I need to rollback or downgrade from 4.0.1 to 3.0 my honor 6 plus
my PE-TL10C432B571 to kitkat,
i have bootloader unlocked, recovery and root.
any help?
Kietas said:
I need to rollback or downgrade from 4.0.1 to 3.0 my honor 6 plus
my PE-TL10C432B571 to kitkat,
i have bootloader unlocked, recovery and root.
any help?
Click to expand...
Click to collapse
You have to flash a transitional package. Check hihonor.com. They may have a package to downgrade.
http://m.huawei.com/mymobile/consumer/support/downloads/index.htm
I found a transitional package here.
Download, extract to get dload folder containing UPDATE.APP
copy dload folder to the root of your SD card, insert SD card in your phone.
Turn off the phone, press and hold power+vol up + vol down until the phone starts, let go of power but keep pressing the other two for about 5 sec more.
Your phone will enter a forced update and will transition from Android marshmallow to Android lollipop.
Sent from my PLK-L01 using XDA Labs
These are the images containing the name of the package, Google using the same name if the above link does not work somehow.
Sent from my PLK-L01 using XDA Labs
muradulislam said:
These are the images containing the name of the package, Google using the same name if the above link does not work somehow.
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
If i have TWRP recovery installed?
Kietas said:
If i have TWRP recovery installed?
Click to expand...
Click to collapse
Then first download the firmware you are using right now. Use Huawei update extractor to extract stock recovery.img and flash it in fastboot and then do the above.
Sent from my PLK-L01 using XDA Labs
Kietas said:
If i have TWRP recovery installed?
Click to expand...
Click to collapse
If you want to roll back, download the firmware you're on now, extract the recovery and flash it, then flash the rollback package
muradulislam said:
Then first download the firmware you are using right now. Use Huawei update extractor to extract stock recovery.img and flash it in fastboot and then do the above.
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
How do i download that firmware?
Kietas said:
How do i download that firmware?
Click to expand...
Click to collapse
First check the build number of your firmware in settings > about phone.
There is a tool mentioned in the thread below
http://forum.xda-developers.com/honor-7/general/huawei-firmware-finder-team-mt-t3469621/page1
Install and give it a try to find that firmware. Report back if anything comes up?
Sent from my PLK-L01 using XDA Labs
muradulislam said:
First check the build number of your firmware in settings > about phone.
There is a tool mentioned in the thread below
http://forum.xda-developers.com/honor-7/general/huawei-firmware-finder-team-mt-t3469621/page1
Install and give it a try to find that firmware. Report back if anything comes up?
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
nope, it only found those.
I found the same as you, I'll keep looking
Kietas said:
nope, it only found those.
Click to expand...
Click to collapse
Just to confirm, what is your build number and Android version?
I will find one for you or stock recovery...
Sent from my PLK-L01 using XDA Labs
muradulislam said:
Just to confirm, what is your build number and Android version?
I will find one for you or stock recovery...
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
my build number is PE-TL10C432B571
and my android version is 6.0
just wanna downgrade to 4.4 for better gaming performance.
Kietas said:
my build number is PE-TL10C432B571
and my android version is 6.0
just wanna downgrade to 4.4 for better gaming performance.
Click to expand...
Click to collapse
Rollback to 5.1 first http://www.hihonor.com/uk/support/details/index.html?DOC_ID=79626
Then rollback to KitKat http://consumer.huawei.com/fi/support/downloads/detail/index.htm?id=54263
Sent from my H60-L04 using XDA Labs
goldfinv said:
Rollback to 5.1 first http://www.hihonor.com/uk/support/details/index.html?DOC_ID=79626
Then rollback to KitKat http://consumer.huawei.com/fi/support/downloads/detail/index.htm?id=54263
Sent from my H60-L04 using XDA Labs
Click to expand...
Click to collapse
So, what do i do with a "dload" folder?
btw i have TWRP recovery installed...
Kietas said:
So, what do i do with a "dload" folder?
Click to expand...
