Related
I would like to control my ubuntu desktop from the Transformer. Does anyone use RDP or some other service like logmein with ubuntu with an android client?
I've tried Teamviewer, which is great, but the free version disconnects after 5 min.
-J
Have you tried a VNC client? Ubuntu has a VNC server build in (called probably Remote Desktop - you can find and configure it in preferences).
I wish splashtop would put out a Linux client. I'd install unity and use splashtop. That'd be fantastic.
Zach Alt said:
I wish splashtop would put out a Linux client. I'd install unity and use splashtop. That'd be fantastic.
Click to expand...
Click to collapse
I have it installed through WINE but doubt it will work. I installed it for test but didn't have time to really check if it works (or to uninstall even though it starts every time I use WINE and adds an icon to window tray and pisses me off).
I added a request too, but no one probably read it there: http://support-remote.splashtop.com/entries/20010287-ubuntu-version-of-streamer
Have you tried android-vnc-viewer?
PocketCloud works well and there is no time limit. The free version only allows you to add one server though. You need to enable the built in remote sharing in Ubuntu.
tineras said:
PocketCloud works well and there is no time limit. The free version only allows you to add one server though. You need to enable the built in remote sharing in Ubuntu.
Click to expand...
Click to collapse
I use PocketCloud a lot...it works very well.
so i installed xrdp for ubuntu, and can connect with pocketcloud, verified by login sounds, but the screen is blank. no icons or anything. seen mention of this, but havent found a solution. any thoughts?
tineras said:
PocketCloud works well and there is no time limit. The free version only allows you to add one server though. You need to enable the built in remote sharing in Ubuntu.
Click to expand...
Click to collapse
sgbdeals said:
I use PocketCloud a lot...it works very well.
Click to expand...
Click to collapse
I use PocketCloud on my phone without issue, but I cannot use it effectively from the Eee Pad with VNC servers. RDP works fine but VNC doesn't allow me to select the keyboard ever and the mouse pointer is always about a cm to the left of the touch pointer. Been very annoying; since it's a rather expensive app I will surely be pursuing support from Wyse.
did you try holding down the touch pointer thing? I think its designed such that you can still see the pointer when you move via dragging the circle around. Holding down the circle should bring up the menu where you can select the keyboard
Hi,
I'm looking for an app that will allow regular work like:
- Right click
- F5 (or refresh)
- WinKey + R (run)
and etc...
I've tryed 2X and Remote RDP, but none of the support right clicking.
Can anyone suggest anything?
Thx!
SplashTop HD is by far the best RDP app I've used. Haven't used it with a mouse but it works very well with touchscreen (hold for right click).
A slightly older version is included in MyCloud which is already on the tablet, does everything the market app does but hasn't been updated to link you computer via e-mail address for auto lookup off the network.
I used to use Wyse PocketCloud but quickly replaced it when I tried Splashtop.
Yep, SplashTop HD is the best IMO
Splashtop is not really an RDP software.
You need to install a software on the computer that grabs what is on screen and sends that to the tablet.
I use remote rdp, which is real rdp client. Right click is done by clicking and holding. You can even set the screen size of the connection (i use 1280x750) which is perfect for the tablet.
* sigh * Splashtop is the best at what it does.
Phoenix2000 said:
Splashtop is not really an RDP software.
You need to install a software on the computer that grabs what is on screen and sends that to the tablet.
I use remote rdp, which is real rdp client. Right click is done by clicking and holding. You can even set the screen size of the connection (i use 1280x750) which is perfect for the tablet.
Click to expand...
Click to collapse
Ok you have a point there but unless your in a situation where you can't install the streamer on the computer (eg. Server at work ) Splahtop is the best option.
For accessing servers at work I have streamer on my work PC and RPD from there - maybe not as fast as connecting direct but keeps security guys happier
Try PocketCloud Pro
I'm using PocketCloud Pro:
https://market.android.com/details?id=com.wyse.pocketcloudfull&hl=en
It's a true RDP client, and should do everything you're looking for.
PocketCloud Pro, true RDP client, with all the features you asked. Also supports other remote access protocols.
Do any support remote desktop to a Linux box?
My favorite is X2.
But I just got my TF101.
I asked the support to implement right-click an F1F12-keys.
They answered they would discuss this in the next meetings.
This would be really great.
btw: There is an app with supports right-click.
I don't remember the name, but the non-trail-version costs about 17€ and has some disadvantages compared to X2.
I love X2 stays connected in the background.
