Database Info

Case-mate tough case

Hi all i would just like to share my experience with this case..Last week i had the unfortunate accident of dropping my Samsung galaxy s phone in the toilet at home...
The phone fell out of my pocket and straight in too the pan and finally landed in the u-bend.
The phone was in total water submersion for not more that 3-5 seconds..my heart fell to the floor...
I quickly grabbed the phone from the toilet..turned phone off and removed the battery..water was all inside the phone.
I shook the phone and lots of water came out..my thoughts at this time was phone was well and truly buggered.
I proceeded to dry the phone on my radiator at home..sim-card,sd-card,battery and back plate all removed to aide drying.
Left the phone to dry for a full 24 hrs...before attempting to turn phone back on.
There was condensation inside the phone which all dispersed after 24 hrs. of drying out the phone.
And the big moment arrived of putting the phone back together to see if it would ever work again....
My heart was pounding at this time hoping and willing the phone back to life..pressed the power on button and the phone came to life.
Apart from having to do a reset on the phone and re-installing all my apps there has been no problem with the phone working 100%.
Phone has been working for well over a week now with no problems.
How lucky was I??...Im not saying that the Casemate Toughcase is the be all and end all in cases but im sure it went some way in helping reduce the damage that would have been caused by water ingress in to the phone.
happy case hunting...

Ewwww That Dirty Samsung Galaxy S

Lol..must add the water in toilet was clean...

The tough case was not the parameter influencing the luck in this case. As long as the rear speaker hole is not sealed, the water will always have a way inside the phone, no matter how many shock protection layers you have o the phone.
And generally speaking, tap water is not dangerous for the electrical parts of low voltage powered devices (like watches, phones and so on). The main issue with phones dropped in water is that the water will infiltrate in the optical dispersers of the LCD screen and on the screen connectors, generating blurry pictures or no picture at all.
I've learned something from your experience ... the water will not go in between the OLED screen and the digitizer .. which is a GOOD thing.

Great! I'm glad your SGS survived!
just take more care of it, ok? and don't drop it on Sea Water!

any waterproof supplies for galaxy s?

alex.bacer said:
any waterproof supplies for galaxy s?
Click to expand...
Click to collapse
Zip-lock bag?

I've almost fell from my seat reading the end of your story. I am glad to read that everything went Ok. But does the phone smell .... hmmm different?

Truly lucky.
Sent from my GT-I9000 using XDA App

There are better ways to change the colour of the phone

Update phone still working a OK two and a bit weeks on...

I have toughcase as well. Not the prettiest case, the phone loses it's "luxury" feeling, but you can certainly throw around the phone no problem.

I dropped my Galaxy S (with Tough Case) today, it fell directly on my hard tiles floor at a height around 70cm. I was really freaked out! I picked it up and it was still there like nothing happened (no crash, no slow, no reboot, no nothing) really happy that I chose this case!

thanksss a lot for content

After a little more than one week, the bezel lost a lot of its rotation resistance

After owning the Gear S2 Classic for a little over a week, I noticed yesterday that the bezel is now a lot easier to rotate then it used to. I am concerned that something is wrong or wearing out prematurely. I kinda liked the amount of resistance it had before. It is still functioning but the rotation clicks are less noticeable and it takes almost not effort to rotate the bezel, making it feel cheap compared to how it was initially. I am still under the 15 days return policies at Best Buy. I was wondering if anyone has noticed this kind of changes over time? For example I think I needed to grasp with two fingers to rotate before and now I can do it with just one.

I have the opposite problem. After owning the Gear S2 3G for several months, the bezel gets sticky after turning it a few times, like I'm tightening a screw. If I continue turning the bezel or reverse the direction, it becomes loose again. I put a few drops of 3-in-1 oil in the gap between the bezel and the watch, and it helped the problem. However, after a week it started feeling sticky again.

Dont you make it worser by putting oil in there? Dust can get everywhere. Dust and oil isnt really a good mixture.

Oxizee said:
Dont you make it worser by putting oil in there? Dust can get everywhere. Dust and oil isnt really a good mixture.
Click to expand...
Click to collapse
Not really. 3-in-1 oil is made to lubricate moving parts and clean tools/guns. The bezel turns nicely after applying a few drops of 3-in-1 oil, but it doesn't stay that way for more than a few weeks.
Another poster pointed out the Gear S2 is water resistant to level IP68. I tried cleaning it with warm water and some dish washing liquid, but I got the same result as using the 3-in-1 oil. I guess I just need to clean the watch every few weeks.

