[Q] Motorola Milestone XT720 bootloop/bricked PLEASE HELP - Milestone XT720 General

Hello XDA community, i have solved all my previous phone problems via this site so I'm hoping this will get solved too.
Ok here goes, Yesterday i flashed Brains Bravo 1.9 ROM (for the second time(i figured its the most stable and whatnot)). After doing that it started up and asked me if i wanted to turn on 3G mobile data to this i replied no and i closed it. After that i turned off the phone (because i was getting all kinds of errors i have gotten before and solved by wiping everything.) As i was turning the phone on i noticed it was at the 1st Moto logo was on for a few seconds and then the screen turned off ,and back on. This time in a bootloop. i have tried using a different battery, pulling out the SIM and SD card but same thing happens i can't get it into recovery mode but i can get it into bootloader. So i figured its time to flash the stock SBF file and re do this whole process. While in RSD Lite i noticed that the screen kept flickering for a second or two and then it was fine. While it was nearing the end of the process (while it was rebooting) it suddenly said "please turn on phone manually" but the phone was stuck in a boot loop while it said this but the progress bar said 100% complete.
So xda community PLEASE HELP ME! :crying: , I really like this phone and i dot want to get a new one
PS: this is my first post so sorry if it isnt perfect.
PPS: last time i flashed bravo i applied the notification update but this time i forgot (just in case this info helps)
hopefully somone will have some answers and maby even a solution. :fingers-crossed:
Thanks for listening err. reading.

Do have a milestone xt720 or a motoroi xt720?
Sent from my XT720 using xda premium

reply
mchlbenner said:
Do have a milestone xt720 or a motoroi xt720?
Sent from my XT720 using xda premium
Click to expand...
Click to collapse
i have a factory unlocked european motorola milestone xt720 from england

added problem
i forgot to mention just now i cannot charge i am using a battery from a dofferent phone just to turn it on and in bootloader

Does your phone go only to bootloader.
Sent from my XT720 using xda premium

mchlbenner said:
Does your phone go only to bootloader.
Sent from my XT720 using xda premium
Click to expand...
Click to collapse
it goes into bootloader if i put in into it otherwise its only bootloop

help
Wrong link
I hope this link works if it does flash this sbf.

Download android download tool ADT
Install USB drivers
Connect device to pc using usb chord.
Boot into bootloader
Let pc install all drivers
etc etc.
IN ERASE TICK BOOT,SYSTEM,USERDATA
Now try to flash a firmware.
Sent from my A60 using xda app-developers app

ok
thanks ill try both

yash.pranjale86 said:
Download android download tool ADT
Install USB drivers
Connect device to pc using usb chord.
Boot into bootloader
Let pc install all drivers
etc etc.
IN ERASE TICK BOOT,SYSTEM,USERDATA
Now try to flash a firmware.
Sent from my A60 using xda app-developers app
Click to expand...
Click to collapse
Hold on wait to get some links for you what p.c are you using windows ?
You need to have motorola drivers installed.
Sent from my SGH-T759 using xda premium

doesnt work
i tried flashing that file but rsd cant find it and i still have to try the adt option ill report back in a few hours so ill let you know

link
you have to have motorola usb drivers installed flash with rsd lite.
Use must rsd lite when flashing sbf unless you mack.
Any other tools may brick your phone.
http://android.fjfalcon.com/xt720/sbf/STR_U2_03.20.1.sbf
Try this one what windows are you using

mchlbenner said:
Hold on wait to get some links for you what p.c are you using windows ?
You need to have motorola drivers installed.
Sent from my SGH-T759 using xda premium
Click to expand...
Click to collapse
im using windows 7 rsd lite 5.6

mchlbenner said:
Wrong link
I hope this link works if it does flash this sbf.
Click to expand...
Click to collapse
i cant see a link

details! details!
yash.pranjale86 said:
Download android download tool ADT
Install USB drivers
Connect device to pc using usb chord.
Boot into bootloader
Let pc install all drivers
etc etc.
IN ERASE TICK BOOT,SYSTEM,USERDATA
Now try to flash a firmware.
Sent from my A60 using xda app-developers app
Click to expand...
Click to collapse
WOAH! im going to need a lot more deatiailed expanation from somone ive only used this once before an i was completly lost :silly:

A quick question
Just a quick question, Has anyone seen anything similar to my problem?

