Related
I am starting this thread separately from the locked on S/W and other threads because I have on possibly fatal issue.
I have had an increasingly hard time connecting my locked on S/W screen device to two different computers and having it recognized. I have reinstalled the drivers and constantly restarted the phone, but have reached a point where I just cannot get it connected anymore.
On this issue only - looking for suggestions.
When asking fof help with software you need to provide more detail, os... driver version... detailed error description... screen shots.
In addition its possible the cable itself is causing problems.
slycog said:
When asking fof help with software you need to provide more detail, os... driver version... detailed error description... screen shots.
In addition its possible the cable itself is causing problems.
Click to expand...
Click to collapse
Have tried different cables - no effect. LG Mobile Driver versions tried were 2.2 3.01 and latest - 3.21. Have problems on 32 bit W7 AND XP machines.
No screen shots - was being shown in "My Computer' and connected OK initially - now not at all. I look at Device Manager and there are LG USB and other devices that show up - really has me stumped.
because you havent specified I'm going to assume you're trying to update using the kdz tool, can you post the log?
people have been most successful on XP, do your troubleshooting on that machine. Provide screenshots of the device manager and detail the state of your phone... which recovery you have and what you've done to it.
slycog said:
because you havent specified I'm going to assume you're trying to update using the kdz tool, can you post the log?
people have been most successful on XP, do your troubleshooting on that machine. Provide screenshots of the device manager and detail the state of your phone... which recovery you have and what you've done to it.
Click to expand...
Click to collapse
You want a log from kdz tool - will that show any specifics of the connection problem, or just show that it doesn't? I am back on stock recovery (but still rooted - difference of opinion as to if it matters). Also on stock ROM for the update.
I am trying to connect to the tool. I sometimes just try the LG Updater to see if it connects - no dice. When I was on CWM recovery, I could normally access the device and SD files - it is in the S/W updater mode that I am having all the issues.
At this point, the only reason I am trying to flash with the kdz tool is that it may be only path out of this mess. If I could somehow break out of the S/w Updater screen through another way - would gladly try it.
The kdz tool will work for this if drivers have been properly installed, unfortunately in your case there is a conflict and you haven't provided enough detail to get help....
Post the log and some screenshots of device manager so we can see what's going on.
slycog said:
The kdz tool will work for this if drivers have been properly installed, unfortunately in your case there is a conflict and you haven't provided enough detail to get help....
Post the log and some screenshots of device manager so we can see what's going on.
Click to expand...
Click to collapse
Thanks for your offer to continue to look at this, but it has became too much of a pain and a replacement is due Monday.
The connection went steadily downhill after the S/W Update screen lock. Uninstalled and reinstalled a number of driver versions. If the problem is as I believe with the locked device, there would be no way to access anything.
NVFlash (without the battery in) connects OK, so I have used the one click root to format the internal card, factory wiped the rest (it has froyo on it), and stock recovery is back on. Could not get in to ADB anymore - so could not unroot.
slycog said:
The kdz tool will work for this if drivers have been properly installed, unfortunately in your case there is a conflict and you haven't provided enough detail to get help....
Post the log and some screenshots of device manager so we can see what's going on.
Click to expand...
Click to collapse
Here is a log and mine connects randomly
15:25:33 : [C:\LGMobileUpgrade] Try to delete folder
15:25:33 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
15:25:33 : Start Date : 2011-07-23 15:25:33
15:25:33 : ---------- QM Testmode ---------
15:25:33 : ***** Check Tool Version *****
15:25:33 : Tool version : 1.5.2.0
15:25:33 : UpgradeDLL version : 1.2.5.5
15:25:33 : Current Dir : C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\B2C_Client
15:25:33 : LGE USB Driver Version : 4.9.8.0
15:25:33 : Android PDLV Version :
15:25:33 : Android NDLV Version :
15:25:33 : ******************************************
15:25:33 : [C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone] Try to delete folder
15:25:33 : RemoveDirectory1 Error(2):C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone
15:25:33 : SetEmerModeAT()
15:25:33 : _IsConnectedPhone Call
15:25:41 : _IsConnectedPhone(1)
15:25:41 : 0 - NotConnected.
15:25:41 : 1 - Normal connect success
15:25:41 : 2 - Emergency connect success
15:26:39 : _IsConnectedPhone Call for SmartPhone
15:27:05 : _IsConnectedPhone(0)
15:27:05 : 0 - NotConnected.
15:27:05 : 1 - Normal connect success
15:27:05 : 2 - Emergency connect success
15:27:05 : *****CheckOS Start********
15:27:05 : Microsoft_Windows_XP_Professional_Service Pack 3
15:27:05 : *****CheckPCSyncPrograms Start*****
15:27:06 : PCSyncPrograms Not Found - OK and ready to upgrade
15:27:06 : Checking the connection with the cell phone...
15:27:06 : dwWaitResetTime(40000 ms)
15:27:07 : _IsConnectedPhone Call
15:31:01 : _IsConnectedPhone(1)
15:31:01 : 0 - NotConnected.
15:31:01 : 1 - Normal connect success
15:31:01 : 2 - Emergency connect success
15:31:01 : Phone Mode(1)
15:31:01 : *****GetPhoneType Start*****
15:32:14 : [011,700,147,062,092]Updating is not possible any longer due to a fatal error.\n\n[009,400,102,102,102]Disconnect from and connect the cable into your phone again and remove \nand install the battery and press the [009,700,102,102,102]'Restart'[009,400,102,102,102] button. This will resume the \nupgrade.\n\n\n\n\n\n\n\n\n\n\n\n\nPress the [009,700,102,102,102]Quit[009,400,102,102,102] button to stop the update. (_CheckPhoneType() Error)
15:32:14 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
15:32:14 : Page_Error ºÎºÐÀÔ´Ï´Ù
15:32:14 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
15:32:14 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
BTW I can only get this far using XP in Parallels on a mac otherwise in Win 7 or XP it just locks up
Hi all
About a week ago now I attempted to install a custom ROM (King 3D ROM) Which was going fine until it rebooted and froze on the startup screen. I have tried literally EVERYTHING, and I have had a look around this forum but nothing here seems to work....I also wiped everything off the phone including the OS :-/
So any help would be muchly appreciated!!
Thank you in advance
Scarecrow234
And phone is (obviously) the Lg optimus 3D on Vodafone.
Hi, are you able to get your phone in to debug mode? What recovery methods have you tried?
