This is an unofficial build of DirtyUnicorns v-11.x for Neuxs 7 (2012).
**Click the above logo to visit the official DirtyUnicorns siteI would say all features are more or less fully working. Cheers!
CLOSEDChange log: :victory:
Code:
Official Gerrit [URL="http://gerrit.dirtyunicorns.com/#/q/status:open"]Change log[/URL]
[COLOR="Blue"]2016/12/12[/COLOR]
- DU v11.0 AOSP 7.1.1_r4 (NMF26O)
- Fix the camera in frameworks
- extra SEPolicy for 7.1.1
- All other fixes from the latest Cabon
[COLOR="Blue"]2016/11/3[/COLOR]
- DU v11.0 AOSP 7.0.0_r14 (NBD90Z)
- MtpDocumentsProvider: Shield the occasional crash when accessing the Document interface
- Enable USB and Bluetooth tethering in Tilapia
- Kernel: DT2W: a more reliable approach
- Kernel: DT2W: Resume power state after a deep sleep
- Healthd: Fix the detection of Charging source
[COLOR="Blue"]2016/10/5[/COLOR]
- DU v11.0 AOSP 7.0.0_r14 (NBD90Z)
- Kerenl: update to the latest DC Android-7.0 source
- PerformanceControl: a few bug fixes
- NFC patch included
- Fix a few bugs in UI (the missing battery QS, etc.)
- Fix the HWcomposer for video playback with HW decoders
- Permissions patches
[COLOR="Blue"]2016/9/18[/COLOR]
- du-11.0-nfc-patch in [URL="http://forum.xda-developers.com/showpost.php?p=68741525&postcount=10"]post#10[/URL]
[COLOR="Blue"]2016/9/17[/COLOR]
- DU v11.0 AOSP 7.0.0_r4 (NRD90S) Initial release
- equiped with the DC-kernel and all performance features are preserved
- Latest PerformanceControl 2.1.6 is included
Know issues:
1. Tegra3 Settings in PerformanceControl might crash at the first launch. It would repair itself afterwards. Fixed
2. Please report
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloads: :highfive:
Hosts: Android File Host Dev-Host mirror: 百度网盘
Gapps: ** We have a 640M system partition. Only have room for pico Gapps.
All those with pico Gapps is recommended. OpenGapps and Banks Gapps are tested
** latest TWRP is recommended.
DU is already rooted.
It is a good habit doing a factory reset after flashing. If you are from earlier version or similar AOSP based ROM, like Omni, you might not need a factory reset. Just wipe cache/dalvik and your current state (apps & data) would be resumed.
When you encounter crashes after flashing, that means the system data is beyond fixed. You need a factory reset to recovery.
Source:
kernel & device trees on Github
Credits: :good:
** The Dirty Unicorns team provide us such a good experience.
** Dmitry Grinbeg for his work making our life easier since MM.
** All those who donate and/or help the developers. Giving us the resources and reason to carry on.
The first 7.0 build on Grouper? Great job. Thanks.
Hi, glad to see one more 7.0 for our devices.
Just 1 questions : is this rom/kernel compatible with F2FS in DATA & CACHE partitions ?
Nice... thank you!
great work another great rom - NFC seems to be missing but love your work so far
I don't know if it bug or not, but sometime I can't do slide to unlock after turning on my device
this is working fantastically. better than AOSP. great work!
I think supporting NFC module is fantastic!
我认为如果在下一版本支持NFC才是极好的！
paasoares said:
Hi, glad to see one more 7.0 for our devices.
Just 1 questions : is this rom/kernel compatible with F2FS in DATA & CACHE partitions ?
Click to expand...
Click to collapse
I just installed it over my freshly formated F2FS data , cache. Installs OK. Issue I find is with MX player gives me component error. But lots if other stuff working great considering its a first release.
Sent from my Nexus 7 using XDA-Developers mobile app
paasoares said:
Hi, glad to see one more 7.0 for our devices.
Just 1 questions : is this rom/kernel compatible with F2FS in DATA & CACHE partitions ?
Click to expand...
Click to collapse
Sure, I think most of the ROMs support F2FS now.
swiftyste said:
great work another great rom - NFC seems to be missing but love your work so far
Click to expand...
Click to collapse
Luvletter520 said:
I think supporting NFC module is fantastic!
我认为如果在下一版本支持NFC才是极好的！
Click to expand...
Click to collapse
DU use NfcNci. I forgot to change that. See if I can make a patch for this later.
Edit: Here is the View attachment du-11.0-nfc-patch-20160918.zip to get NFC back. Works for both Grouper and Tilapia. Cheers!
Camera
Rom fast but camera not working!
Hi,
can you please provide shasum for your rom ?
many thanks for bringing 7 to N7 - 2012
Good Job :good:
Which version of gapps should I use? 6.0 or 7.0?
EDIT: At initial setting, a message saying "Settings keeps stopping"
Installed rom last night (system in EXT4 , CACHE & DATA in F2FS) with no problem
Its fast, never had a FC and everything seems to work except video playback (BSPLAYER has to switch to software mode to be able to play, KODI complains about incompatibility when loading libkodi.so and cant play videos). Tried several players and all fail to play video using hardware decoding.
Antutu gives +/- 24000 !!!!
Great job for the first release
now, if you can give us a video player fix it would be awesome !
Dirty Unicorns on Android N? I thought it was still a WIP. Thanks for the ROM, I hope someone can make a video testing it.
thank you!：D ：手指划线：
I can confirm video/hardware acceleration is messed up/glitchy. In youtube the screen somtimes is blank/black with sound and mx player plus other similar players will not go into hardware acceleration mode but software works fine most of the time. Other than that it has been a solid build. Will post back if i come across any other issues. Thanks for the work Daniel.
