Related
Reason Im asking is today I left my G2 home in a pair of pants where I guess the inside of the pocket got dyed red by something. I took out my G2 and now it has a red hue to the grey housing. Got me thinking and then I found the video below. I know its not possible to paint the housing due to the "soft" material. So any ideas if this is possible?
I know there is a black housing of dz..I think is Australia version..can't find the link..but the price of the housing is fairly high.. original colour is easily available..but price vary..
Sent from my HTC Vision using xda app-developers app
boost3d23 said:
I know its not possible to paint the housing due to the "soft" material. So any ideas if this is possible?
Click to expand...
Click to collapse
Have you considered a rubberized paint? it might stick to the "soft touch" coating on our phones
Some of them are available in an aerosol can, spray out in very fine mists you can make a thin layer with.
you can get them in a variety of colours , but the spray on ones come in less varied shades ( the liquids you can mix pigments in)
They work well on tools in industrial environments, and grips and stuff. so i i think they would also give you more grip on the thing too ...
http://www.plastidip.com/
i think you can get the aerosol cans for like 3 bucks at a auto supply chain.
Just DONT get Undercoating or Ziebart Rubberized spray : they tend to contain tar and always remain semi gooey to repel water
I just got the Poetic Slimline in the mail yesterday and thought I'd post my first impressions
I ordered off of Amazon for ~$10 USD shipped.
http://www.amazon.com/Poetic-Slimli...Y0DO/ref=sr_1_1?ie=UTF8&qid=1368894249&sr=8-1
First off I think this is a VERY attractive case:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Some features:
Magnetic Wake Sleep
Microfiber lined cover and back
Cut-outs for all buttons, ports, and S-Pen
Cover doubles as a stand
So the case isn't exactly packed with features like a hand strap or an extra pocket for memory cards or a larger pen, no cutout for the speaker on the front for international models but it is very thin, and that's exactly what I wanted.
The outside is a fake leather but it doesn't feel very cheap, we'll see how long it holds up though. One thing that is nice though is the tolerances are very good, and the cover fits very nicely with the snap on case. Another nice thing is that the magnet also holds the cover on the backside so it doesn't flop around with the case open.
I'll try and update later if I encounter any issues but so far I think it is a very attractive and slim case, especially for the price
Thanks for your review. I have the same case for my Int'l 3G+WiFi Note 8.0 and agree. It's a very nice case.
The three negatives for me are:
1. No opening or hole in the cover for the phone earpiece speaker.
2. The main microphone hole that is next to the S-pen silo on the 3G model is just barely covered by the plastic of the case. I took a small jeweler's file and filed it down so it no longer covers the microphone. It's only covered by about 1mm.
3. I'm going to remove the SLEEP/WAKE MAGNET in the cover to prevent a Digitizer Dead Zone on the screen! See the posts in this thread:
http://forum.xda-developers.com/showthread.php?t=2249587&page=3
I'll use an app that uses the proximity and/or light sensor to do Wake/Sleep functions.
Otherwise, I really like this case.
bbfoto said:
I'll use an app that uses the proximity and/or light sensor to do Wake/Sleep functions.
Click to expand...
Click to collapse
I'll be curious to hear what app you end up using for that. There are a few mentioned in the following post, but it sounds like one of them doesn't actually lock the tablet:
http://forum.xda-developers.com/showpost.php?p=41351304&postcount=26
bbfoto said:
Thanks for your review. I have the same case for my Int'l 3G+WiFi Note 8.0 and agree. It's a very nice case.
The three negatives for me are:
1. No opening or hole in the cover for the phone earpiece speaker.
2. The main microphone hole that is next to the S-pen silo on the 3G model is just barely covered by the plastic of the case. I took a small jeweler's file and filed it down so it no longer covers the microphone. It's only covered by about 1mm.
3. I'm going to remove the SLEEP/WAKE MAGNET in the cover to prevent a Digitizer Dead Zone on the screen! See the posts in this thread:
http://forum.xda-developers.com/showthread.php?t=2249587&page=3
I'll use an app that uses the proximity and/or light sensor to do Wake/Sleep functions.
