NOTE: I Am On Linux Mint 9 32 bit
Okay So I Have Lately been trying TO Get The Latest Android Source Code From Google
Now I Follow The Instructions Down To The Wire (The Ones For Ubuntu, But They Should In Theory Work For Mint 9), And Everything Works Up Until I get To This Part:
Initializing a Repo client
Run "repo init" to bring down the latest version of Repo with all its most recent bug fixes. You must specify a URL for the manifest:
$ repo init -u git://android.git.kernel.org/platform/manifest.git
If you would like to check out a branch other than "master", specify it with -b, like:
$ repo init -u git://android.git.kernel.org/platform/manifest.git -b cupcake
When prompted, configure Repo with your real name and email address. If you plan to submit code, use an email address that is associated with a Google account .
A successful initialization will end with a message such as
repo initialized in /mydroid
Your client directory should now contain a.repodirectory where files such as the manifest will be kept.
Click to expand...
Click to collapse
And When I Try To Run That Line Through The Terminal I Get This Error:
Code:
Traceback (most recent call last):
File "/bin/repo", line 91, in ?
import readline
ImportError: No module named readline
Now I Know What The Problem is, It Is Looking For The readline.so in the the lib folder, Yet Even Though It Is There It Still Wont Work.
Now I Have Tried All 2.x.x Versions Of Python (2.4.6, 2.5.5, & 2.6.4) and None Of Them Work.
Also With Each Version I Run:
Code:
$ ./configure --enable-readline
And Still the Same Error.
i Have Been working On this For About 3 Hours Now And Still Now Luck.
I Tried A Google Search But Every Topic Get Close To Helping Someone Get It Then Stops.
Please Help Me Out Here ?
Okay So I Found The Solution.
repo runs STRICTLY off of 2.4.x and for some reason when I installed Python 2.4.6 readline.so was never put into:
Code:
/usr/local/lib/python2.4/lib-dynload/
So I copied the readline.so from my Python 2.6.4 folder (File Download Below)
and put it into:
Code:
/usr/local/lib/python2.4/lib-dynload/
Then I ran repo again and it worked fine.
Although it withh give you an API mismatch warning, but so far it has worked fine
i had that problem so i edited repo itself and deleted line 91
In all tutorials I found this lines:
cd ~/android/system/device/htc/dream_sapphire/
./extract-files.sh
But i haven't ANY files in this directory(including this scipt). Can you upload for me all folder? I think about /android/system/device/htc/dream-sapphire/.
Thanks!
The command "extract_files.sh" will extract those files from your phone, but you need to have the phone connected via USB with your PC.
Before trying, you should check whether your adb connection with your phone is working.
Sent from my Gingerbread on Dream using XDA
ADB working for me, If I navigate to platform-tools:
[email protected]:~/sdk/platform-tools$ ./adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
But if I am In dream_sapphire folder, terminal show only that extract-files.sh not found:
bash: ./extract-files.sh: No such file or directory
From which sources do you want to build? For ezGingerbread for example the "extract-files.sh" is located in "~android/device/htc/sapphire".
Btw. adb devices should give you a list of connected devices. If that is empty (as you posted) something is not working correctly.
CyanogenMod sources. List of devices is not empty, my phone is present here but I found no need to paste this line.
Sorry, but I'm green in this. I want to learn some about building android. I follow this:
http://wiki.cyanogenmod.com/wiki/HTC_Dream_&_Magic:_Compile_CyanogenMod_(Linux)
But i type
repo init -u git://github.com/CyanogenMod/android.git ics
instead of
repo init -u git://github.com/CyanogenMod/android.git -b froyo-stable
dream/sapphire is not supported by CM7/CM9 and that's the reason you do not have the directory/files you are expecting. If you only want to get the proprietary files, you can also switch to an older release (e.g. CM6) for that project, but nevertheless you need to change several other things, too, before you will get a build. If you are not familiar with building from sources, I suggest you to start with something easier, i.e. CM6 or ezGingerbread.
Or you could run repo init from anddisa's or my git repos. I don't know his from memory but for mine you would run
Code:
repo init -u https://github.com/tvall43/android.git -b ics-ds
AndDiSa's might be a little better right now but I hope to eventually get mine running something close to stable if possible.
