I'm still using my OPO and just the other day I felt something sliding " INSIDE OF PHONE " when I turn it upside down where top of phone is pointing down something slides down the length of the phone.. It feels like something kindof heavy... I'm guessing battery is loose from too many drops.
Outside of the sliding movement inside the phone - the thing still works and looks like new as I have it in diztronic durable case with re-enforced corners..
Anybody else have this issue. and resolve it. Maybe the glue holding battery in place gave out??? suggestions for an easy fix or is it ok to ignore?
Thanx
Related
Well, overall, I think the build quality of the Touch Pro is wonderfull! I love that its slightly heavy too!
But the keyboard slideoutmechanism, although very solid and robust gives away a worrying noise, sorta like its scraping against something. Anyone managed to confirm if this is nothing to worry about? I feel like I damage the device each time I pull it out.. lol
Regards
According to me that's the LCD flatcable cover sliding into place. With the device opened you'll find a little latch of sorts at the top of the screen back, that slides shut when opened and opens up to give the LCD flatcable some room to roll itself up in.
Nothing to worry about then!
When the screen is up to expose the keyboard there is a rattling sound. When the keyboard is down, no rattle.
who else has experienced this?
Do you think I should return it? If not, do you know what it is that rattles?
( this is not the "spring noise" that I have been reading about, at least I don't think it is)
mine does that
when its slid open there is a piece on the screen part on the side with the camera that can b moved
duno if its normal
Do you mean to say I can see the cause of the noise if I take the battery cover off, or did you disassemble your phone to find it?
no no
just slide the screen out
turn it over
when u look at the back ul see an indent that can be pushed in and out slightly it rattles
well at least now I know what is rattling, thanks
np
but i would like to know if everyone has this
lbhocky19 said:
no no
just slide the screen out
turn it over
when u look at the back ul see an indent that can be pushed in and out slightly it rattles
Click to expand...
Click to collapse
I see the same thing. looks like a cover plate for something.
Yeah i noticed it, too.
It isn't too bad but it is a little annoying.
If you slide that piece enough, you can see a ribbon cable.
It's the ribbon cable that connects the two halves of the phone. There is a little trap door there that covers it up while in the open position. If you watch it as you close the phone, the door opens as you slide it closed. But as it does that, it put tension on the spring, the tension keeps it tight when the phone is closed. When you open, no more tension and it has a little play in it. They should have spec'd the spring to have a little tension on it even in the open position so it would hold it still like when it's closed.
Oh well, probably some reason for it. Nothing to worry about at all though.
I was talking to my buddy at ATT last night. All the Fuze's have the rattle including mine. Nothing to worry
as long as it keeps the damn white screen away im happy
as long as it keeps the damn white screen away im happy
ya I was checking that out, it does look like all they needed was to keep a little spring tension on the door even when its all the way out
petard said:
Yeah i noticed it, too.
It isn't too bad but it is a little annoying.
If you slide that piece enough, you can see a ribbon cable.
Click to expand...
Click to collapse
Mine rattles when closed. annoying
It's a little annoying, not because of the sound but because it makes it seem that much less unfinished. For our money we shouldn't get rattling phones.
My Fuze never rattled til now...
Well, this seems to be a big issue. On mine, the spring doesn't seem to keep the trap door on the back of the display shut at all, its almost "jamming" sometimes when you close the keyboard. I shouldn't have to check to make sure nothing is in the way when retracting the keyboard.
I almost want to scotch tape the black trap door shut to keep it from moving around.
There is a "silver" rectangular metal plate connected to the tension spring that seems to have come loose somehow.
The black door can be slid back and forth freely, as there is "nothing" holding it shut.
I don't like lose metal parts moving around inside my electronics that aren't connected to things they should be. Not at what we paid for this thing.
I see dust problems in the display in the future. I wonder if its time for warranty action?
The magnet holding the stylus seems to have either come off its usual spot or is turned in another direction. But the stylus wasn't holding anymore. Today, I got to work and noticed I had lost the stylus. Is there any known fix for this? I never dropped the phone, it just wouldn't work one day.
Thanks for any help.
Did you open the Stylus? You can srew it (upper black part) up, where you can see the magnet that is hold by a plastic part: it cant move .... did someone fool you?
Greetz
Boris
Well, my stylus is lost now so it's too late. No, nobody was trying to trick me. Are you saying that the only magnet is in the tip of the stylus? The end that you write with? Because I believe I have another one.
with mine you cant write like a pencil only on the touch screen without ink ;-), its a touch pro without branding original from HTC. the magnet in it is placed in the inner stylus ca. 3 cm upwards from the "tip" ..., you can say just in the middle ..
Greetz
Boris
Well, mystylus was going into it's sleeve and not staying in, it was just sliding out. So, I don't know where the magnet was at all.
For me it seems that the contra part in the inner of your device (ferrum or magnetic) has moved or is broken so the magnetic stylus "found nothing to be magnetic with" hope you understand me, my english is worst .... You know that you need a little Power to remove the stylus from his hole. if you could test it with the other stylus that you still own (but must be for the TP!!), wether the stylus is hold or not.... and have a look in the inner of the stylus wether the magnet is there...
good night.... perhaps till tomorrow.... If you need a plan from the inner parts of the TP: i have one
Greetz
Boris
P.S. If you shake your device: Do you hear anything ??