Otherwise, I really like this case.
Click to expand...
Click to collapse
This device doesn't have a proximity sensor, so you will need to find an app for the light sensor. I haven't found them to work very well, but be sure to share your experience if you find a good one.
Sent from my Samsung Galaxy Note 8 with Tapatalk HD
Mr_Armageddon said:
This device doesn't have a proximity sensor, so you will need to find an app for the light sensor. I haven't found them to work very well, but be sure to share your experience if you find a good one.
Sent from my Samsung Galaxy Note 8 with Tapatalk HD
Click to expand...
Click to collapse
Since I have the Int'l 3G/Phone Note 8.0, it does have a proximity sensor.
nice price. might pick this up
bbfoto said:
Thanks for your review. I have the same case for my Int'l 3G+WiFi Note 8.0 and agree. It's a very nice case.
The three negatives for me are:
1. No opening or hole in the cover for the phone earpiece speaker.
2. The main microphone hole that is next to the S-pen silo on the 3G model is just barely covered by the plastic of the case. I took a small jeweler's file and filed it down so it no longer covers the microphone. It's only covered by about 1mm.
3. I'm going to remove the SLEEP/WAKE MAGNET in the cover to prevent a Digitizer Dead Zone on the screen! See the posts in this thread:
http://forum.xda-developers.com/showthread.php?t=2249587&page=3
I'll use an app that uses the proximity and/or light sensor to do Wake/Sleep functions.
Otherwise, I really like this case.
Click to expand...
Click to collapse
Interesting, the thread you linked only mentioned issues with the note ii but didn't go into detail. Is this permanent damage that occurs over time? Like will there be a problem even after I take off the case? Right now with the case on, I can use the S-Pen at every point on the screen, I checked using sketchbook there might be a 1 mm sliver on the side of the screen where the magnet is, but if that's all there is its not a deal breaker for me. However, if this becomes a permanent and/or larger "dead zone" I might consider another case.
EDIT:
My lovely artwork showing the dead zone
kthung said:
My lovely artwork showing the dead zone
Click to expand...
Click to collapse
I can't speak with any certainty to the permanence question, but it seems like from your very helpful illustration that what you're seeing is the effect of the magnetic field along the middle of the right side, which does illustrate that having too strong of a magnet near the screen while trying to use it is problematic (which makes sense given that Wacom technology involves electromagnetic fields).
Per this post the location of the sensor for the wake/sleep magnet is towards the left. In theory, it should be fine to use a magnet there (assuming it isn't too strong) given that Samsung has build the device with a sensor for that purpose. But I'm just speculating.
I know im drawing away from the topic but assuming that the magnet does cause damage, would it still have the same effect if it were not on the screen? After much searching, I located that the magnet on my Moko shell is actually on the left bevel and doesn't even touch the screen itself..I'm hoping it doesn't effect my s-pen
Sent from my GT-N5110 using xda app-developers app
JokeZony0u said:
I know im drawing away from the topic...
Click to expand...
Click to collapse
That is a good point (regarding straying from the original topic): It seems like there is a lot of good and important discussion happening (and perhaps forthcoming) regarding magnet concerns (between the current thread and some other places linked above). Does it seem worth starting a separate thread (and linking there from here)? Just a thought (not a criticism or anything).
kthung said:
Another nice thing is that the magnet also holds the cover on the backside so it doesn't flop around with the case
Click to expand...
Click to collapse
Does it hold well with the case open? Is there a lot of overlap/awkwardness holding it in your hand when it's open?
I just got the Note 8 hoping to use it both at home and at the office. Previously on my Tab I'd used a non-book TPU case at home (where I typically use my tablet most) and then swapped it out for a book-style case for work/travel. I'm hoping to find a case that might allow the best of both worlds and this one seems the thinnest/closest to that.
forum.xda-developers.com is a one of the more impressive phorums I've seen. Thanks so much for keeping the internet classy for a change. Youve got style, class, bravado. I mean it. Please keep it up because without the internet is definitely lacking in intelligence.