The latest version of cm with the dream/sapphire stuff is cm7 (even though they dropped support). Anything past that you'll have to port yourself (like AndDiSa and I) or wait for someone to.
Also, I'm half asleep. I could have (and likely did) post errors that I didn't notice. Google is your friend.
tvall said:
Or you could run repo init from anddisa's or my git repos. I don't know his from memory but for mine you would run
Code:
repo init -u https://github.com/tvall43/android.git -b ics-ds
AndDiSa's might be a little better right now but I hope to eventually get mine running something close to stable if possible.
The latest version of cm with the dream/sapphire stuff is cm7 (even though they dropped support). Anything past that you'll have to port yourself (like AndDiSa and I) or wait for someone to.
Also, I'm half asleep. I could have (and likely did) post errors that I didn't notice. Google is your friend.
Click to expand...
Click to collapse
OK, I just downloaded your repo. But...
Command:
lunch cyanogen_dream_sapphire-eng
Returns:
[email protected]:~/android/system$ . build/envsetup.sh
including device/htc/dream_sapphire/vendorsetup.sh
including vendor/cm/vendorsetup.sh
[email protected]:~/android/system$ lunch cyanogen_dream_sapphire
Invalid lunch combo: cyanogen_dream_sapphire
[email protected]:~/android/system$ lunch cyanogen_dream_sapphire-eng
vendor/htc/dream_sapphire/dream_sapphire-vendor-blobs.mk:46: *** missing separator. Stop.
Device dream_sapphire not found. Attempting to retrieve device repository from CyanogenMod Github (http://github.com/CyanogenMod).
Found repository: android_device_htc_dream_sapphire
Adding dependency: CyanogenMod/android_device_htc_dream_sapphire -> device/htc/dream_sapphire
Traceback (most recent call last):
File "build/tools/roomservice.py", line 170, in <module>
add_to_manifest([{'repository':repo_name,'target_path':repo_path}])
File "build/tools/roomservice.py", line 121, in add_to_manifest
f = open('.repo/local_manifest.xml', 'w')
IOError: [Errno 2] No such file or directory: '.repo/local_manifest.xml'
vendor/htc/dream_sapphire/dream_sapphire-vendor-blobs.mk:46: *** missing separator. Stop.
** Don't have a product spec for: 'cyanogen_dream_sapphire'
** Do you have the right repo manifest?
And next, command:
[email protected]:~/android/system$ mka bacon
Returns:
make: *** No rule to make target `bacon'. Stop.
How to fix this?
Anybody can't help me?
blaster44 said:
Anybody can't help me?
Click to expand...
Click to collapse
Only CM uses the "make bacon" command. Unless they use the CM repo tool in their repo, it will be unavailable. Same goes for AOSP.
Sent from my HTC PH39100 using Tapatalk 2
What is ?
Android is the open-source operating system used for smartphones. Full Freedom for people using it
What is Source Code?
Android is an open-source software stack created for a wide array of devices with different form factors. The primary purposes of are to create an open software platform available for carriers, OEMs, and to make their innovative ideas a reality and to introduce a successful, real-world product that improves the mobile experience for users.The result is a full, production-quality consumer product with source code open for customization and porting.
So basically Allows to customize the things you like and make new things without any Restrictions. Cool isn’t it?
What is ROM ?
The ROM is the operating system. This is the User interface (Sense UI in HTC phones) and the file system for maintaining contacts etc. It is composed of a Linux kernel and various add-ons to achieve specific functionality.
What does a Rom Contain ?
Basically a Rom Contains following main things :
· Kernel
· Bootloader
· Recovery
· Radio
· Framework
· Apps
· core
· -runtime,Etc
Some Basics About Above Terms
Kernel :
A kernel is critical component of the and all operating systems. It can be seen as a sort of bridge between the applications and the actual hardware of a device. devices use the Linux kernel, but it's not the exact same kernel other Linux-based operating systems use. There's a lot of specific code built in, and Google's kernel maintainers have their work cut out for them. OEMs have to contribute as well, because they need to develop hardware drivers for the parts they're using for the kernel version they're using. This is why it takes a while for independent and hackers to port new versions to older devices and get everything working. Drivers written to work with the Gingerbread kernel on a phone won't necessarily work with the Ice Cream Sandwich kernel. And that's important, because one of the kernel's main functions is to control the hardware. It's a whole lot of source code, with more options while building it than you can imagine, but in the end it's just the intermediary between the hardware and the software. So basically if any instruction is given to mobile it first gives the command to kernel for the particular task execution.
