am waiting for it to download. If anyone knows what i am doing wrong i will be eternally grateful if you can tell me what it is. I'm so frustrated, been flashing roms for years, never had anything take as long as this :crying:
carolef1984 said:
I cant get this to work, ive been trying everything for hours. I am sure i am missing something stupid but if anyone has any new ideas please let me know. I unlocked my device today, flashed twrp via fastboot, rebooted to recovery, formatted data then went on to install xiaomi eu rom. Ever since trying this, i am constantly booting into recovery or hitting a boot loop. i have formatted data more times than i care to think of ha ha. ive tried flashing the latest fastboot rom via mi unlock tool to do a fresh start but keep getting ''flash crclist error". Ive also tried flashing miui stock via twrp and it also, doesn't boot. ive tried many combinations in between. My next option is to try the fastboot global rom (though i believe i have a chinese device), i am waiting for it to download. If anyone knows what i am doing wrong i will be eternally grateful if you can tell me what it is. I'm so frustrated, been flashing roms for years, never had anything take as long as this :crying:
Click to expand...
Click to collapse
try rhis
format data (not wipe)
put rom.zip unto ur internal storage
wipe cache an dalvik cache
now flash the zip
now reboot to recovery
wipe cache an dalvik cache
an now go to reboot menu
an now power off
an now power it on
-fluffy- said:
try rhis
format data (not wipe)
put rom.zip unto ur internal storage
wipe cache an dalvik cache
now flash the zip
now reboot to recovery
wipe cache an dalvik cache
an now go to reboot menu
an now power off
an now power it on
Click to expand...
Click to collapse
Thank you for trying to help, unfortunately it just rebooting to my recovery still. I dont suppose anyone has any other ideas do they please I cant understand what on earth ive done wrong. Does anyone know why mi flash tool comes up with that error (flash crc list error)? qualcomm drivers are installed.
carolef1984 said:
Thank you for trying to help, unfortunately it just rebooting to my recovery still. I dont suppose anyone has any other ideas do they please I cant understand what on earth ive done wrong. Does anyone know why mi flash tool comes up with that error (flash crc list error)? qualcomm drivers are installed.
Click to expand...
Click to collapse
write what u do wen u try to flash the zip
an have u downloadet the correct zip file
Thanks everyone, i think it must have been something to do with the qualcomm drivers installed incorrectly. i have re-done that from scratch and managed to get mi flash tool working. Sorry to waste everyones time.
Greetings
I have followed the tutorials to perfection like 2-3 times and I still face the same issue
I always go back to TWRP after trying to boot into system.
I have tried 2 different recovery files
The experimental one asks for a password. and the other one works but keeps going back to recovery after flashing.
MIUI 11 rom
MIUI 12 rom
No matter what I do It keeps going back to recovery.
It's my only device so I truly need help.
I have tried re installing everything already.
At this point I just want to install stock rom and keep using it without flashing anything please help.
PHONE FINALLY REBOOTING INTO SYSTEM. I myself don't know what i did!!!
Bootloop (stuck on 5G logo) after flashing Xiaomi.eu ROM
Dear fellow XDA-dev community members,
Xiaomi Mi 10 (umi), coming from original stock ROM, MIUI 11 GLOBAL version V11.0.2.0.QJBMIXM.
Bootloader unlocked official way via MiFlash Unlock 4.5.514.47.
Custom recovery TWRP 3.4.1b-0313 installed via XiaoMiTool V2.
Tested root by installing Magisk 20.3 via TWRP, no problem, then updating to Magisk 20.4 with the Magisk Manager 7.5.1.
The problems started when I tried to install Xiaomi.eu Custom ROM : xiaomi.eu_multi_MI10_V11.0.25.0.QJBCNXM_v11-10
Downloaded the Xiaomi.eu ROM to PC, then copied to the Download folder of the Phone.
Started phone in upload mode or TWRP. > Wipe > Swipe to Factory Reset + Format Data.
When formatting data I erase all folders in the phone, including the Xiaomi.eu ROM copied in the Download folder.