Grogck said:
Does it hold well with the case open? Is there a lot of overlap/awkwardness holding it in your hand when it's open?
I just got the Note 8 hoping to use it both at home and at the office. Previously on my Tab I'd used a non-book TPU case at home (where I typically use my tablet most) and then swapped it out for a book-style case for work/travel. I'm hoping to find a case that might allow the best of both worlds and this one seems the thinnest/closest to that.
Click to expand...
Click to collapse
No there isn't much overlap with the cover open. It can wiggle up and down a little, but thats only if I move it intentionally. Generally it stays put
Женские решен
ну ты молодец, девочка, нашла куда написать)))
I'd forgotten about Poetic (have a couple of their cases for my Nexus 4 and iphone 5) and this looks about as nice if not nicer than the stock Samsung case/cover... and at $40 less! I initially bought a no-name "slimline" type case from Amazon (5 or 6 bucks) when I first got my GN8, but it was so crappy my N8 would actually fall out of it.... at the time there wasn't anything else but the generic folio type cases, which I hate. So I caved and got the $50 Sammy case, but now, I'm returning it to Bbuy and getting this Poetic if it comes in black!
Thanks for this review!
bbfoto said:
Thanks for your review. I have the same case for my Int'l 3G+WiFi Note 8.0 and agree. It's a very nice case.
The three negatives for me are:
1. No opening or hole in the cover for the phone earpiece speaker.
2. The main microphone hole that is next to the S-pen silo on the 3G model is just barely covered by the plastic of the case. I took a small jeweler's file and filed it down so it no longer covers the microphone. It's only covered by about 1mm.
3. I'm going to remove the SLEEP/WAKE MAGNET in the cover to prevent a Digitizer Dead Zone on the screen! See the posts in this thread:
http://forum.xda-developers.com/showthread.php?t=2249587&page=3
I'll use an app that uses the proximity and/or light sensor to do Wake/Sleep functions.
Otherwise, I really like this case.
Click to expand...
Click to collapse
Did you take magnets off? Was it was and neat?
Your post was extremely helpful! Thanks
k000 said:
Did you take magnets off? Was it was and neat?
Your post was extremely helpful! Thanks
Click to expand...
Click to collapse
Regarding the Poetic Slimline Case, Yes, I removed the magnet in the flip cover by using a sharp Xacto knife and cut a ~7mm "+" over the center of the magnet. I used a paper clip to find the exact position of the 5mm round magnet. I made my cut on the inside of the cover flap (microfiber side).
This part of the cover has a thin metal panel the full vertical length of the flap, so you don't have to worry about cutting through the front of the cover if you are careful. You can pry the little magnet off of the metal panel with the point of the Xacto knife. It is secured by a small amount of soft glue, like rubber contact cement.
After the magnet was removed, I lifted the microfiber cloth gently with the curved end of a paper clip and put a small dab of crazy glue on the metal panel in the center of the opening. Then just pressed the microfiber cloth down with my finger for a few seconds until it bonded and dried. I can barely tell that it was ever cut. Just don't use too much glue or it may absorb into the microfiber and create a hard spot that would scratch the screen. For that reason, it may be better to use rubber contact cement or another soft glue.
I did not remove the thin magnetic strip in the edge of the molded case that is next to the IR Blaster. It is far enough away from the screen to not affect it, and this magnet helps to keep the cover flap closed, though it is VERY weak and doesn't hold it very securely.
The folding cover flap also does not stay folded very well when you use it to prop up the tablet in either position. It will easily flop open unless you are very careful. The rubber feet on the edge of the Official Samsung Book Cover Case work well in this regard to keep the base of the tablet from sliding back as you press the touchscreen, at least on hard/smooth surfaces like a desk or table. However, they don't help much on any surface that rubber will not "stick" to.
I would actually rather have a kickstand case like the Case-Mate iPOP! for the i9100 Galaxy S II. It worked at just one angle, but worked in both horizontal (landscape) and vertical (portrait) positions.