REPUBLIKASRPSKA said:
WOAH! im going to need a lot more deatiailed expanation from somone ive only used this once before an i was completly lost :silly:
Click to expand...
Click to collapse
Go to motorola and make sure you have right usb drivers instilled.
Sent from my XT720 using xda premium

ok tell me the next step now

mchlbenner said:
Go to motorola and make sure you have right usb drivers instilled.
Sent from my XT720 using xda premium
Click to expand...
Click to collapse
ok next step

Found somthing
i found a interestingly similar post to mine but i havent used any switcher
http://forum.xda-developers.com/showthread.php?t=1089148

Related

[Q] My D2G won't SBF - I've tried everything :(

okay guys here's my issue. I was flashing over to liberty and I forgot to wipe everything so as liberty was going through its stuff through bootstrap I pulled the battery hoping to stop the process.
HOWEVER, I am not stuck at the "liberty" logo. I have tried to sbf and I am getting....
failed flashing process: Phone (0000): Phone did not re-enumerate after RAM-downloader was sent. (0x703E) phone was disconnected.
Can someone please help me?
Try stock rom in linux, in this site there are many instructions about how to put the SBF file using linux. (use wubi to install linux over a windows system).
SuperPuma said:
Try stock rom in linux, in this site there are many instructions about how to put the SBF file using linux. (use wubi to install linux over a windows system).
Click to expand...
Click to collapse
Anyway you can link me? I'm using a macbook pro with vmware running windows xp and windows 7.
Sent from my DROIDX using Tapatalk
I was only able to do it on xp
Sent from my DROID2 GLOBAL using XDA App
Ah finally got it back up and running on xp.
Sent from my DROID2 GLOBAL using Tapatalk
nickb2005 said:
Ah finally got it back up and running on xp.
Sent from my DROID2 GLOBAL using Tapatalk
Click to expand...
Click to collapse
wanna share how? It might help others (or me) should we do the same
Edit: i just saw how on your other thread, now i know i cant use my mac pro to SBF, better hang on to my old win xp laptop
JorgeNava said:
wanna share how? It might help others (or me) should we do the same
Edit: i just saw how on your other thread, now i know i cant use my mac pro to SBF, better hang on to my old win xp laptop
Click to expand...
Click to collapse
Yeah its def weird because I have a droid x too and I have sbf'ed through my pro with windows 7 but for some reason my d2g wouldn't unless I used a standalone xp computer.... slightly annoying haha
Sent from my DROID2 GLOBAL using Tapatalk
Yeah, the RSD software seems to be very temperamental on anything other than XP. Sometimes it works, sometimes it doesn't.
it also depends what version of RSD lite you use. The best 4.9 or 5.0 (requirement for Atrix)
nickb2005 said:
okay guys here's my issue. I was flashing over to liberty and I forgot to wipe everything so as liberty was going through its stuff through bootstrap I pulled the battery hoping to stop the process.
HOWEVER, I am not stuck at the "liberty" logo. I have tried to sbf and I am getting....
failed flashing process: Phone (0000): Phone did not re-enumerate after RAM-downloader was sent. (0x703E) phone was disconnected.
Can someone please help me?
Click to expand...
Click to collapse
Have you tried the ezsbf tool. Follow this link to my post. Linkb is near the top...
http://forum.xda-developers.com/showthread.php?p=7088
Droid2 Global CM4D2G-GB-20120218 ***CM7 x13thangelx Kang***
Please calm down, my friend,
I think it wring in progress.
Try to enter the boot loader by press and hold X button then turn on the phone until you see the triangle droid. Press both 2 volume buttons to enter the bootloader then wipe.
