Database Info

Bypass setup — is it possible?

I returned my phone to stock UE40. So it's in something like a factory state. I booted up and, as expected, got the language selection screen. After that, I logged into my WiFi network. But I don't want to enter my account info. I just want to get to the home screen. Seems to me I did this very recently, but that may have been on a Nexus device, maybe one with a custom ROM. I don't recall for sure. Anyway, I can't get past that system request for my Google email address. Is there a way to do this where I can just get to the home screen without entering credentials?

maigre said:
I returned my phone to stock UE40. So it's in something like a factory state. I booted up and, as expected, got the language selection screen. After that, I logged into my WiFi network. But I don't want to enter my account info. I just want to get to the home screen. Seems to me I did this very recently, but that may have been on a Nexus device, maybe one with a custom ROM. I don't recall for sure. Anyway, I can't get past that system request for my Google email address. Is there a way to do this where I can just get to the home screen without entering credentials?
Click to expand...
Click to collapse
One method is to NOT enter your wifi...or to tell it to forget it...maybe pull the sim to so no data connection...then it has no option to setup a gmail account and should let you skip it.
Once at home screen you can go into settings,wifi and re-enable your wifi.

famewolf said:
One method is to NOT enter your wifi...or to tell it to forget it...maybe pull the sim to so no data connection...then it has no option to setup a gmail account and should let you skip it.
Once at home screen you can go into settings,wifi and re-enable your wifi.
Click to expand...
Click to collapse
I don't think I was able to get past the wifi request. That's what I tried the first time around. I could reset and try it again. The SIM card is already out.

I reset and tried to bypass the wifi selection. No go. Even if I turned wifi off, the system would just turn it back on and cycle me through language selection and wifi network. Strange. I KNOW I did this recently, but that may have been on a Nexus 6. Probably was.
FWIW, every time I reset the device, it bootloops when I try to boot into the system. Tonight, this happened a few times. First, when I wiped the device, flashed a system image, and tried to boot into it. Then, a few more times when I reset from stock recovery. Each time, I'd power the phone off during the bootloop and then restart. And it would be OK.
No matter. I'm where I need to be. Just wondered if there was a way around wifi selection and and entering an email address.

Sorry to bump this thread,
But I'm having a similar issue. I restored the phone and booted fine. Until I got to the setup page, I couldn't skip it so I login in my credentials and the "protect your phone" prompt appeared and sent me back to the language screen.
I’m restoring it again using the restore software 4.9.2 tool, since I had the 5 percent issue earlier and I’m going to try again and see if I can skip it.
Of course I’m unable to set up usb debugging as I can’t at least accessing the main home screen.
Any advice suggestions are much appreciated.
Thanks.

Never mind got it working and back on Twrp and flashing. Used an old samsung trick and accessed the developer settings that way.

How you did it?

I can tell you what I did to bypass it.
I first got a USB OTG flash drive from the local computer store. I then downloaded an unsigned apk file from any site that has them. Personally I stumbled upon this solution so I had some random "Unlock your phone" APK on the drive. Anyhow, when the phone was on I plugged the flash drive into the phone and tried to open the APK file, it gave me an error message stating that the app was unsigned but then it allowed me to go into security settings, from there I could turn off all of the google verification crap. After I turned off all of the settings, I wiped the cache on the phone, restored it, and it was fixed. No more verification screen.

i HAVE NO ISSUE ON 6045y WITH STOCK FIRMWARE OR WITH DCZ FIRMWARE. I can bypass the setup screen normally.

[Completed] please help with resetting ZTE Axon

Hello.
I have the ZTE axon A1R (not pro) and about a month ago I received a notification for a update to marshmallow 6.0 and so I went through the process, and it completely froze and would not boot.
Since then I did a factory reset however I cannot get passed the sign in screen where it asks you to sign in with the gmail that was previously associated with the phone. I have done this countless times and it simply does not accept the email even though it is correct. I have initially waited 3 days and since then tried many many times but it simply throws me back to the sign in screen.
I have tried the other option where google sends a code digit and this doesnt work wither.
I have been in contact with zte customer service but it is a complete joke. They have done absolutely nothing to help me and what I thought would take a couple of days at the most to fix, has now been over a month and is very frustrating. They keep sending me email to "wait and that they forwarded my concerns to the appropriate people to help" however this has not happened in over a month now.
what can I do? (I tried searching for this problem here on xda forums and google in general but cannot find the relevant information. Mostly what I find is stuff for the pro version of this phone)
Thank you