Zagzagel said:
Not really. 3-in-1 oil is made to lubricate moving parts and clean tools/guns. The bezel turns nicely after applying a few drops of 3-in-1 oil, but it doesn't stay that way for more than a few weeks.
Another poster pointed out the Gear S2 is water resistant to level IP68. I tried cleaning it with warm water and some dish washing liquid, but I got the same result as using the 3-in-1 oil. I guess I just need to clean the watch every few weeks.
Click to expand...
Click to collapse
That was me
Given that we don't know anything about the materials or construction of the seals, I wouldn't put anything other than water -- which the watch it expressly designed to tolerate. 3-in-1 is great for lubricating metal bearings like door hinges; I wouldn't introduce it (or any other lubricant/solvent) into a mechanism sealed against water intrusion, where there will be rubber/silicone parts that might not tolerate the oil.

dwallersv said:
That was me
Given that we don't know anything about the materials or construction of the seals, I wouldn't put anything other than water -- which the watch it expressly designed to tolerate. 3-in-1 is great for lubricating metal bearings like door hinges; I wouldn't introduce it (or any other lubricant/solvent) into a mechanism sealed against water intrusion, where there will be rubber/silicone parts that might not tolerate the oil.
Click to expand...
Click to collapse
Good point. If the waterproof seals are made of rubber or plastic, a silicone oil should be used instead of petroleum. However, I'm just going to follow your advice and use soap and water when it gets sticky.

Zagzagel said:
Good point. If the waterproof seals are made of rubber or plastic, a silicone oil should be used instead of petroleum. However, I'm just going to follow your advice and use soap and water when it gets sticky.
Click to expand...
Click to collapse
I wouldn't even use any soap either unless necessary. While soap is far less risky than an oil, if water will do the trick alone that's the best answer.
Incrementalism, my friend Use a little soap only if necessary...

My water damaged Gear S2 update

I posted a little bit ago about my Gear S2 getting splashed at a pool party and it turning off and wouldn't turn on. I waited a day having it in a bag of rice before turning it on even though it was supposed to be water resistant. Turned it on and the screen flicked non stop. I periodically turned it on seeing if anything changed and it didn't.
Finally I contacted Samsung and they told me in a professional way to "go screw yourself". That just because they say it can withstand getting wet, doesn't mean they stand by it.
So I decided to take it apart. I didn't want to before because I've never taken apart a water proof smart watch before and didn't know if it would void the warranty (lol) or if it was glued shut to be water tight. Well honestly I don't see how it's supposed to keep water out with the way it is put together. But I quickly found the damage was on the LCD connector. It had a white crust like substance. So I cleaned it off with 99% isopropyl alcohol and a soft toothbrush and it works perfectly.
Needless to say my watch is avoiding water all together.

Wash dishes with mine, seems to work

Yeah I figured I would be able to do the same. I mean I take my S7 Edge into the pool and record video underwater all the time.

Back off my hols was tempted to try the s2 gear and S7 edge on the beach and pool - but didn't feel confident that it would work
Sent from my SM-G935F using XDA-Developers mobile app

I swam with mine for prolonged time in an Olympic sized pool... Worked like a charm... Guess that the quality of the watch differs from one person to another... Good job on fixing yours!
Sent from my iPhone using Tapatalk

Though everyone can do what they want, I've made quite the effort keeping mine away from water, as I learned with my Neo it didn't like water too well.

I've used my Gear S2 inside the water for prolonged times with no problem. At the beach and at the pool. The first time I did it by mistake but it survived.
Sent from my SAMSUNG-SM-N920A using Tapatalk

It can survive beer too, I tried it today [emoji3] It was an accident of course and got literally soaked, but it's perfectly fine.
Sent using Tapatalk

Got mine wet, now a day later the speaker sounds tiny and crackles almost has no volume to it.. Its getting better though the more I play music through it

As with others, I've had expected water-resistant results with mine as well (Verizon 3G classic). Shower with it, clean it under running water, gets wet in all sorts of other activities (washing the car, dishes, etc.). No issues.
Sounds like you simply got a bad one -- something that is inevitable, as there simply is no manufacturing process that yields zero defects, ever.
What is really, really disturbing is the response from Samsung.

water resistance experience

Tell your tale!!
I personally wouldn't dare to do it. Knowing my luck, I'll probably have a faulty device lolol

Took the s8+ to the pool several times over the week. Was fine. Just need to wait for charging port to dry; but the s8 gives warning sign if you plug your phone with a wet port. No worries at all.

Washed mine under the tap , delicate flow, after eating greasy food.

Haven't dared since the day my Sony Xperia Z3 went in the bath with its IP68 rating and I was greeted with bubbles as the phone filled up!
I got a replacement but still, twitchy bum time

Had a bucket of water poured on mine by a young family member. It was in an otterbox defender and didn't have any issues at all.