I have formatted all partitions as F2FS and installed this ROM with no issues.
Nano Gapps would not install, Pico version installed fine.
No FC upon boot.
One question... Is ParrotMod necessary with this ROM?
Flashed just fine, installed google apps using aroma installer. Works great except google play services is completely unusable, crashing the instant I try to use anything google related.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.
We ask that you do your part to know your device and know how to recover from problems before you flash!
Liquid0624
Deadman96385
jsnweitzel
Somber73
TheBr0ken
CPA-Poke
Cdub50
Code:
Check 2nd Post
Code:
[url="http://goo.gl/Hkh7Kp"]LiquidSmooth v3.0 Full list of features[/URL]
Code:
[url="http://github.com/LiquidSmooth"]LiquidSmooth Github[/URL]
Code:
[B]ROM DOWNLOAD[/B]
GT-I9105: [url="https://s.basketbuild.com/devs/LuK1337/LS/s2ve/"]https://s.basketbuild.com/devs/LuK1337/LS/s2ve/[/URL]
GT-I9105P: [url="https://s.basketbuild.com/devs/LuK1337/LS/s2vep/"]https://s.basketbuild.com/devs/LuK1337/LS/s2vep/[/URL]
[B]GAPPS[/B]
[url="http://forum.xda-developers.com/showthread.php?t=2397942"]Pa Gapps Thread[/URL]
[B]CUSTOM BOOTANIMATION[/B]
[url="http://www.androidfilehost.com/?fid=23329332407590498"]Download Here[/URL]
Please Support Liquid by Donating HERE
XDA:DevDB Information
LiquidSmooth, ROM for the Samsung Galaxy S II Plus
Contributors
LuK1337
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.1.x
ROM Firmware Required: 4.2.2
Based On: LiquidSmooth
Version Information
Status: No Longer Updated
Current Beta Version: 3.1
Beta Release Date: 2014-06-13
Created 2014-07-04
Last Updated 2014-07-12
Bugs
HW Composer not used in landscape
screenrecord does not work
FM Radio does not work (you can use SpiritFM, but I'm not providing support for any problem)
Stock browser does not use hardware acceleration (Please use Google Chrome)
Does not work on 4.1 stock ROM's bootloader, please upgrade to 4.2 before flashing
Not really a bug but bootanimation is not made for our device so will apply oversized (You can fix it by using a custom one)
Changelog Also check About ---> Settings for more
13/06/2014
- Updated LiquidSmooth Sources (based on 4.4.3)
- Fixed vibration feedback
- OTA is broken for now
29/05/2014 (built only for GT-I9105)
- Updated LiquidSmooth Sources
- Fixed GT-I9105 boot
27/05/2014
- Fixed GT-I9105P wifi issues
- Fixed GT-I9105 boot (not tested)
- Now it's flashing MoshKernel in installation process (wifi fix)
25/05/2014
- Updated LiquidSmooth Sources
- Added F2FS support
18/05/2014
- Updated LiquidSmooth Sources
- Fixed sdcard scanning
- Added OTA
14/05/2014 / 15/05/2014
- General changes from LiquidSmooth such as new CM theme engine.
28/04/2014 / 29/04/2014
- initial build
Patches
Patch to system/core for RIL to work: https://gist.github.com/pawitp/5372673.
Patch to hardware/broadcom/libbt for bluetooth to work: https://gist.github.com/pawitp/7891380
Patch to frameworks/native to support legacy binaries: https://gist.github.com/pawitp/7891421
Patch to frameworks/native to workaround hwc issues: http://review.cyanogenmod.org/53162/ and https://gist.github.com/pawitp/7891444
Patch to frameworks/av to fix audio/video issues: https://gist.github.com/pawitp/7945188
Patch to external/chromium_org to workaround hwc issues: https://gist.github.com/pawitp/7910708
Patch to frameworks/base to fix vibration/softkey led handling https://gist.github.com/CoolDevelopment/8622002
Credit
@pawitp
@KINGbabasula
@CoolDevelopment
@beastaki23
@s2+user
@rwaempires
Another great rom from @LuK1337 !!!
Great job
LuK1337 said:
Patches
Patch to system/core for RIL to work: https://gist.github.com/pawitp/5372673.
Patch to hardware/broadcom/libbt for bluetooth to work: https://gist.github.com/pawitp/7891380
Patch to frameworks/native to support legacy binaries: https://gist.github.com/pawitp/7891421
Patch to frameworks/native to workaround hwc issues: http://review.cyanogenmod.org/53162/ and https://gist.github.com/pawitp/7891444
Patch to frameworks/av to fix audio/video issues: https://gist.github.com/pawitp/7945188
Patch to external/chromium_org to workaround hwc issues: https://gist.github.com/pawitp/7910708
Patch to frameworks/base to fix vibration/softkey led handling https://gist.github.com/CoolDevelopment/8622002
Click to expand...
Click to collapse
these patches should be installed? or is optional?
port it to GT-I9105
can you port this to GT-I9105 too?
PORTED
uzgen-uz97 said:
can you port this to GT-I9105 too?
Click to expand...
Click to collapse
I did porting try it...
Mey$aM said:
these patches should be installed? or is optional?
Click to expand...
Click to collapse
They're already included in the rom
uzgen-uz97 said:
can you port this to GT-I9105 too?
Click to expand...
Click to collapse
I'll compile GT-I9105 today
Sent from my GT-I9105P using XDA Premium 4 mobile app
Hi,
first of all thank you for your great work. I tried your ROM a bit and I have to say it runs very well.
For everyone hoping for bluetooth handsfree: it is not working as well here .
GPS fix
Hi LuK1337
Thanks for your port but I had a GPS problem i'm unable to fix it, what can i do?
Thanks.