Hi !
Is this thread useful ?
Cheers !

xanthrax said:
Hi !
Is this thread useful ?
Cheers !
Click to expand...
Click to collapse
hi,
thanx for trying to help but sadly the above is for the Axon 7.
i am only able to find information (on xda) regarding Axon 7 and axon pro neither of which is my phone.
mine is the regular axon (A1R) http://www.gsmarena.com/zte_axon-7686.php
I should note that I am not so much interested in rooting it or anything like that.
I just want to be able to use it again under any circumstance but I simply cannot get passed the "sign in with email previously associated with this phone" because it keeps sending me back after I put in the correct information.
ZTE has been a complete failure in helping me even though it was their update that has cause me problems in the first place

Try to change the email password from another device, a pc maybe
Sent from my SHIELD Tablet using Tapatalk

xanthrax said:
Try to change the email password from another device, a pc maybe
Sent from my SHIELD Tablet using Tapatalk
Click to expand...
Click to collapse
I have done that.
no go.
and the weird thing is that, when i do type in the wrong password, it knows, and says so... but when I type in the correct one, it doesnt say anything, just jumps right back into the 'please sign in with the email associated with this password' screen.
I think it may be a issue with the update itself.
I cannot get passed the 'verify your account'
page. I tried everything, I keep putting in the
correct email and password, and even trying with the
code that google sends via text, and it always just
sends me back to the 'verify your account'.
THis is a problem with ZTE update. It fails to
recognize the previous email that was associated to
the phone.
When I power the phone while holding the 'up' button
and go into android recovery, it says:
ZTE/P897A10_ROGERS/billy
6.0.1/MMB29M/20160707.005703
So it seems that even though I have reset the phone
into factory reset, it has still applied the 6.01
update which is not what the phone came with when I
bought it (it came with 5.01)
Perhaps this is the problem and why it is not
recognizing the email associated with the phone.
I dont know why it says "ROGERS/billy"
Rogers is not the carrier that I am with and billy is
not my name.

Assistance with (partial)Bootloop and Locked Bootloader.

Hey there forums.
I've been an active browser of XDA but never really created an account but I've done so to have assistance with a particular situation with my device.
So the other week, i had spent 150 dollars on a Sony Xperia XA F3115 from Vodafone, Australia and it turns out that the bootloader was locked because of Vodafone and i wasn't going to pay 50 dollars to unlock it. I alternated and browsed the internet (Mostly XDA but other sources aswell) to figure out if there were any methods of bypassing this, whether it be easy or not - I was willing to try anything that seemed like it had a chance to work, without a 100% failure rate. Reading responses to particular methods, i was drawn into one method of just reflashing the stock firmware onto the device and then rooting, flashing and doing everything from there (as the device was no longer locked by Vodafone at that point).
I have completed this task as of this morning, and the device booted successfully. As soon as i unlocked my device, i had received the general android setup window but half way through, i got spammed with "Name has stopped responding" countless times to the point where the phone was literally unusable, it would just pop up again right after closing it - So i decided to restart the device. This was probably a big mistake, it booted fine but it said "Android is updating" and had the whole "Applications updating 100 out of 255" stuff happening. Then it booted to the lock screen, which i had previously setup before i flashed the device which didn't really surprise me too much.
Then it rebooted. Now every single time i boot the device, it reboots to the "Optimizing apps blah out of blah" and then will reboot upon the notification bar popping up, but no lock screen. I decided that my best cause of action was to download another firmware and try that one instead, but I'm unable to boot my device into bootloader mode as it's impossible to happen. I turn off my device, plug it in and hold the volume down button but it refuses to work anymore.
Now that the situation has been explained, I'd really like your help to see if i can have this resolved. I'm baffled as to why Vodafone even locked it to begin with, since the phone was prepaid and had nothing to do with any sort of plans - nor was it even available as a plan. I don't have the money to buy a new phone, and they have already denied me a refund. I need this phone for work and the mistakes i made were stupid - Please, i need assistance. You're all hopefully more tech savvy than i am in the field of mobile phones.

