Hello guys Im at begin with this app...so it took me a while to figure out how to make an emulator using arm eabi v7 and now when I start the emulator its loading the screen but I cant use my app . I dont even see the icon and in log box is writed
"emulator: WARNING: Classic qemu does not support SMP. The hw.cpu.ncore option from your config file is ignored."
Do you have any idea what should I do?
ty for your time.
Use other emulator like Genymotion.
Related
Hey everyone,
I've been trying to connect my wiimote in debian. Im new to linux, im kinda putting all the pieces together as i go. wminput and all its corresponding packages seemed to install just fine with 'apt-get install wminput'.
But when I run wminput I get the error "unable to open uinput"
so googled, and managed to find uinput.ko and some general instructions on installing it.
I loaded it into /lib/modules/2.6.29.6-cm41/ and ran 'insmod uinput.ko' and i get the error 'Invalid module format' which im assuming is because it was compiled for an x86 system. modprobe displays a similar error.
I also dont understand the "cm41" in the path /lib/modules/2.6.29.6-cm41/, is that short for CyanogenMod, am I placing this module in my android Filesystem?
Are there any linux guru's around that could compile uinput.c for the g1 debian build? Or simply tell me that im way off track and there are bigger problems involved with getting this to work.
Also, if wminput did function. Does anyone know if it would send button presses to android while running in the background?
uinput.c
http://abstrakraft.org/cwiid/browser/trunk/wminput/uinput.c?format=txt
wminput
http://packages.debian.org/lenny/wminput
wmgui which i believe uses the same library as wminput has been made to work through ssh
http://www.lukedupin.com/projects/show?project=g1_wii -
There is also WMD for connecting to wiimotes but it requires uinput as well (i think).
http://www.circuitdb.com/articles/7/3 -
Ive been reading http://www.saurik.com/id/10 and it seems that this modules really needs to be installed to Android? And then I will be able to access this module from debian which is running on top on android? Can anyone confirm that?
I extracted the config file from my phone at /proc/config.gz and it has the line # CONFIG_INPUT_UINPUT is not set. some googling brings me here http://lxr.linux.no/#linux+v2.6.31/drivers/input/misc/Kconfig
206 config INPUT_UINPUT
207 tristate "User level driver support"
208 help
209 Say Y here if you want to support user level drivers for input
210 subsystem accessible under char device 10:223 - /dev/input/uinput.
211
212 To compile this driver as a module, choose M here: the
213 module will be called uinput.
This all leads me to believe that this module will work on the G1. Will Any Devs PLEASE compile this for me. If you think it would work properly that is.
I just dont have the skills to compile it myself yet. Ive been reading alot on how to compile the kernel and kernel modules for the G1, I setup Ubuntu, and setup my environment and installed the android source code. I was working off this link http://andblogs.net/2008/12/compiling-your-own-g1-kernel-modules/ but i dont understand how i get the kernel source . I have sooo much reading todo before I get all this. Any recommended links?
Hi Everyone,
I have few questions regarding Android.
Currently, I don't have an Android and I consider getting one.
Kindly, please answer my following questions [Related to hacking]:
1- Does Android Support Chroot-ing? (Assuming it is been rooted)
2- If it does, is it possible to start/run Xorg/Xserver (Natively)?
3- If Chroot-ing is not possible nor starting an X-server. How easy to dual boot Debian/Fedora/Etc ... in Android phones?
I'm considering to buy Android to chroot or booting a linux in it (ARM Type).
I have already wasted a lots of time trying get my an answer for my questions, the only thing I found is about using VNC on android, but nothing about X11 Forwarding.
If you don't recommend doing any of the above, could you tell me why not [RAM/Technical reason]?
Thanks in advance | You will get thanks after answering me
I guess, I shouldn't scratch "Thanks in advance". Otherwise I might had a better luck.
Hi, may be is too late, i find your post searching info on chrooting.
It's possible installing busybox and like you may had find : on nexus ubuntu can be used.
You can use it from terminal or from vnc so you will have X.
I installed busybox but the bootubuntu script don't find chroot, i installed it from GOT's OpenRecovery (first option)
Xorg does run, I tested it, but the screen becomes garbled, because of Android and Xorg tries to write to screen simultaneously.. I'm trying to find a solution for that lately.