Sent from my DROID2 using XDA
dttung80 said:
Please calm down, my friend,
I think it wring in progress.
Try to enter the boot loader by press and hold X button then turn on the phone until you see the triangle droid. Press both 2 volume buttons to enter the bootloader then wipe.
Sent from my DROID2 using XDA
Click to expand...
Click to collapse
That's Recovery not bootloader. .. Bootloader is for flash sbf file
Sent from my DROID2 GLOBAL using xda premium
zyy757 said:
That's Recovery not bootloader. .. Bootloader is for flash sbf file
Sent from my DROID2 GLOBAL using xda premium
Click to expand...
Click to collapse
And I think wipe cannot help anything about flash sbf
Sent from my DROID2 GLOBAL using xda premium
zyy757 said:
That's Recovery not bootloader. .. Bootloader is for flash sbf file
Sent from my DROID2 GLOBAL using xda premium
Click to expand...
Click to collapse
Sorry, press UP button in keyboard, not press X.
Sent from my DROID2 using XDA
dttung80 said:
Sorry, press UP button in keyboard, not press X.
Sent from my DROID2 using XDA
Click to expand...
Click to collapse
Press x button in keyboard and hold it, then press POWER button, is for recovery,you can wipe in recovery. Hold VOLUME+ and camera then press POWER button for bootloader, you can flash .sbf files in bootloader
Sent from my DROID2 GLOBAL using xda premium
TexF18 said:
I was only able to do it on xp
Sent from my DROID2 GLOBAL using XDA App
Click to expand...
Click to collapse
HOW DO I INSTALL THIS AS I AM LOOPTY LOOP AFTER FLASHING A CUSTOM ??? I HAD cwm BUT IT WILL ONLY TAKE ME TO THE STOCK ROM NOW FOR SOME REASON??? please advise
sdwyz74 said:
HOW DO I INSTALL THIS AS I AM LOOPTY LOOP AFTER FLASHING A CUSTOM ??? I HAD cwm BUT IT WILL ONLY TAKE ME TO THE STOCK ROM NOW FOR SOME REASON??? please advise
Click to expand...
Click to collapse
I don't know what exactly you want to do. More information about what you have going on and what you are trying to accomplish would make it easier to help you.
Before we do anything though,
DID YOU TAKE THE .629 UPDATE?
If you did you are F=&%ed.
If you did not update,
To get back to stock you can SBF.
Have you tried the ezsbf tool. Follow this link to my post. Link is near the top...
http://forum.xda-developers.com/showthread.php?p=7088
Sent from my DROID2 GLOBAL using Tapatalk 2 Beta-5
ElectroGeek said:
I don't know what exactly you want to do. More information about what you have going on and what you are trying to accomplish would make it easier to help you.
Before we do anything though,
DID YOU TAKE THE .629 UPDATE?
If you did you are F=&%ed.
If you did not update,
To get back to stock you can SBF.
Have you tried the ezsbf tool. Follow this link to my post. Link is near the top...
http://forum.xda-developers.com/showthread.php?p=7088
Sent from my DROID2 GLOBAL using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
to be honest i did not know what update or software i had i just knew it was rooted and i flashed the hexen rom!!!!!!! my fault may have cost me my phone ??? please advise thanks to all
ElectroGeek said:
I don't know what exactly you want to do. More information about what you have going on and what you are trying to accomplish would make it easier to help you.
Before we do anything though,
DID YOU TAKE THE .629 UPDATE?
If you did you are F=&%ed.
If you did not update,
To get back to stock you can SBF.
Have you tried the ezsbf tool. Follow this link to my post. Link is near the top...
http://forum.xda-developers.com/showthread.php?p=7088
Sent from my DROID2 GLOBAL using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
also just ran the link and its dead ??? please advise