Uploaded build for GT-I9105
darkhorses said:
Hi LuK1337
Thanks for your port but I had a GPS problem i'm unable to fix it, what can i do?
Thanks.
Click to expand...
Click to collapse
I don't really know why gps isn't working, I've used the almost the same device tree as CoolDevelopment in his CM11. My device tree: https://github.com/luk1337/android_device_samsung_s2vep/tree/liquid so somebody can show me where I made the mistake.
Edit: Run GPSFix for at least 30 minutes and GPS will start working correctly
Nice work. Seems to have same bugs than other KK roms. I liked liquid much with my s3 (r.i.p.)
Gonna test this tonight.
Lähetetty minun GT-I9105P laitteesta Tapatalkilla
Why does Music not appear in apollo? I can play it using the file explorer but else not :/
I did a Full wipe/factory cache, dalvik + format system after trying out some rooms, I like this one the most, and It seems it doesn't give me battery drains, I will try it out, thank you.
PS: and I thought Liquid Smooth is just a name thrown in there but to my surprise that characterize this ROM =d
warface123 said:
Why does Music not appear in apollo? I can play it using the file explorer but else not :/
Click to expand...
Click to collapse
Possible fixes:
- Reboot
- Check music folder for file .nomedia (if exist delete)
- Clear data of Media Storage then reboot
Errors so far I encountered
- often times the ui crashes "unfortunately android system ui had stopped";
- proximity sensor staying on when turning screen off;
- boot animation taking longer time than normal to load;
- had a random reboot.
I switched back to CM, I have to give props to this rom for its fluidity, customization options, and I hope it'll fix some of these important issues cause I want to return in the future.
LuK1337 said:
I don't really know why gps isn't working, I've used the almost the same device tree as CoolDevelopment in his CM11. My device tree: https://github.com/luk1337/android_device_samsung_s2vep/tree/liquid so somebody can show me where I made the mistake.
Edit: Run GPSFix for at least 30 minutes and GPS will start working correctly
Click to expand...
Click to collapse
Thanks for your help, but unfortunately this don't work. I see satellites but i cant connect to them.
Its not a problem with your rom because i just flashed AOSB , RR, and the problem is still here.
Maybe i had to flash another baseband but i don't know were i can found it.
EDIT: Finally all work well on CM11
Banutu said:
- often times the ui crashes "unfortunately android system ui had stopped";
Click to expand...
Click to collapse
Logcat?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About
From the G+ page:: Welcome to Euphoria-OS where you will be in a state of intense excitement and happiness with your device!
My build: This is little side project that might grow into something bigger if time permits. EOS is successor of famous Mahdi ROM. I always wanted to try it, but nobody would do it while we were on KitKat. So here it is, built completely from AOSP sources, using CM device tree.
XDA:DevDB Information
Euphoria-OS Note 3, ROM for the Samsung Galaxy Note 3
Contributors
encho
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2015-04-01
GPL/Sources
Kernel
Device tree
EOS
Created 2015-02-06
Download
ROM
Gapps
Slim gapps
Banks gapps
TK Gapps
Open Gapps
Links
Google+ page
Notes
Superuser built in - go to Developer settings to enable. SuperSu available. Rom uses 400dpi as default, might change that.
Changelog and other stuff here. Some day. Or not.
Changelog (after all)
Euphoria-OS-1.0-hlte-20150205 - first build - beta quality
Euphoria-OS-1.0-hlte-20150306- second build - alpha quality
Euphoria-OS-1.0-hlte-20150309 - third - you know
Euphoria-OS-1.0-hlte-20150313 - beta again
Euphoria-OS-1.0-hlte-20150326 - totally bad build - qcom drivers issues
Euphoria-OS-1.0-hlte-20150401 - there you have it - stable build, if anything in this world can be stable. I'm sure some of you will find something that's broken, I couldn't, lol. Fixed drivers, using EOS sources for everything qcom related. Have I mentioned it is stable?
Euphoria-OS-1.1-hlte-20150415/16 - Euphoria 1.1, based on LP 5.1 - saber/linaro
Euphoria-OS-1.1-hlte-20150422/23 - Euphoria 1.1, LP 5.1.1 linaro/saber
Euphoria-OS-1.1-hlte-20150501 - Euphoria 1.1, LP 5.1.1 linaro, slim camera
Euphoria-OS-1.1-hlte-20150528 - Euphoria 1.1, LP 5.1.1_r3 linaro+archi, arter's bluetooth+audio fixes
Euphoria-OS-1.1-hlte-20150604 - Euphoria 1.1, now hltespr as separate build.
Euphoria-OS-1.1-hlte-20150611 - Mainly stability fixes and upstream changes.
Euphoria-OS-1.1-hlte-20150616 - Upstream changes, navbar, theming and stability fixes. Also includes emergency call fix.
Euphoria-OS-1.1-hlte-20150624 - Upstream changes, includes custom kernel SD card r/w fix. Lots of theme chooser updates and optimizations - Fixed blacklisting private numbers - Merged in translations from CM - Dynamic tiles (ADB, IME selector, Root access, Next alarm)
Euphoria-OS-1.1-hlte-20150703 - Upstream changes,.
Euphoria-OS-1.1-hlte-20150716 - Upstream changes, new kernel. Built with Uber TC.
Euphoria-OS-1.1-hlte-20150803 - Upstream changes
Euphoria-OS-1.1-hlte-20150907 - Upstream changes, theme fixes, stagefright fixes, new features. Includes new kernel based on temasek's.
Euphoria-OS-1.1-hlte-20150918 - Euphoria rebuilt, now with slim kernel.
Euphoria-OS-1.1-hlte-20150925 -Maintenance release, reverting few kernel commits that might cause lags. Compiled with UBERTC 4.8+4.9.
