hello .i tried to port a rom from another device but i hard bricked my device.
Device not boot and blank screen.Please advice
thanks
andreasneohq said:
hello .i tried to port a rom from another device but i hard bricked my device.
Device not boot and blank screen.Please advice
thanks
Click to expand...
Click to collapse
Cannot access recovery pls help
andreasneohq said:
Cannot access recovery pls help
Click to expand...
Click to collapse
Can you accsess fastboot and if yes flash recovery again
no fastboot any solution
andreasneohq said:
no fastboot any solution
Click to expand...
Click to collapse
Chances are slim then. Try holding power button for about 10 seconds to make it turn off, then press power+volume down and hold it for a few seconds. Also try power+volume up button combo, I don't know if it would open something or not but you can try.
Broadcasted from Zeta Reticuli
Unfortunately on this device, if you can't get to the bootloader and access fastboot, you are pretty much screwed. There is no download or emergency recovery mode I am aware of, so if you overwrote the bootloader you probably need to send it to Moto for reflashing/replacement or send it to a JTAG programming service.
please
acejavelin said:
Unfortunately on this device, if you can't get to the bootloader and access fastboot, you are pretty much screwed. There is no download or emergency recovery mode I am aware of, so if you overwrote the bootloader you probably need to send it to Moto for reflashing/replacement or send it to a JTAG programming service.
Click to expand...
Click to collapse
i fiind a program to flash but i need rawprogram and patch can u please help ?
andreasneohq said:
i fiind a program to flash but i need rawprogram and patch can u please help ?
Click to expand...
Click to collapse
I'm not sure what your asking for... Never heard of raw program for this device, the only thing available is the fastboot images for each partition.
Can you provide a link to the software your talking about?
Sent from my Motorola XT1575 using XDA Labs
please
acejavelin said:
Unfortunately on this device, if you can't get to the bootloader and access fastboot, you are pretty much screwed. There is no download or emergency recovery mode I am aware of, so if you overwrote the bootloader you probably need to send it to Moto for reflashing/replacement or send it to a JTAG programming service.
Click to expand...
Click to collapse
i fiind a program to flash but i need rawprogram and patch can u please help ?
QPST IS the name of program
andreasneohq said:
i fiind a program to flash but i need rawprogram and patch can u please help ?
QPST IS the name of program
Click to expand...
Click to collapse
Ahhh... OK. To my knowledge there are no directly compatible images for QPST for the Moto G 3rd gen.
On the good side, according to this article, QPST flashes seem to use dd images of partitions, and the factory images available from Moto contain those img files!
If you find a flashable file for XXX device that works with QPST and compare it with the Moto factory images, you may be able to find a working solution... or at least enough to get the bootloader working. If you can get the bootloader to load, you can fastboot flash the rest of it.
EDIT: BTW, if I can be of assistance, let me know. I have a working, stock XT1540 with an unlocked bootloader that is not a daily driver phone, so I can play with it (although I would REALLY like to not brick it). Also, if you can come up with an unbrick for this device and share it here, I am sure your 9 posts and 1 thanks would jump significantly and quite quickly.
Related
Nothing new about , MBM 5.0 ? , Image Factory ? sorry one more topic
ST4NL3//Y said:
Nothing new about , MBM 5.0 ? , Image Factory ? sorry one more topic
Click to expand...
Click to collapse
till now is no news about that, how? when? where? what? i dont know
ST4NL3//Y said:
Nothing new about , MBM 5.0 ? , Image Factory ? sorry one more topic
Click to expand...
Click to collapse
i'm waiting too :crying:
maybe other solution?(
can someone smart can help us?
Can pay someone?
MadL1fe said:
i'm waiting too :crying:
maybe other solution?(
can someone smart can help us?
Can pay someone?
Click to expand...
Click to collapse
bring your phone to services center, your problem will solved but you must pay it
I already tried everything, but it looks like we will have to wait even. there is no any news about a tool I'm sad without my moto G
Sandivisi said:
bring your phone to services center, your problem will solved but you must pay it
Click to expand...
Click to collapse
in my country no motorola service centers
many of us have lost the guarantee of motorola
ST4NL3//Y said:
many of us have lost the guarantee of motorola
Click to expand...
Click to collapse
I will pay what I can, if someone will help restore .Here is a lot of clever people ... that no one can help?
You say hardbricked, you mean the phone doesnt boot right?
If you connect to pc, installs an driver named HSusb for qualcomm s1 emergency boot?
