Database Info

[Completed] pls help!...bootloop on gionee p3 without cwm, no backup...

i tried rebooting after receiving a call n it got stuck on manufacturer logo [GIONEE], i have not installed any cwm nor backedup anytin...pls help

Hi,
Welcome to XDA !!
I found a thread Here where someone had a similar issue on your device.
It is a short thread- if you don't find a solution by reading what is there. perhaps that would be a great place to ask.
All the best !!

[Completed] Help! Part of nvram region deleted

An issue i face after flashing a custom Rom i downloaded from this forum is a little bit tricky for me.
Everything works fine after the flashing apart 3G. Edge works just fine , but i lose network connection immediately i enable 3G service. So the phone has to always stay on 2G only.
i have tried all i know should solve it to no avail . I used Maui meta etc but it didn't work.
NB
I dont have the stock rom to reflash nvram with.
Phone: Mt6572
If there is any more relevant information i left out, please let me know. Awaiting your kindest suggestions.

Dagobert88 said:
An issue i face after flashing a custom Rom i downloaded from this forum is a little bit tricky for me.
Everything works fine after the flashing apart 3G. Edge works just fine , but i lose network connection immediately i enable 3G service. So the phone has to always stay on 2G only.
i have tried all i know should solve it to no avail . I used Maui meta etc but it didn't work.
NB
I dont have the stock rom to reflash nvram with.
Phone: Mt6572
If there is any more relevant information i left out, please let me know. Awaiting your kindest suggestions.
Click to expand...
Click to collapse
Here is what I found:
[Q] MT6572 nvram.bin required by threatalive
missing baseband mt6572 by leo_hacker82
CUBOT GT72E (MT6572) BRICKED (Help Thread) by Aedirus
Hopefully one of the mentioned advices can help in your case.
If not maybe best to ask in one of these threads, or in the Android Q&A, Help & Troubleshooting forum.
Good luck !
P.S.: Next time ... make a backup of all partitions before messing around

Thread closed. Thank you!

[Completed] MOTO G Unable to Send SMS

Hi,
Need help very badly ... Tried all the methods mentioned on web starting from factory reset to Stock Rom to setting the SMSC number
Here is what my problem is
NOT able to send sms or receive SMS on MOTO G gen 1
I was using CM12.1 initially , which was good but the Gmaps were not comfy in it ( the gps used to get lost often)
Then i moved to a Custom ROM of 5.1 ( dont remember the maker basically a stock one but some boatware removed)... this is when the problem started
since then I have tried all the stuff mentioned on the forum but no help
Any way i can get it serviced , probably by locking the bootlocker and going to a service center and getting it fixed OR
IS THERE ANY OTHER SOLUTION
PLEASE HELP

smarannss said:
Hi,
Need help very badly ... Tried all the methods mentioned on web starting from factory reset to Stock Rom to setting the SMSC number
Here is what my problem is
NOT able to send sms or receive SMS on MOTO G gen 1
I was using CM12.1 initially , which was good but the Gmaps were not comfy in it ( the gps used to get lost often)
Then i moved to a Custom ROM of 5.1 ( dont remember the maker basically a stock one but some boatware removed)... this is when the problem started
since then I have tried all the stuff mentioned on the forum but no help
Any way i can get it serviced , probably by locking the bootlocker and going to a service center and getting it fixed OR
IS THERE ANY OTHER SOLUTION
PLEASE HELP
Click to expand...
Click to collapse
Hi,
There is a forum dedicated specifically for your device. You shall try to ask your question there http://forum.xda-developers.com/moto-g/help to get better help and support.
Good luck

Thread closed, thank you

[Completed] Alcatel POP c7 7041x Brick [not a hard brick a hugeeeeeee brick :( ]

I need help ok the story
i got a alcatel pop c7 7041x and i wanted to install cm i found one but after instal just flashes cm logo and phone turns off and on and the backup stoped working okk i i read that its bricked and downladed sp flash and firmware and sh** hapens formatedd all incuding the preloader i tried to flash but dram error sos help mee i got this phone 10 days ago
PS:Sorry for my bad english i am serbian

LinoLada said:
I need help ok the story
i got a alcatel pop c7 7041x and i wanted to install cm i found one but after instal just flashes cm logo and phone turns off and on and the backup stoped working okk i i read that its bricked and downladed sp flash and firmware and sh** hapens formatedd all incuding the preloader i tried to flash but dram error sos help mee i got this phone 10 days ago
PS:Sorry for my bad english i am serbian
Click to expand...
Click to collapse
Hi,
Thanks for using XDA Assist.
I found a discussion thread specific to your device > General discussion > Upgrading, Modifying and Unlocking > Alcatel OT POP C7 (7041x)
Try posting in there and the experts may be able to help you.
Good luck

[Completed] GSM service :Radio off

My device is lenovo a6000+ (not any physical damage, its a software problem done by me)
and my mistake is am unfortunately installed youphoria volte update, (i need to undo this how)
then after my phone is not getting network signal... (the band width may changed, so how to correct it)
I re installed OS too.... (phone overally good functioning except signal problem that causes calling ended)
Plz find me solution plz urgently.....
plz tell or forword this info to any another one who can help me please............

venkat09227 said:
My device is lenovo a6000+ (not any physical damage, its a software problem done by me)
and my mistake is am unfortunately installed youphoria volte update, (i need to undo this how)
then after my phone is not getting network signal... (the band width may changed, so how to correct it)
I re installed OS too.... (phone overally good functioning except signal problem that causes calling ended)
Plz find me solution plz urgently.....
plz tell or forword this info to any another one who can help me please............
Click to expand...
Click to collapse
Greetings and welcome to asssit. I found this thread that may help
http://forum.xda-developers.com/lenovo-a6000/help/weak-signal-message-sending-eror-help-t3473121
why not ask in the forum here
http://forum.xda-developers.com/lenovo-a6000/help
and the experts there will be able to help you
Good Luck
Sawdoctor