Hi there, well the only screen I can get into is ClockWorkMod Recovery v5.0.2.0 so no i'm afraid debug mode isn't possible. Is that helpfull?
not bricked. flash a new rom.
is it literally "frozen" or is it stuck on the startup screen with the flashy colors?>
if its just flashy colors then its probably fine. just leave it on for a while and it shall work eventually . its usually slow the first time you flash a ROM onto your phone.
if all else fails try this http://forum.xda-developers.com/showthread.php?t=1287236
The easiest way is to use Recovery Phone through LG Update Tool, under CS tab.
Already attempted to install a new ROM, I tried the stock 2.3.5 ROM but that turned back an error which I cant remember off hand, and kind 3D ROM again but failed aswell.
Well it froze at the "flashy colours" but now it just stays at the lg screen as i wiped the OS off accidently. And I just attempted that but when opening UpTestEX_mod2_marwin.exe it comes up with -This application has failed to start because lgmobileDL.dll was not found. Reinstalling the application may fix this problem.- and I did try downloading it again with no luck.
Okay so LG mobile support tool is now recognising my phone and says start updating but when I click it it gets upto -checking the connection with Cell phone- and then comes up with the error message -Problem with communication between cell phone and PC- does anyone know how to bypass this or anything of the sort?
okay so i managed to open this http://forum.xda-developers.com/showthread.php?t=1287236 on my computer but it comes up with 18:36:27 : [C:\LGMobileUpgrade] Try to delete folder
18:36:27 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
18:36:27 : Start Date : 2012-01-08 18:36:27
18:36:27 : ---------- QM Testmode ---------
18:36:27 : ***** Check Tool Version *****
18:36:27 : Tool version : 1.5.4.7
18:36:27 : UpgradeDLL version : 1.2.6.7
18:36:27 : Current Dir : C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\B2C_Client
18:36:27 : LGE USB Driver Version : 4.9.8.1
18:36:27 : Android PDLV Version :
18:36:27 : Android NDLV Version :
18:36:27 : ******************************************
18:36:27 : [C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone] Try to delete folder
18:36:27 : RemoveDirectory1 Error(2):C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone
18:36:27 : SetEmerModeAT()
18:36:27 : _IsConnectedPhone Call
18:36:33 : _IsConnectedPhone(1)
18:36:33 : 0 - NotConnected.
18:36:33 : 1 - Normal connect success
18:36:33 : 2 - Emergency connect success
18:36:34 : _IsConnectedPhone Call for SmartPhone
18:36:34 : _IsConnectedPhone(0)
18:36:34 : 0 - NotConnected.
18:36:34 : 1 - Normal connect success
18:36:34 : 2 - Emergency connect success
18:36:34 : *****CheckOS Start********
18:36:34 : Microsoft_Windows_XP_Home Edition_Service Pack 3
18:36:34 : *****CheckPCSyncPrograms Start*****
18:36:34 : PCSyncPrograms Not Found - OK and ready to upgrade
18:36:34 : Checking the connection with the cell phone...
18:36:34 : dwWaitResetTime(40000 ms)
18:36:35 : _IsConnectedPhone Call
18:36:41 : _IsConnectedPhone(1)
18:36:41 : 0 - NotConnected.
18:36:41 : 1 - Normal connect success
18:36:41 : 2 - Emergency connect success
18:36:41 : Phone Mode(1)
18:36:41 : *****GetPhoneType Start*****
18:36:41 : [011,700,147,062,092]Updating is not possible any longer due to a fatal error.\n\n[009,400,102,102,102]Disconnect from and connect the cable into your phone again and remove \nand install the battery and press the [009,700,102,102,102]'Restart'[009,400,102,102,102] button. This will resume the \nupgrade.\n\n\n\n\n\n\n\n\n\n\n\n\nPress the [009,700,102,102,102]Quit[009,400,102,102,102] button to stop the update. (_CheckPhoneType() Error)
18:36:41 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
18:36:41 : Page_Error ºÎºÐÀÔ´Ï´Ù
18:36:42 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
18:36:42 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
Any ideas?
scarecrow234 said:
Okay so LG mobile support tool is now recognising my phone and says start updating but when I click it it gets upto -checking the connection with Cell phone- and then comes up with the error message -Problem with communication between cell phone and PC- does anyone know how to bypass this or anything of the sort?
Click to expand...
Click to collapse
OK your phone is fine, you need to just keep at it, LG tool is best option for now, make sure your phone is well charged, remove old version of tool and remove drivers, download new tool and install drivers select windows xp for compatibility.
If all else fails try another pc.
Hi people, all is okay now the http://forum.xda-developers.com/showthread.php?t=1287236 way worked perfectly and my phone is nnow running!!! thank you all for the help!!!!
These steps are mainly directed at how to use the KDZ program to switch your baseband/fixing unknown baseband.
*I have heard this works on Windows Vista/7 but I personally have only been able to accomplish it through Windows XP*; VMWare running XP and XP Mode also work but make sure the USB is consistently being connected to the XP environment (don't jack around outside it) or the process will hang & require you to start over!*
1. You do NOT need to have stock recovery installed for this to work, it will require you to reflash CWM after though - How to NvFlash CWM Recovery
2. If you are not on a stock ROM prior to doing this your phone will get stuck in a boot loop of the stock T-Mobile animation when the process is finished; until you reflash CWM Recovery and restore a backup
Notes:
[While on a custom ROM and Recovery]
I have had the kdz method hang after the baseband flash but before installing the stock ROM & Recovery, leaving everything but the baseband unchanged; this could happen for you but I recommend making an Nandroid still if you care about losing your current data; similar log of how it will appear if this happens: Baseband flash hangup
[Modem causing process to hang]
The process may hang due to the LG Modem driver, disabling and re-enabling it should fix this (Start --> Run --> devmgmt.msc --> Modems --> LGE Android Platform USB Modem --> Disable/Enable)
Needed files:
T-Mobile G2x Android USB Driver - drivers so your computer recognizes phone
V11H_00.kdz | Mirror 1 - data for the June 05 2011 baseband (WIND MOBILE)
V21E_00.kdz | Mirror 1 | Mirror 2 - data for the July 15 2011 baseband
V21Y_00.kdz | Mirror 1 | Mirror 2 - data for the March 11 2012 baseband
KDZ_FW_UPD_EN - software to install the baseband
APX Drivers & NVFlash - driver and software to flash Clockwork Recovery on your phone again
P999 V10F Nandroid - Nandroid of stock 2.2.2/V10F ROM
P999 V21E Nandroid | Mirror 1 | Mirror 2 - Nandroid of the stock 2.3.3/V21E ROM
P999 V21Y Nandroid | Mirror 1 | Mirror 2 - Nandroid of the stock 2.3.4/V21Y ROM
LGMobile Support Tool - Checks if the LG ROM/Baseband is outdated
Call audio fix for V21E Baseband | Mirror 1 - Fix the audio issue during a call with the V21E baseband on a custom ROM
Call audio fix for V21Y Baseband | Mirror 1 - Fix the audio issue during a call with the V21Y baseband on a custom ROM (So you can still be on CM9 nightlies thanks to owain94)
If you're trying to update from the V21E/July 2011 baseband to the V21Y/March 2012 baseband you should only need the LGMobile Support Tool and be on a stock 2.3.3 ROM to get the new baseband.