Click to collapse
Copy dload folder to SD, make sure it has UPDATE.APP inside it.
Turn off your phone, press and hold vol up + vol down + power.
Once your phone boots, let go of power but keep other two pressed for 5,6 sec more.
Your phone will start a rollback/installation by itself
muradulislam said:
Copy dload folder to SD, make sure it has UPDATE.APP inside it.
Turn off your phone, press and hold vol up + vol down + power.
Once your phone boots, let go of power but keep other two pressed for 5,6 sec more.
Your phone will start a rollback/installation by itself
Click to expand...
Click to collapse
When i do that, it just stays on honor logo...
muradulislam said:
Then first download the firmware you are using right now. Use Huawei update extractor to extract stock recovery.img and flash it in fastboot and then do the above.
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
But you said to do this?
Kietas said:
But you said to do this?
Click to expand...
Click to collapse
I apologize, I answer so many posts that I don't remember individual problems. My bad.
First you need to replace twrp with the stock recovery (download the firmware you are using now, extract to get UPDATE.APP, use Huawei update extractor to open UPDATE.APP and you will see many images, right click recovery and extract to platform-tools folder and then flash it using fastboot).
Then copy the dload folder of first transition package to SD, do three button as described above.
Then copy the dload folder of second transition package to SD and do the three button method.
muradulislam said:
I apologize, I answer so many posts that I don't remember individual problems. My bad.
First you need to replace twrp with the stock recovery (download the firmware you are using now, extract to get UPDATE.APP, use Huawei update extractor to open UPDATE.APP and you will see many images, right click recovery and extract to platform-tools folder and then flash it using fastboot).
Then copy the dload folder of first transition package to SD, do three button as described above.
Then copy the dload folder of second transition package to SD and do the three button method.
Click to expand...
Click to collapse
You said that you can find me a one!
And why did you delete that post?
Sorry again, read the whole thread and your actual problem is, you can not find the firmware you are using now to extract recovery from it?
Am I right?
---------- Post added at 04:52 PM ---------- Previous post was at 04:50 PM ----------
Kietas said:
You said that you can find me a one!
And why did you delete that post?
Click to expand...
Click to collapse
I had a lot of stuff to do recently and that post is still there.
I understand how you feel but usually I don't make promises which I can't keep. I just checked out my promise and I apologize again for forgetting and will do this 1st thing in the morning.
Related
This is just the Grouper KRT16S OTA package from Google. Bugfixes, 1.4Mb in size. ZIP file attached. I am not your tech support to get ADB working on you laptop or why your Nexus 7 does weird things after installing so don't be surprised if I ignore questions that can be answered by searching.
Original file name:
3aad414bf97cede8ecbc2027597e7f01bfe1ce47.signed-nakasi-KRT16S-from-KRT16O.3aad414b.zip
If you are stock and want to update from KRT16O then just drop the zip into your adb folder and sideload it in recovery:
Code:
adb sideload signed-nakasi-KRT16S-from-KRT16O-3aad414b.zip
Help this helps someone.
kpetrie77 said:
This is just the Grouper KRT16S OTA package from Google. Bugfixes, 1.4Mb in size. ZIP file attached. I am not your tech support to get ADB working on you laptop or why your Nexus 7 does weird things after installing so don't be surprised if I ignore questions that can be answered by searching.
Original file name:
3aad414bf97cede8ecbc2027597e7f01bfe1ce47.signed-nakasi-KRT16S-from-KRT16O.3aad414b.zip
If you are stock and want to update from KRT16O then just drop the zip into your adb folder and sideload it in recovery:
Code:
adb sideload signed-nakasi-KRT16S-from-KRT16O-3aad414b.zip
Help this helps someone.
Click to expand...
Click to collapse
I have a question. If this can be side loaded to recovery and I assume you mean twrp or cwm why can't it just be down loaded to device and flashed through recovery? Maybe I just don't understand what you mean by sideloaded. Thanks if you reply and if not I read the op and thanks for this
Sent from my HTCONE using Xparent Blue Tapatalk 2
Also with unlocked Bootloader and TWRP I get this update OTA and installation went fine.
ml_taz said:
Also with unlocked Bootloader and TWRP I get this update OTA and installation went fine.
