need some instructions to solve (LG G3 D850 boot verification failed ) - AT&T LG G3

Two days ago I set off on a journey to root my phone . I Followed a couple guides and every site stated that you need Twrp. The thing is im running marshmallow on the D850 and any time I try to boot my phone in recovery I get "boot verification failed" and get a black screen with the notification flashing and this even prevents me from even doing a factory reset. From lurking the forums i've learned that the best way to fix is to flash back to an older version of android but most of these guides seen old and out dated and I cant seem to find a kdz for the D850 . Thank you and your help will be very much appreciated.
also the i installed the LG USB driver (to use the LG flash tool )but Ports (COM & LPT) are not shown in device manager mostly because the phone should be on so the drivers will be shown...
Really I read many many threads and I tried to follow it but no success
I could not find D850 kdz..

qara1955 said:
Two days ago I set off on a journey to root my phone . I Followed a couple guides and every site stated that you need Twrp. The thing is im running marshmallow on the D850 and any time I try to boot my phone in recovery I get "boot verification failed" and get a black screen with the notification flashing and this even prevents me from even doing a factory reset. From lurking the forums i've learned that the best way to fix is to flash back to an older version of android but most of these guides seen old and out dated and I cant seem to find a kdz for the D850 . Thank you and your help will be very much appreciated.
also the i installed the LG USB driver (to use the LG flash tool )but Ports (COM & LPT) are not shown in device manager mostly because the phone should be on so the drivers will be shown...
Really I read many many threads and I tried to follow it but no success
I could not find D850 kdz..
Click to expand...
Click to collapse
If you follow the general back to stock guide you'll see that the D850 is TOT method only. You'd download the tot file and use LGUP to flash since your on MM
Sent from my iPhone using Tapatalk

hyelton said:
If you follow the general back to stock guide you'll see that the D850 is TOT method only. You'd download the tot file and use LGUP to flash since your on MM
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
hyelton
basic problem for me when i want to start flashing is :
Ports (COM & LPT) are not shown totally in device my manager
see the attached screenshot from your thread , it is not in device manager

qara1955 said:
hyelton
basic problem for me when i want to start flashing is :
Ports (COM & LPT) are not shown totally in device my manager
see the attached screenshot from your thread , it is not in device manager
Click to expand...
Click to collapse
Then what do you see? Your phone is in download mode correct? Using a USB 2.0 correct? And not 3.0. And if your running Windows 8/10 you've unhid the com ports.
Sent from my iPhone using Tapatalk

hyelton said:
Then what do you see? Your phone is in download mode correct? Using a USB 2.0 correct? And not 3.0. And if your running Windows 8/10 you've unhid the com ports.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
hyelton
i started LGUP but i got this message see attached

qara1955 said:
hyelton
i started LGUP but i got this message see attached
Click to expand...
Click to collapse
But awnser my questions above ^^
Sent from my iPhone using Tapatalk

hyelton said:
Then what do you see? Your phone is in download mode correct? Using a USB 2.0 correct? And not 3.0. And if your running Windows 8/10 you've unhid the com ports.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
No not in download mode it is not starting see thus photo
I have windows 7.
But regarding the ports I my device manager I solved it because I hold volume up and insert the usb cable then it was shown and I changed the port to com41
If you are asking about the usb port in my laptop yes it is usb 2
Sent from my SM-N910V using Tapatalk

qara1955 said:
No not in download mode it is not starting see thus photo
I have windows 7.
But regarding the ports I my device manager I solved it because I hold volume up and insert the usb cable then it was shown and I changed the port to com41
If you are asking about the usb port in my laptop yes it is usb 2
Sent from my SM-N910V using Tapatalk
Click to expand...
Click to collapse
That's why. You need to place the phone into download mode.
Sent from my iPhone using Tapatalk

hyelton said:
That's why. You need to place the phone into download mode.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
How to do it?
Every time I press power on with volume down it gave me this error as in the photo....
Sent from my SM-N910V using Tapatalk

qara1955 said:
How to do it?
Every time I press power on with volume down it gave me this error as in the photo....
Sent from my SM-N910V using Tapatalk
Click to expand...
Click to collapse
You don't press power.
With the phone completely off hold down vol down while plugging in the USB cable that's connected to your computer.
If that doesn't do anything try vol up instead.
Sent from my iPhone using Tapatalk