Download whichever file(s) you need from above; if you've been crack flashing with your computer already you should only need the KDZ program & the V21E/V21Y baseband file
Install the G2X driver onto your computer
Extract the KDZ_FW_UPD_EN archive and right click the "msxml.msi" file and select Install
Next keep your finger held on the Volume Down button of your phone and connect the USB cable to the phone and computer and wait until your phone displays "S/W Upgrade; if your computer says it detected a device it needs a driver for extract the APX/NvFlash zip and navigate the computer to the APX folder for the driver"
Open the "KDZ_FW_UPD.exe" file and click the folder icon to locate the KDZ file
After you have navigated to the KDZ file select it and push "Launch software update"
The log will instantly show:
Code:
15:54:41 : Launching SW update
15:54:41 : Unpacking KDZ
*The program will hang for a minute or two while it is unpacking the file don't worry!*
After you will see some information similar to this:
Code:
15:54:51 : KDZ file extraced
15:55:08 : Files were extracted.
15:55:08 : LGMobileDL Load.
15:55:08 : Port = 4
15:55:08 : Connecting to phone
15:55:20 : Check Phone mode = 1
The program will pause again for a minute and then this will display:
Code:
15:55:57 : Phone type check.......
15:55:57 : LGMobileDL.DLL Loading....
15:55:57 : _SetAuthMark Fail
15:55:57 : AuthMark°¡ Á¤È®È÷ Phone¿¡ Write µÇÁö ¾Ê¾Ò½À´Ï´Ù!
15:55:57 : _SetAuthMark Fail
15:55:57 : LoadCDMAPhoneData() Error
15:55:57 : _DetachDLL Call
15:55:57 : _DetachDLL Call End
15:55:57 : Param : Path = C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\V21E.wdb
15:55:57 : Param : moduleDir =
15:55:57 : Param : waitTime = 33000
15:55:57 : Param : UsbHighSpeed = 0
15:55:57 : Param : PhoneMode = 1
15:55:57 : Param : BinVersion = V21E_00
15:55:57 : Param : AuthMark = 0
15:55:57 : Call fn_StartUpgrade
Last you will hear your USB disconnect/reconnect multiple times while seeing this spammed; this will keep going until the value of "lParam = 100"
Code:
15:56:07 : CDMA: wParam = 2006, lParam = 0
15:56:07 : Model Dll Msg Not Found(2006, 0)
Once the program has reached 100 your phone will reboot displaying the LG Logo and after a few moments it will boot up running the chosen baseband.
About to do this (http://support.lgforum.com/lg/topics/t_mobile_g2x_update_for_sound_quality) to my phone, to update the baseband and in the name of science.
I'll let you know how it goes.
And then, I'll be flashing over RC3 because as per (http://forum.xda-developers.com/showthread.php?t=1679892) it works with the new baseband.
Wait about an hour or two and I'll have something posted.
Maybe...
http://forum.xda-developers.com/showthread.php?t=1287321
or...
http://forum.xda-developers.com/showthread.php?t=1619932
E: 5 Hours later I got it, back on July baseband and phones working, so happy ROFL
xBkKx said:
E: 5 Hours later I got it, back on July baseband and phones working, so happy ROFL
Click to expand...
Click to collapse
Yay! I use a VM of XP too...so much easier
Sent from my LG-P999 using Tapatalk 2
Gotta love XDA's finest. You guys make it hard to actually brick a phone. In the end there will always be a way out of a brick so long as we have XDA developers supporting the device I'm stuck at the S/W Upgrade screen from a failed baseband update using the LG tool and I'm trying this method now. My IParam is scrolling so I'm sure it's doing the job.
Booted and everything's great. It's unfortunate that I restored to a stock ROM and used the LG Tool which failed miserably before using this method instead. I thought this method took more work and look at that, for being hard-headed I ended up having to do more work than I would have had I just done it this way from the beginning.
Lucky me - my "new" replacement phone showed up and I went to work getting it all setup; rooted, ROM loaded, apps and settings - went to make a phone call and experienced what I am assuming to be "the "chirping" sound during a call" cited for the V21Y March 11, 2012 baseband. My settings verified the culprit baseband in question.
I am currently running through TGA_Gunnman's "NANDROID Restore Stock FR 2.22 V10f / GB 2.33 V21e and 2.34 V21y" tutorial to get back to stock and then unroot to follow this one. I am assuming I will need to use the "V21Y_00.kdz - data for the March 11 2012 baseband" but I'm bit unclear on how the "V21Y-BB.Fix.zip" plays into your instructions.
Any assistance would be greatly appreciated. - THX!
That bb fix zip is what owain made, just flash that to fix the chirping noise if you have it, it's so you can be on the new baseband and also a custom ROM
Sent from my LG-P999
That sounds good - I am running into trouble with the update however. I get all the way down through a bunch of the IParams till it hits this one -CDMA: wParam = 2010, IParam = 3035
Model Dll Msg Not Found(2010, 3035)where it just hangs indefinitely. Tried it a few times and have a log saved if that would be of any help. I'm using an actual Windows XP machine (not a VM).
Thoughts?
Edit: Why do I get the sinking feeling I could have just flashed the BB fix to begin with? * sigh *
Is the USB connection staying connected? It disconnected around that on me sometimes and I had to retry, you could also try going into device manager and finding the LG Modem and disabling and re enabling it really quick (if the process hanged at a specific area during the Param spamming session longer than a minute it basically timed out, at least for me)
You said you were on the March baseband so why are you flashing it again? You need to V21E if you're switching. V21E July 15 2011/ V21Y March 11 2012 are the basebands.