Click to expand...
Click to collapse
Same for me, OTA went fine with TWRP
Received tonight at 02.30 cet!!! :good:
ml_taz said:
Also with unlocked Bootloader and TWRP I get this update OTA and installation went fine.
Click to expand...
Click to collapse
How did you update via twrp? I'm having bluetooth.apk error. It always fail. =(
Sent from my Nexus 7 using xda app-developers app
ianmedina said:
How did you update via twrp? I'm having bluetooth.apk error. It always fail. =(
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
use adb sideload command, read the OP
ianmedina said:
How did you update via twrp?
Click to expand...
Click to collapse
I didn't update via TWRP! I get the update OTA! Also I have unlocked BL, Root and TWRP.
If you didn't get it via OTA you can sideload the Zip from Post #1.
ml_taz said:
I didn't update via TWRP! I get the update OTA! Also I have unlocked BL, Root and TWRP.
If you didn't get it via OTA you can sideload the Zip from Post #1.
Click to expand...
Click to collapse
Whefe can i find the adb folder? Sorry about the question..
Hopefully you can walkthrough me or tell me the step by step.
Sent from my Nexus 7 using xda app-developers app
ianmedina said:
Whefe can i find the adb folder? Sorry about the question..
Hopefully you can walkthrough me or tell me the step by step.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
platform-tools, SDK
View attachment 2404062
treIII said:
I have a question. If this can be side loaded to recovery and I assume you mean twrp or cwm why can't it just be down loaded to device and flashed through recovery? Maybe I just don't understand what you mean by sideloaded. Thanks if you reply and if not I read the op and thanks for this
Sent from my HTCONE using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
The stock recovery does not look for a zip on the device without a command file telling it there is one present to flash.
ivn888 said:
platform-tools, SDK
View attachment 2404062
Click to expand...
Click to collapse
Thanks... But i think i'm gonna lose root?
Sent from my Nexus 7 using xda app-developers app
ianmedina said:
Thanks... But i think i'm gonna lose root?
Click to expand...
Click to collapse
No, doesn't touch su.
Sent from my HTC6500LVW using Tapatalk
kpetrie77 said:
No, doesn't touch su.
Sent from my HTC6500LVW using Tapatalk
Click to expand...
Click to collapse
How about my twrp? I might lose it.
Sent from my Nexus 7 using xda app-developers app
ianmedina said:
How about my twrp? I might lose it.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I believe the stock recovery will be installed with the update? but you can always reinstall TWRP with flashify......
What folder was this update downloaded too?
Re: OTA
bonzer2u said:
I believe the stock recovery will be installed with the update? but you can always reinstall TWRP with flashify......
Click to expand...
Click to collapse
The OTA process works with TWRP but reloads stock recovery AND removes root. No problem getting both back through the usual methods.
ianmedina said:
How about my twrp? I might lose it.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
It's a nexus. Its not hard to get back recovery and root.
Sent from my Nexus 7 using XDA Premium HD app
ianmedina said:
How did you update via twrp? I'm having bluetooth.apk error. It always fail. =(
Click to expand...
Click to collapse
ianmedina said:
Whefe can i find the adb folder? Sorry about the question..
Hopefully you can walkthrough me or tell me the step by step.
Click to expand...
Click to collapse
ianmedina said:
Thanks... But i think i'm gonna lose root?
Click to expand...
Click to collapse
ianmedina said:
How about my twrp? I might lose it.
Click to expand...
Click to collapse
I'm going to say some things not to be mean or rude but to keep you out of trouble. It is not installing because you do not know what you are doing and have not taken the initiative to learn some basics for yourself. Except for the fact you are not on the correct ROM to install this update in the first place, I would say losing root and TWRP would be the best thing for now.
You are going screw up your device and have no idea how to fix it yourself or even what information to provide for others to help you fix it. Your best bet would to be restoring to stock with a factory image and not screw around until you are up to speed.