I always take my S8+ with me, also under water.
I don't know why, but I feel much safer than with my old S7 edge.
Charging... I always user wireless charge at work and in my car, so my S8 is always full at home and I never need an cable .

jackdown said:
I always take my S8+ with me, also under water.
I don't know why, but I feel much safer than with my old S7 edge.
Charging... I always user wireless charge at work and in my car, so my S8 is always full at home and I never need an cable .
Click to expand...
Click to collapse
Is that in fresh water? Or salt water? I've heard salt water is no good to any of the water resistant devices. I just ordered my device so I'm doing some preliminary learning

jmckeejr said:
Is that in fresh water? Or salt water? I've heard salt water is no good to any of the water resistant devices. I just ordered my device so I'm doing some preliminary learning
Click to expand...
Click to collapse
It would have to be freshwater purely based off the fact tadpoles cannot survive in saltwater. Chlorinated or salt water can attack and erode the rubber gaskets and seals that protect your device from water. Overtime these could weaken, leaving your phone exposed to damage from moisture, not to mention salt water is a good conductor of electricity.
Here in Australia a screen replacement for this device is $700AUD so I've just got mine in a Lifeproof case regardless of any IP ratings.
Just in case anyone is wondering like I was, I cannot recommend the Lifeproof FRE for Galaxy S8 as there's such a big gap between the front plastic screen cover and the actual LCD itself. I basically have to hammer the screen to type and it makes these "clacking noises" as the screen comes in contact with the plastic.

ScoOby-Do0 said:
It would have to be freshwater purely based off the fact tadpoles cannot survive in saltwater. Chlorinated or salt water can attack and erode the rubber gaskets and seals that protect your device from water. Overtime these could weaken, leaving your phone exposed to damage from moisture, not to mention salt water is a good conductor of electricity.
Here in Australia a screen replacement for this device is $700AUD so I've just got mine in a Lifeproof case regardless of any IP ratings.
Just in case anyone is wondering like I was, I cannot recommend the Lifeproof FRE for Galaxy S8 as there's such a big gap between the front plastic screen cover and the actual LCD itself. I basically have to hammer the screen to type and it makes these "clacking noises" as the screen comes in contact with the plastic.
Click to expand...
Click to collapse
Since you're in Australia... Take the case to the place of purchase and ask for a full refund. According to Consumer Affairs, if a product does not work as advertised you're entitled for a replacement or a refund.
Lifeproof cases are very expensive (over $AU100). You expect them to be perfect at that price!

Well I had my first experience
Spilt warm coffee on my phone.
Ran to the hotel sink and washed off the phone.
Blow dried it to get rid of the moisture in the speaker grill and charging port. Good as new!!

Cheap waterproof case...

Last week I decided to take an image under water (fresh). Put her in at least three different times. Got a notification saying there was water detected in the charging port and to make sure it is dry before using. Today, my s8 is still working like new. Here's the image I got (unedited)!

Anyone get their Pixel 2 wet often ?

Now that the Pixel 2 is water resistant, does anyone get their phone wet or in water often ? I recently took mine hiking which was perfect for the camera, and after the trip it was dusty and oily from use. I took the phone and turned it off and submerged it in warm water and washed it for a few minutes and let it dry. Now it is clean and good to go no problems. I generally don't get my phone wet often, but I'll probably start washing it after trips like these.

Just be careful you don't make the water too warm, and absolutely don't use soap. This sort of waterproofing takes advantage of surface tension, and either of those two things can defeat it and let water seep in.

mikeprius said:
Now that the Pixel 2 is water resistant, does anyone get their phone wet or in water often ? I recently took mine hiking which was perfect for the camera, and after the trip it was dusty and oily from use. I took the phone and turned it off and submerged it in warm water and washed it for a few minutes and let it dry. Now it is clean and good to go no problems. I generally don't get my phone wet often, but I'll probably start washing it after trips like these.
Click to expand...
Click to collapse
I only have one thing to say. You're either braver or crazier than i am. I haven't yet figured out which one it is though.

Just when I turn it on ? But seriously, I feel like I can help you out here. Since I'm an auto detailer for a living I can tell you that water does not clean oil at all. And it's highly unadvisable to get your pixel that wet on purpose. I recommend a high quality microfiber towel and a spritz or two of rinceless wash on the towel. I use Carpro EcH2O but any rinceless wash will do. Nice thing about Carpro EcH2O is that there is ceramic coating properties within it so you're adding a bit of ceramic protection to the screen and enclosure of the phone. This not only adds a protective barrier but also keeps it cleaner and easier to clean in the even it does get dirty. That product must be diluted and will last you a lifetime and you can use it on your car as well. But in a pinch I would use Isopropanol Alcohol on a microfiber and that will do just as good of a job cleaning it up without getting the phone wet. Hope this helps you.

I saw a YouTube video of a guy who took his pixel 2 into the pool and even though it survived, the speaker output was drastically reduced, even after it dried. I wouldn't intentionally submerge any device. The water proofing is for emergency only.

I wash my Pixel 2 phone occasionally. I had an S7 Edge that I washed all the time and used for underwater photography. I've only submerged my Pixel 2 for photos once or twice, and so far so good.
One warning though, your USB cable isn't waterproof. I toasted a couple USB cords with a wet USB port before I realized what was going on. Consider covering up the USB port when you're getting your phone wet, and make sure it's dry before you charge it.
Almost every time both phones got submerged, the speaker was weird for a few hours. Once it dried out it was fine.
But you know, YMMV.
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
Oh also, remember that fast moving water can push it's way into the waterproofing a lot faster than water pressure alone. I always try to avoid water coming straight out of the faucet into a hole or seam.