Euphoria-OS-1.1-hlte-20151001 -Upstream changes and fixes.
Euphoria-OS-1.1-hlte-20151012 - Final LP build.
Nice.
Ill update after i test
Glad to see a new ROM here. Compatabilty with the 900T? also maybe some screenshots? I'd be happy to contribute if you need...
kevp75 said:
Nice.
Ill update after i test
Click to expand...
Click to collapse
Got a recommended package of gapps?
tank120 said:
Glad to see a new ROM here. Compatabilty with the 900T? also maybe some screenshots? I'd be happy to contribute if you need...
Click to expand...
Click to collapse
It is universal, all hlte variants. Warning: this is my private testing rom at this stage, no bug reports or feature requests. Well, you can ask, I'll just ignore you.
kevp75 said:
Got a recommended package of gapps?
Click to expand...
Click to collapse
Nope. Just tested it with PA, works fine.
encho said:
Nope. Just tested it with PA, works fine.
Click to expand...
Click to collapse
Thanks bud. Gonna test once downloaded. Probably with lk
kevp75 said:
Thanks bud. Gonna test once downloaded. Probably with lk
Click to expand...
Click to collapse
You never rest, do you?
Have to go now, but before I leave, just a quick reminder:
Superuser built in - go to Developer settings to enable.
Uses 400dpi as default, use texdroider from the store if annoyed.
Thanks
encho said:
You never rest, do you?
Have to go now, but before I leave, just a quick reminder:
Superuser built in - go to Developer settings to enable.
Uses 400dpi as default, use texdroider from the store if annoyed.
Click to expand...
Click to collapse
All day
Had an issue after flashing (systemui fc), but will try again tomorrow. I gotta mod gapps installer anyways.
Wow!!!need to flash this rom
austino pele said:
Wow!!!need to flash this rom
Click to expand...
Click to collapse
Don't, it might be too fast. [emoji41]
full wipe and just installed....got android is upgrading....and when playing music and surf on internet, got gggrrrrrr.....but solved with sound fix from cm11...
rayman95 said:
full wipe and just installed....got android is upgrading....and when playing music and surf on internet, got gggrrrrrr.....but solved with sound fix from cm11...
Click to expand...
Click to collapse
Can you give me example when exactly this happens, I have no such issues.
android is upgrading is arrived just after the reboot after the flash......for the music when I play music and if I run browser when I turn the screen to vertical it's making ggggr noise but resolved with sound patch .
I really do love mahdis works ! Thank you so much for your hard work. And bringing an amazing rom to our device.
Only got my note last week and all I have installed so fast is your work. And loving it to :good:
Thank you so much for your work. Great rom. Thanks encho..
Sent from my hlte using Tapatalk
Thank you all. Can anyone confirm that sounds issue, is it phone variant related?
This is an unofficial build of DirtyUnicorns v-10.x for Neuxs 7 (2012).
**Click the above logo to visit the official DirtyUnicorns siteRelease notes:
2016/9/9
Dirty Unicorns v10.6 Android 6.0.1_r68 (MTC20L). This is the FINAL DU-10.x.
As a bonus, I uploaded the first DU-11.0 for those interested to test... See post #96
2016/8/3
Dirty Unicorns v10.4 Android 6.0.1_r62 (MTC20F).
2016/7/7
This is the Dirty Unicorns v10.3 update.
2016/6/9
Dirty Unicorns merged Android 6.0.1_r46 (MOB30M) now.
2016/5/15
This is the Dirty Unicorns v10.2. DU merged Android 6.0.1_r43 now.
2016/4/29
This is the Dirty Unicorns v10.1. In this build, I modified the settings of activity manager and service. Hoping to improve the overall performance and memory management. The ApkPermission script is updated. Hoping to aware of any combination of flashing. Cheers!
2016/4/16
This is an version update. DU merged Android 6.0.1_r30 now.
HISTORY:
2016/4/6
This is an version update. DU merged Android 6.0.1_r24 now. The native AOSP "Tap to wake" (DT2W) Display settings is implemented. For those who want to use other performance control apks (eg. TricksterMod), you can still enjoy the DT2W feature. Cheers!
Note: Don't enable set on boot of DT2W in PerformanceControl if you want the native AOSP settings to take over.
2016/3/31
The current Gapps have permission issues again. Flash this View attachment gapps-perm-patch.zip after the ROM and Gapps would fix the permission of Gapps at reboot. This patch is universal. If your ROM support init.d, it would work for you too.
Theory: I didn't want to change the original security of AOSP so I put an init.d script to fix the permission at start. It would be the same as the assignment of permission in App settings. The default security and permissions hierarchy is preserved. I think this is the better way.
However, the current growth of ROM and Gapps delay the Package Manager service (which is for permission granting). A wait loop is now added to the script. It would wait for the Package Manage service now.
2016/3/29
NFC apk is missing in DU. I prepared the View attachment du-nfc-patch-20160329.zip. Flash it in recovery will get the NFC back.
2016/3/28
In this build, the Power HAL is adjusted for the O/C frequencies. The latest kernel patch and DT2W adjustments are included. A few bugs are fixed. Cheers!
2016/3/20
The last DU for Tilapia fail to detect the SIM. A library is missing. There is a patch in my Omni6 thread. It would fix this issue.
2016/3/12
I have been building DU for other devices for sometimes. It feels quite good and balance in many ways. I long for the Official (or Unofficial) build too. I tested building DU late last year. There were still some glitches which required quite a few patches so I picked Omni. At that time Omni was comparatively stable. Omni is good but I want to try something new for myself after a few months. I think DU is ready now so its time to kick my slothful ass for a new daily driver. DU is the first (I think) one merging 6.0.1_r22. Cheers!