[Q] How to recieve OTA 4.1.2 for Nexus S

Hey i am not a noob but am spoilt by spoonfeeding.So please can someone casually explain how to be able to update from soju to yakju?
I am UNROOTED and want it PURE STOCK.Thanks,India
Nezam said:
Hey i am not a noob but am spoilt by spoonfeeding.So please can someone casually explain how to be able to update from soju to yakju?
I am UNROOTED and want it PURE STOCK.Thanks,India
Click to expand...
Click to collapse
yakju is for galaxy nexus!
to update to jellybean 4.1.2 stock follow this thread:
http://forum.xda-developers.com/showthread.php?t=1572307
Cascabreu said:
yakju is for galaxy nexus!
to update to jellybean 4.1.2 stock follow this thread:
http://forum.xda-developers.com/showthread.php?t=1572307
Click to expand...
Click to collapse
Sorry i was talking about soju only.
So does that link help me?
Nezam said:
Sorry i was talking about soju only.
So does that link help me?
Click to expand...
Click to collapse
Are you completely stock (never flash anything and never root) or you root the phone and later unroot it? If you have a stock rom without any modification you have just to wait the official OTA if not the link have all information that you need to obtain a complete stock 4.1.2, in it you can find official google rom.
Yes i am completely stock.So currently which are the countries recieving the update?Any clue on how much ae we gonna wait?
ps.i am in india.
Sent from my Nexus S using xda app-developers app
Nezam said:
Sorry i was talking about soju only.
So does that link help me?
Click to expand...
Click to collapse
Yes that link is for nexus s
Sent from my Nexus S using xda app-developers app
Nezam said:
Yes i am completely stock.So currently which are the countries recieving the update?Any clue on how much ae we gonna wait?
ps.i am in india.
Sent from my Nexus S using xda app-developers app
Click to expand...
Click to collapse
If you are completely stock you have only to wait, at the moment nobody have received OTA on Nexus S and nobody know when it will arrive but we can assume that we have to wait only some days...
Right now recieving the update hee in india.alhumdulillah
Edit:
my update is stuck at 15 mb remaining and cant seem to progress.. is there any way i can redownload the whole update again?
Sent from my Nexus S using xda app-developers app
Nezam said:
Right now recieving the update hee in india.alhumdulillah
Edit:
my update is stuck at 15 mb remaining and cant seem to progress.. is there any way i can redownload the whole update again?
Sent from my Nexus S using xda app-developers app
Click to expand...
Click to collapse
Try this: hit menu and go to application and to All Application. Search for Google Services Framework and select it. Delete Data and come back to system setting --> Info device --> System update and hit check now.
Thanx for trying to help
I did wat you said but now i can not getting the update downloaded no matter hw much i click check now..
Plz help.
Sent from my Nexus S using xda app-developers app
Nezam said:
Thanx for trying to help
I did wat you said but now i can not getting the update downloaded no matter hw much i click check now..
Plz help.
Sent from my Nexus S using xda app-developers app
Click to expand...
Click to collapse
Sorry but without unlock your bootloader and root I'm not able to help you but try to ask also here, we are talking about 4.1.2 OTA and there are a lot of users with a lot of experience:
http://forum.xda-developers.com/showthread.php?t=1932832
Dont tell me that... there gt to b A way... r8?
Sent from my Nexus S using xda app-developers app
Nezam said:
Dont tell me that... there gt to b A way... r8?
Sent from my Nexus S using xda app-developers app
Click to expand...
Click to collapse
There is a way to manually update without root and unlock, you have to download your version of OTA from the thread that I suggested you and you have to learn to use adb commands. I personally tested this method on my device and it work.
You have to find a guide to install Android SDK on your PC and to learn how send adb command with android sdk (you have to open DOS command prompt and go to directory where you have installed android sdk to the folder adb...).
With this correctly installed, without any root and unlock, with some terminal commands you can manually update your device, at the end it will be completely stock without ony modifications.
After you have installed android sdk, procedure to update is this:
Connect your phone to your PC.
Reboot your device in recovery mode so power off nexus, power on by pressing both power+volume up, select recovery with volume keys and push power to confirm. And android with red triangle appear, push power and volume up to enter in recovery mode.
Select "Apply update from ADB".
On your PC copy the OTA from downloaded from the other thread in the folder with the ADB binary (adb.exe) in your SDK installation and rename the OTA as update.zip (not necessary but in this way is more easy).
On your PC open command prompt and go to folder with the ADB binary.
On your PC command prompt write "adb devices" to see if your nexus is correctly connected (have to appear a long serial number)
If yes, write this command: "adb sideload update.zip"
At the end reboot and you have a completely stock updatewithout modifications.
Nezam said:
Dont tell me that... there gt to b A way... r8?
Sent from my Nexus S using xda app-developers app
Click to expand...
Click to collapse
A second method that I read is to try to delete your google account and later insert it again and wait sync. I didn't try this, I prefer to learn how to use adb...
Thanks for helpin me out.i cleared data 2 - 3 times before i got the update again.It took me all day to download 15 mb though even after having a hi speed connection.
Thanks for the adb tip.
Sent from my Nexus S using xda app-developers app
Nezam said:
Thanks for helpin me out.i cleared data 2 - 3 times before i got the update again.It took me all day to download 15 mb though even after having a hi speed connection.
Thanks for the adb tip.
Sent from my Nexus S using xda app-developers app
Click to expand...
Click to collapse
No problem, for me data clearing didn't worked this time, I didn't want to wait anymore so I decide to use adb!
If I helped you, just click on "thank" button at the bottom of my post.