hyelton said:
You don't press power.
With the phone completely off hold down vol down while plugging in the USB cable that's connected to your computer.
If that doesn't do anything try vol up instead.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Thanks.. Now I got download mode..
Now o follow the instructions
But again when I start LGUP I have the same error
Sent from my SM-N910V using Tapatalk

qara1955 said:
Thanks.. Now I got download mode..
Now o follow the instructions
But again when I start LGUP I have the same error
Sent from my SM-N910V using Tapatalk
Click to expand...
Click to collapse
That's not the same error. That's showing its detecting the phone but it doesn't know what it is. Where you running MM 6.0 before? If not it's going to be easier to use the old kdz method.
Sent from my iPhone using Tapatalk

I just run LGUP as administrator and it is working...
Thanks a lot hyelton.... I appreciate your support
Sent from my SM-N910V using Tapatalk

Now the software downgrade to 4.4.2
So shall install Marshemllow?
Sent from my SM-N910V using Tapatalk

qara1955 said:
I just run LGUP as administrator and it is working...
Thanks a lot hyelton.... I appreciate your support
Sent from my SM-N910V using Tapatalk
Click to expand...
Click to collapse
I'm glad you got it! Your welcome
MM that depends on if you want it or not.
Sent from my iPhone using Tapatalk

hyelton said:
I'm glad you got it! Your welcome
MM that depends on if you want it or not.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Hyelton....
Do you recommend to upgrade to Android 6 or keep it on Android 4.4.2?
I need the root access ... I need the enable the wifi tethering..
Sent from my SM-N910V using Tapatalk

qara1955 said:
Hyelton....
Do you recommend to upgrade to Android 6 or keep it on Android 4.4.2?
I need the root access ... I need the enable the wifi tethering..
Sent from my SM-N910V using Tapatalk
Click to expand...
Click to collapse
As I said updating is all up to the person. If you need root not as android 6 is not rootable.
Sent from my iPhone using Tapatalk

hyelton said:
As I said updating is all up to the person. If you need root not as android 6 is not rootable.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Thanks hyelton.. It is OK now
I got rooted and I enabled wifi Hotspot
But I am wondering :
as I know if I upgrade to lollipop or Marshemllow I will lose root... So is the same will happen with wifi tethering(Hotspot )
I mean
WiFi tethering enabled in KitKat >>> upgrade from kitkat to lollipop or Marshemllow >>
Tethering will be stayed enabled or will be locked?
Sent from my SM-N910V using Tapatalk

qara1955 said:
Thanks hyelton.. It is OK now
I got rooted and I enabled wifi Hotspot
But I am wondering :
as I know if I upgrade to lollipop or Marshemllow I will lose root... So is the same will happen with wifi tethering(Hotspot )
I mean
WiFi tethering enabled in KitKat >>> upgrade from kitkat to lollipop or Marshemllow >>
Tethering will be stayed enabled or will be locked?
Sent from my SM-N910V using Tapatalk
Click to expand...
Click to collapse
You cannot update while rooted. You'd have to unroot and updating would replace the tether changes. Also it seems like your not on AT&T which you cannot update anyway unless you have an AT&T sim.
Sent from my iPhone using Tapatalk

hyelton said:
You cannot update while rooted. You'd have to unroot and updating would replace the tether changes. Also it seems like your not on AT&T which you cannot update anyway unless you have an AT&T sim.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
hyelton
yes i am outside USA ,,,,
1- so what I understand from you that it is not possible to update to marshmallow or lollipop ,,, even if i installed custom rom ???
2- if rom custom installed shall I lose wifi hotspot which was locked by att but now enabled with kitkat after root ??

Related

Help pleaseeee! Firmware upgrade encountered...