Note:If you are from Omni (or AOSP based ROM?) like me, you probably don't needed to do factory reset. Just wipe cache/dalvik and your apps current state is most likely preserved.
Change log: :victory:
Code:
Official Gerrit [URL="http://gerrit.dirtyunicorns.com/#/q/status:open"]Change log[/URL]
[COLOR="Blue"]2016/9/9[/COLOR]
- DU v10.6, AOSP 6.0.1_r68 (MTC20L)
- and DU v11.0 AOSP 7.0.0_r4 (NRD90S) alpha test...
[COLOR="Blue"]2016/8/3[/COLOR]
- DU v10.4, AOSP 6.0.1_r62 (MTC20F)
- New set of voltage values for CPU and GPU in kernel
- New boot animation
[COLOR="Blue"]2016/7/7[/COLOR]
- DU v10.3, AOSP 6.0.1_r46 (MOB30M)
[COLOR="Blue"]2016/6/9[/COLOR]
- DU v10.2, AOSP 6.0.1_r46 (MOB30M)
[COLOR="Blue"]2016/5/15[/COLOR]
- DU v10.2, AOSP 6.0.1_r43 (MOB30J)
[COLOR="Blue"]2016/4/29[/COLOR]
- DU v10.1, AOSP 6.0.1_r30 (MOB30D)
- ActivityManager: Modified the settings to improve performance and memory management.
- ApkPermission update, permission would be assigned only once when Gapps is first found.
[COLOR="Blue"]2016/4/16[/COLOR]
- Latest DU source, AOSP 6.0.1_r30 (MOB30D)
[COLOR="Blue"]2016/4/6[/COLOR]
- Latest DU source, AOSP 6.0.1_r24 (MHC19Q)
- Settings: Implement the native AOSP "Tap to wake" (DT2W) settings.
- ApkPermission update, wake for Package Manager start before granting permission
- kernel: Adjust the initial value of DT2W
- Tegra3 Settings: fix a bug in frequency settings
[COLOR="Blue"]2016/3/28[/COLOR]
- Latest DU source, AOSP 6.0.1_r22 (MHC19J)
- Tilapia: Reinstate the missing library for SIM access
- Camera: Fix the crash in video recording. Picture taken still limited to preview quality...
- Power HAL: Adjust with the O/C frequencies
- Power HAL: Add the feature settings. May adopt the built-in DT2W settings later.
- kernel: patches in DT2W
- kernel: New settings for O/C and LP core
- Tegra3 Settings: Fix a bug of potential crash
[COLOR="Blue"]2016/3/12[/COLOR]
- Latest DU source, AOSP 6.0.1_r22 (MHC19J)
- All DU's cool stuffs. Change log for v.10.0 is not yet available.
- All fixes in my [URL="http://forum.xda-developers.com/nexus-7/development/rom-omnirom-6-0-1-homemake-t3282311"]Omni6[/URL]
- kernel: The latest DC-kernel is equipped
- Tegra3 Settings: PerformanceControl v2.1.5 is included
Know issues:
1. Picture taken by built-in Camera limited to preview quality. (Can't connect to the buffer of Camera HAL blob)
2. Please report
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloads: :highfive:
Host: Android File Host mirror: 百度网盘
Gapps: Banks Gapps is included in DU's site but I didn't try it myself.
** We have a 650M system partition. Only have room for pico Gapps.
All those with pico Gapps is recommended. (eg. OpenGapps)
** latest TWRP is recommended.
DU is already rooted.
If you are from Omni (or AOSP based ROM?) like me, you probably don't needed to do factory reset. Just wipe cache/dalvik and your current state (apps) would mostly likely be resumed.
Source:
kernel & device trees on Github
Credits: :good:
** The Dirty Unicorns team provide us such a good experience.
** Dmitry Grinbeg for his work making our life easier.
** All those who donate and/or help the developers. Giving us the resources and reason to carry on.
Hi Daniel, Thanks for the DU build. I haven't gotten around to flashing it yet but from grouper not having any DU Marshmallow builds, now we have 2 unofficial builds. Looks like the other build http://forum.xda-developers.com/nexus-7/orig-development/rom-dirty-unicorns-grouper-edition-t3334912 is from one of the DU team members, @chasmodo.
Just figured I'd let you know. Thanks again.
Mike T
webdroidmt said:
Hi Daniel, Thanks for the DU build. I haven't gotten around to flashing it yet but from grouper not having any DU Marshmallow builds, now we have 2 unofficial builds. Looks like the other build http://forum.xda-developers.com/nexus-7/orig-development/rom-dirty-unicorns-grouper-edition-t3334912 is from one of the DU team members, @chasmodo.
Just figured I'd let you know. Thanks again.
Mike T
Click to expand...
Click to collapse
Really, I didn't know that. I might drop grouper later then. I was thinking this was the first 6.0.1_r22..
Here is the experimental pool I mentioned earlier. I just upload a test kernel with kexec patch and zRAM support. I don't think I would install MultiROM on my Tilapia recently. There are just too many projects in hand.... Anyone want to test it may report to the DC-kernel thread or PM me.
daniel_hk said:
Really, I didn't know that. I might drop grouper later then. I was thinking this was the first 6.0.1_r22..
Here is the experimental pool I mentioned earlier. I just upload a test kernel with kexec patch and zRAM support. I don't think I would install MultiROM on my Tilapia recently. There are just too many projects in hand.... Anyone want to test it may report to the DC-kernel thread or PM me.
Click to expand...
Click to collapse
I didn't know either until this morning. Also, yours was the first build by about 2 hours. LOL I'll test out the kernel with kexec later and let you know. Thanks.
Mike T
It's running great here c Pico open gapps and @parrotgeek1 universal mod. Is running smooth and fast, only camera issue so far. Thanks for building for grouper
Valsorim said:
It's running great here c Pico open gapps and @parrotgeek1 universal mod. Is running smooth and fast, only camera issue so far. Thanks for building for grouper
Click to expand...