Normal it must do that.If not, press vol keys and put usb in.
Normaly you cant brick qualcomm emergency mode. If you get this driver installed, write me a pn. i can flash it back to normal recovery.
konsolen said:
You say hardbricked, you mean the phone doesnt boot right?
If you connect to pc, installs an driver named HSusb for qualcomm s1 emergency boot?
Normal it must do that.If not, press vol keys and put usb in.
Normaly you cant brick qualcomm emergency mode. If you get this driver installed, write me a pn. i can flash it back to normal recovery.
Click to expand...
Click to collapse
no man, the phone doesnt boot into fastboot
and we need blankflash/mbm-ci for new bootloader lollipop to make it work
correct need of blankflash compatible with 5.0
i dont need fastboot.
i upload with a serial line in raw format.
konsolen said:
i dont need fastboot.
i upload with a serial line in raw format.
Click to expand...
Click to collapse
how?
my phone dead after downgrade to 4.4.3 then upgrade to 4.4.4 from android 5.0
Sandivisi said:
how?
my phone dead after downgrade to 4.4.3 then upgrade to 4.4.4 from android 5.0
Click to expand...
Click to collapse
me was exactly the same
Then go to the store.
i will give you my help and you want inform me about updates.
i read that, but you shredder your masterboot register in nandflash.
there is no android. this is the lowest level of a device. name it layer 0.
you crashed the register where the cpu looks what he must do, to start the first sequence.
konsolen said:
You say hardbricked, you mean the phone doesnt boot right?
If you connect to pc, installs an driver named HSusb for qualcomm s1 emergency boot?
Normal it must do that.If not, press vol keys and put usb in.
Normaly you cant brick qualcomm emergency mode. If you get this driver installed, write me a pn. i can flash it back to normal recovery.
Click to expand...
Click to collapse
come on, help us
---------- Post added at 10:54 PM ---------- Previous post was at 10:47 PM ----------
konsolen said:
Then go to the store.
i will give you my help and you want inform me about updates.
i read that, but you shredder your masterboot register in nandflash.
there is no android. this is the lowest level of a device. name it layer 0.
you crashed the register where the cpu looks what he must do, to start the first sequence.
Click to expand...
Click to collapse
i dont understand what you mean, so what should I do
ok.the qualcomm driver is installed right?
then load the teamviewer.exe app.
i look for the right snapdragon 400 mbr and connect then to your pc.
konsolen said:
ok.the qualcomm driver is installed right?
then load the teamviewer.exe app.
i look for the right snapdragon 400 mbr and connect then to your pc.
Click to expand...
Click to collapse
yes, it already installed
and for what teamviewer?
i must connect to flash.
same problem with me .I flashed stock rom to downgrade to 4.4.3 from rooted stock lollipop OS because of messing up build.prop file.After that,I have installed OTA update to 4.4.4,then the problem starts no bootloader,no boot,no fastboot,no adb,no recovery and except qhsusb_bulk when connected to PC.After 2 days ,its now showing sometimes as usb input device ,with LED light blinking.Not sure if there is solutuion for this.pls help if anyone found the solution
Hi everyone.
I had a hard bricked n5. I have not download mode,no fastboot, no recovery QHSUSB_BULK mode or Qualcomm 9008 device in Device Manager on PC.
Dead phone... I tried to repair my n5 with it (http://forum.xda-developers.com/showthread.php?t=2582142), but nothing.
I read, that someone repair his phone with bootsdcard. And i want to try this method, but i don't know what image i should install for unbrick my nexus. Can anyone give me a backuped boot.img from your LIVING device?
Sorry for my English.
Vanesso said:
Hi everyone.
I had a hard bricked n5. I have not download mode,no fastboot, no recovery QHSUSB_BULK mode or Qualcomm 9008 device in Device Manager on PC.
Dead phone... I tried to repair my n5 with it (http://forum.xda-developers.com/showthread.php?t=2582142), but nothing.
I read, that someone repair his phone with bootsdcard. And i want to try this method, but i don't know what image i should install for unbrick my nexus. Can anyone give me a backuped boot.img from your LIVING device?
Sorry for my English.
Click to expand...
Click to collapse
First of all, that link is for the LG G2, and the partitions might not even be the same.
If it doesn't show any sort of device at all, or 9008, then your device is beyond saving except by LG/other professionals, who could repair it but won't bother and will just do a motherboard swap instead.
Questions also belong in the Q&A section, not the General section.