It seems like most of the major the RDP have some form of "right click" functionality. The issue is you have to usually do some special screen press combo or use a context menu somewhere. This is fine for simple operations but is extremely annoying for trying to do serious work or gaming via RDP.
I'm hoping that either splashtop or PocketCloud will support right click via the touchpad's right click or even better via an external mouse that is plugged in or connected via bluetooth. I hear there is no API to support that at the moment and that is the reason no one implements such a thing.
I'd also really like to have secondary buttons on my mouse work (like depressing the scroll wheel etc...). My dream is to be able to use CAD software remotely or maybe even play a game of L4D. Right now it runs and works, just the mouse implementation prevents you from being efficient and is really frustrating to use.
Maybe when ice cream sanwich comes out, the mouse APIs will be included.
PocketCloud supports Linux remote desktop via vnc.
mrxela said:
PocketCloud supports Linux remote desktop via vnc.
Click to expand...
Click to collapse
Yes it does, but it constantly drop connections.
jwilliamf said:
Yes it does, but it constantly drop connections.
Click to expand...
Click to collapse
I've literally never had a dropped connection. I use PocketCloud all day for work on both windows and linux remote systems. Not saying I don't believe you, just saying I've had a different experience than you.
Pocketcloud is a bit pricey compare to other apps, but it's totally worth it if you use it for business. The on-screen mouse pointer control dial thingy is the best input method I've ever used on a tablet, You can click accurately on the smallest item and see the pointer the whole time, plus it gives you quick access to right-click, the windows key, etc.
Hm, it's really unlikely any app out there is going to support the right click on the transformer dock the way it's configured, but I really want this. Maybe there's a free RDP client out there ripe for modding this functionality in? I don't know how hard it would be.
Actually I use Xtralogic's Remote Desktop and it works PERFECTLY with the dock, including right-click support, and 'hot tracking' the mouse. The ONLY weird thing about it is that you have to double-click-drag, but it's a minor thing...
With Xtralogic's (kinda pricey) app, my TF101 is basically a netbook now, and I couldn't be happier.
msticninja said:
I've literally never had a dropped connection. I use PocketCloud all day for work on both windows and linux remote systems. Not saying I don't believe you, just saying I've had a different experience than you.
Click to expand...
Click to collapse
I used to connect to my ubuntu system but it seem that after 5 to 10 minutes the connection drops. (this using the latest ubuntu distro) Another thing I noticed is that when you do the setup , it only show vpn for mac or windows. either way it connect, but sometime I wonder is that the problem
msticninja said:
Pocketcloud is a bit pricey compare to other apps, but it's totally worth it if you use it for business. The on-screen mouse pointer control dial thingy is the best input method I've ever used on a tablet, You can click accurately on the smallest item and see the pointer the whole time, plus it gives you quick access to right-click, the windows key, etc.
Click to expand...
Click to collapse
Agree on the mouse pointer control dial. that thing is perfect.
Remote RDP should have right click, you may need to check settings? I emailed the guy when the TF first came out, he was able to do it really fast.
right click
First of all thx for sll your replyes, but like someone here said - using combinations is nice but its annoying.
I think that there should some kind of a tweak that you can install on the device that allows the use of right click button everywhere.
Wouldn'tit be nice to use right click features everywhere? Like special functions in the browsre and etc...
I'll be sure to try SplashTop...for now, TeamViewer is my nr. 1.
Hi peoples. I am in seach of the best remote pc app. I have currently tried:
Phonemypc: Which is currently my favorite remote pc app. Navigation is easy and it has a mouse function where you can slide your finger and see the mouse move. Frame rate isnt that great but it has the function to tap into the PC/Laptops camera and view from your mobile device, you can also tap into the mic and listen.
Splashtop HD: I also tried splashtop hd which is very laggy even on fast wifi. The image is alot more crisp, but its just very dificult to use. They claim 30+ fps but I couldnt get it to work that smoothly.
what is everyone else using to control their pcs?
Sent from my Transformer TF101 using Tapatalk
I've used splashtop with very little lag on good WiFi, and even decently on 3G. What's the upload speed on the wifi you are using your PC in?
PhoneMyPC does the job for my needs.
PhonemyPC on my phone, Teamviewer on my tablet.
Remote VNC
I am recommending Teamviewer.
HTML:
http://www.teamviewer.com
Of course on market is version for ANDROID.
I personally connect via VPN and then use the "2X" app to RDP to other servers.... With an external mouse, this combination works perfectly - just like you are sitting in front of a windows box. I use this mainly for support (I'm a unix admin by trade). Now, I never even need to open my laptop for after-hours support! By the time my laptop boots, I could have already got in and fixed the issue from my Transformer!