Well, I tried but my replacement stylus didn't work. There is definitely a magnet missing inside the phone. At first it was tight, then it seemed blocked and now it just glides in and out.
So, can anyone give me any hints about what I can do to fix my stylus not sticking in its sleeve? I really need this fixed. Is it safe to open up a Fuze?
This happened to me today...
i have removed the battery, chip, microsd and then the back cover... a bit tricky but it was easy (folowing the dis/assembly guide), for mine the lower part didnt want to go out, so i pull out the speaker connector and then push it out.
and the other magnet was there... and it have a place in the back cover that i think it may be seen if you take the battery out... it have like a dent
now my problem is with the polarity... i dont know how to glue it ... it have 2 positions vertical or horizontal
the vertical position will attract the stylus but it seems not to enter completely
the horizontal will push it, but i dont know if it will hold it as is very hard to test it without adding glue and i will use exposy...
EDIT1: found where it go... its in the vertical position but it need to be tested (because the polarity is different dont know why) if you are going to glue it
EDIT2: i used a plastic card (old medic card, visa, ect) to pry out the back cover from the keyboard
Thanks
Many,many thanks to you.
Same situation so easy but the lose magnet not easy to find except by your tips. Ha, ha I love this forum, So many thanks to the people here who contribute helping each other
jorgepr13 said:
This happened to me today...
i have removed the battery, chip, microsd and then the back cover... a bit tricky but it was easy (folowing the dis/assembly guide), for mine the lower part didnt want to go out, so i pull out the speaker connector and then push it out.
and the other magnet was there... and it have a place in the back cover that i think it may be seen if you take the battery out... it have like a dent
now my problem is with the polarity... i dont know how to glue it ... it have 2 positions vertical or horizontal
the vertical position will attract the stylus but it seems not to enter completely
the horizontal will push it, but i dont know if it will hold it as is very hard to test it without adding glue and i will use exposy...
EDIT: found where it go... its in the vertical position but it need to be tested (because the polarity is different dont know why) if you are going to glue it
Click to expand...
Click to collapse
this phone is really light weight and somewhat solid
but has anyone tortured it yet? dropped it, scratched it, hit it on stuff?
See Here
sweet thx
so it looks like if you drop it from ear height your pretty much screwed...
I have a problem with how the sides curve towards the face with nothing to stop the phone slipping up. I have managed to have the phone slip upwards when I press the power button to turn the phone on though haven't actually quite dropped it yet but can see it happening if I do this when distracted by a pen/paper. I really need a rubberized case for this.
So there is this thin plastic-ish strip on top of the button ic but under the physical button, just open your back cover and you'll have an idea of what i am talking about, it has this black center and is goldenish color the rest.
So, I was opening the cover and that 'thing' from the power button and volume + button fell off, I didnt pay much attention, but now those 2 buttons wont work on there own, still I can get them to work by opening the cover and using something pointed, so as far as the IC or the chip or whatever it is, is still fine.
I need some suggestions on some makeshift ideas on how to fix it so the buttons will work with the cover on. Also if possible, anybody know if the mobile guys fix it and how much it costs? Dont worry about where you live, I just want to have a rough idea I dont like walking in to a mobile mall and feeling all dumb
Thanks in advance, and the other thanks you'll all receive anyway for helping
Fas1h said:
So there is this thin plastic-ish strip on top of the button ic but under the physical button, just open your back cover and you'll have an idea of what i am talking about, it has this black center and is goldenish color the rest.
So, I was opening the cover and that 'thing' from the power button and volume + button fell off, I didnt pay much attention, but now those 2 buttons wont work on there own, still I can get them to work by opening the cover and using something pointed, so as far as the IC or the chip or whatever it is, is still fine.
I need some suggestions on some makeshift ideas on how to fix it so the buttons will work with the cover on. Also if possible, anybody know if the mobile guys fix it and how much it costs? Dont worry about where you live, I just want to have a rough idea I dont like walking in to a mobile mall and feeling all dumb
Thanks in advance, and the other thanks you'll all receive anyway for helping
Click to expand...
Click to collapse
Well, you can easily fix it yourself if you are a bit smart. Just try to stick a box shaped paper tape at that place where the plastic broke off from.
Cut tape in a small rectangle. Then cut that rectangle into many small pieces of same size and form a small rectangle. Then stick them to the place where "that thing" came off.
You can also use a double end sticky tape but usually the thickness is defined so I am not sure if that will help.
HTC Sensation is an old phone however, you should easily find old bodies/ new cases to replace your current body.
Good Luck
Thanks my explorer had a similar problem Its original back cover's buttons worn off, so I folded up a piece of paper and stuck it there and used a cover over the worn out back case. With sensation there is no way to make the paper stay in the same place, i didnt think of paper tape or double sided tape, will give it a shot.