I've tried multiple tutorials to root my phone but whenever I flash the CWM and restart my phone in recovery mode I still get the default Android recovery screen... What should I do?
If you are using 4.2.2 Use this recovery http://d-h.st/y0b just put it to ODIN on PDA don't extract it. And if you are using 4.1.2 Use k2wl recovery which you can find in this forum this should work.
.
It's working now, but now it says E: Can't mount /sdcard/ .......
Hello, i have same problem and i dont know what iam doing wrong. Btw before i haev rooted many phones and with all was easy, but not with this one. Help me guys. Iam using 4.2.2
Read the forum and use search !!!
When after flashing CWM and restarting your you are getting standard recovery not CWM the when flashing the CWM uncheck Restart in ODIN and let the phone flash the CWM, when it will show succesfull the unplug the phone and restart it, simple as that.
I need a link to root my phone. The above links a dead or virusscanner/firewall go crazy.
Any chance of a working root file for GT-I9105P?
SM-T337A
I tried to root the device and I evidently used the wrong root and it caused the device to not boot. It goes into download mode and recovery mode. I have tried to use odin3 to flash stock firmware and that didn't work after that I used odin3 to flash a .pit and a firmware and that didn't work. Both times it failed. They either said re-partition operation failed or fail (auth).
The binary says custom in odin mode. I am not sure if that voids the warranty as knox and system status are both 0x0 and official. If you need anymore info let me know.
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
"Use the emergency recovery function in the smart switch pc software." With This message you can stil flash rom with odin emergency...= download mod its the same or flash latest twrp recovery go inside recovery connect your phone copy past custom rom flash it ...its not bricked if it says use emergency message its just saying flash me with odin easy
tazaga said:
"Use the emergency recovery function in the smart switch pc software." With This message you can stil flash rom with odin emergency...= download mod its the same or flash latest twrp recovery go inside recovery connect your phone copy past custom rom flash it ...its not bricked if it says use emergency message its just saying flash me with odin easy
Click to expand...
Click to collapse
Out of curiosity and sorry for jumping on your post but I've have not had any response on my thread and my device has been soft bricked for 4 days now.
How can i go about flashing my device if my PC wont recognise my phone. I've tried everything.
What is the situation you have is there any message or can you turn it on or can you recovery mod or download mod ?
Force it into download mode and do it again, worked for me
tazaga said:
What is the situation you have is there any message or can you turn it on or can you recovery mod or download mod ?
Click to expand...
Click to collapse
Hi so I get the message saying " an error occurred while updating the device software. Use the emergency recovery function in the smart switch PC software" however i cannot get my PC to recognise my device. I have tried 6 different cables, 3 different laptops used 3 different ODIN software versions, removed kies removed and installed drivers, been into my laptop BIOS to disable 3.0 usb drivers also done this through the power saving options. Only thing I have not tried is using a 32bit computer. Surely there is a away to get my laptop to recognise this phone as i used this laptop to screw it up in the first place.
I can get it into download mode, but i cannot get it into recovery mode.
The PC shows a message saying "USB device not rocognised. The last USB device you connected to this computer malfunctioned and Windows does not recognise it."
Strepherd said:
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
Click to expand...
Click to collapse
i had similar problem with that message as in thread this thread
try flashing with hidden.img, worked for me but after that i got other problem but at least phone works.
HowJesNo said:
i had similar problem with that message as in thread this thread
try flashing with hidden.img, worked for me but after that i got other problem but at least phone works.
Click to expand...
Click to collapse
Yeah I would just flash it, my issue is it will not connect to the PC. For me to flash it or transfer any image to then internal memory i need to have the laptop recognise my device connected. If i had a removable SD card i could just put TWRP on this and go into recovery but the s6 doesnt have this feature either.
I have no idea what to do. I was hoping someone would have a resolution that i have not yet tried and could get my PC to recognise the phone connected.
does odin recognize phone is connected?
HowJesNo said:
does odin recognize phone is connected?
Click to expand...
Click to collapse
He said no. Please read to understand if you really mean to help someone.
Twydell said:
Yeah I would just flash it, my issue is it will not connect to the PC. For me to flash it or transfer any image to then internal memory i need to have the laptop recognise my device connected. If i had a removable SD card i could just put TWRP on this and go into recovery but the s6 doesnt have this feature either.
I have no idea what to do. I was hoping someone would have a resolution that i have not yet tried and could get my PC to recognise the phone connected.
Click to expand...
Click to collapse
Have you tried usb otg?
Try to delete USB drivers and reboot install them again
That Binary Check problem mostly means you're trying to downgrade the firmware. Look for the latest version from fw.updato.com and flash it.
Strepherd said:
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
Click to expand...
Click to collapse
Haha same thing with me.. its not hard bricked. Flash twrp with odin while that message opens up then a custon rom
Hey guys,I just got that phone and managed to mess it up real good!I tried to flash stock 4.4.4 rom and odin failed at system.now the phone is stuck at emergency mode.I cant install odin to use emergency recovery,it tells me i am not connected to the internet.All stock roms i try to flash fail when odin gets to system.That has as never happened before.any help will be appreciated !
UtokUser said:
Hey guys,I just got that phone and managed to mess it up real good!I tried to flash stock 4.4.4 rom and odin failed at system.now the phone is stuck at emergency mode.I cant install odin to use emergency recovery,it tells me i am not connected to the internet.All stock roms i try to flash fail when odin gets to system.That has as never happened before.any help will be appreciated !
Click to expand...
Click to collapse
It sounds like you need to repartition your phone by flashing a rom with a pit file included. I'm not sure if kies emergency firmware rescue is available for your device as that would have a pit file included. Try asking in this thread here
http://forum.xda-developers.com/android/development/4-4-4-5-1-1-6-0-1-samsung-xcover3-t3465132
Good luck
Sawdoctor
My phone is Samsung Note 4 (SM-N910C) (XFM-N910CXXU2COJ5)
Earlier today i reseted efs using z3,but when i tried to write back the cert file it failed ;
So i decided to download official rom and flash it with odin, but strangely it failed to, and now it its stuck on(Firmware upgrade encountered an issue.Please select recovery mode in kies & try again).
Please i need your help on what to do, am i supposed to repair refs first so that odin could flash the official rom?
Sylar Rebel said:
My phone is Samsung Note 4 (SM-N910C) (XFM-N910CXXU2COJ5)
Earlier today i reseted efs using z3,but when i tried to write back the cert file it failed ;
So i decided to download official rom and flash it with odin, but strangely it failed to, and now it its stuck on(Firmware upgrade encountered an issue.Please select recovery mode in kies & try again).
Please i need your help on what to do, am i supposed to repair refs first so that odin could flash the official rom?
Click to expand...
Click to collapse
Greetings and welcome to assist. Have you tried using kies emergency firmware recovery ? It worked for me on the same device
Good Luck
Sawdoctor