You probably did just need to flash the bb fix zip that's why I mainly mentioned that :/ been at work so I'm sorry I haven't been able to be more clear
Sent from my LG-P999
Yeah - I ran the LG tool just to confirm my suspicions... guess I should have done that first. I did quite a bit of searching on the issue before deciding to nuke but didn't find the info spelled out for me (I'm still a rather "step by step" n00b, unfortunately)
It all works out though - The Eaglesblood ROM I was/am using updated since the version I installed Tuesday. It not only included the fix but a sweet install interface that did a lot of the leg work for me! - I am up and running great now! I used Titanium Backup Pro so the setup process wasn't quite so laborious.
Thanks for the help - and responses from work
When I'm doing this to get from 2.3.3 to 2.3.4 for the y21y BB the kdz update will get to the part where it says
15:56:07 : CDMA: wParam = 2006, lParam = 0
15:56:07 : Model Dll Msg Not Found(2006, 0)
But a few seconds later it will give me a runtime error.
Edit:
To be exact this is the full error.
Runtime Error!
Program: ...gs\administrator\desktop\stuff\kdz fw upd\kdz_fw_upd.exe
abnormal program termination
Edit2:
Decided to run VMware and windows xp on my desktop to see if it was just my laptop and lo behold it was something with my laptop.
It is currently installing and will come back to this if anything goes wrong or have in opinions.
Works fine for me. I just downgrade it to July baseband.
USB cable -> make sure you use the original cable from LG.
1st time flashing -> use Nokia cable -> failed -> stuck at Iparam=40++. (CWM is not removed). After reboot. The Phone Shows BB as July and bluetooth for car is working again. (So eventhough its stuck, the BB is already showing as July)
2nd time flashing -> use original LG cable -> works fine until Iparam=100. (CWM is removed when the program completed).
Thanks
I kept getting "mod uptestex mfc has stopped working" with vista. I needed to use VMware to run XP and then I was finally able to get it to downgrade to July 2011. Also once it gets to 100 you need to just unplug the phone because it will continue to bootloop until you install CWM and flash a rom or restore a nandroid. If you are doing this to get Bluetooth working in CM7.2 you will need to reflash 7.2 over your current 7.2 or you will have no call audio.
I am trying to flash v21y using the KDZ_FW_UPD tool
I am getting the error phone not found?
[R&D Test Tools Log File]
04:33:24 : Launching SW update
04:33:24 : Unpacking KDZ
04:33:35 : KDZ file extraced
04:33:38 : Files were extracted.
04:33:38 : LGMobileDL Load.
04:33:52 : Port = 0
04:34:06 : Connecting to phone
04:34:32 : PHONE WAS NOT FOUND!
04:34:34 : ===FINISHED===
vincy24 said:
I am trying to flash v21y using the KDZ_FW_UPD tool
I am getting the error phone not found?
Click to expand...
Click to collapse
In Device Manager under Modems make sure LGE Mobile USB Modem is enabled it will appear in there when the phone is connected and in the S/W Upgrade screen.
I tried this again on a fresh install of XP on my VMWare and it went fine..the KDZ Program should have "Type: CDMA" and "PhoneMode: DIAG" (should be default) as the options also, in case you messed with it.
solution here
http://forum.xda-developers.com/showthread.php?t=1619932
really works with unknown baseband
Dumb enough to get in trouble, smart enough to not make it worse
So, thought I was slick, I'm not, I'm a noob. Tmobile G2x in North America (Dallas, to be exact.) Was running 2.3.4 stock.
Downloaded & installed EAGLESBLOOD™ ICS AOSP [4.0.4]. Unfortunately, despite some thought of "was there a warning about this? I think I saw something somewhere" I did flash the baseband radio during the install.
Phone runs fine now, just have the dreaded click/thump noise and limited data. Can't make calls
Searched and found this thread. Looks like the cure but I'm unclear:
- Do I have to go back to stock (and if so, is there any concensus on which method to follow. I've seen several different threads)
- If I follow this thread, which files do I download/install? When I pull up "About Phone" I have baseband version M6600A-SCAUTNZ-2.0.9720T 1 [Mar 11 2012]
I'm sorry for my ignorance but I thought I'd ask before I install something and only make my problems worse.
Thanks,
Jeff
crosjn said:
So, thought I was slick, I'm not, I'm a noob. Tmobile G2x in North America (Dallas, to be exact.) Was running 2.3.4 stock.
Downloaded & installed EAGLESBLOOD™ ICS AOSP [4.0.4]. Unfortunately, despite some thought of "was there a warning about this? I think I saw something somewhere" I did flash the baseband radio during the install.
Phone runs fine now, just have the dreaded click/thump noise and limited data. Can't make calls
Searched and found this thread. Looks like the cure but I'm unclear:
- Do I have to go back to stock (and if so, is there any concensus on which method to follow. I've seen several different threads)
- If I follow this thread, which files do I download/install? When I pull up "About Phone" I have baseband version M6600A-SCAUTNZ-2.0.9720T 1 [Mar 11 2012]
I'm sorry for my ignorance but I thought I'd ask before I install something and only make my problems worse.
Thanks,
Jeff
Click to expand...
Click to collapse
Flash the rom again and when it gives you the option for baseband, click the 21y option. That'll fix the calling issue.
Sent from my LG-P999 using xda app-developers app
So awesome
Thanks, phone running muy bueno now. And who knew it was that easy to repair!
Many many thanks
LG THRIVE EMERGENCY MODE/BRICK FIX/REVERT TO STOCK v11H Firmware/How to root after unbrick & revert/install CWM
***I want to make a few things completely clear:
1. THIS IS FOR THE LG THRIVE (P506GO) ONLY.
2. I AM NOT RESPONSIBLE FOR FURTHER BRICKING OF YOUR DEVICE (however I have not had any issues and I have done this many times)
3. I do not know where I found this procedure originally, however I have seen it posted around the web a few times. So I cannot actually give credit to anyone because I do not know who i got it from or who came up with it originally, So I apologize.
4. I did not make any of the files.
5. I did this because I am sure there are other people that have spent hours, upon hours, upon hours trying to figure this out, and my wife drives me nuts and I figure other spouces have been driven nuts, so here you go. If you like it, use it, if you dont, then dont.
