I can boot into fastboot, but other than that the phone gets stuck on M while booting. I would really appreciate the help as I need the phone and I am too broke to buy a new one at this moment.
Currently I have tried the following without any luck.
RSD_Lite - phone is listed as adb interface in device manager but is not detected by rsd_lite.
Update through ADB - phone displays installation aborted.
Factory Reset - fixes nothing.
I also tried running rsd_lite scripts on linux, but couldn't get it to work properly.
All the help would be tremendously appreciated.
same brick please help.
Related
Does anyone know how to un-brick a Motorola Cliq Xt/Quench? If possible...I recently bricked it (tried to load a custom recovery unsuccessfully). I used RDS lite v4.6 to restore it to stock version but it failed. I turned on my phone and went to and did a factory reset (i really don't know why.... i'm to much of an idiot) it turned off and back on but this time it to a blue screen displaying my phones info usb fastboot, machine id, and build date and S/N and says below ** Security on, fastboot disabled**
can any one help, please?
Greeting to all,
i have bricked my phone here is how;
i tried to increase cpu speed to 2gh by installing ElementalX and my phone does not boot after that, so i tried to delet it but i wiped all system, now the phone will not swith on it stuck on htc logo,
i downloaded toolkit which have all commands, i downloaded many ruu version but no luck, all installation will fail
i tried push the zip through adb and even try to installed through 'install ruu factory' command but no joy, some ruu will progress to 100% on my pc but will fail to installed in the phone it says failed to install error 12
i am with meteor network in ireland, i appreciate if any one can help.
i tried about 20 hours but no luck at all, there is no system in the phone all wiped out , even i tried few ruu.exe still doe not work i be happy if i be able to get it back to work rooted or unrooted.
now through the tool i can easily unlock and relock the boot loader and i know to go to fastboot or recovery mode that is all i know.
thanks in advance.
soleved
Never mind no one seems to help, well i fixed after lots try and suffer. case closed.
Hi,
I'm facing similar problem - what steps did you took to fix it?
Hello Users,
I've the following problem: A few days ago my about 3-year old Motorola RAZR HD XT925 (O2 Germany) stuck in using and I tried to restart it with holding "power" and "volume down". After that my phone seemed to boot but stuck at the pulsing "M"-Logo. Nothing happens. I do not have any experience with flashing smartphones and all this stuff so I started to read here and on other websides how I could solve my problem and I came up to this page here in the forum: [TUTORIAL] How to Flash Stock Motorola Fastboot files.
Tried to do everything like shown but I came up to the step where I start RSD Lite (tried v6.1.4 and v6.2.4) and my phone should be listed but it does not. ATB & Motorola USB Drivers are installed, but when I start the Utility the programm is searching for update but finds nothing. (I think it can't cause my phone can't get into mass-storage-mode without booting, or?) Fastbootmode seems ok, everything like it should be.
Can't figure out how I should get my phone shown in RSDLite.
So if anyone could help me I would be so thankful, cause I really love my RAZR and don't want to bury it! Additional needed information and/or pictures are no problem if needed!
Thanks in advantage!
(I apologize for any kind of grammar/spelling faults!)
Edith says: phone runs on Stock-Android (updated to 4.4.2).
hello
i have the motorolla xt1060. It has undergone a hard brick after I tried to root it with this method http://forum.xda-developers.com/moto-x/general/moto-x-att-vzw-root-busybox-lpa23-12-xx-t3244627. I inserted qualcomm driver after that i flashed bootloader with python and it says that it flashed successfully but the screen is still blank. Then I go to rsd lite and flash Repair_Boot.xml file but it says that the phone failed to switch to fastboot mode
could you guys help me please or give some kind of advice?
thnks.
Hello, my Motorola e Android phone got hard bricked and it began suddenly with the first error message being constant boot looping and eventually going to an error message with an adroid on its back where it said partition was corrupt or damaged and the only choices were try again or factory reset. I kept trying again.
I tried to fix it and eventually ended up stuck on ap fastboot flash mode(secure) and it says oem locked.
I gave up trying to do it myself and want to factory reset but recovery mode won't work even if I press it, says that start up failed and goes back to fastboot mode. It's stuck.
Serial number is ZY22DLT4R and last letter is a V or W, can't tell.
I dont know to flash or custom rom. Tried a few but I only have windows 10 on my PC and it didn't install drivers properly and I need this phone fixed ASAP . I think I'm considered a newbie.
I also need to know if it's too far gone so I'm prepared to buy another crappy phone and lose all my data. I don't have days/weeks to learn tutorials about how to mod, etc.
Please help.
edit: I don't know if my bootloader is locked or unlocked.
Re-flash phone's Stock ROM by means of this tool
Download Moto Auto Flash Tool v8.2 by Jamesjerss (2022)
Download Moto Auto Flash Tool v8.2 by Jamesjerss to flash Firmware on Motorola Phones. Follow this guide to Root, Unlock Bootloader, etc.
www.ytechb.com