ICS update fail

Hey guys,
Tried installing ICS with my rooted ATRIX2. It failed so I did some reading found out you had to unroot to update. Went back unrooted and still the update fails. I rooted with casual public beta. Unrooted using the one click method. No idea how to flash my phone to a different rom. Any help would be greatly appreciated. Trying to update and root again.
Adam
KizMo said:
Hey guys,
Tried installing ICS with my rooted ATRIX2. It failed so I did some reading found out you had to unroot to update. Went back unrooted and still the update fails. I rooted with casual public beta. Unrooted using the one click method. No idea how to flash my phone to a different rom. Any help would be greatly appreciated. Trying to update and root again.
Adam
Click to expand...
Click to collapse
So you was rooted on 2.3.6 right?
If so you need to just fxz back to gb 2.3.6, and then try the ota. But beware, the ota has no fxz to save you in case of a screw up.
Fxz found here:
http://forum.xda-developers.com/showthread.php?p=32113181
Explanation on how to fxz here:
http://forum.xda-developers.com/showthread.php?p=20389449
Also this should be in Q&A
Sent from my MB865 using xda premium
Even if you have unrooted, if you deleted any of the stock apps, or still have a custom recovery set up at boot, then the update won't work. Like previously stated, you need to FXZ back to completely stock gingerbread, then run the update. I had the same issue.
Sent from my MB865 using xda app-developers app
Delete the files that installed by bootstrap recovery app if you have installed it before.
Sent from my ME865 using xda premium
Alright thanks guys. And yes I was rooted on 2.3.6. Now should I remove my micro SD when I downgrade?
Sent from my MB865 using xda app-developers app
KizMo said:
Alright thanks guys. And yes I was rooted on 2.3.6. Now should I remove my micro SD when I downgrade?
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
No need for that
Sent from my ME865 using xda app-developers app
question about update to ICS
Noticed a lot of people having problems with Battery( not charging) going dead quickly due to media files. any comments would be helpful and Thanks.
Ok i followed all the steps loaded my phone into fastboot flash, installed the drivers, download rsd lite 5.7, and I cant get RSD Lite to recognize my phone. I uninstalled and re installed the necessary drivers and still nothing. I also noticed when picking a file in RSD Lite when I go to select a file there are two. (edison-user 2.3.6 5.5.1-175_EDMR1.25 5.51.175.25 release-keys2011-11-16 23:52 Off.Bld LUD_EDISON_R1D7_PATCH_36_111116_2336 crh1090280_M570_PC_CARD_RAIN) or (ndp). I am assuming that I need to flash the first file.
Any help on where I went wrong or why it isnt recognizing my phone would be greatly appreciated. Sorry I am a noob to modding phones. I promise I learn quickly and appreciate your patience.
Adam
KizMo said:
Ok i followed all the steps loaded my phone into fastboot flash, installed the drivers, download rsd lite 5.7, and I cant get RSD Lite to recognize my phone. I uninstalled and re installed the necessary drivers and still nothing. I also noticed when picking a file in RSD Lite when I go to select a file there are two. (edison-user 2.3.6 5.5.1-175_EDMR1.25 5.51.175.25 release-keys2011-11-16 23:52 Off.Bld LUD_EDISON_R1D7_PATCH_36_111116_2336 crh1090280_M570_PC_CARD_RAIN) or (ndp). I am assuming that I need to flash the first file.
Any help on where I went wrong or why it isnt recognizing my phone would be greatly appreciated. Sorry I am a noob to modding phones. I promise I learn quickly and appreciate your patience.
Adam
Click to expand...
Click to collapse
Did you turn on USB debugging before going into AP fastboot?
Sent from my MB865 using xda premium
(Edit) I did intact have it enabled. Still no dice.
Sent from my MB865 using xda app-developers app
OK try using a different computer. It has worked for others.
Sent from my MB865 using xda premium