Panasonic FZ-X1 ToughPad unlock/wipe?? help?

Hey guys, so I work for an IT company that buys and sells ex gov, ex school etc stuff in bulk and resells to whoever, at the moment we have 9 of these things and they are all locked with a number password, we have tried to contact the people we got them from but as so often happens, they haven't been helpful in providing the pin, usually we would give up and throw em out but these things aren't cheap, so as the head tech, one of my superiors offered me one of them to keep/sell myself if I can figure out how to unlock them.
So backstory aside, the easy solution is boot into recovery and wipe, but these things (which ive personally never seen before) have a password in the recovery menu, requiring you to enter a password before it will actually wipe.
What is my best option to unlock/wipe these things? annoyingly the "master reset" codes etc that Panasonic have are not usable cus the dialer cant be accessed from the lock screen, my thought was adb but its been a while since ive messed with that and could do with some guidance on it.
I promise you these are not stolen, we just really dont want to lose a large chunk of change on these.
Thanks guys!
edit: so updates, usb debugging isnt on so ADB cant be done, nothing detects, recovery simply has wipe or reboot, wipe involving a password to be entered before itll wipe, its running android 5 so with some messing around im able to bypass the lockscreen and let the dialer show up and be used, by calling an emergency number and quickly hanging up while frantically clicking back and or home button, I can get it to (while in a semi locked state still) launch the home menu thats set up, annoyingly this is some organisations software and exiting it to the actual home screen requires a password again..this time a text password so forget basic guessing, and thats basically where im at, from here launching any of the tools or chrome etc will take you back to the lock screen, if I can somehow get chrome to launch, I could enter settings from there and wipe, but so far cant seem to without it going back to the lock screen and starting all over again.
Any help or advice would be greatly appreciated, Thanks!

Hi,
I have the same problem! But this thing is brand new!!
I purchased a Panasonic toughpad Fz-x1 a couple of days ago and the first thing I did was to do an update on it which went well and the version of android on it is 4.2.2. I checked the Panasonic website to see if there was an update to 5.1.1 and there was. So I downloaded the file to my sd card and done the update, but now I am stuck with the dreaded dead android red exclamation. There is a menu of two lines, 1: Reboot system now and 2: Wipe data/ factory reset.
When you do a wipe data/ factory reset the next screen is to delete all user data and say yes to that. But now it wants a password that is numeric and I have no idea what that is as I haven't set up any security on it yet. I am hoping someone here can help me with this problem. Thanks

I am getting in touch with Panasonic and when I receive a reply from them I will pass it on here.

i need the same, my japan fz-x1 have a password in this function

HELP needed. Galaxy 8+ MobileIron lock out.

Sorry if this is in the wrong location but it's been a long time since I've been here and everything looks different with the forum, lol. I couldn't find anything after searching the forum so making this post.
Here's my issue. I have a very old Galaxy S8+ issued by my employer. I left the company back in Jan 2020. Since then my son has been using the phone at the house to play games on and watch YouTube, etc. Whenever it would get running too slow I would just do a factory reset to clean everything out and my son was good to go again. UNTIL YESTERDAY. I did a factory reset like usual but when it restarted and I began the initial set up like you do with a new phone I got a message after connecting to my WiFi that "This device is managed by your organization". It then had a pop up for username/password for MobileIron. Never got that before so only thing I can think is that my old company started using this MDM software sometime between the last time I did a reset and yesterday. I don't have any sign in creds as I don't work for them anymore. Rebooted into "safe mode" to uninstall the app but cannot because the option is grayed out.
Is there any way to root this phone and get rid of the MDM software or install a ROM or something so that the phone is usable again? Obviously, I can't boot the phone up either than in "safe mode" Or is the thing a paperweight now. Just wanted to check before I chuck it in the trash. Any help is greatly appreciated. Thanks in advance.

I just saw my signature. LMAO! I think it's a little outdated.