Some tutorials suggest to copy the Xiaomi.eu ROM from PC to phone after formatting the data, just by connecting the phone in TWRP to the PC, by going to > Mount and enabling MTP.
Tried this method but when I send the Xiaomi.eu ROM file to the phone the progress bas doesn’t move.
So I restarted the phone, without installing the Custom ROM, went through all the screens of initial phone configuration. Lost Magisk and root (but I supposed that it’s not mandatory to install Custom ROM). Copied again the Xiaomi.eu ROM zip file to the Download folder. Rebooted to TWRP. This time I just did Factory Reset but without Format Data. Then > Install to install the Xiaomi.eu new ROM. Cleared Dalvik Cache then reboot.
PROBLEM : bootloop. Stuck with the 5G logo forever, waited more than 30 min, no change.
Still have access to recovery TWRP and to bootloader mode. I suppose this is a soft brick?
I did > Wipe, Swipe to Factory Reset + Format Data, restarted… no change.
Copied this time the Xiaomi.eu ROM to a clean formatted (FAT32) USB drive. As shown in some tutorials, you can us an external USB drive via USB OTG to install the Custom ROM via TWRP.
Factory Reset + Format Data, then I installed again the same Xiaomi.eu ROM from the external USB. Still stuck in bootloop.
Please I need help to fix the problem
I’m not an expert developer, but I’m not a complete noob either.
This is the first time I have troubles with a brand new Xiaomi Phone.
It’s the first time I get a very expensive phone, but had no choice (they are getting very expensive), because I always buy a Flagship Xiaomi to get all the community support possible.
And I had to change the ROM to Xiaomi.eu, because the Official Global ROM is full of bloatware I had a good experience with Xiaomi.eu ROMs with my old Xiaomi Mi 4 and Mi 5.
At this point I don’t mind going back to stock MIUI Global ROM.
I suppose that with access to boot loader I can flash the Official ROM from PC with MiFlash2020-3-14-0? If it’s the case can somebody show me detailed steps to do that?
For Mi 10 Official Global there is the Stable Full ROM (miui_UMIGlobal_V11.0.2.0.QJBMIXM_4f986c08cb_10.0 ) (2.45 GB) and Stable ROM (umi_global_images_V11.0.2.0.QJBMIXM_20200328.0000.00_10.0_global_09b168ff9e) (3.76 GB). Which One to flash from PC with MiFlash?
I can’t afford to hard brick the device
Thank you very much.
andromomo said:
Dear fellow XDA-dev community members,
Xiaomi Mi 10 (umi), coming from original stock ROM, MIUI 11 GLOBAL version V11.0.2.0.QJBMIXM.
Bootloader unlocked official way via MiFlash Unlock 4.5.514.47.
Custom recovery TWRP 3.4.1b-0313 installed via XiaoMiTool V2.
Tested root by installing Magisk 20.3 via TWRP, no problem, then updating to Magisk 20.4 with the Magisk Manager 7.5.1.
The problems started when I tried to install Xiaomi.eu Custom ROM : xiaomi.eu_multi_MI10_V11.0.25.0.QJBCNXM_v11-10
Downloaded the Xiaomi.eu ROM to PC, then copied to the Download folder of the Phone.
Started phone in upload mode or TWRP. > Wipe > Swipe to Factory Reset + Format Data.
When formatting data I erase all folders in the phone, including the Xiaomi.eu ROM copied in the Download folder.
Some tutorials suggest to copy the Xiaomi.eu ROM from PC to phone after formatting the data, just by connecting the phone in TWRP to the PC, by going to > Mount and enabling MTP.
Tried this method but when I send the Xiaomi.eu ROM file to the phone the progress bas doesn’t move.
So I restarted the phone, without installing the Custom ROM, went through all the screens of initial phone configuration. Lost Magisk and root (but I supposed that it’s not mandatory to install Custom ROM). Copied again the Xiaomi.eu ROM zip file to the Download folder. Rebooted to TWRP. This time I just did Factory Reset but without Format Data. Then > Install to install the Xiaomi.eu new ROM. Cleared Dalvik Cache then reboot.