There are ton of FAQ's and guides on this site in the general sections. Learn how to install and use ADB and fastboot. Read up on the different types up zip files and how they are installed. If you are using a one click, understand what ADB or fastboot commands are going on behind the scenes and exactly what it is pushing to your device.
Once you have a general understanding of things, please come and play around as much as you want. If you do something that causes a bootloop you will at least know how to recover your device.
bonzer2u said:
I believe the stock recovery will be installed with the update? but you can always reinstall TWRP with flashify......
Click to expand...
Click to collapse
ChauncyG said:
The OTA process works with TWRP but reloads stock recovery AND removes root. No problem getting both back through the usual methods.
Click to expand...
Click to collapse
A 5.4Mb recovery is not going to fit in a 1.4Mb zip file. Also see post 3, 4 and 8. Root and TWRP or CWM will remain intact. Bad information is worse than no information.
"Once you have a general understanding of things, please come and play around as much as you want. If you do something that causes a bootloop you will at least know how to recover your device.A 5.4Mb recovery is not going to fit in a 1.4Mb zip file. Also see post 3, 4 and 8. Root and TWRP or CWM will remain intact. Bad information is worse than no information."
Not trying to give bad info just relating my personal experience. You are correct that a full recovery image file at 5.4mb could not fit, even zipped, in a 1.4mb update, however, a full recovery image file is not needed to change the behavior of things. Root and the ability to boot back into TWRP were lost during my update process. It was easily corrected but it did happen. Others have reported a different experience. That was mine.
A good scientist reports ALL observations and reserves judgement until a complete data set is established.
How would one go about this? I want the camera improvements lol
BugJuice said:
How would one go about this? I want the camera improvements lol
Click to expand...
Click to collapse
Download the 4.4 to 4.4.2 update then I think you just flash it in recovery.
Badd_blood said:
Download the 4.4 to 4.4.2 update then I think you just flash it in recovery.
Click to expand...
Click to collapse
Would I loose root? Also where would I find the 4.4 to 4.4.2 update?
Sent from my Nexus 5 using XDA Premium 4 mobile app
BugJuice said:
Would I loose root? Also where would I find the 4.4 to 4.4.2 update?
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You shouldn't lose root but i'd ask someone else about that, but here is the page with the download link http://www.androidbeat.com/2013/12/...-4-4-2-kitkat-update-nexus-4-nexus-5-nexus-7/
BugJuice said:
How would one go about this? I want the camera improvements lol
Click to expand...
Click to collapse
Full Instructions in Nexus 5 OTA Helpdesk:
http://forum.xda-developers.com/showthread.php?t=2523217
Or http://forum.xda-developers.com/showthread.php?p=14
Sent from my Nexus 5 using Tapatalk
Badd_blood said:
Download the 4.4 to 4.4.2 update then I think you just flash it in recovery.
Click to expand...
Click to collapse
Doesn't work for me. Get an error while installing the Zip. But at the main time i use volume mode, dsp manager etc....and i saw that any modification would break the OTA so perhaps it's because of that it doesn't work
flashmp3 said:
Doesn't work for me. Get an error while installing the Zip. But at the main time i use volume mode, dsp manager etc....and i saw that any modification would break the OTA so perhaps it's because of that it doesn't work
Click to expand...
Click to collapse
I managed to go from 4.4 to 4.4.2. I followed different stuff but overall what i did on my 4.4.2 custom kernel :
Copy http://android.clients.google.com/p...ed-hammerhead-KOT49H-from-KRT16M.b3d1f307.zip to sdcard
Flash the KRT16M stock image. Follow @abaaaabbbb63 guide forum.xda-developers.com/showthread.php?t=2513701
If you want to keep data intact flash only the boot.img, system.img
Once the last file is flashed, just go from fastboot to recovery mode then install the .zip http://android.clients.google.com/p...ed-hammerhead-KOT49H-from-KRT16M.b3d1f307.zip like you would install any zip from recovery (install zip from sdcard)
reboot
ps : I had lost root so if it's your case, just reflash recovery :
http://forum.xda-developers.com/showthread.php?t=2511952
I had kept the files untouched in my C:\Program Files\Android\android-sdk\platform-tools> so i just had to open cmd in that directoy (****+right click --> cmd)
Then :
Code:
fastboot flash recovery recovery.img
Now 4.4.2 with root and no loss of data
so cyanogen website has the XNPH22Q zip file, however its not flashable with TWRP when I tired, but xda forum has XNPH22R which is flashable version. What's makes the difference? And how would I go about to flashing the original XNOH22Q ROM from official cyanogen website? Thanks in advance.