Wyse pocketcloud is absolutely amazing. I've been using it on my phone and tab for a long time now and never wanted to switch. Also free
Best I have used is Splashtop. I've used VNC, RAdmin, RDP, and X forwarding on various platforms and distances over the years and Splashtop has been the least laggy for me. I've been using the client included with my TF.
Sent from my Transformer TF101 using Tapatalk
Spashtop is nice, but the problem is that you need to install a client on the remote PC.... RDP is nice becuase it's automatically available on all windows systems... If you are only connecting to one PC, I guess that's not a big deal, but for professional use, it's just too much of a pain (and security issue) to install a spashtop client on a bunch of PC's....
I use the Xtralogic RDP client. It's an amazing RDP app that does absolutely everything. I've tried dozens of different RDP apps and Xtralogic beats everything I've tried hands-down. It's a steep price on the market, but I found it for next-to-nothing on a third party app site.
jtrosky said:
Spashtop is nice, but the problem is that you need to install a client on the remote PC.... RDP is nice becuase it's automatically available on all windows systems... If you are only connecting to one PC, I guess that's not a big deal, but for professional use, it's just too much of a pain (and security issue) to install a spashtop client on a bunch of PC's....
Click to expand...
Click to collapse
One of many reasons I use SSH unless I have to interact with a GUI.
Sent from my Transformer TF101 using Tapatalk
Spidey01 said:
One of many reasons I use SSH unless I have to interact with a GUI.
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
Absolutely - I too use SSH for chararacter-based systems... But for Windows, the X2 app (which is free) is an excellent RDP app....
I use VMWare View. It requires you to have two windows server 2008 installations to do so(one as domain controller, and one in the domain).
chatch15117 said:
I use VMWare View. It requires you to have two windows server 2008 installations to do so(one as domain controller, and one in the domain).
Click to expand...
Click to collapse
What are the advantages of VMWare VIew - I've head of it, but don't know much about it - does it only work with VMWare, I'm assuming?
Thanks.
I create an SSH tunnel then connect using Xtralogic.
2x and PocketCloud Remote Desktop using VPN
I´m using 2X or PocketCloud Remote, which are working both flawlessly to connect to my Win 7 Desktop (when FW is disabled, eventhough exception for TCP 3389 is konfigured), using WLAN.
I´d like to use the apps, when i´m home by VPN (like jtrosky) but in this case, traffic from PocketCloud isn´t even arriving at my ethernet port, whereas traffic from 2X does, but the connection doesn´t establish.
Tracing on the Ethernetport on my PC with Wireshark, i see a TCP SYN-packet comming in from my Transformer, followed by a TCP connection reset-packet (RST ACK) from my PC, where there sould be SYN ACK-Packet. So the TCP 3-way-handshake doesn´t work out.
FW and other security stuff is disabled. Access to my NAS is no problem, so VPN should be the root of evil.
Anybody any ideas?
pcap-dumps attached.
THANKS!
For what it's worth, I'm going to change my RDP-app recommendation from 2X to Jump Desktop... I didn't think you could get any better than 2X (it is a great app), but Jump Desktop is even better! I *love* the fact that I can basically RDP to my remote server without even connecting to my VPN at all! It allows you to connect via the internet - as long as you load a "helper" app on the PC(s) that you want to connect to.
Works GREAT - it is now my go to app for remote connectivity!
Sent from my Transformer TF101 using Tapatalk 2
Thank you for your "real-time"-reply
It allows you to connect via the internet - as long as you load a "helper" app on the PC(s) that you want to connect to.
Click to expand...
Click to collapse
That means, that you open a port on your router / FW, like using DYNDNS, right?
I like the idea, VPNing home and connecting to my PC from inside my LAN, - just feels more secure.
Greetings
lj1977 said:
Thank you for your "real-time"-reply
That means, that you open a port on your router / FW, like using DYNDNS, right?
I like the idea, VPNing home and connecting to my PC from inside my LAN, - just feels more secure.
Greetings
Click to expand...
Click to collapse
Actually, that's the nice part - with Jump Desktop, you don't need to worry about any of that stuff - you just log in to your Google account (from inside the PC helper app) and then everything is automatic! No need to mess with port forwarding, DynDNS or anything like that - it's all automatic...
They have a free version - give it a shot - I think you'll like it!
Of course, you can always still connect to your VPN and use Jump Desktop to connect "directly" to your PC if you want to go that route. But, the option to be able to connect without VPN is a nice-to-have in case VPN access is down or something like that....