@theGanymedes you run xorg without vnc ? you havn't display error ?
screenshot ?
thanks
New X server written as app for Android
Somebody has written an xserver for android:
my20percent.wordpress.com/2012/02/27/android-x-server/
It is open source:
code.google.com/p/android-xserver/
And is on the market (search for 'x server').
Needs some work but could be the answer to running all gui apps from a chroot inside android!
Hello
I recently bought a vivo tabe rt and I have installed x86 emulator. my question is when I tried and install software I need for work which is basically a program for parts identifying with pictures I load the program under the emulator and it started to run it then says acrobat reader 4 is needed and that it will start to install it extracts the acrobat software files and at end says c:\users\my name\appdata\local\temp\pftb261mtmp\setup.exe is a 16 bit application. you do not have permission to execute 16 bit applications. it then goes into main software install starts to extract and tells me the ole system files are in use and cannot be updated must restart. im wondering if this is do to the emulator not working with this software or if its something I can change.
wooddog395 said:
Hello
I recently bought a vivo tabe rt and I have installed x86 emulator. my question is when I tried and install software I need for work which is basically a program for parts identifying with pictures I load the program under the emulator and it started to run it then says acrobat reader 4 is needed and that it will start to install it extracts the acrobat software files and at end says c:\users\my name\appdata\local\temp\pftb261mtmp\setup.exe is a 16 bit application. you do not have permission to execute 16 bit applications. it then goes into main software install starts to extract and tells me the ole system files are in use and cannot be updated must restart. im wondering if this is do to the emulator not working with this software or if its something I can change.
Click to expand...
Click to collapse
From what I can see, the installer you are using is not supported by the emulator, or you are using the version of the emulator that does not support launching other applications
Nanaya Caasi said:
From what I can see, the installer you are using is not supported by the emulator, or you are using the version of the emulator that does not support launching other applications
Click to expand...
Click to collapse
I am using the newest version of the emulator.
Trying to build my own AOSP ROM and I keep getting stuck on emulator unable to find the kernel version, though the file is there.
I am using Hyper-V VM with Ubuntu V20 installed and the VHD is exactly that, a .vhd file extension for the virtual hard drive.
I just can not seem to resolve the problem on the missing kernel, also have supplied a pic showing exactly what it says after the build is finished and then I try and run emulator.
Any help or info, links on the matter would be much appreciated and thank you for taking the time to help out.
I have also noticed I can not use "emulator -list-avds" nothing happens. Just exits and terminal is ready for user input again.
So far I did a repo sync again and then a m -checkbuild and just waiting for it to finish to try emulator again
Update: Decided to start from scratch
Changes that I have made.
Using Ubuntu 18.04 for O.S
Switched from M.S Hyper-V to Oracle Virtual-Box (V.B has more features then Hyper-V and is better in performance because of it.).
Virtual HDD is set to .VHD but is on Sata and not IDE now (Virtual-Box only allows it).
Made the VHD a fixed drive instead of dynamic for better performance (Max size of 512GB)
Dedicated 32GB of ram to VM.
Allowed up to 6 cores on a 12 core processor.
might experiment getting Oracle JDK installed instead of using openjdk, due to having issues with it.
UPDATE_1
Fresh build on 18.04 same issues as old build. emulator, avd and android. all not working.
I might have missed a package to download or something or maybe java still is not working. Using openjdk 11 at the moment. I am running out of ideas as to why i can not get it working.
Update_2
Looks like the reason emulator is not working is due to me not installing SDK, I am not using the IDE so I think I need the command-line & Platform tools installed. got to work out how to install it now.
UPDATE_3
SDK from what I know is installed. Now I am getting an output file is missing, but build completed with no issues. Please help, new image also supplied.
as you know LDPlayer, Bluestacks, Nox, etc.. has a customized image. I want to use this images in headless mode (No Graphic) and automate using ADB connection.
so its a question for me how can I do this ?
can I use their virtual box backup in headless mode on my Linux server ?
or can I extract their image and use AVD emulator ?
I searched a lot but I didn't get answer. I need a kind expert person to help me.