And I don't really miss not having the automatic wake on/off function. It would be nice, but until there is more concrete evidence regarding the magnet affecting the digitizer, I'm going to play it safe. I purchased the 3G/phone version so it was quite a bit more of an investment compared to the WiFi only model. For now, I'm just pressing the power button on the side. It takes a very light press to activate. I haven't even bothered to install an app that uses the proximity sensor for this, like Screen Standby # Root.
Hope this helps.
bbfoto said:
Regarding the Poetic Slimline Case, Yes, I removed the magnet in the flip cover by using a sharp Xacto knife and cut a ~7mm "+" over the center of the magnet. I used a paper clip to find the exact position of the 5mm round magnet. I made my cut on the inside of the cover flap (microfiber side).
This part of the cover has a thin metal panel the full vertical length of the flap, so you don't have to worry about cutting through the front of the cover if you are careful. You can pry the little magnet off of the metal panel with the point of the Xacto knife. It is secured by a small amount of soft glue, like rubber contact cement.
After the magnet was removed, I lifted the microfiber cloth gently with the curved end of a paper clip and put a small dab of crazy glue on the metal panel in the center of the opening. Then just pressed the microfiber cloth down with my finger for a few seconds until it bonded and dried. I can barely tell that it was ever cut. Just don't use too much glue or it may absorb into the microfiber and create a hard spot that would scratch the screen. For that reason, it may be better to use rubber contact cement or another soft glue.
I did not remove the thin magnetic strip in the edge of the molded case that is next to the IR Blaster. It is far enough away from the screen to not affect it, and this magnet helps to keep the cover flap closed, though it is VERY weak and doesn't hold it very securely.
The folding cover flap also does not stay folded very well when you use it to prop up the tablet in either position. It will easily flop open unless you are very careful. The rubber feet on the edge of the Official Samsung Book Cover Case work well in this regard to keep the base of the tablet from sliding back as you press the touchscreen, at least on hard/smooth surfaces like a desk or table. However, they don't help much on any surface that rubber will not "stick" to.
I would actually rather have a kickstand case like the Case-Mate iPOP! for the i9100 Galaxy S II. It worked at just one angle, but worked in both horizontal (landscape) and vertical (portrait) positions.
And I don't really miss not having the automatic wake on/off function. It would be nice, but until there is more concrete evidence regarding the magnet affecting the digitizer, I'm going to play it safe. I purchased the 3G/phone version so it was quite a bit more of an investment compared to the WiFi only model. For now, I'm just pressing the power button on the side. It takes a very light press to activate. I haven't even bothered to install an app that uses the proximity sensor for this, like Screen Standby # Root.
Hope this helps.
Click to expand...
Click to collapse
Thanks again for a very helpful post. It sounds a bit daunting but I do need a very slim protection and just something to cover the screen when not being used... Wish all these manufacturers changed the magnets to just something else.
Thanks again
Sent from my GT-N5110 using XDA Premium HD app
k000 said:
Thanks again for a very helpful post. It sounds a bit daunting but I do need a very slim protection and just something to cover the screen when not being used... Wish all these manufacturers changed the magnets to just something else.
Thanks again
Sent from my GT-N5110 using XDA Premium HD app
Click to expand...
Click to collapse
No problem. So far the Official Samsung Book Cover Case is the slimmest and lightest of the cases that I've tried, besides a simple TPU case with no screen cover. Also, since it is the Official OEM Samsung case, they *should* provide warranty service for the Note 8.0 if the magnet does cause any problems with the screen.
k000 said:
Thanks again for a very helpful post. It sounds a bit daunting but I do need a very slim protection and just something to cover the screen when not being used... Wish all these manufacturers changed the magnets to just something else.
Click to expand...
Click to collapse
I recommend you consider the STM Cape. It's really not bad at all in terms of extra bulk and it provides some nice protection (and there's no magnets!).