Sent from my Transformer TF101 using Tapatalk 2
Hi. I'm planning on getting a transformer, but I'm interested in the following feature:
Is it possible to control your pc:s mouse and keyboard with the touchpad/keyboard of the dockingstation? I know there are several apps that turn your screen into a touchpad for the pc and sends on screen keyboard text to your pc. But I want to be able to use the docking station just as if it was an external keyboard.
Perhaps even the included splashtop app can do this?
I think most remote desktop apps do this, but splashtop does it for sure.
Just remember there is no right-click in Android, even if you use a normal mouse. You have to long-click to 'fake' a right click.
Remote desktop isn't quite what I'm looking for though. I want to see and control my coputer hooked up to my big screen tv and with remote desktop you're logged of and can't see the big screen.
I tried splashtop laptop to pc, but didn't really like it. Sloppy and there was a trail of the mouse pointer making it harder to aim. Better than nothing though.
What I'm looking for is really just a kvm switch without the video. Synergy does this perfectly on a pc. It even shares your clipboard between computers, another thing I really want to see on Android.
mcznarf said:
Remote desktop isn't quite what I'm looking for though. I want to see and control my coputer hooked up to my big screen tv and with remote desktop you're logged of and can't see the big screen.
Click to expand...
Click to collapse
Wrong. Thats only when you use windows sad excuse for remote desktop. Any REAL RD does not log out the server, unless you set it up to do that.
mcznarf said:
I tried splashtop laptop to pc, but didn't really like it. Sloppy and there was a trail of the mouse pointer making it harder to aim. Better than nothing though.
Click to expand...
Click to collapse
Weird, I dont have it. Sounds like either your PC or network is very slow.
But there are better remote desktops for PC<->PC than splashtop.
mcznarf said:
What I'm looking for is really just a kvm switch without the video. Synergy does this perfectly on a pc. It even shares your clipboard between computers, another thing I really want to see on Android.
Click to expand...
Click to collapse
That severely cripples your options. Theres not a high demand for such a thing since the TF's are like the only tablets with real keyboard and mouse.
There are plenty of apps that give you remote keyboard control and can turn the tablet to a touchpad to control the PC, but I doubt that works with a real mouse.
Ok! I keep hoping I'll see some neat way to get my desktop apps on my Surface on here! However, I found a pretty cool solution myself!
First I set up remote desktop with my windows 7 PC and my surface. That was cool. It felt clunky and slow. However, I looked up how to do RemoteApps. I thought it looked complicated but worth it. While stumbling around I found a utility that basically sets it up for you!
1. First setup remote desktop access and free the port for remote desktop. I will not describe it here.
2. I used this utility! Kim Knight's remoteapp tool. Google it. XDA won't let me post a link cause I've never posted before. I just wanted to share my findings.
3. I now can use Utorrent, Photoshop and even my silly Pidgin! Eventually I'm going to use Maya! It works great with hardly any lag! The only lag I get is when I'm saving to my tablet vs the remote computer. I haven't been able to get a browser to work yet but I have invested that much time into it. I'm sure other people will figure it out. Whats cool is Utorrent will save to my tablet. Yah download speeds are slower but expected!
Nice find
This is indeed a great find! I've played with RemoteApps before on the server editions of Windows, but it's quite tricky to get it to work with one server and not a huge enterprise! Being able to use it in this way is just great. Plus we can probably work out an XML file that will populate the apps into the RemoteApp control panel / metro RDP client automatically.
However, I'm having a problem with this on Win 8 (as a host). It seems to all setup ok, but upon connecting (from Win8 or Surface RT) after credentials, cert etc are accepted the RDP client just vanishes. I see Kim Knight's page says it works with Win 8 CP - has anyone tested it with Win 8 RTM? If MS have broken this with Win8 I think I'll have to setup a Win7 box/VM just for this purpose!
I had issues getting it working on Windows 7 pro at work, so i swapped up to Enterprise and it worked great. I haven't tested it at home yet off my system. I haven't used this but for my home fileserver, but you can take it a step further and patch RDP to work for multiple concurrent connections.
http://www.redmondpie.com/remote-de...-easy-way-with-this-native-windows-rdp-patch/
RemoteApp Tool requires:
•
Microsoft .Net Framework 3.5
•
Remote Desktop 7 enabled on host
•
Remote Desktop 7 client on client
•
Windows 7 Enterprise or Ultimate (or Vista Pro or XPproSP3 - untested)
Eirikr88 said:
I had issues getting it working on Windows 7 pro at work, so i swapped up to Enterprise and it worked great. I haven't tested it at home yet off my system. I haven't used this but for my home fileserver, but you can take it a step further and patch RDP to work for multiple concurrent connections.
http://www.redmondpie.com/remote-de...-easy-way-with-this-native-windows-rdp-patch/
Click to expand...