I recently bought my S2 and was trying to root it yesturday, and Odin got stuck at Setup Connection or whatever so i closed it, now im stuck at the firmware upgrade encountered screen and it wont go back to download mode...am i screwed?
I downloaded the factory stock.tar and stuff but the phone wont go back to download mode, its always at the error screen...
That is the download mode. Boot up Odin and reflash.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
merlen said:
That is the download mode. Boot up Odin and reflash.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
keeps failing
Switch USB Ports, cables. Make sure kites is closed in processes on your PC. Run Odin as admin.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
Switch USB Ports, cables. Make sure kites is closed in processes on your PC. Run Odin as admin.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
failed again...
i load it with PDA right?
acc0unt said:
failed again...
i load it with PDA right?
Click to expand...
Click to collapse
Right. Could have a bad download, or sometimes it takes a few tries. Usually it's the wrong USB port, having something running in the PC tasks, or bad cable.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
Right. Could have a bad download, or sometimes it takes a few tries. Usually it's the wrong USB port, having something running in the PC tasks, or bad cable.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
can you do it for me through teamviewer?
can you post alink for the stock fw to reflash with?
acc0unt said:
can you post alink for the stock fw to reflash with?
Click to expand...
Click to collapse
I don't know what team viewer is, but this is the stock tar I am hosting
http://forum.xda-developers.com/showthread.php?t=1668792
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
I don't know what team viewer is, but this is the stock tar I am hosting
http://forum.xda-developers.com/showthread.php?t=1668792
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
damn it i wish i could post pics
still not working ;(
message someone for help and see when they are available...then go to join.me and install that...then give said helper the 9 digit join code and then give them control

Help please.

Trying to flash new baseband on p500 and PC won't install USB drivers. Keeps stalling at saving download. Shows up in dev manager with !.
Sent from my LG-P500 using Tapatalk 2
Also I'm running blur rom works great but won't come out of standby. Really annoying any help would b much appreciated
Sent from my LG-P500 using Tapatalk 2
joethetule said:
Also I'm running blur rom works great but won't come out of standby. Really annoying any help would b much appreciated
Sent from my LG-P500 using Tapatalk 2
Click to expand...
Click to collapse
try to restart your pc
joethetule said:
Trying to flash new baseband on p500 and PC won't install USB drivers. Keeps stalling at saving download. Shows up in dev manager with !.
Sent from my LG-P500 using Tapatalk 2
Click to expand...
Click to collapse
Try after Delete / un-install any previous versions of the LG Drivers before installing the latest drivers.
Also, PC>USB Modem > Disable...
According to me u should leave baseband fix and use gtr rom its far better than blur and if u have a baseband problem in gtr just open up the terminal emulator and give the command 'su' then press enter and then 'fixbb' or maybe this command may work on blur too......
OK so anyone know how to install cm9 ICS 4.0 on LG P505 V20F .35. Ive tried everything. Either have network and data with color banding or OK color with no network or data.:banghead:
Sent from my LG-P505 using xda premium
Go to the LG website and download the usb driver's
maybe you're on the new baseband already.. is'nt it try to flash rom again, then flash new baseband
If you're really having problems, just flash the stock lg gingerbread rom, it will update your baseband.
Sent from my LG-P500 using xda app-developers app
you might also be interested in trying out jelly bean on your device:
here

