I download the last KinkRoot from XDA and after 2 tentative root goes OK.
Applications requiring root access are installed but have problems:
when I run my favorite app: SAMBA I got:
Superuser test failed. make sure You have Superuser 2.3.6.2 app or later.
Also SAMBADROID and CIFS are installed but are not OK
Related
So I'm trying to remove bloat ware from my tab using "titanium backup" but its not getting root access.
So I rerooted my tab with success and rebooted to attempt TB. No luck I read to download "busy box" but got root access denied.
Es file viewer does have permission from super user but that's the only application.
And I set super user to accept all requests but it did nothing.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
theman88 said:
So I'm trying to remove bloat ware from my tab using "titanium backup" but its not getting root access.
So I rerooted my tab with success and rebooted to attempt TB. No luck I read to download "busy box" but got root access denied.
Es file viewer does have permission from super user but that's the only application.
And I set super user to accept all requests but it did nothing.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Click to expand...
Click to collapse
Mine was not working when setting on "accept all requests".
It works only when I have to manually accept on first time.
Update your superuser and reboot, that's what fixed it for me.
i had the same problem with my galaxy nexus after updating from 4.0.1 to 4.0.3 ICS. i had voodoo root keeper, but all the apps were not able to get root as superuser didn't do anything.
updating superuser didn't solve the problem either but using the latest su binary. the su binary update through superuser itself failed (it couldn't get root, haha), hence i downloaded the latest su binary (3.1.3) manually from here http://androidsu.com/superuser/ and copied it over the old su binary (through a terminal app or adb, where root access still worked).
Normally reboot and opening/running the app works. You may try SuperSU alternatively.
For what ever reason rebooting and then switching Super user to promt fixed it. thanks to all for your more than awesome replies!:victory:
Hi at all, I have a problem with this App & Rom, the first time I launch the app LBE Guard ask my if Samba can get Root privilege, so I allow the root acces but the app not work, I get this message:
SuperUSer test faild. make sure you have:
root acces
superuser 2.3.6.2.
SU auth
I don't have superuser but LBE is similar to super user...if I try to install Superuser nothing change!
Currently, we only have root access on these devices. I am currently working on a recovery build, and I have plans for CM7 and CM9 builds in the future. Here's how to consistently and easily get root access on the Tracfone V768G and almost certainly V768 (I have a V768G):
Root
The only functional root exploit I have found is via an obscure Chinese program called VROOT. While there is much speculation in other threads as to the nature of this program (and potential for malware), I have had success with it on multiple occasions where no other tool I tried worked. I have seen no evidence that it installs anything other than its strange app market (as an easily-removable user app!) and a superuser program called KingRoot (as a system app, where it should be). While it appears entirely benign and functional, I personally prefer to use superSU. Therefore, the below instructions will include the removal of KingRoot and installation of SuperSU in its place. It is assumed that you have ZTE's preloaded drivers installed and that you have confirmed adb is working.
Unfortunately, VROOT is a Windows-only application, though it works perfectly in a Windows virtual machine (that's how I use it!).
Download VROOT and the newest SuperSU
Install and run VROOT. It might take more than one try to succeed.
Confirm that KingRoot is installed, and uninstall the 100% Chinese app that is also present. At this point, your device is rooted. You can simply keep KingRoot, but I would advise continuing to install superSU.
Extract "common/Superuser.apk" from the downloaded SuperSU zip and install it on the device via adb or the file manager.
Open SuperSU and grant it root permissions when KingRoot prompts you. Swipe over to the settings pane and select "Switch superuser app".
Follow its instructions. After rebooting the device, simply install SuperSU again, open it, update the su binary when prompted, and select "Install SuperSU inte /system" from the settings pane. You're done!
VROOT installs a app "Superuser.apk" not Kingroot
Hi, thanks for the info.
When I install VROOT via windows, it installs an app called 'Superuser' which I suppose it is to manage root access permissions for other apps. I see no 'KingRoot' app as you mentioned. I only see this 'Superuser' app and a Chinese app.
Either way, this 'Superuser' app appears to not working properly because I am not getting any prompt to either deny or grant root acess to apps like TitaniumBackup or even Root Checker.
I can get root acess via ADB Shell with the su command, but on the phone the 'Superuser' app from VROOT is not prompting me to allow/deny root access.
Any suggestions?? Thanks!!
abmx7 said:
Hi, thanks for the info.