This procedure will work for ANY LG THRIVE THAT STILL COMES UP IN EMERGENCY MODE, If your phone shows up as a QCUSB_DLOAD or something to that effect in device manager this will not work, This will also work for anyone wanting to fully revert back to stock 2.2.2 v11H. This is also safe to the effect it will not mess up your NV partition (there is another unbrick guide that you run the risk of screwing up your NV and then you wont have cell service after the unbrick).
That being said on with how to do it!
Download these files first
CUSTOM KDZ v11h
LGUnitedMobileDriver_S4981MAN38AP22_ML_WHQL_Ver_3.8.1.exe
LG_KDZ_FW-Update_OfflineFix
Unbrick Solution
1. If your phone is plugged in to the comp, unplug it. Remove the back off the phone and remove battery, do not worry it will be fine. Now set it to the side, we don't need it just yet.
2. Install the LG UNITED MOBILE DRIVER from the file you downloaded.
3. WE ARE NOT INSTALLING ANYTHING ON THIS NEXT STEP THIS IS MERELY TO HELP US ELIMINATE A PROBLEM. If your phone automatically boots into emergency mode then go ahead and plug it in (for those stuck in bootloop or just wanting to revert press and hold back + Volume up and then plug in the usb) and let the drivers install. Once that is done go to Device Manager (Start->run-> type devmgmt.msc and press enter.) expand the modems section and disable (DO NOT UNINSTALL) the LGE USB MODEM (See pic below). It will ask you to restart your computer, DONT.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Disconnect the phone from the computer.
5. Extract the contents of the LG_KDZ_FW-Update_OfflineFix to it's own folder.
6. open the folder to which you extracted those files then open the KDZ_FW_UPD_EN folder
7. XP Users: just double click the KDZ_FW_UPD.exe/Vista,7,8 users right click and run as administrator.
8. Set Type to 3GQCT and PhoneMode to Emergency (others tell you to set it to diag, dont.)
9. Click the little folder with the curved arrow above it to the right of the KDZ file and select the custom_lg_thrive.kdz file you downloaded earlier. Leave the program open.
10 EVERYONE MUST DO THIS STEP EXACTLY WHETHER YOU BOOT AUTOMATICALY INTO EMERGENCY OR NOT! Plug your battery back in, then press and hold the back button + Volume Up + Power. Release ONLY POWER once the thrive starts and then release back and volume up once your in emergency.
11. NOW PLUG YOUR PHONE BACK INTO THE USB!
12. Hit Launch Software update. If it says phone isnt found, first verify the LGE MODEM driver in device manager is still disabled, if it is disconnect phone and then plug it back in without rebooting and hit start upgrade again, it should work this time. IF THE WINDOW FREEZES DO NOT PANIC IF IT GIVES YOU A MESSAGE SAYING ITS FROZEN CLICK WAIT on VISTA/7/8 (on xp it should just revert back, once it does youll see in the dialog box it is flashing let it continue until it says it is complete (Your phone will reboot and you will be at the battery charging screen)
13. WE ARE NOT DONE JUST YET! Now we have to do a Factory(Hard) Reset SO with the device off press and hold the home + volume up + power. release all three once the device boots, let it do its thing. when the device reboots, it will seem to take forever. but it will finally get to the Android setup screen.
Walaa You are back to v11H stock firmware.
How to root after unbrick/revert to stock
1. After you setup your thrive go to settings->Applications and check unknown sources
2. in the same menu click on development and check all three settings in there.
3. Make it easy on yourself and just use the phone browser to come to this thread even easier here is a bit.ly link: http://bit.ly/14EbsSF
4. from your phone browser download the gingerbreak attachment.
5. Install it after its downloaded (if given the unknown sources dialog box refer to step 1
6. Hit Root Device, and let it do its thing, after it reboots, it will be rooted.
Install CWM
1. After rooting via the steps above, open up the play store.
2. In search type Rom Manager and install the Rom Manager from Clockworkmod
3. Open up rom manager and it should prompt you to install Clockworkmod Recovery. Click continue OR click the Flash Recovery button, it will search for your device, but it will pop up for the P500 (old Baseband) SELECT THAT ONE! then click normal install.
4. once it says it is successful go ahead and reboot into recovery via the menu in Rom Manager (allow superuser permissions), to verify that clockworkmod is installed. IT WILL HAVE MESSED UP COLORS, and may come up in the dialog box that an error occurred, THAT IS EXPECTED AND IS OKAY. Use the volume keys to navigate, power to select, and the back key to go back.
There, from this point you should be able to do whatever you want to your thrive that you want. I hope this helps.
Nice work. I have confirmed this method works very well on my thrive.
Thanks for your great work..
yoohath said:
Nice work. I have confirmed this method works very well on my thrive.
Thanks for your great work..
Click to expand...
Click to collapse
Thank you for posting this. I almost threw out the phone because none of the other suggestions seemed to work.
This worked for me, but some critical steps were not mentioned in the post.
My phone was automatically booting into emergency mode. After installing the LG UNITED MOBILE DRIVER, just plugging in the phone (in emergency mode) was not enough. It did not load the drivers, and nothing showed up under modems in Device manager. There seems to be different types of emergency modes. I had to do Back + Volume up + Power and then plug it in to get the phone drivers to install. Once it showed up, I disabled the LG modem.
I also had to install the "msxml.msi" program that you had in the same KDZ_FW_UPD_EN diretcory. Without this, the program was crashing with some error messages (sorry, I didn't write them down).
I also had to run "Windows Enabler.exe" in the same directory. I am not sure what this does, but without it, the program was crashing.
Once I got past all that, at first I thought the program froze because nothing was happening and windows complained that it was "Unresponsive". It took a couple of minutes for some log messages to show up. Once it got going it took about 5 minutes to complete.
Then the first boot took a very long time, around 5 minutes. It seemed stuck on the startup screen, but eventually it took me to the phone initializations etc.. and then it worked fine after that.
This works!!! Period. Surprised the hell outta me!!! I have two P506 that have been stuck in Emergency Mode for a couple years. I've tried countless combinations and KDZ's. It took less than 5 minutes to flash the KDZ per phone. Factory reset, and BAM!!! After about 3 minutes or so was welcomed by the Setup Wizard.