Sent from my One using Tapatalk
zabih107 said:
so cyanogen website has the XNPH22Q zip file, however its not flashable with TWRP when I tired, but xda forum has XNPH22R which is flashable version. What's makes the difference? And how would I go about to flashing the original XNOH22Q ROM from official cyanogen website? Thanks in advance.
Sent from my One using Tapatalk
Click to expand...
Click to collapse
Where did you see the 22Q on official CM website?
It's already for a couple of weeks 25R.
https://cyngn.com/products/oneplusone/
And it's specifically says cm-11.0-XNPH25R-bacon-signed-fastboot.zip, so should be pushed with fastboot.
Oh lol nvm I'm going crazy . lol.
Would u know how to push with fastboot? The commands and process I mean
Sent from my One using Tapatalk
zabih107 said:
Oh lol nvm I'm going crazy . lol.
Would u know how to push with fastboot? The commands and process I mean
Sent from my One using Tapatalk
Click to expand...
Click to collapse
IF I'm not mistaken it should be used SIDELOAD METHOD:
adb sideload NAMEofROM.zip
more reading is here:
http://wiki.cyanogenmod.org/w/Install_CM_for_bacon
http://www.droid-life.com/2013/02/1...date-a-nexus-without-root-or-custom-recovery/
RalphLauren said:
IF I'm not mistaken it should be used SIDELOAD METHOD:
adb sideload NAMEofROM.zip
more reading is here:
http://wiki.cyanogenmod.org/w/Install_CM_for_bacon
Click to expand...
Click to collapse
You don't adb sideload a factory image file, its not a flashable zip to begin with. Doing so might brick your device
zephiK said:
You don't adb sideload a factory image file, its not a flashable zip to begin with. Doing so might brick your device
Click to expand...
Click to collapse
of course you do not sideload if you have factory image as xxx.img file, than you just flash.
But in case of OPO, we have xxx_fastboot.zip file (and it's not a flash-able in recovery from SD card file).
Please give your version, how to instal OPO's "factory_image.zip" into OPO
Yes, please can someone explain how to flash a factory image on the OPO.
Sent from my One using XDA Premium 4 mobile app
Hi, could anyone refer me the latest twrp and adb files that will work on my FRD L09 B385?
I've tried installing twrp 3.0.3 last time. After rebooting to recovery the screen kinda got stuck saying - your device is rooted and cant be trusted
Your device is booting now....
I had to restart the phone then.
sorry for noob question.
zakariya tomal said:
Hi, could anyone refer me the latest twrp and adb files that will work on my FRD L09 B385?
I've tried installing twrp 3.0.3 last time. After rebooting to recovery the screen kinda got stuck saying - your device is rooted and cant be trusted
Your device is booting now....
I had to restart the phone then.
sorry for noob question.
Click to expand...
Click to collapse
Use 3.1.1 from HERE. It should work.
Sent from my Honor 8 using XDA Labs
adriansticoid said:
Use 3.1.1 from HERE. It should work.
Click to expand...
Click to collapse
Thank you. I have another query though. Im my phone's developer menu oem unlock option is off and grayed out. I can't turn it on . Will it be an issue ?
zakariya tomal said:
Thank you. I have another query though. Im my phone's developer menu oem unlock option is off and grayed out. I can't turn it on . Will it be an issue ?
Click to expand...