Something under the lens, near the top: http://imgur.com/a/SMXPU
I'm not sure what this is but looks like a speck of dust? But I'm not sure. What do you think? Is there a way to remove it without taking off the back cover completely (e.g. tapping the phone downwards, tapping the covert itself, etc.)
Not sure how it affects (or if it even does) image quality.. haven't noticed anything too unusual
Yep, looks like dust to me and I have mixed thoughts. One hand I say don't worry if it doesn't impact images, but also think if dust got in how dust/water proofed is the device?
cliffr39 said:
Yep, looks like dust to me and I have mixed thoughts. One hand I say don't worry if it doesn't impact images, but also think if dust got in how dust/water proofed is the device?
Click to expand...
Click to collapse
I'm thinking more like dust went inside during the assembled of the device
Sent from my E6653 using Tapatalk
I have the same thing and quite a bit... Doesn't affect most outdoor images, but if you I a desk light at a certain angle, the dust spots are more apparent (they look like floaters in your eye). I had the lens cover replaced when I had the left blur problem. JerryRigEverything said the lens cover is plastic and scratches and loosens up very easily if you use a knife to poke it...
It looks like water vapors to me. Did you sink it in water? That's how my HTC camera looked after taking water. Could be that your device is not hermetic anymore. There is a test for that, using your service menu / pressure sensor and gently pushing on the screen. Google it up.
If it's not water but dust, you'd better test it though, as you don't want to put it in water if it's not water/dust proof anymore.
Xperia Z5 E6653
I'll start off by saying that I was given this case solely for the purpose of writing an unbiased review. Here it goes!
UPDATE UPDATE UPDATE: Poetic has now revised the case where the formerly intrusive "P" logo is now moved above the fingerprint sensor. The "Affinity" branding that used to be on the right edge of the case is now completely removed. All other dimensions, accents, materials, cutouts, etc. have not been changed. The updated version can be purchased from Amazon (where I acquired mine) from the link below. Two additional pictures have also been added; one that compares the cases side-by-side and one with the phone in the revised case
<MODERATOR EDITED - SPAM REFERRAL LINKS DELETED>
My phone: Nexus 6P 64 GB Aluminum. Slickwraps skin applied; white carbon fiber back with white carbon fiber frame with matte black visor. Intelliarmor TGSP version 2.
Overall quality: There are two types of materials here; Black TPU and the clear stuff. I don't know what the clear material is, but I'd describe it as a malleable plastic. There are no rough edges
Overall Appearance: This one's subjective, but I like most of the design. I never wanted a case that was opaque. I always liked customizing my phone with skins and whatnot, so a transparent case is to my preference. However, I ultimately prefer having no back cover. Yup, I like true backless bumpers. Down the road, I might introduce a hobby knife to the back cover and remove the center clear plastic section for two reasons:
1. I like the phone to feel thin in the center
2. I don't like the possibility of trapping dirt/dust/sand/lint between the case and the phone (although the vinyl would protect my phone anyways)
Fit: The fit is pretty snug. When trying to get the phone into the case, it was slightly tight. I would probably credit that to the fact that I have frame vinyls applied. That being said, I don't think it's tight enough to warp the phone in anyway. "Snug" is the perfect descriptor here. Referring to the picture that shows the screen of the phone right at the edge, you can see that the entire screen glass is exposed. That means a full edge-to-edge glass screen protector should work here. I emphasize the word "should" because I don't have an edge-to-edge TGSP. I also think the frame vinyls might push the case outwards a slight bit, but it doesn't seem like that makes any considerable difference if you want to use a full coverage TGSP.
Buttons: Before I used the case, I only had the frame vinyls applied. The frame vinyls made it a bit more difficult to find and click the buttons. The case actually adds the "clicky" feeling back to the buttons. This is because the inner surface of the case that comes in contact with the buttons has protrusions that make direct contact with their perspective buttons. The vinyl no longer dampens the feedback of the buttons while using the case. The buttons are not considerably any more or less sensitive than a naked phone.
Cutouts: Please refer to pictures for cutout measurements.
