I soft bricked this phone since i edited copy pasted build prop by mistake and then the permisions have changed now everytime i try to boot up the phone it gets stuck after the logo then the screen goes black , the problem is that i cant find anywhere usb drivers for this model
on the back of the phone it says that its made it china
i have no idea where to look for the drivers i went to the official site but the support there is crap,
lindi000 said:
I soft bricked this phone since i edited copy pasted build prop by mistake and then the permisions have changed now everytime i try to boot up the phone it gets stuck after the logo then the screen goes black , the problem is that i cant find anywhere usb drivers for this model
on the back of the phone it says that its made it china
i have no idea where to look for the drivers i went to the official site but the support there is crap,
Click to expand...
Click to collapse
Greetings and welcome to xda, do you have a custom recovery ? If it is a mediatek device (most chinese phones are) then you may be able to use generic drivers. If you ask your question here
http://forum.xda-developers.com/android/help
hopefully the experts there can help you
Good Luck
Sawdoctor
sawdoctor said:
Greetings and welcome to xda, do you have a custom recovery ? If it is a mediatek device (most chinese phones are) then you may be able to use generic drivers. If you ask your question here
http://forum.xda-developers.com/android/help
hopefully the experts there can help you
Good Luck
Sawdoctor
Click to expand...
Click to collapse
unfortunatley i dont have custom recovery only stock recovery mode
but thanks for your reply anyways
Related
Hi..
So to start off, I'm really desperate right now...
I had a BEE 9500 Phone with an MT6589 board, it was all working fine, until I accidently formatted the system partition, and I have no backup even... I only have a system folder backup, but is that even useful ?
When it was working, this is what MtkDroidTools showed :
i.imgur.com/hNBv1a7.png < I cant post link normally since I'm new.
Now it shows this, and mind you, the phone is stuck in boot loop and it will only show this when I'm mounting USB via CWM Recovery ONLY, It won't detect the phone normally when in boot loop (driver issue maybe) :
i.imgur.com/wY3yPFy.png
IMEI is blank ... everything is wrong... I don't know ...
(I have no idea why, but its showing the android L stuff, I have no idea whats going on...)
And I tried going into fastboot mode and using fastboot.exe to flash a system.img I created but it will keep saying <waiting for device> the whole time...
Any idea ? I think my phone is dead at this rate....
Since we do not have a forum for this device, kindly post your issue in Android Q&A, Help & Troubleshooting so that the right expert may be of help.
Sounds like wrong bootimage or incomplete system image. You may need to find Original Stock firmware.
Perseus71 said:
Since we do not have a forum for this device, kindly post your issue in Android Q&A, Help & Troubleshooting so that the right expert may be of help.
Sounds like wrong bootimage or incomplete system image. You may need to find Original Stock firmware.
Click to expand...
Click to collapse
Alright thanks, I will try posting there, but I'm afraid that no one would have the stock firmware since I looked everywhere for that, though I hope someone does :S
PLEASE HELP ME!
My device is Lenovo A690. Just check the specs in the net, however i will say now to you it's an old device.
So my problem started when i tried to click Tools>Patch to Android>Remove patch to services.jar in Lucky Patcher. I did that because i want to remove the patch i did to be able to install apk files with different signatures whatsoever.
Now im in a bootloop. I can access interface for a second or two but after that, it hangs and reboots endlessly! The worst of this is i dont know what is the hell happening in my recovery since i cant access it. I know the right combination of keys, i see lenovos logo flashing to white indicating that it goes to recovery, but after that it just repeats and recovery wont open.
Please help on what should i do to fix this. Im willing to wait for some people to answer this thread. :'(
kylextrm546 said:
PLEASE HELP ME!
My device is Lenovo A690. Just check the specs in the net, however i will say now to you it's an old device.
So my problem started when i tried to click Tools>Patch to Android>Remove patch to services.jar in Lucky Patcher. I did that because i want to remove the patch i did to be able to install apk files with different signatures whatsoever.
Now im in a bootloop. I can access interface for a second or two but after that, it hangs and reboots endlessly! The worst of this is i dont know what is the hell happening in my recovery since i cant access it. I know the right combination of keys, i see lenovos logo flashing to white indicating that it goes to recovery, but after that it just repeats and recovery wont open.
Please help on what should i do to fix this. Im willing to wait for some people to answer this thread. :'(
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
We cannot provide technical support nor can other members reply to your posts here on XDA Assist. There is no forum specifically for the lenoco A690 at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help. That's a good place to start where members familiar with your device might be able to advise you.
Good luck!
Hello everyone!
I accquired this phone froma chinese online shop (the third one) and i want to change the chinese rom to euro firmware.
The problem resides in that when i changed the rom following the instructions of this forum in the other 2 previous phones i got it was everything alright and worked correctly, but with this last one i can't even make miflash/qlifil recognise Qualcom Com port. Now i only get at miflash the phone recognised with this weird name: b65bc2d5 . I'm affraid to try flashing because i didn't see anyone who got that name on the program and i don't want to get a brick. Also i tried to change the rom by sdcard with fastboot using the same file i used to install the other 2 phone that worked but it still says that the phone is Z90-7 and it wont take the installation file ( it's the second file on boycracked stock official lenovo vibe shot rom page). The thing is that when you upgrade to eu rom the phone model changes to Z90a40 and takes that rom, but not this last one.