@aestivalisakito
Please add the extra things that were mentioned above by @asarangan to the OP. These are actually critical. I'm running Windows 7 64 bit Pro and KDZ Updater kept crashing without them. I enabled Windows Enabler and installed the XML 4 parser. Drivers were previously installed. Tried again and VOILA!!!!
Thanks again
asarangan said:
Thank you for posting this. I almost threw out the phone because none of the other suggestions seemed to work.
This worked for me, but some critical steps were not mentioned in the post.
My phone was automatically booting into emergency mode. After installing the LG UNITED MOBILE DRIVER, just plugging in the phone (in emergency mode) was not enough. It did not load the drivers, and nothing showed up under modems in Device manager. There seems to be different types of emergency modes. I had to do Back + Volume up + Power and then plug it in to get the phone drivers to install. Once it showed up, I disabled the LG modem.
I also had to install the "msxml.msi" program that you had in the same KDZ_FW_UPD_EN diretcory. Without this, the program was crashing with some error messages (sorry, I didn't write them down).
I also had to run "Windows Enabler.exe" in the same directory. I am not sure what this does, but without it, the program was crashing.
Once I got past all that, at first I thought the program froze because nothing was happening and windows complained that it was "Unresponsive". It took a couple of minutes for some log messages to show up. Once it got going it took about 5 minutes to complete.
Then the first boot took a very long time, around 5 minutes. It seemed stuck on the startup screen, but eventually it took me to the phone initializations etc.. and then it worked fine after that.
Click to expand...
Click to collapse
My pleasure I really want Thrive user (small polulation apart from P500) to have fully use this phone. Now I try to flash 4.4.2 Kitkat and battery drained was like froyo unless SElinus was disable from P505 kernel.
Hey nice thread !! Thanks.
I have a P500, and tried a lot of stuffs with KDZ and LGMDP,
your method is close to all of them with some more details,
that for ex :
10 EVERYONE MUST DO THIS STEP EXACTLY WHETHER YOU BOOT AUTOMATICALY INTO EMERGENCY OR NOT! Plug your battery back in, then press and hold the back button + Volume Up + Power. Release ONLY POWER once the thrive starts and then release back and volume up once your in emergency.
Click to expand...
Click to collapse
I'll try it !! I just think the step by step method is the same with my P500 ...
I, until now, got strange errors with KDZ ("Error upgrade - WPARAM : 100 - LPARAM : 4008") and LGMDP (Error AMSS writing),
have you already encoutered them ??
I'll try it tonight on my P500, with the good Drivers and stock Rom for the P500.
If you think you can help me or has another idea, look at my thread !
http://forum.xda-developers.com/showthread.php?p=49390595
Thanks.
Bestrau.
[23:14:54:328] : =============================================
[23:14:54:328] : Log is started on 13.01.2014, at 23:14:54:328,
executable: C:\***\LG_KDZ_FW-Update_OfflineFix\KDZ_FW_UPD_EN\UpTestEX_mod2_marwin.exe (ProcID: 0x00000b98),
compile time : Dec 8 2010 09:19:37
[23:14:54:328] : Version :
[23:14:54:359] : Get Usb Port
[23:14:54:359] : rsi.strFriendlyName=LGE Android Platform USB Serial Port (COM5)
[23:14:54:359] : FriendlyNameList[iii].szFriendlyName=LGE Android Platform USB Serial Port
[23:14:54:359] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 1 - COM5
[23:14:54:359] : Port = COM5
[23:14:54:390] : UNKNOWN : Req(12) -> Rsp(13)
[23:14:54:406] : UNKNOWN : Req(12) -> Rsp(13)
[23:14:54:421] : UNKNOWN : Req(12) -> Rsp(13)
[23:14:54:421] : >> DIAG_STATUS_F FAILED
[23:14:54:437] : >>Get Model Name [DIAG_VERNO_F]
[23:14:54:453] : BAD CONN MODE : Req(0) -> Rsp(3)
[23:14:54:468] : BAD CONN MODE : Req(0) -> Rsp(3)
[23:14:54:484] : BAD CONN MODE : Req(0) -> Rsp(3)
[23:14:54:500] : BAD CONN MODE : Req(0) -> Rsp(3)
[23:14:54:515] : BAD CONN MODE : Req(0) -> Rsp(3)
[23:14:54:531] : BAD CONN MODE : Req(0) -> Rsp(3)
[23:14:54:531] : FAIL (No Phone)
[23:14:54:531] : GetModelName() Operation Failed Check Diag CMD
[23:14:54:531] : EMERGENCY Booting Mode
[23:14:54:531] : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[23:14:54:546] : BS/P500/7D1\Tom\LOCALS~1\Temp\DZ42.tmp
[23:14:54:546] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 0 - P500
[23:14:54:562] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[23:14:54:562] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[23:14:54:578] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[23:14:54:578] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[23:14:54:593] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[23:14:54:593] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[23:14:54:593] : NV Write Fail : NV ITEM 9028(9028)
[23:14:54:703] : >> GET DLOAD COMM MODE
[23:14:54:718] : [GetCommMode] Communication mode : 2
[23:14:54:734] : Pre Nand Download
[23:14:54:734] : >>Set Trusted Mode [DLOAD_NAND_SEC_MODE] sec_mode = 1 (1=trusted 0=NonTrusted)
[23:14:54:734] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - TRUSTED MODE
[23:14:54:750] : [COM5] >>NandFlashInitWithFile(PARTITION TBL)
[23:14:54:750] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT PARTITION TBL
[23:14:54:875] : ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_TO_SDRAM 3
[23:14:54:875] : [COM0] ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_AMSS 15
[23:14:54:875] : [COM5] >>NandFlashInitWithFile(AMSS MODEM HEADER)
[23:14:54:890] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT AMSS MODEM HEADER
[23:14:54:906] : [COM0] >>Dl_AsyncWrite()
[23:14:54:906] : >> AMSS FLASHING ...
