I am from India and have Moto G XT1033 Dual Sim Version.
so what i did was - (FOLLOWED THE ROOTING PROCEDURE FROM MODACO superboot tools )
1. I tried to unlock Bootloader via Motorola website and first time i didn't follow proper bootloader unlocking process and tried to root the phone while it was "LOCKED STATUS 0".This gave error Device loked and "cmd".
2. Then i noticed mistake and unlocked bootloader successfully and STATUS was "UNLOCKED " in bootloader.
3. Then i rebooted and again booted into bootloader and then began process and it on the phone screen said something like "Booting" or "cmd" i dont remember actually and then some stripes with BLACK SCREEN and faded colours were there so as told in tutorial , i long pressed power button and rebooted it But after that nothing happened as told in guide and no "SU" or SuperUser app was there.
ALSO the command prompt on pc screen ended the process saying like "Failed"
4. Now when i check with some root checking apps , they all tell me device is not rooted. also from google play store , i installed superuser and it tells no SU binaries found.
CONCERNS ARE -
1 Should i begin the whole rooting process again ? will it mess it up further ? can my device get bricked ?
2 In Recovery option in Bootloader there is a BOT laying down with RED exclamation mark. what is this ?
3 Have i customized my ROM and firmware?
4 How do i get Rooted ?
5 How to get stock firmware/ROM back ?
6 Please help me find my stock firmware for my Indian XT1033 Dual Sim version.
My device after this has slow download speeds like 2mb app is taking 10 minutes or so .
pratmodi said:
I am from India and have Moto G XT1033 Dual Sim Version.
so what i did was - (FOLLOWED THE ROOTING PROCEDURE FROM MODACO superboot tools )
1. I tried to unlock Bootloader via Motorola website and first time i didn't follow proper bootloader unlocking process and tried to root the phone while it was "LOCKED STATUS 0".This gave error Device loked and "cmd".
2. Then i noticed mistake and unlocked bootloader successfully and STATUS was "UNLOCKED " in bootloader.
3. Then i rebooted and again booted into bootloader and then began process and it on the phone screen said something like "Booting" or "cmd" i dont remember actually and then some stripes with BLACK SCREEN and faded colours were there so as told in tutorial , i long pressed power button and rebooted it But after that nothing happened as told in guide and no "SU" or SuperUser app was there.
ALSO the command prompt on pc screen ended the process saying like "Failed"
4. Now when i check with some root checking apps , they all tell me device is not rooted. also from google play store , i installed superuser and it tells no SU binaries found.
CONCERNS ARE -
1 Should i begin the whole rooting process again ? will it mess it up further ? can my device get bricked ?
2 In Recovery option in Bootloader there is a BOT laying down with RED exclamation mark. what is this ?
3 Have i customized my ROM and firmware?
4 How do i get Rooted ?
5 How to get stock firmware/ROM back ?
6 Please help me find my stock firmware for my Indian XT1033 Dual Sim version.
My device after this has slow download speeds like 2mb app is taking 10 minutes or so .
Click to expand...
Click to collapse
try framaroot
theonecallednick said:
try framaroot
Click to expand...
Click to collapse
This thread is too old. I rooted it already.
Thanks but can u tell me how to unroot moto g ??? I rooted it using following procedure -
http://forum.xda-developers.com/showthread.php?t=2684234
Hire can I safely unroot ??
pratmodi said:
This thread is too old. I rooted it already.
Thanks but can u tell me how to unroot moto g ??? I rooted it using following procedure -
http://forum.xda-developers.com/showthread.php?t=2684234
Hire can I safely unroot ??
Click to expand...
Click to collapse
check this post out for unrooting and restoring back your stock firmware.. http://forum.xda-developers.com/showthread.php?t=2542219
Hey guys, I recently got a Redmi Note, and decided to root it, as I've seen many good things come out of rooted phones. I didn't have access to a computer at the time, so I used Kingroot to root the Note. (I can't read Chinese, so I can't really tell what it did.) And success, it was rooted. Soon, an OTA update came and I decided to download and install it. It booted up fine, but apps kept crashing (incl Kingroot) and I couldn't even get to the landing page/homescreen. I searched up the internet to try and load a fresh stock rom into it, cause I wanted to unroot the phone. (and still do) I tried using the Mi PC suite and load the stock rom into it, but it got stuck at sending userdata.img, and now I'm stuck at the Mi.com logo. (There's no powered by android sign at the bottom.) I've tried getting into recovery, but whenever I press vol down + power button, it takes me straight to fastboot.
TL;DR: I was an idiot and downloaded an OTA update onto my Redmi Note that was rooted via Kingroot running a stock rom. Tried to use Mi PC suite to load the stock rom onto it, but got stuck at userdata.img, and got it into a bootloop. Seek to unroot it and start afresh with a stock rom.