I installed all the drivers manually because the phone on vendor mode can't install them itself (vol up + power button and then plug to the pc).
The version of chinese rom is android 6.0.1.
I hope this info will make someone know the solution because i don't.
Thanks and regards.
P.D: Now i'm triying to plug and detect but can't even do miflash detects it.
Hello and thank you for using XDA Assist,
please post your question in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist
Hello everyone! Last night i found my old lg e400 on a drawer and i was curious about its condition. I boot it up and everything is fine. Then, when i reboot, it somehow stuck on the lg logo (it does not even go to the flashing one) and thats it. It is not rooted, nor has cwm recovery installed or usb-debugging enabled. All i can do is see the lg logo, or boot into emergency mode. I tried recovery via lg support tool, but i get errors when it comes to writing data to device. kdz updater brings extract file error too. Please, help me. I want to fix it because it was a gift from my late girlfriend. Thank you in advance.
Colin_McBrick said:
Hello everyone! Last night i found my old lg e400 on a drawer and i was curious about its condition. I boot it up and everything is fine. Then, when i reboot, it somehow stuck on the lg logo (it does not even go to the flashing one) and thats it. It is not rooted, nor has cwm recovery installed or usb-debugging enabled. All i can do is see the lg logo, or boot into emergency mode. I tried recovery via lg support tool, but i get errors when it comes to writing data to device. kdz updater brings extract file error too. Please, help me. I want to fix it because it was a gift from my late girlfriend. Thank you in advance.
Click to expand...
Click to collapse
Greetings and welcome to assist. If the lg support tool does not work the emmc chip might have died. Try asking your question here
http://forum.xda-developers.com/optimus-l3-l5-l7/help
hopefully the experts there may be able to think of something
Good Luck
Sawdoctor
sawdoctor said:
Greetings and welcome to assist. If the lg support tool does not work the emmc chip might have died. Try asking your question here
http://forum.xda-developers.com/optimus-l3-l5-l7/help
hopefully the experts there may be able to think of something
Good Luck
Sawdoctor
Click to expand...
Click to collapse
Greetings to you too, Sawdoctor. That's what i suspected, that a rom chip might have been burnt or erased. I will do ask the experts though, in case i miss something like a detail. Thank you very much for your reply and advice!
Hi Community !
I hope you can help !!
I have a Lemfo Lem4 an root the device.
After the root i take a reboot but the device runs into a Bootloop.
ADB does not work, because ADB says the device was unauthorized and i cant use the keys. Reboot of the device, a restart of the ADB server has also no effect...
Have anyone a idea how i recover the bricked rom 4.4 or has anyone a4.4 rom i can flash ?
The seller (lemfo or DominoMarvel) does not help...
I hope anyone of you can help !
Greetings
Michael
Hi !
Though this thread is not really development but at least there are more users with a similar device , have a look
Good luck !
michael.pusch said:
Hi Community !
I hope you can help !!
I have a Lemfo Lem4 an root the device.
After the root i take a reboot but the device runs into a Bootloop.
ADB does not work, because ADB says the device was unauthorized and i cant use the keys. Reboot of the device, a restart of the ADB server has also no effect...
Have anyone a idea how i recover the bricked rom 4.4 or has anyone a4.4 rom i can flash ?
The seller (lemfo or DominoMarvel) does not help...
I hope anyone of you can help !
Greetings
Michael
Click to expand...
Click to collapse
Greetings and welcome to assist. You need usb debugging enabled to use adb, can you access download or recovery mode to reflash stock firmware ?
There is a thread for your device here
https://forum.xda-developers.com/smartwatch/other-smartwatches/lemfo-smartwatch-development-t3510348
the experts there may be able to assist you further
Good Luck
Sawdoctor
sawdoctor said:
Greetings and welcome to assist. You need usb debugging enabled to use adb, can you access download or recovery mode to reflash stock firmware ?
There is a thread for your device here
https://forum.xda-developers.com/smartwatch/other-smartwatches/lemfo-smartwatch-development-t3510348
the experts there may be able to assist you further
Good Luck
Sawdoctor
Click to expand...
Click to collapse
Hi Sawdoctor !
Thanks for your answer !
Yes i know that i must use ADB with USB debugging, but i have no reason to use them because i cant start the device to select the option (bootloop)
AND i cant use a recovery or download mode because i have ONLY a Powerswitch on the watch... with "sp flash tool" for mtk i can talk with the device, but ADB dont work...
I have a flash program for MTK Processors, also a needed Scatter.txt file for the mtk processor at this watch ... but i need the original rom file to flash the device...
thanks XANTHRAX & SAWDOCTOR for your information about the other threat...
but i dont think a "ROOT" section for Android 5.1 can help a user with Android 4.4 with a boot problem...