Click to collapse
Does camera crash again in Grouper? Or else?
I have fix it in Tilapia. May be I forgot to put it in Grouper...
daniel_hk said:
Does camera crash again in Grouper? Or else?
I have fix it in Tilapia. May be I forgot to put it in Grouper...
Click to expand...
Click to collapse
Takes pic but when look at it in gallery looks distorted, also fc when switch to video
Trying post pic
Perfect, will flash it later as our internet provider is down! And please don't quit support for grouper as YOUR kernel is included and it's flashable with pico gapps... The build from chasmodo is kinda slow... And definitely i want to try the experimental kernel for MultiROM
As stated by @Valsorim, camera app shows distorted pic and video force closes. I installed opencamera.apk and both camera and video work fine. In Performance Control/Advanced Settings, when I tick/untick Force high end graphics, I get a force close but the setting I choose does stick. I've been setting performance at CPU 204/1500Mhz, GPU446Mhz and so far it seems to be pretty good for me with the new kexec patch test kernel.
Overall, cool rom that's working well. Thanks.
Mike T
As promised a small feedback. I've flashed this as secondary in MultiROM. So your test kernel with kexec hardboot patch's working well on Slimkat 9.1 which is primary. I've OC'ed the CPU slightly with 102/1600 Mhz, GPU 486 Mhz... I've used Trickster for the settings as I'm not sure that the performance control app is sticking the settings after reboot. But I'll investigate about. Not to forget i use the parrotgeek-Mod, so i can confirme it's compatible with your DU-build and the test kernel...
Thank you very much, it's my new daily driver
I also installed this with the previously mentioned Parrotgeek Mod. It's an excellent combination. I haven't used my grouper this much in months. Now to start exploring Fling.
Jaloviina said:
... I've used Trickster for the settings as I'm not sure that the performance control app is sticking the settings after reboot. But I'll investigate about...
Click to expand...
Click to collapse
Extracting/Copying the .apk from system and reinstalling did the trick! Performance Control is working now... About a minute after reboot there's is an information that the root access is granted and the settings are sticked... So no Trickster Mod needed anymore ?
But DT2W is still a bit like the fortune wheel!
Daniel, thanks for today's new build! :good:
Mike T
Didn't noticed, thank you!
Jaloviina said:
Didn't noticed, thank you!
Click to expand...
Click to collapse
You're welcome, I've gotten used to Daniel's threads. He generally doesn't make a post for a new release but instead edits the heading of his thread and adds any changelog in his OP. Maybe he wants to see if we're paying attention. LOL
Mike T
I know but wasn't mindful enough...
webdroidmt said:
You're welcome, I've gotten used to Daniel's threads. He generally doesn't make a post for a new release but instead edits the heading of his thread and adds any changelog in his OP. Maybe he wants to see if we're paying attention. LOL
Mike T
Click to expand...
Click to collapse
Jaloviina said:
I know but wasn't mindful enough...
Click to expand...
Click to collapse
I didn't aware that... May be it's time to change...
daniel_hk said:
I didn't aware that... May be it's time to change...
Click to expand...
Click to collapse
Maybe it is time to change. Making a post for a new release has the added advantage of bumping your thread back toward the top of the list.
Fyi, so far new build running with no issues on my grouper except stock video camera is still FC'ing for me. I have been using Open Camera, which works great for me but wanted to test stock camera to see if video was working. Btw, I did a dirty flash over the previous DU build. Maybe a clean flash would fix the stock video camera but since I'm using Open Camera, I didn't bother.
As always, thanks for your excellent work!
Mike T
Hi Daniel, great ROM all OK. I have used your kernel with pure nexus and it is good. Now i have flashed (dirty, wipe system,cache and dalvik) your rom but i dont find NFC option .... Is this a problem DU?? With pure nexus NFC is OK.
Sorry for bad english.
Inviato dal mio Nexus 7 utilizzando Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as Ice Cold Project that started on Desire HD and since then evolved into a mature ROM with the BEST community you can find!!!
Until Lollipop, Rom has always been AOKP based. Unfortunately, since AOKP either stopped development or will make a comeback later this year, we changed our base to CM when it comes to hardware, drivers and some features.
If there are any bugs, either we will sort them or CM team if it concerns their modifications. This rom isn't CM supported so no need to report errors or bugs to them!!
How to Install:
1- BACKUP, BACKUP, BACKUP
2 - Unlock bootloader via fastboot
3 - Flash TWRP
4 - Move Rom & Gapps into internal storage
5 - Full Wipes
6- Flash Rom & Gapps (OPTIONAL)
WORKING:
-All ( ? )
NOT Working:
-SE Linux is Permissive
- You tell me
GPL:
device:
https://github.com/dragonpt/android_device_lenovo_x103f
vendor:
https://github.com/dragonpt/proprietary_vendor_lenovo_x103f
kernel:
https://github.com/dragonpt/android_kernel_lenovo_msm8909
Thanks
@bbelos (all the bring up)
@GartimusPrime
AICP
XDA:DevDB Information
[ROM] [UNOFFICIAL] AICP 12.1 for Lenovo TB-X103F | 7.1.2 , ROM for the Android General
Contributors
superdragonpt, superdragonpt, bbelos,
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: Unlock BL, TWRP
Based On: AICP
Version Information
Status: Beta
Created 2017-08-28
Last Updated 2017-08-27
Small FAQ:
Q: How can i Unlock Bootloader & flash TWRP?
A: Instructions for Unlocking Bootloader & TWRP can be found here
Q: How can i root this rom?