Click to collapse
Did you unlocked bootloader before?
Sent from my Honor 8 using XDA Labs
zakariya tomal said:
Thank you. I have another query though. Im my phone's developer menu oem unlock option is off and grayed out. I can't turn it on . Will it be an issue ? My bootloader is unlocked
Click to expand...
Click to collapse
Yes i did . I've installed twrp before too. But restoring from twrp caused my system setting not work so i flashed update.zip and other file to go back to stock recovery i guess. I lost twrp recovery that way.
adriansticoid said:
Did you unlocked bootloader before?
Click to expand...
Click to collapse
Yes i did . I've installed twrp before too. But restoring from twrp caused my system setting not work so i flashed update.zip and other file to go back to stock recovery i guess. I lost twrp recovery that way.
zakariya tomal said:
Yes i did . I've installed twrp before too. But restoring from twrp caused my system setting not work so i flashed update.zip and other file to go back to stock recovery i guess. I lost twrp recovery that way.
Click to expand...
Click to collapse
Big mistake man. You should've flashed through dload.
Sent from my Honor 8 using XDA Labs
adriansticoid said:
Big mistake man. You should've flashed through dload.
Click to expand...
Click to collapse
? A senior member recommended this
https://forum.xda-developers.com/honor-8/help/help-thread-questions-t3524455/post72859318
See page 34 and 35
zakariya tomal said:
? A senior member recommended this
https://forum.xda-developers.com/honor-8/help/help-thread-questions-t3524455/post72859318
See page 34 and 35
Click to expand...
Click to collapse
Try flashing the same files again. But this time, extract the update.app then flash them through dload. Largest file first.
Sent from my Honor 8 using XDA Labs
adriansticoid said:
Try flashing the same files again. But this time, extract the update.app then flash them through dload. Largest file first.
Click to expand...
Click to collapse
There are two files http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1278/g104/v73891/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...ll/hw/meafnaf/update_data_full_hw_meafnaf.zip
Which one to extract?
zakariya tomal said:
There are two files http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1278/g104/v73891/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...ll/hw/meafnaf/update_data_full_hw_meafnaf.zip
Which one to extract?
Click to expand...
Click to collapse
Both of them. The update.app inside.
Sent from my Honor 8 using XDA Labs
Adrian dont suggest that
gopinaidu77 said:
Adrian dont suggest that
Click to expand...
Click to collapse
Why?
Sent from my Honor 8 using XDA Labs
adriansticoid said:
Why?
Click to expand...
Click to collapse
Why should he install update.app in the ota ? That will brick his device:crying:
gopinaidu77 said:
Why should he install update.app in the ota ? That will brick his device:crying:
Click to expand...
Click to collapse
Okay I'm officially lost now.
I've finished downloading the firmware . Could you guide me how to fix this?
My phone is working fine with unlocked bootloader. Except flashing twrp didn't work. Volume up+power doesn't get me to recovery. Now since the oem unlocked option is grayed out i cant decide whether i should flash twrp 3.1.1 or not?
gopinaidu77 said:
Why should he install update.app in the ota ? That will brick his device:crying:
Click to expand...
Click to collapse
Should i follow this procedure?
zakariya tomal said:
Should i follow this procedure?
Click to expand...
Click to collapse
This is the same as dload method.
Sent from my Honor 8 using XDA Labs
adriansticoid said:
This is the same as dload method.
Click to expand...
Click to collapse
Yes . Im asking if its safe? I will go back to stock and locked bootloader if i follow this procedure . Right?
zakariya tomal said:
Yes . Im asking if its safe? I will go back to stock and locked bootloader if i follow this procedure . Right?
Click to expand...
Click to collapse
Yes and yes.
So any updates OP?