[Q] how to fix samsung galaxy sgt959v hard brick

please help
I tried to flash cyanogemod 4.2.2 on my galaxy s, everey step good, fisrt root, then install a recobery, then fhash a rom.
but it give a mistake while the instalation, i downloaded a diferent custom rom and give the same mistake
then I tried to restore the backup and the same mistake after that only I can enter on downloading mode and tried to frach a stock rom, and nothing, tried diferent stock rom and nothing.
the last tried the celphone don't turn on.
I think this cellphone is hard briked but I don't know how to fix it.
hackeadorazo said:
please help
I tried to flash cyanogemod 4.2.2 on my galaxy s, everey step good, fisrt root, then install a recobery, then fhash a rom.
but it give a mistake while the instalation, i downloaded a diferent custom rom and give the same mistake
then I tried to restore the backup and the same mistake after that only I can enter on downloading mode and tried to frach a stock rom, and nothing, tried diferent stock rom and nothing.
the last tried the celphone don't turn on.
I think this cellphone is hard briked but I don't know how to fix it.
Click to expand...
Click to collapse
Can you get in download mode or recovery?
Sent from my Amazon Kindle Fire using XDA Premium 4 mobile app
hutson23 said:
Can you get in download mode or recovery?
Sent from my Amazon Kindle Fire using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No, it don't turn on, and that is The problem,
To get into download mode
Remove battery & plug in usb cord to computer. While holding both*[Volume Down/Up]*buttons, drop in battery.
Does computer give up any notification? Sometimes a black screen is still download mode.
So you flashed a galaxy s ROM on this model?
Sent from my SGH-T959V using xda premium
champ1919 said:
To get into download mode
Remove battery & plug in usb cord to computer. While holding both*[Volume Down/Up]*buttons, drop in battery.
Does computer give up any notification? Sometimes a black screen is still download mode.
Click to expand...
Click to collapse
I tried your method, but the computer does not give up any notification.
how can i do?
jtag?
replace board?
Fluidification said:
So you flashed a galaxy s ROM on this model?
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
the first time I flashed galaxy s vibrant from cyanogemod on my cellphone, but it gave me a mistake, then I tried another rom from xda and it gave me the same mistake, after that I tried to restore a backup and I could not.
so the cellphone just get downloading mode and I tried fhash a rom with odim, odim flased it but when odim restart the phone it never turn on.
sorry for my bad english, I'm from dominican republic
thanks.
is your phone a t959 or t959v?
Sent from my OUYA Console using XDA Premium HD app
TwitchyEye said:
is your phone a t959 or t959v?
Sent from my OUYA Console using XDA Premium HD app
Click to expand...
Click to collapse
my phone is t959v.
I believe that the problem started when I flashed a wrong kernel or wrong rom
hackeadorazo said:
my phone is t959v.
I believe that the problem started when I flashed a wrong kernel or wrong rom
Click to expand...
Click to collapse
Check out this old thread. I doubt Adam will still do the mod for that price, but, I'm sure he will point you in right direction.
http://forum.xda-developers.com/showthread.php?p=19651020
Edit: Try the method to put a vibrant into download mode. I've forgotten that combination
Sent from my SAMSUNG-SGH-I547 using xda app-developers app
champ1919 said:
Check out this old thread. I doubt Adam will still do the mod for that price, but, I'm sure he will point you in right direction.
http://forum.xda-developers.com/showthread.php?p=19651020
Edit: Try the method to put a vibrant into download mode. I've forgotten that combination
Sent from my SAMSUNG-SGH-I547 using xda app-developers app
Click to expand...
Click to collapse
I can't contact him, could you tell me if I replace the board the phone will fix?
I think that wil be a better way to my because I can do it myself just buying the board on ebay.
Buy or make you a jig.
http://forum.xda-developers.com/showthread.php?p=8822843
If a jig doesn't get you into download mode, jtag services maybe the only way.
champ1919 said:
Buy or make you a jig.
http://forum.xda-developers.com/showthread.php?p=8822843
If a jig doesn't get you into download mode, jtag services maybe the only way.
Click to expand...
Click to collapse
I going to try this http://forum.xda-developers.com/showthread.php?t=1333424, else replace the board because the jtag is too difficult in this country