Hi, thank you for using XDA Assist. The best palce to get help for your device in it's specific forum here, http://forum.xda-developers.com/redmi-note They are the experts on your device and should be able to help you.
Leagoo Elite 1 Root/TWRP/SuperUser
I give no guarantee for this to work and take no responsibility for any damage you do to your phone, I have this working 100% on my Leagoo Elite 1 that shipped with version 1013 of firmware.
Installed from Windows 7, I make no claims on other versions of Windows.
REQUIREMENTS:
Functioning brain
ADB Installed correctly (Guides on XDA)
VCOM Drivers (Comes with SP Flash Tool)
SP Flash Tool ( http://spflashtool.com/ )
Stock Rom ( http://www.needrom.com/download/leagoo-elite-1/ )
TWRP Recovery from this post ( http://forum.xda-developers.com/showpost.php?p=63692847&postcount=85 ) (Thanks to yankeeboy)
KingoRoot ( https://www.kingoapp.com/ )
----------------------------------------------------------------------------------------------------------------------------
GUIDE:
Firstly, BACKUP EVERYTHING YOU DO NOT WANT TO LOSE!!!
Flashing any rom will wipe all data from the phone. If there is anything you want to keep, take note of it now and back it all up! If you do not know how to do this, either turn back now, or go find a guide for it.
MAKE SURE YOUR PHONE IS AT LEAST 60% CHARGED SO IT DOES NOT DIE AND BRICK ITSELF WHILE FLASHING
Step 1 - Install/extract all programs mentioned above (ADB, VCOM, SP Flash, KingoRoot) and download Stock Rom and TWRP Recovery. Extract stock rom and twrp recovery from their zip/rar into their own folders.
Step 2 - SETTING UP FOR ROOT
-Open up Sp Flash Tool (flash_tool.exe(run as admin to be safe if applicable))
-Click download tab up the top
-Click Scatter-Loading button
-Navigate to "MT6753_Android_scatter.txt" in the extracted ROM folder
-All sections in the table should fill out with files (If they don't, ensure the rom was extracted properly)
-Turn off your Leagoo Elite 1, disconnect from PC if currently connected and hit the big Download button on SP Flash Tool
-Connect your phone and DO NOT TOUCH ANYTHING UNTIL A GREEN TICK COMES UP FROM SP FLASH TOOL
-Close SP Flash Tool and disconnect phone from PC
-Boot into Android to make sure all is well
Step 3 - PUSHING TWRP RECOVERY TO PHONE
-Open up SP Flash Tool again and it should load up the previous scatter file (If not, simply navigate to the same txt file mentioned in the last section)
-Uncheck all the boxes to make sure you don't reflash the whole Rom
-Click the box underneath LOCATION and across from RECOVERY
-Navigate to the "recovery.img" extracted from the TWRP zip/rar
-Double check the recovery box is the only one checked
-Turn off your Leagoo Elite 1, disconnect from PC if currently connected and hit the big Download button on SP Flash Tool
-Connect your phone and DO NOT TOUCH ANYTHING UNTIL A GREEN TICK COMES UP FROM SP FLASH TOOL
-Close SP Flash Tool and disconnect phone from PC
-Boot into Recovery (Volume Up + Power) to make sure all is well
-Set language if required and reboot back to system (DO NOT INSTALL SUPERSU IF IT ASKS FROM HERE)
Congratulations you now have TWRP Recovery.
Step 4 - ROOT WITH KINGO ROOT
-Connect phone to PC
-Go to phone settings, "General Setting", "About Phone", Tap "Build Number" until it says you are now a developer
-Hit back, go to Developer Options, Turn on USB Debugging and go back to home screen
-Run Kingo Root on PC
-Kingo Root should detect your phone accurately and tell you what to do from here to finish the root
-Wait potentially a VERY long time for everything to install depending on your PC/Internet connection
-If you see a blue app with a tick on your phone screen, then root is good!
-Go to your phone dialer and dial *#*#3646633#*#*
-Swipe right to the "Log and Debugging" tab
-Tap User2Root then Root
-Get "BusyBox" app from Play Store and install busybox (this may not be 100% necessary but makes sure all is installed correctly)
Phone is now rooted, check with any root checker if desired
----------------------------------------------------------------------------------------------------------------------------
From here it is easy to do anything like install Xposed framework and mads etc.
For the Leagoo Elite 1 you will want this version of the framework or a later update of the SDK 22/ARM64 version http://dl-xda.xposed.info/framework/sdk22/arm64/xposed-v86-sdk22-arm64.zip
Just flash using Flash Fire, there are many tutorials for how to do this.
hello, i own a leagoo elite 1 and theres a virus (downloaded via playstore, and grand permitted by mistake) . i used custom recovery to wipe everything, format, flash new rom , etc and virus is still there every time i boot. its a clock wallpaper that comes up and dont let you use touch screen or see behind it.
any idea how to get off this thing?