If you flashed the wrong partitions you might be in luck. Does the phone show on the computer?
psycho693 said:
If you flashed the wrong partitions you might be in luck. Does the phone show on the computer?
Click to expand...
Click to collapse
Yes, i downloaded my partitions, but i can't see my phone on linux...
Can anyone give me a boot.img(or other images for create bootsdcard) from WORKING device for repair my phone? May be it is one way to repair my nexus.
and what you will do with that "bootsdcard" when phone is not detected & there's no card slot?
Vanesso said:
Can anyone give me a boot.img(or other images for create bootsdcard) from WORKING device for repair my phone? May be it is one way to repair my nexus.
Click to expand...
Click to collapse
I honestly think you're wasting your time but if you need the stock boot.img just download the factory image and pull it from there.
https://developers.google.com/android/nexus/images
Hi, I'm having a brick issue with my moto g100, OEM is locked so I can't flash/boot anything. My only hope of getting it back is booting into EDL and blankflashing the device... problem is, I can't find a way to do so. Does anybody here know how to enter EDL mode with this phone? I've tried several button combinations, EDL cable, but nothing works. The only thing I've left to try is shortening the mobo pins, but I don't know which ones, let alone if the board even has them.
Any help would be appreciated. Thanks!
lucasdb94 said:
Hi, I'm having a brick issue with my moto g100, OEM is locked so I can't flash/boot anything. My only hope of getting it back is booting into EDL and blankflashing the device... problem is, I can't find a way to do so. Does anybody here know how to enter EDL mode with this phone? I've tried several button combinations, EDL cable, but nothing works. The only thing I've left to try is shortening the mobo pins, but I don't know which ones, let alone if the board even has them.
Any help would be appreciated. Thanks!
Click to expand...
Click to collapse
I have a super easy solution. Go to the Google app store. And download the premium bugjaeger app on a different Android device so basically you're using another Android device to run fastboot commands just remember with Android 11 make sure you give both devices debugging access
lucasdb94 said:
Hi, I'm having a brick issue with my moto g100, OEM is locked so I can't flash/boot anything. My only hope of getting it back is booting into EDL and blankflashing the device... problem is, I can't find a way to do so. Does anybody here know how to enter EDL mode with this phone? I've tried several button combinations, EDL cable, but nothing works. The only thing I've left to try is shortening the mobo pins, but I don't know which ones, let alone if the board even has them.
Any help would be appreciated. Thanks!
Click to expand...
Click to collapse
If you can access fastboot.. try "fastboot reboot emergency"
I know this is prob too late for a suggestion, however have you tried chimera tool to bypass the edl lock? You don't have to pay for that part of the tool
Shortstuff81 said:
I know this is prob too late for a suggestion, however have you tried chimera tool to bypass the edl lock? You don't have to pay for that part of the tool
Click to expand...
Click to collapse
Thanks for suggestion.. It is not too late. Have not tried that tool, so i will do a test when i have the chance to do that. Phone is still bricked.
What Name said:
Thanks for suggestion.. It is not too late. Have not tried that tool, so i will do a test when i have the chance to do that. Phone is still bricked.
Click to expand...
Click to collapse
I'm still trying to unbrick mine as well lol so I'll keep you posted and please try to keep me posted as well.... I haven't tried my own suggestion as of yet due to my PC dying on me.... I'll have a loaner so I'll be trying it then
Shortstuff81 said:
I'm still trying to unbrick mine as well lol so I'll keep you posted and please try to keep me posted as well.... I haven't tried my own suggestion as of yet due to my PC dying on me.... I'll have a loaner so I'll be trying it then
Click to expand...
Click to collapse
Did you get phone unbricked ?
If not, use method in this tread. It saved mine..
Phone wouldn't boot into the system after bootloader locking back...
I wanted to help someone whose phone wouldn't boot into the system after bootloader locking back, phone hangs on a red warning. And in the process of experimenting myself got confused and got into the same situation. Unlocking the bootloader...
forum.xda-developers.com
Hello to all,
I apologize in advance for this message.
I mistakenly bricked my phone,
It was running WW-18.0840.2201.226 (Android 11).
I'm not sure if I'm going to be able to use it again, but I'm sure I'll be able to use it again in the future.
The recovery mode does not work anymore. It remains stuck on the logo.
Concerning the device manager :
In Bootloader, nothing is detected
When I test the recovery mode, it detects 'Android Composite ADB interface'.