[Q] Motorola Milestone XT720 bootloop/bricked PLEASE HELP

Hello XDA community, i have solved all my previous phone problems via this site so I'm hoping this will get solved too.
Ok here goes, Yesterday i flashed Brains Bravo 1.9 ROM (for the second time(i figured its the most stable and whatnot)). After doing that it started up and asked me if i wanted to turn on 3G mobile data to this i replied no and i closed it. After that i turned off the phone (because i was getting all kinds of errors i have gotten before and solved by wiping everything.) As i was turning the phone on i noticed it was at the 1st Moto logo was on for a few seconds and then the screen turned off ,and back on. This time in a bootloop. i have tried using a different battery, pulling out the SIM and SD card but same thing happens i can't get it into recovery mode but i can get it into bootloader. So i figured its time to flash the stock SBF file and re do this whole process. While in RSD Lite i noticed that the screen kept flickering for a second or two and then it was fine. While it was nearing the end of the process (while it was rebooting) it suddenly said "please turn on phone manually" but the phone was stuck in a boot loop while it said this but the progress bar said 100% complete.
So xda community PLEASE HELP ME! :crying: , I really like this phone and i dot want to get a new one
PS: this is my first post so sorry if it isnt perfect.
PPS: last time i flashed bravo i applied the notification update but this time i forgot (just in case this info helps)
hopefully somone will have some answers and maby even a solution. :fingers-crossed:
Thanks for listening err. reading.
Do have a milestone xt720 or a motoroi xt720?
Sent from my XT720 using xda premium
reply
mchlbenner said:
Do have a milestone xt720 or a motoroi xt720?
Sent from my XT720 using xda premium
Click to expand...
Click to collapse
i have a factory unlocked european motorola milestone xt720 from england
added problem
i forgot to mention just now i cannot charge i am using a battery from a dofferent phone just to turn it on and in bootloader
Does your phone go only to bootloader.
Sent from my XT720 using xda premium
mchlbenner said:
Does your phone go only to bootloader.
Sent from my XT720 using xda premium
Click to expand...
Click to collapse
it goes into bootloader if i put in into it otherwise its only bootloop
help
Wrong link
I hope this link works if it does flash this sbf.
Download android download tool ADT
Install USB drivers
Connect device to pc using usb chord.
Boot into bootloader
Let pc install all drivers
etc etc.
IN ERASE TICK BOOT,SYSTEM,USERDATA
Now try to flash a firmware.
Sent from my A60 using xda app-developers app
ok
thanks ill try both
yash.pranjale86 said:
Download android download tool ADT
Install USB drivers
Connect device to pc using usb chord.
Boot into bootloader
Let pc install all drivers
etc etc.
IN ERASE TICK BOOT,SYSTEM,USERDATA
Now try to flash a firmware.
Sent from my A60 using xda app-developers app
Click to expand...
Click to collapse
Hold on wait to get some links for you what p.c are you using windows ?
You need to have motorola drivers installed.
Sent from my SGH-T759 using xda premium
doesnt work
i tried flashing that file but rsd cant find it and i still have to try the adt option ill report back in a few hours so ill let you know
link
you have to have motorola usb drivers installed flash with rsd lite.
Use must rsd lite when flashing sbf unless you mack.
Any other tools may brick your phone.
http://android.fjfalcon.com/xt720/sbf/STR_U2_03.20.1.sbf
Try this one what windows are you using
mchlbenner said:
Hold on wait to get some links for you what p.c are you using windows ?
You need to have motorola drivers installed.
Sent from my SGH-T759 using xda premium
Click to expand...
Click to collapse
im using windows 7 rsd lite 5.6
mchlbenner said:
Wrong link
I hope this link works if it does flash this sbf.
Click to expand...
Click to collapse
i cant see a link
details! details!
yash.pranjale86 said:
Download android download tool ADT
Install USB drivers
Connect device to pc using usb chord.
Boot into bootloader
Let pc install all drivers
etc etc.
IN ERASE TICK BOOT,SYSTEM,USERDATA
Now try to flash a firmware.
Sent from my A60 using xda app-developers app
Click to expand...
Click to collapse
WOAH! im going to need a lot more deatiailed expanation from somone ive only used this once before an i was completly lost :silly:
A quick question
Just a quick question, Has anyone seen anything similar to my problem?
REPUBLIKASRPSKA said:
WOAH! im going to need a lot more deatiailed expanation from somone ive only used this once before an i was completly lost :silly:
Click to expand...
Click to collapse
Go to motorola and make sure you have right usb drivers instilled.
Sent from my XT720 using xda premium
ok tell me the next step now
mchlbenner said:
Go to motorola and make sure you have right usb drivers instilled.
Sent from my XT720 using xda premium
Click to expand...
Click to collapse
ok next step
Found somthing
i found a interestingly similar post to mine but i havent used any switcher
http://forum.xda-developers.com/showthread.php?t=1089148

[Q] I unroot my nexus with toolkit

I root my nexus with 4.4.3 version , after a week I decided to unroot my nexus with "toolkit".
I decides Instead the program will download the file for me, I will download the file from google's site :
after I download the file I click on:
after that I click "ok" to start unroot my nexus .
and after all this I lock my bootloader
so after that I will can to install the updates I will get like version "L"? ?
If you're fully stock then yes.
Please try to avoid using toolkits. Manual process is better.
FYI, can still get updates if rooted.
All guides and info threads are linked in my signature.
Sent from my Nexus 5 using Tapatalk < Yes, I want you to know that I'm using a mobile client
rootSU said:
If you're fully stock then yes.
Please try to avoid using toolkits. Manual process is better.
FYI, can still get updates if rooted.
All guides and info threads are linked in my signature.
Sent from my Nexus 5 using Tapatalk < Yes, I want you to know that I'm using a mobile client
Click to expand...
Click to collapse
ok, I hope you right, because once I root my phone with "towel root" and after that I got update to 4.4.4 version sp I press to download the new version to install, and my nexus say: "error"
nevo2011 said:
ok, I hope you right, because once I root my phone with "towel root" and after that I got update to 4.4.4 version sp I press to download the new version to install, and my nexus say: "error"
Click to expand...
Click to collapse
I am right. There is an entire ota thread, via my signature
Sent from my Nexus 5 using Tapatalk < Yes, I want you to know that I'm using a mobile client