mi infuse donĀ“t flash in donwload mode

my sansung infuse this by yourselves where I can not install versions of stock and need to reset lost and lost everything and even root or leaves samsung logo when you turn it all happened last night when trying to delete a rom to install another THROUGH enter advanced options and delete a thread or something that was not to be and I got out of the recovery now I can not access or install the versines the stock and need urgent help as the phone does not utiliz me if nothing urgent need persna and excuse the discomfort and urgency but desepero that no longer do I have so I would greatly appreciate the help:crying::crying::crying::crying::crying::crying::crying:
Try flashing with heimdall. my infuse wont flash with Odin ever. Heimdall always works for me.
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
alexander3109 said:
my sansung infuse this by yourselves where I can not install versions of stock and need to reset lost and lost everything and even root or leaves samsung logo when you turn it all happened last night when trying to delete a rom to install another THROUGH enter advanced options and delete a thread or something that was not to be and I got out of the recovery now I can not access or install the versines the stock and need urgent help as the phone does not utiliz me if nothing urgent need persna and excuse the discomfort and urgency but desepero that no longer do I have so I would greatly appreciate the help:crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Turn off the anti-virus of your computer and try again.
Sent from my SGH-I997 using XDA Premium 4 mobile app
try this
alexischino said:
Turn off the anti-virus of your computer and try again.
Sent from my SGH-I997 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
you have to run odin as administrator to get your flash done. right click on odin executable file, choose run as administrator and youre done.
then choose the files you wanna flash and and click start
Androidrick said:
you have to run odin as administrator to get your flash done. right click on odin executable file, choose run as administrator and youre done.
then choose the files you wanna flash and and click start
Click to expand...
Click to collapse
I appreciate that you are trying to help others but actually I'm not the one having problems with my phone
Sent from my SGH-I997 using XDA Premium 4 mobile app
ifarmen effects
alexischino said:
I appreciate that you are trying to help others but actually I'm not the one having problems with my phone
Sent from my SGH-I997 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I prefer ODIN, but if it's not working for you do as magnetboard said, try a Heimdall all in one.
capeman316 said:
I prefer ODIN, but if it's not working for you do as magnetboard said, try a Heimdall all in one.
Click to expand...
Click to collapse
ehhhhh lol why you guys quote me if you know how to read I'm not having any problems with my phone I'm not a noob here i don't write this topic i only make a suggestion here so don't quote me or suggest me how to fix my device because in case i do something wrong and i brick my phone i know how to fix it.
Sent from my SGH-I997 using XDA Premium 4 mobile app

Categories

Resources