[23:14:54:906] : ¸Þ½ÃÁö º¸³¿ ProgreassiveBar Init wParam TYPE_WPARAM_PROGRESSIVE_POS=5 lParam(pos)=0 nResult=0
[23:14:54:906] : Sending Pkt Seq : 0
[23:14:54:906] : Sending Pkt Seq : 1
[23:14:54:906] : Sending Pkt Seq : 2
[23:14:54:906] : Sending Pkt Seq : 3
[23:14:54:906] : Sending Pkt Seq : 4
[23:14:54:906] : Sending Pkt Seq : 5
[23:14:54:906] : Sending Pkt Seq : 6
[23:14:54:906] : Sending Pkt Seq : 7
[23:14:54:906] : Sending Pkt Seq : 8
[23:14:54:906] : Sending Pkt Seq : 9
[23:14:54:921] : Dl_AsyncWrite - ErrNo(45), Addr(0x00004800), NandErrNo(0x04)
[23:14:54:921] : [COM0] ERROR Dl_AsyncWrite() TYPE_LPARAM_UPGRADE_ERROR_WRITE_TO_FLASH
[23:14:54:921] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - Close Port
[23:14:54:921] : Close Port<<
[23:14:54:921] : TYPE_WPARAM_UPGRADE_ERROR
[23:14:54:921] : ¸Þ½ÃÁö º¸³¿ - TYPE_WPARAM_UPGRADE_ERROR Error Code = 4008
[23:14:54:937] : Log finished
Click to expand...
Click to collapse
It unfortunately didn't work for me ...
Any ideas of what the problem could be ?
@shinobisoft...feels good to have two bricks turn to gold again?
Sent from my LG-P500
Thank you so much for this!! I looked everywhere and tried multiple KDZ files with various computers and settings, but only this worked! Time to get CWM and Kitkat running on this thing. >
Hey guys I will add the aforementioned items to the original post. Sorry I have been away on deployment and have not been able to attend to this or any of my other threads. I'll get back on it
Website signature
Hi everybody,
I’m at a point where I need to get some help…
My story:
I hard bricked my P500 one year ago … I had CM7 on it, and I installed CM10, but had no network,
so I upgraded the baseband, unfortunately it froze in the middle of the upgrade, I took the battery out, and it was the end …
BOUM … No fast boot, no emergency mode anymore … nothing … dead … Impossible to switch it on …
I bought a new one, which is working under CM7. No problem.
(So if it helps to fix the old hard bricked one I have a working P500 under CM7)
I just got the idea to fix the dead one! Because it’s fun, but I’m stuck and need some help.
JTAG reset:
Since it was hard bricked, the only possibility was a JTag reset. I found a nice guy doing it close to my place and it worked!
The phone has been recognized without any problem, the full dump worked without any mistakes, and finally the bootloader has been restored with a RiffBox.
(See attached picture) The phone can now reach the emergency mode again.
Flash original firmware on P500 with KDZ - not successful:
http://forum.xda-developers.com/showthread.php?t=875881
The drivers from LG are installed, I disabled the LG modems,
my computers (xp) sees the phone without any problems.
I tried to flash the original firmware on it with KDZ, which I’m used to do
but this time I get every time an error
"Error upgrade
WPARAM : 100
LPARAM : 4008"
(Logfile attached)
Flash stock rom with LGMDP – not successful:
http://forum.xda-developers.com/showthread.php?t=1324105
Same here, the P500 is recognized by LGMDP,
it seems the IMEI number is not active,
and everytime I flashed a rom, I got an error:
“Error! AMSS writing” (See attached picture)
Flash a custom recovery (CWM) from LGMDP – not successful
http://forum.xda-developers.com/showthread.php?t=1318750
I also tried to flash CWM, LGMDP seems to have installed it, I got a “Download complete” message,
but I cant access the recovery mode. Vol Down +Home + Power On just brings me back to the yellow emergency screen.
I of course checked everywhere online … I have seen sometimes the same errors as mine but no solutions ….
Do, one of you, have a solution? Or know the errors I’m encountering?
Or do you have another way tp get out of the emergency mode?
Thank you for reading and helping me in any way …
Bestrau.
How much did JTAG cost ?
Sent from my GT-I9082 using Tapatalk
Hey akiratoriyama, I read your posts, sorry for your hard bricked ...
It happened to me too, I found a guy in Germany he does it for 18 euro and you have to pay for the shipping.
no signal (baseband fix) : http://forum.xda-developers.com/showthread.php?t=2616412
restore your original rom here: http://forum.xda-developers.com/showthread.php?t=2559363
hit like if i helped..
Same error as usual ...
voltaire23 said:
no signal (baseband fix) : http://forum.xda-developers.com/showthread.php?t=2616412
restore your original rom here: http://forum.xda-developers.com/showthread.php?t=2559363
hit like if i helped..
Click to expand...
Click to collapse
Hi Voltaire,
your proposition is just the same as all the others I tried !
I gave it a try,
but got the same error ...
[11:02:44:461] : =============================================
[11:02:44:461] : Log is started on 19.01.2014, at 11:02:44:461,
executable: C:\Prerequisite\KDZ Updater\KDZ_FW_UPD.exe (ProcID: 0x00000ab0),
compile time : Dec 8 2010 09:19:37
[11:02:44:461] : Version :
[11:02:44:633] : Get Usb Port
[11:02:44:633] : rsi.strFriendlyName=LGE Android Platform USB Serial Port (COM5)
[11:02:44:633] : FriendlyNameList[iii].szFriendlyName=LGE Android Platform USB Serial Port
[11:02:44:633] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 1 - COM5
[11:02:44:633] : Port = COM5
[11:02:44:648] : UNKNOWN : Req(12) -> Rsp(13)
[11:02:44:664] : UNKNOWN : Req(12) -> Rsp(13)
[11:02:44:679] : UNKNOWN : Req(12) -> Rsp(13)
[11:02:44:679] : >> DIAG_STATUS_F FAILED
[11:02:44:695] : >>Get Model Name [DIAG_VERNO_F]
[11:02:44:711] : BAD CONN MODE : Req(0) -> Rsp(3)
[11:02:44:726] : BAD CONN MODE : Req(0) -> Rsp(3)
[11:02:44:742] : BAD CONN MODE : Req(0) -> Rsp(3)
[11:02:44:789] : BAD CONN MODE : Req(0) -> Rsp(3)
[11:02:44:804] : BAD CONN MODE : Req(0) -> Rsp(3)
[11:02:44:820] : BAD CONN MODE : Req(0) -> Rsp(3)
[11:02:44:820] : FAIL (No Phone)
[11:02:44:820] : GetModelName() Operation Failed Check Diag CMD
[11:02:44:820] : EMERGENCY Booting Mode
[11:02:44:820] : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[11:02:44:836] : BS/P500/7D1\LOCALS~1\Temp\DZ10.tmp
[11:02:44:836] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 0 - P500
[11:02:44:851] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[11:02:44:851] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[11:02:44:867] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[11:02:44:867] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[11:02:44:883] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[11:02:44:883] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[11:02:44:883] : NV Write Fail : NV ITEM 9028(9028)
[11:02:44:992] : >> GET DLOAD COMM MODE
[11:02:45:008] : [GetCommMode] Communication mode : 2
[11:02:45:008] : Pre Nand Download
[11:02:45:008] : >>Set Trusted Mode [DLOAD_NAND_SEC_MODE] sec_mode = 1 (1=trusted 0=NonTrusted)
[11:02:45:008] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - TRUSTED MODE
[11:02:45:023] : [COM5] >>NandFlashInitWithFile(PARTITION TBL)
[11:02:45:023] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT PARTITION TBL
[11:02:45:148] : ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_TO_SDRAM 3
[11:02:45:148] : [COM0] ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_AMSS 15
[11:02:45:148] : [COM5] >>NandFlashInitWithFile(AMSS MODEM HEADER)
[11:02:45:148] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT AMSS MODEM HEADER
[11:02:45:164] : [COM0] >>Dl_AsyncWrite()
[11:02:45:164] : >> AMSS FLASHING ...