New to root

I have just a few questions. For some if you can assist then thank you that would be appreciated. I simply don't look to mod crazy **** on my phone just wanna flash or mod a nice theme that gives me a better look in the messaging and calling areas of my LG G2, thing is I can't find no Roms for the LG-D803. Any suggestions pls?
Sent from my LG-D803 using XDA Free mobile app
skrapmetal21 said:
I have just a few questions. For some if you can assist then thank you that would be appreciated. I simply don't look to mod crazy **** on my phone just wanna flash or mod a nice theme that gives me a better look in the messaging and calling areas of my LG G2, thing is I can't find no Roms for the LG-D803. Any suggestions pls?
Sent from my LG-D803 using XDA Free mobile app
Click to expand...
Click to collapse
Try Xposed Framwork
Hi, to modify only icons you can install another launcher (nova, google launcher...).
If you want to modify also some parts of rom (icons, status bar, dialer, sms interface etc.) you have many possibility: costum rom (cyano or other), xposed framework, modifications via recovery etc. For all of them (except the first) you need root and a costum recovery.
I try to install twrp recovery and my phone always bricks and i end up spending a whole night rebooting flashing the stock usb drivers and **** cause the phone just doesnt even stay on a screen just goes black. Ive wanted the cynageon mod but i heard its not compatible with the D803(canada version) so it leaves me using like G2 exposed app which needs xposed framework but even then it doesnt wanna install the framework. Have you heard of this issue ?
Sent from my LG-D803
skrapmetal21 said:
I try to install twrp recovery and my phone always bricks and i end up spending a whole night rebooting flashing the stock usb drivers and **** cause the phone just doesnt even stay on a screen just goes black. Ive wanted the cynageon mod but i heard its not compatible with the D803(canada version) so it leaves me using like G2 exposed app which needs xposed framework but even then it doesnt wanna install the framework. Have you heard of this issue ?
Sent from my LG-D803
Click to expand...
Click to collapse
Running Lollipop?
No just 4.4.2 normal LG software. Its weird tho like i installed the usb drivers in the beginning and when i was finally able to recover my it was the updated software. Not sure what it was before i bricked it the once lol. I was and still am new and still studying up as much as i can on everything. Just have the trait of when i really want something i crave and thrive to work until i can get it. So i been searching everywhere for answers. You think xposed is the way to go ?
Sent from my LG-D803
skrapmetal21 said:
No just 4.4.2 normal LG software. Its weird tho like i installed the usb drivers in the beginning and when i was finally able to recover my it was the updated software. Not sure what it was before i bricked it the once lol. I was and still am new and still studying up as much as i can on everything. Just have the trait of when i really want something i crave and thrive to work until i can get it. So i been searching everywhere for answers. You think xposed is the way to go ?
Click to expand...
Click to collapse
Xposed is one of the best things for a rooted device!
Will do more research for you tomorrow when I'm gonna be by my pc.
PS: Next time you reply pls quote me so I can know that you replied to me...
Newyork! said:
Xposed is one of the best things for a rooted device!
Will do more research for you tomorrow when I'm gonna be by my pc.
PS: Next time you reply pls quote me so I can know that you replied to me...
Click to expand...
Click to collapse
Sorry, never reallly had gone to this extent getting on a forum and, that would be highly highly appreciated beyond words.
Sent from my LG-D803
skrapmetal21 said:
I try to install twrp recovery and my phone always bricks and i end up spending a whole night rebooting flashing the stock usb drivers and **** cause the phone just doesnt even stay on a screen just goes black. Ive wanted the cynageon mod but i heard its not compatible with the D803(canada version) so it leaves me using like G2 exposed app which needs xposed framework but even then it doesnt wanna install the framework. Have you heard of this issue ?
Sent from my LG-D803
Click to expand...
Click to collapse
Probably you bricked the device because the TWRP was not compatible with your model (i.e. it was for international version or other).
Recovery, kernel etc. are .img files that are specific for your phone model, if you overwrite one of them with a different/non correct version during flash you brick your phone. For LG, if you can enter in download mode, you can easily restore everything using LG Flash tool 2014 (you need also LG drivers for windows).