Regarding the USB-C port, the cutout is sufficient. If you look closely at the picture where the phone is plugged in and laying with the screen up, you may notice that that case is slightly bulged outwards when plugged in. The stock USB-C cable makes slight contact with the case and causes the said bulging. This did not cause any difficulties when trying to plug the phone in. In fact, most probably would never even notice this at all. I'm just weird like that.
Referring to the headphone port, the cutout is enough for my headphones (which has a pretty civilian sized plug). However, I know some people like to use studio quality headphones that have huge plug heads. Those who use headphones with larger plugs may need to enlarge the cutout, but I'd venture to say that the included cutout dimension would suffice for the majority.
Referring to the camera cutout, only the area around the vital hardware are exposed. The rest of the visor is covered. Seeing that some people are afraid of shattering this glass, this may be a relief. Looking closely at the rectangle of black TPU around the camera, you'll notice the top and bottom bars are resting on the aluminum body as opposed to the glass visor (mostly). I would think this helps in the event of a dropped phone, as the impact would hopefully spread onto the aluminum body instead of the glass. I'm just guessing that would be how it works out. I'm not testing that for you guys!
Referring to the Nexus Imprint cutout, it's well bevelled. It's not rough on the fingers, but Imprint was more comfortable to use without any case (well duh). It's not difficult to put my finger onto the sensor, but it just felt like an extra edge to feel while trying to unlock the phone.
Feel in the hand: The case is actually pretty minimal. It doesn't add significant bulk to the phone, and allows the phone to still feel pretty thin. The side edges have have some ridges that add to the grippiness of the case. Aside from the vinyls, I've been running the phone without a case. The extra grip is actually much appreciated. The edges also raise the screen slightly off a flat surface when placed screen down. Huge plus because I like to leave the phone out at the dining table, but face down because I don't want the phone to interrupt my meal. The four corners of the case are also bulged ever so slightly. I assume this is good for shock dampening in the event of a corner impact drop.
rice923 said:
I'll start off by saying that I was given this case solely for the purpose of writing an unbiased review. Here it goes!
My phone: Nexus 6P 64 GB Aluminum. Slickwraps skin applied; white carbon fiber back with white carbon fiber frame with matte black visor. Intelliarmor TGSP version 2.
Price: It's $10 on amazon. Not expensive, not cheap. Pretty normal pricing.
Overall quality: There are two types of materials here; Black TPU and the clear stuff. I don't know what the clear material is, but I'd describe it as a malleable plastic. There are no rough edges
Overall Appearance: This one's subjective, but I like most of the design. I never wanted a case that was opaque. I always liked customizing my phone with skins and whatnot, so a transparent case is to my preference. However, I ultimately prefer having no back cover. Yup, I like true backless bumpers. Down the road, I might introduce a hobby knife to the back cover and remove the center clear plastic section for three reasons:
1. I like the phone to feel thin in the center
2. I don't like the possibility of trapping dirt/dust/sand/lint between the case and the phone (although the vinyl would protect my phone anyways)
3. I'm not a fan of the logo smack in the center of the back, especially when the original Nexus logo is obstructed. Considering there are three total logos/labels on the case, this one should've been omitted.
Fit: The fit is pretty snug. When trying to get the phone into the case, it was slightly tight. I would probably credit that to the fact that I have frame vinyls applied. That being said, I don't think it's tight enough to warp the phone in anyway. "Snug" is the perfect descriptor here. Referring to the picture that shows the screen of the phone right at the edge, you can see that the entire screen glass is exposed. That means a full edge-to-edge glass screen protector should work here. I emphasize the word "should" because I don't have an edge-to-edge TGSP. I also think the frame vinyls might push the case outwards a slight bit, but it doesn't seem like that makes any considerable difference if you want to use a full coverage TGSP.
Buttons: Before I used the case, I only had the frame vinyls applied. The frame vinyls made it a bit more difficult to find and click the buttons. The case actually adds the "clicky" feeling back to the buttons. This is because the inner surface of the case that comes in contact with the buttons has protrusions that make direct contact with their perspective buttons. The vinyl no longer dampens the feedback of the buttons while using the case. The buttons are not considerably any more or less sensitive than a naked phone.