(i dont even know its name,and no antivirus can even notice it. it was installed as an unroot app via playstore
thanks
Hey mate, sounds like it has made its way into your recovery and is getting through that way. Have you tried using SP Flash Tool to flash a stock rom and stock recovery?
If that doesn't work, or you have tried that already, see if you can reroot, and then freeze the app with Ice Box off the Play Store.
Hope that helps.
hi, thanks for your reply.
i can root , ive done this many times afrer flashing new firmware (stock with stock recovery) to check if virus might be removed, but the main thing is that i dont know the name of virus to remove, or to change its permissions.
i download an unroot tool via playstore. by mistake i gave su permission, and then the phone reboot and stuck in leagoo logo.
after i flash again stock firmware, the virus is always there but i cannot see any app that seems to be the virus....
i root many times via kingoroot without any custom recovery or flashing su via fastboot.
i also yesterday flash custom recovery, and wipe system, and almost everything, but when flashing stock firmware , virus is there.
is there any custom firmware to try?
thanks
---------- Post added at 10:56 AM ---------- Previous post was at 10:46 AM ----------
could you please upload system folders , priv apps folders screenshots (or any screen**** you might think virus might be located, so i can check with my leagoo folders?
please refer to your firmware version so i flash the same and then check.
thanks
Hmmm without knowing which app from the Play Store it was that did this, I don't think I'll be able to help much. If a full flash (system/data/recovery/everything) and wiping dalvik cache etc. hasn't stopped it I'm at a loss for what to do. If you can, try and find the name of the app and I'll look into it
I am using the ROM stated in my guide from NeedRom "X5601_OTD_ELITE_5365U_V1.3.1_S1019-s7yler" direct link to download here: Leagoo Elite 1 ROM V1.3.1 S1019
Try flashing this rom in full if this isn't the one you were using. It works 100% on my phone, no issues at all since install.
i used an "unroot" app (there are two in playstore that comments say that bricked phone) it might be one of them, but theres no unroot app in my phone. its hidden i think...
the rom that you use is a custom one? i have to try a custom one to see if something fix this thing.
i wipe everything, i resize, change format to sd, internal sd, system etc, but its still there.
the only thing that i see in recovery after wipe system, is that i have 3 mb used in system after format system and wipe system. well is there a way to format system via adb ..?
im suspicious about theese three megabytes...
thanks
first of all thank u for instructions on how to instal custom recovery
few months ago i was able to root my phone with kingroot,tried 2 or 3 times before succes
then i did unroot because phone display died and i didnt want to mess with guarantee so i unrooted phone, now when it came back from fixing i didnt manage to root with kingroot even with desktop version, i did everything like u said in instructions and everything is ok but when i try to root, on 75% phone restarts and i get message root failed, i noticed that kingroot app doesnt recognize my phone when i connect it as usb storage but only as mtp device, could that be a problem?
and yeah i managed one time to gain root access when phone restarted, kingo finished his job to 100% and said that it have root access now but when i restart phone it gets stuck on leagoo screen and wont boot.
i entered recovery to try clearind dalvik/cache, phone opened me stock recovery (i flashed philz and it was working when i checked for success) is there anyone who had this issue and how can i fix it, i really need root because of things like cpu control,battery consumption is really big on stand by
for 2400mah battery even a clock is big consumptor
cheers
Edit: cause i did this process few times im not sure that i did that thing with phone dialer code, is it crucial for this. i didnt think it is cause first time i rooted my phone i didnt know about that and it worked for me without it
---------- Post added at 08:16 PM ---------- Previous post was at 07:48 PM ----------
androidenth said:
hi, thanks for your reply.
i can root , ive done this many times afrer flashing new firmware (stock with stock recovery) to check if virus might be removed, but the main thing is that i dont know the name of virus to remove, or to change its permissions.
i download an unroot tool via playstore. by mistake i gave su permission, and then the phone reboot and stuck in leagoo logo.
after i flash again stock firmware, the virus is always there but i cannot see any app that seems to be the virus....
i root many times via kingoroot without any custom recovery or flashing su via fastboot.
i also yesterday flash custom recovery, and wipe system, and almost everything, but when flashing stock firmware , virus is there.
is there any custom firmware to try?
thanks
---------- Post added at 10:56 AM ---------- Previous post was at 10:46 AM ----------
could you please upload system folders , priv apps folders screenshots (or any screen**** you might think virus might be located, so i can check with my leagoo folders?
please refer to your firmware version so i flash the same and then check.
thanks
Click to expand...