I use 6x Bln-L22 appreciate the firmware position nougat bln-l22 ... b360, i want to go back bke firmware marsmallow I have downloaded the firmware rollback and firmware firmware marsmallow
When I intall rollback success but my 6x honor is stuck in the logo
I tried press volume + and volume - press power can not install firmware stock and only vibrate 2 times
stock firmware i have moved in sd card dload folder please help me i am newbie
Sent from my iPhone using Tapatalk
hondadeka said:
I use 6x Bln-L22 appreciate the firmware position nougat bln-l22 ... b360, i want to go back bke firmware marsmallow I have downloaded the firmware rollback and firmware firmware marsmallow
When I intall rollback success but my 6x honor is stuck in the logo
I tried press volume + and volume - press power can not install firmware stock and only vibrate 2 times
stock firmware i have moved in sd card dload folder please help me i am newbie
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Do dload again, but when update finished, boot to erecovery first and wipe Data/factory reset, then reboot
Gesendet von meinem BLN-L21 mit Tapatalk
felix-development said:
Do dload again, but when update finished, boot to erecovery first and wipe Data/factory reset, then reboot
Gesendet von meinem BLN-L21 mit Tapatalk
Click to expand...
Click to collapse
how to get erecovery
Sent from my iPhone using Tapatalk
hondadeka said:
how to get erecovery
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
do you have the rollback package for BLN-L22 ? Please share.
are you getting any prompt while booting like your device is unlocked and cant be trusted?
shashank1320 said:
do you have the rollback package for BLN-L22 ? Please share.
are you getting any prompt while booting like your device is unlocked and cant be trusted?
Click to expand...
Click to collapse
i saw the tutorial on xda forum using rollback bln-l24 it could be used on my phone, .... i tried it by pressing the volume button - and i connect it with usb cable out fastboot mode and rescue it says "phone unlocked-frp lock" what's the solution
Sent from my iPhone using Tapatalk
hondadeka said:
i saw the tutorial on xda forum using rollback bln-l24 it could be used on my phone, .... i tried it by pressing the volume button - and i connect it with usb cable out fastboot mode and rescue it says "phone unlocked-frp lock" what's the solution
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
You had to stuck on boot logo..why would it boot if you use the firmware for other region. Flash the Nougat firmware file for your model...BLN-L22 to get rid of it.
shashank1320 said:
You had to stuck on boot logo..why would it boot if you use the firmware for other region. Flash the Nougat firmware file for your model...BLN-L22 to get rid of it.
Click to expand...
Click to collapse
how can i please let me know
Sent from my iPhone using Tapatalk
hondadeka said:
how can i please let me know
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
What was your last firmware build number on Nougat?
shashank1320 said:
What was your last firmware build number on Nougat?
Click to expand...
Click to collapse
I use BLN-L22xxxxb360, then what should i do
Sent from my iPhone using Tapatalk
hondadeka said:
I use BLN-L22xxxxb360, then what should i do
Click to expand...
Click to collapse
There is no b360 for BLN-L22. Last version on FF was b350 and official OTA was b340.
Download the b340 from FF and use dload. There is a quick guide in my signature for dload method.
shashank1320 said:
There is no b360 for BLN-L22. Last version on FF was b350 and official OTA was b340.
Download the b340 from FF and use dload. There is a quick guide in my signature for dload method.
Click to expand...
Click to collapse
so i have to download b340, is there any link and how to implement it because everytime i go into erecovery always begetar 2 times
Sent from my iPhone using Tapatalk
hondadeka said:
so i have to download b340, is there any link and how to implement it because everytime i go into erecovery always begetar 2 times
Click to expand...
Click to collapse
You need to use dload..vol up+vol down+power key.
If its going to erecovery, just try to boot to fastboot amd then unlock bootloader even if it is unlocked already
Tutorial please
Sent from my iPhone using Tapatalk
shashank1320 said:
You need to use dload..vol up+vol down+power key.
If its going to erecovery, just try to boot to fastboot amd then unlock bootloader even if it is unlocked already
Click to expand...
Click to collapse
press vol up + vol down I only get the vibration 2 times, and can not get into erecovery
Sent from my iPhone using Tapatalk
Hello
Sent from my iPhone using Tapatalk
hondadeka said:
Hello
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
some body please help me
Sent from my E6553 using Tapatalk