A: You need to flash LineageOS root addon via TWRP, download from here
Choose the Version 14.1 "addonsu-14.1-arm-signed.zip"
--> Then go to Settings > Developer Options > Choose your root access
ROM Downloads are available on XDA DevDB
ChangeLogs
Build: 20170828
First Release
Patch Level: August 2017
Some Kernel tuning
Build: 20170903
Source Sync
Camera: switch to Snap
Fixed AICP Extras Force Closing
Forced WiFi Only config
Some device clean
Build: 20171009
Source Sync (check AICP git for the new changes)
Security Patch Level: October 5
Kernel: Merged several upstream fixs & merged /activated SDCARD_FS
(check new kernel branch on my github for the full changes)
Fixed more issues with AICP Extras (FC's)
Memory optimizations
Other improvements...
DO expect BUGS, this is my first time ever build for this device...
and i only own the device for some hours now -lol-
PS: ROM is uploaded (XDA DevDB) ...
cheers
OT msg: wow it's been long time. Used to get madOS from you and team
nervehammer said:
OT msg: wow it's been long time. Used to get madOS from you and team
Click to expand...
Click to collapse
madOS is optimized for MediaTek SoC's...
So ...won't come anytime soon for this tablet hah
In would rather just do builds of LOS/ whatever other ROM.
And perhaps add some stuff, fixing things...
Cheers
It would be cool if we could eventually get our own device page but I dont think there is enough development yet.
I can't seem to open the AICP extras from the app drawer or settings, it force closes
GartimusPrime said:
I can't seem to open the AICP extras from the app drawer or settings, it force closes
Click to expand...
Click to collapse
Ye
Looking at that
New release is UP
Build: 20170903
Source Sync
Camera: switch to Snap
Fixed AICP Extras Force Closing
Forced WiFi Only config
Some device clean
bbye
Where can I find the download links for this ROM?
NVM - found it.
Looking forward to trying this ROM out.
Do you know if the Amazon Prime Video app works on this ROM? I can't seem to get it to work on the other Lineage OS or Resurection Remix ROMS for this device. The OP couldn't seem to replicate the problem either, but I bought a 2nd one of these tablets with the same problem. (It works fine on the stock ROM, too)
It's fine if you don't have Amazon Prime. If it loads up to the point where you can login, it should be good. It kept closing on me before I got to that point.
I made a post about it here: https://forum.xda-developers.com/general/help/lenovo-tab-tb-x103f-running-lineage-os-t3651611
A logcat file can be found in the last post. Feel free to take a look. I'd appreciate it!
In the meantime, I'll fire up this ROM and see it for myself. Thanks for porting it!
I tested the Amazon Prime app last night. And it doesn't work on AICP, either. I'm at my wit's end on this one. Help, please?
Thanks.
Hybrid Divide said:
I tested the Amazon Prime app last night. And it doesn't work on AICP, either. I'm at my wit's end on this one. Help, please?
Thanks.
Click to expand...
Click to collapse
Have you tried Amazon's new app on the play store? I just watched the first episode of The Tick on my tablet with lineage just fine.
Thank you for your reply! Yeah, I did try the play store version as soon as I heard it was there. Same thing. On two tablets, too.
Not sure if I installed the room wrong, but I'm not new to flashing rooms, and other apps work, even stuff like YouTube.
I'm at my wit's end trying to figure out this puzzle! Thanks again.
Build: 20171009
Source Sync (check AICP git for the new changes)
Security Patch Level: October 5
Kernel: Merged several upstream fixs & merged /activated SDCARD_FS
(check new kernel branch on my github for the full changes)
Fixed more issues with AICP Extras (FC's)
Memory optimizations
Other improvements...
cheers
Sorry if this has been asked before, I did search the thread and couldn't seem to find the answer.
Does this ROM support F2FS? If so, which partitions should be formatted as such?
Thanks in advance.
Hi all,
Any reviews yet? Is there low volume problem like on Lineage?
Thanks.
Edit:
Trying this rom for a week, and can say its very stable, without any noticeable problems. The overall performance is comparable to stock, maybe a bit faster. Volume level with Dolby Atmos installed is ok. Battery is ok after a few days, 0-1% drop after 24h of inactivity. Wifi speed is around 30mbps for me so no problems here too.
The single disagvantage I found - the rom does not support dt2w like stock.
Thank you, @superdragonpt
Edit2:
Found a bug - when wifi scanning off AND wifi automatic turn off is enabled - wifi not working after sleep.
arturkin said:
Hi all,
Any reviews yet? Is there low volume problem like on Lineage?
Thanks.
Edit:
Trying this rom for a week, and can say its very stable, without any noticeable problems. The overall performance is comparable to stock, maybe a bit faster. Volume level with Dolby Atmos installed is ok. Battery is ok after a few days, 0-1% drop after 24h of inactivity. Wifi speed is around 30mbps for me so no problems here too.
The single disagvantage I found - the rom does not support dt2w like stock.
Thank you, @superdragonpt
Edit2:
Found a bug - when wifi scanning off AND wifi automatic turn off is enabled - wifi not working after sleep.
Click to expand...
Click to collapse
Yup just noticed that wlan small bug, thanks
currently trying to do Oreo bringup... not easy as this SOC isn't very popular
cheers
Any update on this ROM or is it dead?
Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Android Open Source Cypher Project
AOSCP Website
AOSCP G+ Community
AOSCP Gerrit/Review
SOURCES
ROM Base : https://github.com/CypherOS
Device Tree : https://github.com/lineageos/android_device_xiaomi_lithium
Device Common : https://github.com/lineageos/android_device_xiaomi_msm8996-common
Device Kernel : https://github.com/heindrix/android_kernel_xiaomi_msm8996
Device Vendor : https://github.com/Mi5Devs/proprietary_vendor_xiaomi
MEMOS
Hardware bringups based on CAF : Audio, Display, Media
DOWNLOADS
sourceforgenet
VERSION
Status : Unofficial Beta
Last Update : 2019-JAN-26 09:40
Notes : Will be updated only when there're new Android Security Updates, Bugs Fixes, New Features, or Tweaks.