[11:02:45:164] : ¸Þ½ÃÁö º¸³¿ ProgreassiveBar Init wParam TYPE_WPARAM_PROGRESSIVE_POS=5 lParam(pos)=0 nResult=0
[11:02:45:164] : Sending Pkt Seq : 0
[11:02:45:164] : Sending Pkt Seq : 1
[11:02:45:164] : Sending Pkt Seq : 2
[11:02:45:164] : Sending Pkt Seq : 3
[11:02:45:164] : Sending Pkt Seq : 4
[11:02:45:164] : Sending Pkt Seq : 5
[11:02:45:164] : Sending Pkt Seq : 6
[11:02:45:164] : Sending Pkt Seq : 7
[11:02:45:164] : Sending Pkt Seq : 8
[11:02:45:164] : Sending Pkt Seq : 9
[11:02:45:179] : Dl_AsyncWrite - ErrNo(45), Addr(0x00004800), NandErrNo(0x04)
[11:02:45:179] : [COM0] ERROR Dl_AsyncWrite() TYPE_LPARAM_UPGRADE_ERROR_WRITE_TO_FLASH
[11:02:45:211] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - Close Port
[11:02:45:211] : Close Port<<
[11:02:45:211] : TYPE_WPARAM_UPGRADE_ERROR
[11:02:45:226] : Log finished
Click to expand...
Click to collapse
Any ideas ?
Bestrau said:
Hi Voltaire,
your proposition is just the same as all the others I tried !
I gave it a try,
but got the same error ...
Any ideas ?
Click to expand...
Click to collapse
Well.. thats weird..hmmm did you follow the steps EXACTLY as written??
remove sd card while performing that.. disable lg modem... hmm retry again.. patience..
voltaire23 said:
Well.. thats weird..hmmm did you follow the steps EXACTLY as written??
remove sd card while performing that.. disable lg modem... hmm retry again.. patience..
Click to expand...
Click to collapse
Yes I followed it exactly as written .... I tried a couple of times .... same results ...
Bestrau said:
Yes I followed it exactly as written .... I tried a couple of times .... same results ...
Click to expand...
Click to collapse
Is your Download Mode unlocked????
voltaire23 said:
Is your Download Mode unlocked????
Click to expand...
Click to collapse
The only thing I can do is : enter the Emergency Mode by pressing volume up button + back button together and then plug the usb cable.
Bestrau said:
The only thing I can do is : enter the Emergency Mode by pressing volume up button + back button together and then plug the usb cable.
Click to expand...
Click to collapse
Uhmm..sorry to say but all I can say is try to search in the threads because I know there are other ways besides KDZ.. And you know that KDZ is very lethal mostly on optimus one variants and others...hmm..dont loose hope man..good luck.. GODBLESS.
I should try put the phone in Emergency Mode and start trying the KDZ with a Stock Gingerbread from different sources until it works...
voltaire23 said:
Uhmm..sorry to say but all I can say is try to search in the threads because I know there are other ways besides KDZ.. And you know that KDZ is very lethal mostly on optimus one variants and others...hmm..dont loose hope man..good luck.. GODBLESS.
Click to expand...
Click to collapse
Thank you ...
Too bad nobody has a solution for this "Upgrade Error: WParam: 100 LParam: 4008" on KDZ ...
And as I said in the original thread, I also tried with LGMDP, but I got everytime an "amss writing" error.
Bestrau said:
Thank you ...
Too bad nobody has a solution for this "Upgrade Error: WParam: 100 LParam: 4008" on KDZ ...
And as I said in the original thread, I also tried with LGMDP, but I got everytime an "amss writing" error.
Click to expand...
Click to collapse
No prob. well..you can always press my ""Thanks"" button..haha.
Same problem here((( Did everything but still on LG logo((
Make sure you have the correct KDZ file for your device and download my attachment.
I know for a fact that this KDZ Updater works as it is the exact one I used to restore 2 P506's back to life just a month or so ago. I did this on Windows 7 Professional 64 bit so it should also work for Windows XP.
Do all the usual KDZ stuff. Disable LG Modem in Device Manager, etc. Then follow the directions in the ReadMe.txt in the attached archive. Best of luck!
voltaire23 said:
No prob. well..you can always press my ""Thanks"" button..haha.
Click to expand...
Click to collapse
Your help is appreciated, but asking for people to press the "Thanks" button is defeating the purpose of the "Thanks" button. The "Thanks" meter has no effect on your account and standings here at XDA.
voltaire23 said:
No prob. well..you can always press my ""Thanks"" button..haha.
Click to expand...
Click to collapse
shinobisoft said:
Your help is appreciated, but asking for people to press the "Thanks" button is defeating the purpose of the "Thanks" button. The "Thanks" meter has no effect on your account and standings here at XDA.
Click to expand...
Click to collapse
Look man, it's upsetting to have the phone in Emergency Mode. August last year, my phone got stuck too, tried every program I could and never boot successfully. Took my phone to the store, they said they tried everything but they couldn't make it work. After a couple months with another device I decided to plug my LG P500 in to the computer and see if there was any new program available to flash. Strangely, my phone BOOTED in the stock rom and has been working flawlessly since. What I'm saying is, don't lose hope, this phone is amazing!