To obtain TWRP recovery you can see here (for 4.4.2):
droidviews.com/install-twrp-recovery-on-lg-g2-running-android-4-4-2-kitkat/
you have to download the correct version for your model...
Ive tried to install from the link but it honestly keeps saying "loki cant find something, cant let you flash" do you know how to resolve this issue? Any help would be helpful pls and thanks
Sent from my LG-D803
vime81 said:
Probably you bricked the device because the TWRP was not compatible with your model (i.e. it was for international version or other).
Recovery, kernel etc. are .img files that are specific for your phone model, if you overwrite one of them with a different/non correct version during flash you brick your phone. For LG, if you can enter in download mode, you can easily restore everything using LG Flash tool 2014 (you need also LG drivers for windows).
To obtain TWRP recovery you can see here (for 4.4.2):
droidviews.com/install-twrp-recovery-on-lg-g2-running-android-4-4-2-kitkat/
you have to download the correct version for your model...
Click to expand...
Click to collapse
I tried and it just says loki cannot let you flash, how do i resolve this? Any help would be appreciated greatly thank you
Sent from my LG-D803
skrapmetal21 said:
Ive tried to install from the link but it honestly keeps saying "loki cant find something, cant let you flash" do you know how to resolve this issue? Any help would be helpful pls and thanks
Sent from my LG-D803
Click to expand...
Click to collapse
Just to understand and try to help you, now you are running a ROM or your phone is erased? Lollipop or KitKat? You can enter in download mode?
vime81 said:
Just to understand and try to help you, now you are running a ROM or your phone is erased? Lollipop or KitKat? You can enter in download mode?
Click to expand...
Click to collapse
Im running 4.4.2 stock lg g2 firmware no custom rom or anything. I can enter download mode. I just want a different theme/interface im really picky like that but i.cant seem to find one at all
Sent from my LG-D803
OK, are you rooted? If not first you have to root your phone (in that page you can find link to root), than you can install recovery...
vime81 said:
OK, are you rooted? If not first you have to root your phone (in that page you can find link to root), than you can install recovery...
Click to expand...
Click to collapse
I am rooted have been for a while. Just never could find any.roms to flash with the D803 LgG2....its so frustrating
Sent from my LG-D803
skrapmetal21 said:
I am rooted have been for a while. Just never could find any.roms to flash with the D803 LgG2....its so frustrating
Sent from my LG-D803
Click to expand...
Click to collapse
First look here:
forum.xda-developers.com/showthread.php?t=2611749
and also here:
www.android.gs/install-slimlp-android-5-0-2-alpha-1-custom-rom-for-canadian-lg-g2-d803
Anyway to perform only some customizations you can install Xposed framework and modules
Inviato dal mio LG G PAD 8.3 utilizzando Tapatalk
Ehi
Can i root ace2?
vime81 said:
First look here:
forum.xda-developers.com/showthread.php?t=2611749
and also here:
www.android.gs/install-slimlp-android-5-0-2-alpha-1-custom-rom-for-canadian-lg-g2-d803
Anyway to perform only some customizations you can install Xposed framework and modules
Inviato dal mio LG G PAD 8.3 utilizzando Tapatalk
Click to expand...
Click to collapse
Ive looked every where i cant seem to get any twrp or cwm or a flash tool to work on my phone i end up bricking the phone and spend all night installing the oem drivers back
Sent from my LG-D803 using XDA Free mobile app
Ok but it's not clear how you bricked your device and you wrote that you cannot find rom for your device... so those link...
TWRP for Canadian devices exist... probably you have already seen here:
http://forum.xda-developers.com/showthread.php?t=2449670
what fails when you try to flash recovery?
vime81 said:
Ok but it's not clear how you bricked your device and you wrote that you cannot find rom for your device... so those link...
TWRP for Canadian devices exist... probably you have already seen here:
http://forum.xda-developers.com/showthread.php?t=2449670
what fails when you try to flash recovery?
Click to expand...
Click to collapse
I kno they link when i said i cant find a rom for my devices i meant for my Canadian G2D803. All the rooms would be for the d802 or 980..im running stock drivers cause after i bricked it i ushed the flash tool to update all the new drivers i got from LG. And when i try and install twrp or anything it says cannot lokify
Sent from my LG-D803 using XDA Free mobile app

Categories

Resources