Cutouts: Please refer to pictures for cutout measurements.
Regarding the USB-C port, the cutout is sufficient. If you look closely at the picture where the phone is plugged in and laying with the screen up, you may notice that that case is slightly bulged outwards when plugged in. The stock USB-C cable makes slight contact with the case and causes the said bulging. This did not cause any difficulties when trying to plug the phone in. In fact, most probably would never even notice this at all. I'm just weird like that.
Referring to the headphone port, the cutout is enough for my headphones (which has a pretty civilian sized plug). However, I know some people like to use studio quality headphones that have huge plug heads. Those who use headphones with larger plugs may need to enlarge the cutout, but I'd venture to say that the included cutout dimension would suffice for the majority.
Referring to the camera cutout, only the area around the vital hardware are exposed. The rest of the visor is covered. Seeing that some people are afraid of shattering this glass, this may be a relief. Looking closely at the rectangle of black TPU around the camera, you'll notice the top and bottom bars are resting on the aluminum body as opposed to the glass visor (mostly). I would think this helps in the event of a dropped phone, as the impact would hopefully spread onto the aluminum body instead of the glass. I'm just guessing that would be how it works out. I'm not testing that for you guys!
Referring to the Nexus Imprint cutout, it's well bevelled. It's not rough on the fingers, but Imprint was more comfortable to use without any case (well duh). It's not difficult to put my finger onto the sensor, but it just felt like an extra edge to feel while trying to unlock the phone.
Feel in the hand: The case is actually pretty minimal. It doesn't add significant bulk to the phone, and allows the phone to still feel pretty thin. The side edges have have some ridges that add to the grippiness of the case. Aside from the vinyls, I've been running the phone without a case. The extra grip is actually much appreciated. The edges also raise the screen slightly off a flat surface when placed screen down. Huge plus because I like to leave the phone out at the dining table, but face down because I don't want the phone to interrupt my meal. The four corners of the case are also bulged ever so slightly. I assume this is good for shock dampening in the event of a corner impact drop.
Click to expand...
Click to collapse
Good review, thank you
The frosted P kills it for me, which is too bad because I like every other design aspect of it.
Elnrik said:
Good review, thank you
The frosted P kills it for me, which is too bad because I like every other design aspect of it.
Click to expand...
Click to collapse
After I get my "x only" Dbrand skins, it should look more acceptable. I'm probably still gonna end up making a true bumper out of this down the road[emoji1]
Sent from my Nexus 6P using Tapatalk
UPDATE UPDATE UPDATE: Poetic has now revised the case where the formerly intrusive "P" logo is now moved above the fingerprint sensor. The "Affinity" branding that used to be on the right edge of the case is now completely removed. All other dimensions, accents, materials, cutouts, etc. have not been changed. The updated version can be purchased from Amazon (where I acquired mine). Two additional pictures have also been added; one that compares the cases side-by-side and one with the phone in the revised case
I also received this case for review purposes, so if you don't mind, I'll just tack some of my thoughts to your review rather than creating another one? If you don't want this, just let me know!
I've been using this case for the past few days. I received the "updated" version that has the P above the fingerprint reader.
I enjoy the overall feel of the case. I like the ridges on the sides, it really allows you to get some grip on the phone, I feel less likely to drop it.
The buttons feel nice and click nicely, but because of the ridges I have a harder time finding them (and determining power from volume keys) when I'm not looking at the phone. I'm sure this will get easier over time.
I like the clear plastic on the back, I'm running mine stock without any skins, but it's still nice to see the faint nexus logo from the graphite version. As you mentioned that it felt like a snug fit, mine actually feels a little loose in some places, like the top and bottom.
The opening for the finger print reader is larger than the scanner, and I actually prefer this to one the same size as the reader. I feel like it's easier to find and unlock, and recognizes a little easier
Sent from my Nexus 6P using Tapatalk
heleos said:
I also received this case for review purposes, so if you don't mind, I'll just tack some of my thoughts to your review rather than creating another one? If you don't want this, just let me know!