PROBLEM : bootloop. Stuck with the 5G logo forever, waited more than 30 min, no change.
Still have access to recovery TWRP and to bootloader mode. I suppose this is a soft brick?
I did > Wipe, Swipe to Factory Reset + Format Data, restarted… no change.
Copied this time the Xiaomi.eu ROM to a clean formatted (FAT32) USB drive. As shown in some tutorials, you can us an external USB drive via USB OTG to install the Custom ROM via TWRP.
Factory Reset + Format Data, then I installed again the same Xiaomi.eu ROM from the external USB. Still stuck in bootloop.
Please I need help to fix the problem
I’m not an expert developer, but I’m not a complete noob either.
This is the first time I have troubles with a brand new Xiaomi Phone.
It’s the first time I get a very expensive phone, but had no choice (they are getting very expensive), because I always buy a Flagship Xiaomi to get all the community support possible.
And I had to change the ROM to Xiaomi.eu, because the Official Global ROM is full of bloatware I had a good experience with Xiaomi.eu ROMs with my old Xiaomi Mi 4 and Mi 5.
At this point I don’t mind going back to stock MIUI Global ROM.
I suppose that with access to boot loader I can flash the Official ROM from PC with MiFlash2020-3-14-0? If it’s the case can somebody show me detailed steps to do that?
For Mi 10 Official Global there is the Stable Full ROM (miui_UMIGlobal_V11.0.2.0.QJBMIXM_4f986c08cb_10.0 ) (2.45 GB) and Stable ROM (umi_global_images_V11.0.2.0.QJBMIXM_20200328.0000.00_10.0_global_09b168ff9e) (3.76 GB). Which One to flash from PC with MiFlash?
I can’t afford to hard brick the device
Thank you very much.
Click to expand...
Click to collapse
try this
format data
reboot recovery
connect phone to pc
put zip file ro phone
wipe cache an dalvik cache
install zip
wipe again
reboot recovery
wipe again
go to reboot
power off the phone
now wen its shut down power it on
an it shut boot
it will take a litle time
andromomo said:
Dear fellow XDA-dev community members,
Xiaomi Mi 10 (umi), coming from original stock ROM, MIUI 11 GLOBAL version V11.0.2.0.QJBMIXM.
Bootloader unlocked official way via MiFlash Unlock 4.5.514.47.
Custom recovery TWRP 3.4.1b-0313 installed via XiaoMiTool V2.
Tested root by installing Magisk 20.3 via TWRP, no problem, then updating to Magisk 20.4 with the Magisk Manager 7.5.1.JBMIXM_4f986c08cb_10.0 ) (2.45 GB) and Stable ROM (umi_global_images_V11.0.2.0.QJBM
Thank you very much.
Click to expand...
Click to collapse
hi didt it work for u
IT WORKED properly like a charm!!!
Dear -fluffy-,
Thank you very much for your quick reply.
I followed precisely your instructions. I was able to copy de ROM zip file from PC to the phone (the transfer bas went smoothly, as opposite as before).
IT WORKED properly like a charm!!!
Booting the phone took me 2 min.
---------- Post added at 12:57 PM ---------- Previous post was at 12:47 PM ----------
Dear -fluffy-,
Thank you very much for your quick reply.
I followed precisely your instructions. I was able to copy de ROM zip file from PC to the phone (the transfer bas went smoothly, as opposite as before).
IT WORKED properly like a charm!!!
Booting the phone took me 2 min.
---------- Post added at 01:15 PM ---------- Previous post was at 12:57 PM ----------
I followed precisely your instructions. I was able to copy de ROM zip file from PC to the phone (the transfer bas went smoothly, as opposite as before).
IT WORKED properly like a charm!!!
Booting the phone took me 2 min.
Quick questions, do netflix and google pay work after the flash?
tott2003 said:
Quick questions, do netflix and google pay work after the flash?