However, the ADB commands do not work (Unauthaurized)
This is a call for help, I don't know which tutorial to look at to help me.
Do I need to get a Deep Flash Cable to restore the phone?
Excuse my English, I'm French ^^'
Hi, I'm not sure, but I think you will have to delete this POST... It doesn't respect the forum rules... That said, you can follow this link for your problem. https://forum.xda-developers.com/t/...to-unlock-bootloader-to-modify-country-cn-to- ww.4353865/não lido
Hi Rico,
If I have to delete the post I will do it, it's not a problem.
Do you think I can put this post in the topic you gave me?
I had come across it in my research but I didn't know if it needed a Deep Flash Cable
I didn't know that my problem was similar to the one in the post because I don't have a 9008 mode
B.
Balmyr said:
Hi Rico,
If I have to delete the post I will do it, it's not a problem.
Do you think I can put this post in the topic you gave me?
I had come across it in my research but I didn't know if it needed a Deep Flash Cable
I didn't know that my problem was similar to the one in the post because I don't have a 9008 mode
B.
Click to expand...
Click to collapse
There is nothing wrong with your post at all.
Do you have access to see and send Fastboot commands to the phone when on the bootloader screen? You need to get that right first and get your driver on your PC sorted. Forget ADB, that's not going to help you here.
Once you have sorted the above, doing a RAW flash following one of the guides you can find on this form with a rom version that matches your device should get you back on track.
At this stage you shouldn't need EDL or a deep flash cable before exploring the above option.
Good luck.
Hello Andrologic,
Thanks for your reply
I only have access to the Bootloader with 'Start / Restart Bootloader / Recovery Mode / Power Off'.
I bought a Deep Cable, this one detects me when I connect it to the pc, previously my other cables did not want it
So I can indeed use the Fastboot commands whereas before I couldn't
Andrologic said:
There is nothing wrong with your post at all.
Do you have access to see and send Fastboot commands to the phone when on the bootloader screen? You need to get that right first and get your driver on your PC sorted. Forget ADB, that's not going to help you here.
Once you have sorted the above, doing a RAW flash following one of the guides you can find on this form with a rom version that matches your device should get you back on track.
At this stage you shouldn't need EDL or a deep flash cable before exploring the above option.
Good luck.
Click to expand...
Click to collapse
Thank you very much Andrologic!
The phone works like magic again, I can't believe it T_T
When I should do the updates, should I reflash the phone?
It doesn't offer me any new ones even though I'm on Android 11
B.
Balmyr said:
Thank you very much Andrologic!
The phone works like magic again, I can't believe it T_T
When I should do the updates, should I reflash the phone?
It doesn't offer me any new ones even though I'm on Android 11
B.
Click to expand...
Click to collapse
Nice. No, I would suggest updating the conventional way, i.e download ROM for ASUS and let the device pick it up and flash it. If you have TWRP installed, you can flash from there too, but there is no need for that unless the first method is not working
when trying to flash STOCK rom for my hard bricked Vivo Nex 3s in EDL mode, I get that error.
I even put the firmware folder into the same one as QFIL, but to no avail.
I'm using rawprogram_unsparse0.xml and patch0.xml.
The bootloader is locked and I hadn't enabled developer options...
the firmware file doesnt have rawprogram0.xml, so I'm using the one I mentioned.
My phone is stuck in bootloop, because I accidentaly downgraded my phone, and now its stuck at saying "updating", and constantly reboots.
PLEASE SEE LOG IN ATTACHMENT!!
Any help is greatly appreciated.
Make sure to select the correct device type onto the configuration of the application.
Topo's said:
Make sure to select the correct device type onto the configuration of the application.
Click to expand...
Click to collapse
U mean as ufs/emmc? I checked and my phone is ufs type and my phone is definitely recognized as a port..
Topo's said:
Make sure to select the correct device type onto the configuration of the application.
Click to expand...
Click to collapse
Maybe the issue is that the bootloader is locked and my developer options are disabled ? Can I still flash roms of those things are locked?
kskksks said:
Maybe the issue is that the bootloader is locked and my developer options are disabled ? Can I still flash roms of those things are locked?
Click to expand...
Click to collapse
no you can‘t flash roms
kskksks said:
U mean as ufs/emmc? I checked and my phone is ufs type and my phone is definitely recognized as a port..
Click to expand...
Click to collapse
could you give me the error log?
Sure. Here it is:
EDL mode doesn't care about bootloader is locked or developer options. it's just a matter of correct firehose programmer.