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Absolutely fine by me! It's a review thread and you have some thoughts about the same product. All good
Sent from my Nexus 6P using Tapatalk
I bought this case. Overall a good case,but my phone keeps turning on in my pocket (I've butt-dialed and accidentally texted gibberish several times since getting this case)
Sent from my Nexus 6P using Tapatalk
diomark said:
I bought this case. Overall a good case,but my phone keeps turning on in my pocket (I've butt-dialed and accidentally texted gibberish several times since getting this case)
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Something sounds fishy about that. Never had that problem even once. Also, it takes a fair amount of effort and coincidence to butt dial on a 6p. Gotta press the power button, followed with a way to unlock the device, then precisely press the dialer icon, and choose someone to call. You may want to look into it a bit deeper. I've never butt dialed a single person since owning any smartphone in any configuration in the past 5 years.
Sent from my Nexus 6P using Tapatalk
I have smart lock paired with my watch, so all it takes is a swipe (which I guess it can register in my pocket) after it wakes up (which it does from power button being easy to press)
Add that opening to a hangout notification and I've had it send my location to one person and call another - plus I'm frequently finding it having typed random characters (but not necessarily sent) while in my pocket.
Sent from my Nexus 6P using Tapatalk
diomark said:
I have smart lock paired with my watch, so all it takes is a swipe (which I guess it can register in my pocket) after it wakes up (which it does from power button being easy to press)
Add that opening to a hangout notification and I've had it send my location to one person and call another - plus I'm frequently finding it having typed random characters (but not necessarily sent) while in my pocket.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
I see. Sounds like all the planets aligned. If you decide you still want to use the case, I would recommend actually shaving down the inside of the button (the side that physically touches the power button of the phone). That should cut back on the sensitivity, but it's effort that I don't know if you'd like to invest.
Design of the Poetic Affinity has changed
They have now removed the AFFINITY branding and brought the P to be above the fingerprint scanner.
Bhalraam32 said:
They have now removed the AFFINITY branding and brought the P to be above the fingerprint scanner.
Click to expand...
Click to collapse
Yep its nice. I still need to return my old ones.
good combo on the frost :good: my main concern is protection as im pretty prone to dropping my phones lol, so could u plz update on how it has held on till now, and how good is it at actually protecting the phone.
Lord. Tech said:
good combo on the frost :good: my main concern is protection as im pretty prone to dropping my phones lol, so could u plz update on how it has held on till now, and how good is it at actually protecting the phone.
Click to expand...
Click to collapse
It actually has good protection for as thin as it is due to the way its built. Very sturdy case.
OK, so I have this beautiful new phone and enjoying all of it's deliciousness.
I'm wondering what the lens material is , I'm pretty sure it's not Sapphire since it just doesn't seem to have that look, Sapphire tends to have less transparent look about it but I could be wrong. I believe it has a higer reflectivity(??) index than glass and it's actually not ideal 4 lenses and screens for this reason. Having said that maybe you wouldn't use it on a Hasselblad but its perfect for a phone.
I've had a fair bit of a look around and I can't find any mention of it. it's definitely glass but what kind?
And further to this I wonder if anyone's going to make some protection for it?
Sent from my MHA-L29 using Tapatalk
Leica will use optical glass that is designed for cameras.
Any sort of protective cover will have inferior optical qualities and reduce the picture quality.
I do agree in principal, but once you have a scratch or just the micro scratches from a year or more of use, i submit that a replacable protective cover / film will in the long term yield benefits. Two phones ago i got a sctratch on my lense and that was that! Looked like crap from then on. I always had one on my Xperia Z3 I even did some back to back comparisons on my top of the line 4K TV, I could not for the life of me tell any difference between the two. Nor could the Missus. So I left it on and replaced it a couple of times, happy days! And I'm a rough bugger so my phone's get abused
It probly has what Huawei has uses in their phones this year. I'd say the same as the p9 and honor 8