Click to collapse
With concurrent connections, can you remote app and use desktop still with same login?
Edit: Tried it myself and it works. So now I can remote app in while I'm still logged in my desktop and it won't boot me off, allowing me to use them simultaneously with the same login.
I can confirm this works with Windows 8 Enterprise, but not Pro. There is, of course, no Ultimate. This is all a bit of a shame as I can't use RemoteApp on my primary home PC, which also runs Media Centre (which can't be added into W8 Enterprise).
yokuyuki said:
With concurrent connections, can you remote app and use desktop still with same login?
Edit: Tried it myself and it works. So now I can remote app in while I'm still logged in my desktop and it won't boot me off, allowing me to use them simultaneously with the same login.
Click to expand...
Click to collapse
Mine keeps booting me off... Asks me to sign out the other user before logging in. Any tips on how you were able to achieve that?
Mandy
mandy3d said:
Mine keeps booting me off... Asks me to sign out the other user before logging in. Any tips on how you were able to achieve that?
Mandy
Click to expand...
Click to collapse
Did you install the concurrent RDP patch?
I installed it on Windows 7 Ultimate and I can use remote apps on my Surface and use desktop at the same time.
Guilde posted for remote apps on Windows 8 ENT
I have a post up on how to get this working on Window 8.
http://mattalter.wordpress.com/2012/11/09/how-to-enable-remote-apps-in-windows-8-and-windows-rt/
Thanks
Matt
Brilliant. Worked like a charm. No idea how, without a server running the remote app role, but it does.
Sent from my HTC One X using Tapatalk 2
mattalter said:
I have a post up on how to get this working on Window 8.
Thanks
Matt
Click to expand...
Click to collapse
Does it work with a win 8 pro instead of an entreprise edition ?
No
Sent from my HTC One X using Tapatalk 2
landwomble said:
Brilliant. Worked like a charm. No idea how, without a server running the remote app role, but it does.
Click to expand...
Click to collapse
RemoteApp is just a remote desktop connection to a specific application, it's been around since Windows XP SP3. It's also how XP mode in Windows 7 does its magic.
I know what remote desktop is! But remoteapp - seamless windowed app on client - is pretty impressive.
Sent from my HTC One X using Tapatalk 2
The remote app program does work under Windows 8, but you need to run it as administrator otherwise it's crashtastic.
After that it works perfectly.
One other thing is that you should apply the patch to allow multiple co-current remote desktop sessions to work on your machine, here's the patch... http://www.tenniswood.co.uk/technol...current-remote-desktop-sessions-in-windows-8/
That's not legal.
Sent from my HTC Desire using Tapatalk 2
i would love to get this working on windows 8 pro. does anyone know of a way to get it working?
remote desktop help
Hey all, if anyone can help me get remote desktop working on my surface it would be greatly appreciated. If a developer out there could set up an app to get this done easier, could be a moneymaker, I know id pay for it.
After scouring youtube, and the web, I found a lot of different walkthroughs on how to set up a home pc as a remote server. Unfortunately, I really don't know what im doing and cant figure out why it isn't working. Im running WinXP Pro SP3 on a few year old laptop (I bought the thing during the Vista debacle, and down graded to xp for software reasons - I am an architect and needed my AutoCAD and various graphic intensive programs)
These are the steps that I have tried, all to no avail
- I go to control panel, System, Remote, turn on Remote Desktop.
- open Linksys router configuration, and try to set up Port Forwarding
- this is where it really gets confusing for me, and I don't think that I am doing it correct. I know I need to open the port, I go to Applications and Gaming, and enter RDP, Im not sure of the port number, and what else to do here
- cmd, ipconfig - I enter all information - ip address, DNS, Gateway, etc?
I then found out that in order to really get this working, I needed a static IP address - Im not sure how to do this, but I found a couple posts, and a youtube video suggesting using DynDNS to get this working as a host. I signed up, and am still not able to connect.
Any help would be appreciated - Im not great with this stuff.....I never really played with networking, before....Please help me get my Surface working. Its possible im not entering the address correctly in the Surface Remote Desktop App.
Thank You!!
If the surface is on your home wifi, it should be able to rdp (remote desktop) to the XP system no problem.
Only need the router ip mapping / translation if using the Surface outside the house on another Internet connection