Click to expand...
Click to collapse
yes
cedric3320 said:
4 step:
THIS ONE OF THE MUST IMPORTANT STEP
In twrp menu you have to go in Wipe data on choose format data
Click to expand...
Click to collapse
Hello,
i have a silly question about step 4:
someone says we should "Wipe Data", someone says we should "Format Data" ,
i don't see a real difference unless we want to change the filesystem type.
Advices ?
And also, when we format ( or wipe ) the "Data" partition, are we formatting the 256 GB partition ?
if yes, this is a really huge drawback for us who want to change ROM more frequently than other android users, because we have to backup a 256 GB partition ...
This is not fast to do online ( at least with my poor connection ) and it is not fast to do on PC or on a USB KEY.
So we have 256 GB and we need to format at each ROM change ? Too bad ...
In the good old times i did extract my microSD card and i was safe .
Someone could explain me please ?
thank you all for your patience...
adario73 said:
Hello,
i have a silly question about step 4:
someone says we should "Wipe Data", someone says we should "Format Data" ,
i don't see a real difference unless we want to change the filesystem type.
Advices ?
And also, when we format ( or wipe ) the "Data" partition, are we formatting the 256 GB partition ?
if yes, this is a really huge drawback for us who want to change ROM more frequently than other android users, because we have to backup a 256 GB partition ...
This is not fast to do online ( at least with my poor connection ) and it is not fast to do on PC or on a USB KEY.
So we have 256 GB and we need to format at each ROM change ? Too bad ...
In the good old times i did extract my microSD card and i was safe .
Someone could explain me please ?
thank you all for your patience...
Click to expand...
Click to collapse
Hello,
You have to format data the first time you flash xiaomi.eu rom because their rom is base on Chinese firmware (if you don't or just wipe it will not boot)
Each time you will flash a rom with different base (from Chinese base to global base or global to Chinese) you will have to format data !!
You format data to remove encryption.
tott2003 said:
Quick questions, do netflix and google pay work after the flash?
Click to expand...
Click to collapse
Google pay isn't working as the safety net doesn't pass on stable realeses, someone made it to work on betas but I had no luck though
Stuck without solutions
Hello,
I tried to flash the latest miui 12. I followed all the steps...
But now I can't acess recovery nor rom.
Basically when i try to flash TWRP with bootloader it just goes back to fastboot.
Also note that the flash is successful. But I somehow can't acess TWRP, just goes back to fastboot
And when I flash the experimental TWRP on the dev thread it boots to recovery but asks for a password.. Impossible to flash anything.. Even after I formated data and everything
I tried flashing other TWRP I found but nothing boots even after trying a lot of time.
I tried <fastboot boot recovery.img> as well
I tried <fastboot erase recovery> and then flash the TWRP as well
I've been trying hard for the last 8 hours.
I also have a backup of when I had MIUI 12. But impossible to flash it with the only recovery I can boot to.
I feel so desperate. I'm out of ideas.
If you have any ideas, I'm listening
Thanks for the help guys.
Dallee said:
Hello,
I tried to flash the latest miui 12. I followed all the steps...
But now I can't acess recovery nor rom.
Basically when i try to flash TWRP with bootloader it just goes back to fastboot.
Also note that the flash is successful. But I somehow can't acess TWRP, just goes back to fastboot
And when I flash the experimental TWRP on the dev thread it boots to recovery but asks for a password.. Impossible to flash anything.. Even after I formated data and everything
I tried flashing other TWRP I found but nothing boots even after trying a lot of time.
I tried <fastboot boot recovery.img> as well
I tried <fastboot erase recovery> and then flash the TWRP as well
I've been trying hard for the last 8 hours.
I also have a backup of when I had MIUI 12. But impossible to flash it with the only recovery I can boot to.
I feel so desperate. I'm out of ideas.
If you have any ideas, I'm listening
Thanks for the help guys.
Click to expand...
Click to collapse
an what is the latest miui12 u try to flash