When I install VROOT via windows, it installs an app called 'Superuser' which I suppose it is to manage root access permissions for other apps. I see no 'KingRoot' app as you mentioned. I only see this 'Superuser' app and a Chinese app.
Either way, this 'Superuser' app appears to not working properly because I am not getting any prompt to either deny or grant root acess to apps like TitaniumBackup or even Root Checker.
I can get root acess via ADB Shell with the su command, but on the phone the 'Superuser' app from VROOT is not prompting me to allow/deny root access.
Any suggestions?? Thanks!!
Click to expand...
Click to collapse
I was working on getting a custom recovery,but then I ended up getting a Nexus 4 (and then later a nexus 5) and abandoned it. Ill take another look at it. Now that I dont need the phone its less of an issue if I brick it,so I can be a little more agressive.
Try this thread. This is what worked for my V768
http://forum.xda-developers.com/showthread.php?t=2217810
pflatlyne said:
I was working on getting a custom recovery,but then I ended up getting a Nexus 4 (and then later a nexus 5) and abandoned it. Ill take another look at it. Now that I dont need the phone its less of an issue if I brick it,so I can be a little more agressive.
Try this thread. This is what worked for my V768
http://forum.xda-developers.com/showthread.php?t=2217810
Click to expand...
Click to collapse
anything i can help with getting a recovery working?
ultravioletnanokitty said:
Currently, we only have root access on these devices. I am currently working on a recovery build, and I have plans for CM7 and CM9 builds in the future. Here's how to consistently and easily get root access on the Tracfone V768G and almost certainly V768 (I have a V768G):
Root
The only functional root exploit I have found is via an obscure Chinese program called VROOT. While there is much speculation in other threads as to the nature of this program (and potential for malware), I have had success with it on multiple occasions where no other tool I tried worked. I have seen no evidence that it installs anything other than its strange app market (as an easily-removable user app!) and a superuser program called KingRoot (as a system app, where it should be). While it appears entirely benign and functional, I personally prefer to use superSU. Therefore, the below instructions will include the removal of KingRoot and installation of SuperSU in its place. It is assumed that you have ZTE's preloaded drivers installed and that you have confirmed adb is working.
Unfortunately, VROOT is a Windows-only application, though it works perfectly in a Windows virtual machine (that's how I use it!).
Download VROOT and the newest SuperSU
Install and run VROOT. It might take more than one try to succeed.
Confirm that KingRoot is installed, and uninstall the 100% Chinese app that is also present. At this point, your device is rooted. You can simply keep KingRoot, but I would advise continuing to install superSU.
Extract "common/Superuser.apk" from the downloaded SuperSU zip and install it on the device via adb or the file manager.
Open SuperSU and grant it root permissions when KingRoot prompts you. Swipe over to the settings pane and select "Switch superuser app".
Follow its instructions. After rebooting the device, simply install SuperSU again, open it, update the su binary when prompted, and select "Install SuperSU inte /system" from the settings pane. You're done!
Click to expand...
Click to collapse
Edit: was able to root with kingoroot my bad.
i need a custom recovery for it please
I was able to use Kingoroot for PC to root my Fire HD 10. Updated to the newest Firmware. It would say it was rooted. But, Trying to give permissions and checking with root checker was not successful and said there was no root. I installed SuperSU apk it says the binary is occupied. So I Uninstalled the superuser apk. that was installed by Kingoroot and tried to change the build prop with a root browser text editor and it was successful so apparently it roots but superuser is not working to grant or deny permissions. It automatically grants permissions does not even open up superuser so its kinda dangerous but it is rooted and working. My experience is that kingoroot superuser must be Uninstalled for root to work. I used twrp manager to backup my recovery img., and boot img. I am going to try to build a recovery for it but I'm not In a hurry plus I'm not sure if it will flash afterwards anyways but if you want root, Kingoroot for pc and Uninstalled the kingoroot superuser apk it installs and you will have it
Installed magisk manager installed zip direct (recommended) it bricked the fire. And then I adb sideloaded the update and now I'm back in business reasonably easy to do but I do not recommend magisk at this time .
Going to try xposed next
Couldn't get it to install says it's arm device tries to install and says it's an arm64 device. Plus has to be flashed in recovery and one hasn't been built yet
You can't manage Kingoroot su binary using SuperSU.
If you not install SuperSU su binary, SuperSU apk does not working.
Try this method to install SuperSU su binary.
https://forum.xda-developers.com/showpost.php?p=75242414&postcount=99
erono said:
You can't manage Kingoroot su binary using SuperSU.