CREDITS
* AOSCP
* LineageOS
* TheMuppets
* Mi5Devs
* Ubuntu
FOOTNOTES
If you guys encounter bootloop on fresh flash, don't flash gapps immediately after flash the rom. after you flash the rom, reboot into recovery once again, and after that you can flash the gapps.
[UPDATE]
aoscp_lithium-7.0.0-20181130-unofficial.zip
Changelog :
- cleaning selinux denial
- fixed greyed out USB Preferences options when plug in usb
Question what apps come with it Google Messenger, "Google Phone"? If it is same as LineageOS or other than it is doh. I like if custom rom comes with default google apps where is good you can update from store.
Sent from my MI MIX using Tapatalk
---------- Post added at 01:01 PM ---------- Previous post was at 12:54 PM ----------
And someone can give hint how to backup custom rom and how to restore? I done backup, System, Data and Boot but after restore not bootup.
Sent from my MI MIX using Tapatalk
[UPDATE]
aoscp_lithium-7.0.0-20181207-unofficial.zip
Changelog :
- updated to android-9.0.0_r21
- updated gpu blobs to latest google marlin gpu blobs
- changing kernel to HDRX kernel
- some tweaks to save up more power
- another changelog please see it at gerrit/review site or github trees
If you guys prefer better performance than the default one, just tweak the kernel by yourself using Kernel Adiutor or another app, i've added many features in HDRX kernel so you guys have more options to tweak.
thx will update tomorrow. magisk working. awesome rom.
update - tried the dirty flash but it reboots after 5-10 seconds of system running and getting really hot. Pretty sure it is a kernel issue as I flashed Pepsy and running fine so far.
I will try clean flash on Monday. Oh and that Magisk issue is kernel related. Same problem with Pepsy running.
so many of these but what are the major differences if any? i dont wanna try them all
Is anyone using this at all?
I am. I tried Gzosp but this one is much smoother. Great battery life. Just dont flash the latest version with HDRX kernel - random reboots.
AmokPL said:
I am. I tried Gzosp but this one is much smoother. Great battery life. Just dont flash the latest version with HDRX kernel - random reboots.
Click to expand...
Click to collapse
Yes, i will fix the kernel on the next release.
Very sorry for that.
I tried but issues persist. Launcher errors with recents disappearing and weather not working on at a glance on the home screen. This one seems OK but for now crdroid has the slight edge over this. This is more of a vanilla experience with no customs.
I find this better than CRDroid in terms of smoothness. No lag and stutter. Miss few options from CR like battery percentage inside the icon or advanced restart but i can live without it.
[UPDATE]
aoscp_lithium-7.0.0-20181213-unofficial.zip
Changelog :
- removed fingerprint navigation (for now) that causing several problems (fingerprint navigation is a different thing with fingerprint authentication, the fingerprint authentication is still working and have no problems)
- updated gpu blobs to latest google marlin gpu blobs (this time kanged with the gpu firmware too, not just the blobs)
- updated vulkan blobs to fix blackscreen on dolphin emulator
- updated HDRX Kernel to eliminate random reboots and better power saving
- another changelog please see it at gerrit/review site or github trees
If you guys prefer better performance than the default one, just tweak the kernel by yourself using Kernel Adiutor or another app, i've added many features in HDRX kernel so you guys have more options to tweak.
[UPDATE]
aoscp_lithium-7.0.0-20181221-unofficial.zip
Changelog :
- change default aoscp launcher to luna launcher
- merge with HDRX Kernel v0.5
- add build prop lines for better GPU Performance
- add build prop lines for HAL3/Camera2API
- kang better camera blobs
- make Dual Speaker (main speaker + handset speaker) as default audio profile. when you play music or video, handset speaker will produce sound too
- fixing a couple sepolicy issues
- eliminate hundreds error logs when to reduce resources used and give better smoothness
- another changelog please see it at gerrit/review site or github trees
Merry Christmas!
------------------------------------------------------------------------------------------------
notes : guys, my internet connection down in the middle of uploading the rom. i'll upload it tomorrow, so sorry!
-------------------------------------------------------------------------------------------------------
rom uploaded!
awesome. will flash it as soon as you upload it. thanks!
AmokPL said:
awesome. will flash it as soon as you upload it. thanks!
Click to expand...
Click to collapse
uploaded now
Do you have any instruction of how to flash if I come from Syberia OS?
AmokPL said:
I find this better than CRDroid in terms of smoothness. No lag and stutter. Miss few options from CR like battery percentage inside the icon or advanced restart but i can live without it.
Click to expand...
Click to collapse
Hi there,
For advanced reboot option, you can hold the reboot button and the options will appear.
So this is great, but is there a way I can change navbar layout and invert it?
heindrix said:
Hi there,
For advanced reboot option, you can hold the reboot button and the options will appear.
Click to expand...
Click to collapse
wow thx. didnt think about that
EDIT - installed but it is not as smooth as previous version (kernel?). I will give it a few days and tweak a bit to check.
Do you have any set for kernel adiutor settings or would using the ones you posted on Lineage thread a while ago would be sufficient?
AmokPL said:
wow thx. didnt think about that
EDIT - installed but it is not as smooth as previous version (kernel?). I will give it a few days and tweak a bit to check.
Do you have any set for kernel adiutor settings or would using the ones you posted on Lineage thread a while ago would be sufficient?
Click to expand...
Click to collapse
Hi there,
I use the same settings as the one i posted on LOS thread.
Give it some time and it will become smooth.