Click to collapse
I had similliar issue,I don't know where I downloaded it,app is add contacts.it came out of nowhere when I played game askin g me to install,like when you click on apk file. I found 7 or 8 copies of that apk I cache folder, and deleted them but as soon as I leave that folder new apk appear with same name, later I found two files txt I think,with some numbers and add contact at the end of name and I changed their permission with root explorer, for now I don't have any issues with this app,I can't delete this files but at least I can stop them from working
Anyone else recieved new ota update s160701?
I installed it and still cant get root working without stuck on boot logo, anyone who experience same issue found a working way to root?
skinheadXhc said:
Anyone else recieved new ota update s160701?
I installed it and still cant get root working without stuck on boot logo, anyone who experience same issue found a working way to root?
Click to expand...
Click to collapse
All kind time of day. I apologize in advance for my English. I use a translator. Please help. Some time ago I tried to install root on my phone Leagoo Elite 1. I on XDA forum advised to install the firmware version S1019 I did all the instructions but the phone does not start at all. Not respond to any buttons. I tried to reflash the phone to another firmware version. All versions that I tried just successfully installed but the phone still did not want to run. The only firmware version that ran the phone version S161210. But this version runs very slow. Please give me some advice what should I do?
Hello
I have a leagoo elite 1 and i have a problem with slow charging , i know the phone dosent support fast charge but i dosent mean to charge 3.5 to 4 min 1% , and i want to know if your elite 1 is charging like my elite 1. Any ideas it would help me , and excuse me for my poor englisht but i think you understanding me.
No sound after flashing phone
Hi all,
A couple of days ago I flashed Leagoo Elite 1 with the latest rom. After flashing the phone loudspeaker stopped working. I've downloaded the original rom from Leagoo website (stock rom) and tried to flash the phone again but still don't have sound on loudspeaker.
Just to mention that sound is working when I use the headphones. I guess problem is in problematic firmware.
Any advice how to fix this?
Thanks
I need Help My Lenovo Yoga tab 3 8 inch (850M) was soft bricked after using superSu me to replace kingsu with SuperSU.
After its finish it was working good until i restarted my device it keeps showing black powered screen with nothing even not the floating home,back bar.
Then i`ve tried to boot into recovery and wipe data and factory reset then i restart my device.
and now it stuck at lenovo logo and not showing anything else.
Then I`ve thought i should download stock rom zip and I`ve already downloaded 2 Stock roms from different sites and i put them into SD card then i have tried to flash it after wiping data but
It also stuck in verifying package data while flashing and i`ve waited about 1 hour with nothing new.
Then I have tried to flash it using ADB update, but it keeps telling cancelled
After all of these trials i thought if i replace the recovery by new recovery it`ll work
but I didn`t find how to access download mode in my tab ( the tab has no hard home button) and i `ve tried booting into download mode using ADB but also failed
Then I found a tool called SP Flash Tool but it needs a scatter loading file which i didn`t find !
I donno what else should I do I need help please
aman_a7med said:
I need Help My Lenovo Yoga tab 3 8 inch (850M) was soft bricked after using superSu me to replace kingsu with SuperSU.
After its finish it was working good until i restarted my device it keeps showing black powered screen with nothing even not the floating home,back bar.
Then i`ve tried to boot into recovery and wipe data and factory reset then i restart my device.
and now it stuck at lenovo logo and not showing anything else.
Then I`ve thought i should download stock rom zip and I`ve already downloaded 2 Stock roms from different sites and i put them into SD card then i have tried to flash it after wiping data but
It also stuck in verifying package data while flashing and i`ve waited about 1 hour with nothing new.
Then I have tried to flash it using ADB update, but it keeps telling cancelled
After all of these trials i thought if i replace the recovery by new recovery it`ll work
but I didn`t find how to access download mode in my tab ( the tab has no hard home button) and i `ve tried booting into download mode using ADB but also failed
Then I found a tool called SP Flash Tool but it needs a scatter loading file which i didn`t find !
I donno what else should I do I need help please
Click to expand...
Click to collapse
Greetings!
Thank you for using XDA Assist.
Please consider posting your question in a friendly ask any question thread found here:
http://forum.xda-developers.com/showthread.php?t=2259645
You'll find expert advice there.
Good luck!
I rooted my phone with kingroot and it went well
but when i am using apps like taker,titanium backup,lucky patcher,sdmaid it wont work. they will just go blank screen or they will load forever
i tried reflashing the rom and reroting but it didnt work
the only rooting software that will works on my phone is kingroot and nothing else
i tried to install supersu but the problem appears on that too. the supersu will go to blank screen and forcecloses
i am adding some pics and video link for my problem
https://www.youtube.com/watch?v=A-KOuyoAvDs&t=1s
some one please help me
Acessing the root shell[problem]
there is also a problem
i dont have a custom recovery or a custom root method for my phone
some says that there is no bootloader for my phone
device: LYF flame 1
running android 5.1.1