If you not install SuperSU su binary, SuperSU apk does not working.
Try this method to install SuperSU su binary.
https://forum.xda-developers.com/showpost.php?p=75242414&postcount=99
Click to expand...
Click to collapse
I installed supersu to find out if it was rooted since the root checker said it was not. the binary error was a confirmation that it was in fact rooted and it doesn't matter what superuser is used it will not allow pop up or apps to draw over other apps so when it's rooted with kingoroot it automatically grants root without a confirmation,as long as the kingoroot super user app is not installed and if SuperSU is kept installed default permission has to be set to grant for root to work. I in fact installed the SuperSU binary through an older version of the apk and it installed but still has no control over denying or granting permissions. Thanks for the advice though. I appreciate your willingness to help me
Joker1716 said:
I was able to use Kingoroot for PC to root my Fire HD 10. Updated to the newest Firmware. It would say it was rooted. But, Trying to give permissions and checking with root checker was not successful and said there was no root. I installed SuperSU apk it says the binary is occupied. So I Uninstalled the superuser apk. that was installed by Kingoroot and tried to change the build prop with a root browser text editor and it was successful so apparently it roots but superuser is not working to grant or deny permissions. It automatically grants permissions does not even open up superuser so its kinda dangerous but it is rooted and working. My experience is that superuser must be Uninstalled for root to work. I used twrp manager to backup my recovery img., and boot img. I am going to try to build a recovery for it but I'm not In a hurry plus I'm not sure if it will flash afterwards anyways but if you want root, Kingoroot for pc and Uninstalled the superuser apk it installs and you will have it
Installed magisk manager installed zip direct (recommended) it bricked the fire. And then I adb sideloaded the update and now I'm back in business reasonably easy to do but I do not recommend magisk at this time .
Going to try xposed next
Click to expand...
Click to collapse
Not trying to insult your intelligence or anything here, but you said newest firmware? Newest Fire firmware? Newest firmware isn't rootable from my understanding.
What firmware were you on when you started the root process?
Also, are you making sure that the Kingoroot "install our extra junk" box isn't checked (not sure that would prevent root success)?
It wouldn't open superuser. superuser should be set to "grant" because of how the Fire works, which it sounds like you are aware of based on your last post. I wouldn't say it's dangerous, per se.
I've followed this guide nearly a dozen times now and I've not run into the issue(s) you're having.
smam1338 said:
Not trying to insult your intelligence or anything here, but you said newest firmware? Newest Fire firmware? Newest firmware isn't rootable from my understanding.
What firmware were you on when you started the root process?
Also, are you making sure that the Kingoroot "install our extra junk" box isn't checked (not sure that would prevent root success)?
It wouldn't open superuser. superuser should be set to "grant" because of how the Fire works, which it sounds like you are aware of based on your last post. I wouldn't say it's dangerous, per se.
I've followed this guide nearly a dozen times now and I've not run into the issue(s) you're having.
Click to expand...
Click to collapse
Prompt dialog not working in amazon fire devices.
erono said:
Prompt dialog not working in amazon fire devices.
Click to expand...
Click to collapse
Set prompt to grant and fixed.
yes. mind doesnt pop up supersu granting notification too
my fire hd 10 is on 5.6.1.0
someone told me it's amazon's own security measure
stevenchun said:
yes. mind doesnt pop up supersu granting notification too
my fire hd 10 is on 5.6.1.0
someone told me it's amazon's own security measure
Click to expand...
Click to collapse
One can try this improvement :
SuperSU access workaround for Fire devices
https://forum.xda-developers.com/hd8-hd10/general/supersu-access-workaround-fire-devices-t3738269
Hi, I rooted my n6p (after unlock of bootloader) using TWRP and flashed Magisk which installed Magisk manager. Many root checkers showed my phone was positively rooted. After that I was using titanium backup as superuser app, it was working fine and other apps also got super user access. But titanium b. has known issues with Magisk.
After titanium backup was denied superuser access a couple of times I tried to uninstall and install tb, but now it just keeps stopping whenever I open it.
I tried using all sorts of superuser apps, root explorers, bash scripts, ads remover etc but ALL of them are "denied superuser rights".
Also other super user apps including tb I install are not detected by Magisk.
Thanks, I'm new here so sorry if I left out any details.
Hi !
Install Magisk module: busybox for Android NDK.
not help :/