Bootloader :
The bootloader is code that is executed before any Operating System starts to run. Bootloaders basically package the instructions to boot operating system kernel and most of them also have their own debugging or modification environment. Think of the bootloader as a security checkpoint for all those partitions. Because if you’re able to swap out what’s on those partitions, you’re able to break things if you don’t know what you’re doing. So basically it commands the kernel of your device to Boot the Device properly without any issues. So careful with bootloader since it can mess things very badly.
Recovery :
Recovery is defined in simple terms as a source of backup. Whenever your phone firmware is corrupted, the recovery does the job in helping you to restore or repair your faulty or buggy firmware into working condition. It is also used for flashing the Rom’s , kernel and many more things.
Radio
The lowest part of software layer is the radio: this is the very first thing that runs, just before the bootloader. It control all wireless communication like GSM Antenna, GPS etc.
What you’ll need
A relatively recent 64-bit computer (Linux, OS X, or Windows)(Virtual Machine will work as well) with a reasonable amount of RAM and about 100 GB of free storage (more if you enable ccache or build for multiple devices). The less RAM you have, the longer the build will take (aim for 8 GB or more). Using SSDs results in considerably faster build times than traditional hard drives.
A decent internet connection & reliable electricity
Some familiarity with basic operation and terminology. It would help if you’ve installed custom roms on other devices and are familiar with recovery. It may also be useful to know some basic command line concepts such as cd for “change directory”, the concept of directory hierarchies, that in Linux they are separated by /, etc.
Install the SDK
If you haven’t previously installed adb and fastboot, you can download them from Google. Extract it running:
Code:
unzip platform-tools-latest-linux.zip -d ~
Now you have to add adb and fastboot to your PATH. Open ~/.profile and add the following:
Code:
# add SDK platform tools to path
if [ -d "$HOME/platform-tools" ] ; then
PATH="$HOME/platform-tools:$PATH"
fi
Then, run source ~/.profile to update yur environment.
Install the build packages
Several packages are needed to build LineageOS. You can install these using your distribution’s package manager.
To build LineageOS, you’ll need:
bc bison build-essential curl flex g++-multilib gcc-multilib git gnupg gperf imagemagick lib32ncurses5-dev lib32readline-dev lib32z1-dev libesd0-dev liblz4-tool libncurses5-dev libsdl1.2-dev libssl-dev libwxgtk3.0-dev libxml2 libxml2-utils lzop pngcrush rsync schedtool squashfs-tools xsltproc zip zlib1g-dev
For Ubuntu versions older than 16.04 (xenial), substitute:
libwxgtk3.0-dev → libwxgtk2.8-dev
Java
Different versions of LineageOS require different JDK (Java Development Kit) versions.
LineageOS 14.1: OpenJDK 1.8 (install openjdk-8-jdk)
LineageOS 11.0-13.0: OpenJDK 1.7 (install openjdk-7-jdk)*
https://askubuntu.com/questions/761127/how-do-i-install-openjdk-7-on-ubuntu-16-04-or-higher
Create the directories
You’ll need to set up some directories in your build environment.
To create them:
Code:
mkdir -p ~/bin
mkdir -p ~//lineage
Install the repo command
Enter the following to download the repo binary and make it executable (runnable):
Code:
curl [url]https://storage.googleapis.com/git-repo-downloads/repo[/url] > ~/bin/repo
chmod a+x ~/bin/repo
Put the ~/bin directory in your path of execution
In recent versions of Ubuntu, ~/bin should already be in your PATH. You can check this by opening ~/.profile with a text editor and verifying the following code exists (add it if it is missing):
Code:
# set PATH so it includes user's private bin if it exists
if [ -d "$HOME/bin" ] ; then
PATH="$HOME/bin:$PATH"
fi
Then, run source ~/.profile to update your environment.
Initialize the LineageOS source repository
Code:
cd ~//lineage
repo init -u [url]https://github.com/LineageOS/.git[/url] -b lineage-15.1
Download the source code
Code:
repo sync -c -f --force-sync --no-clone-bundle --no-tags --optimized-fetch --prune
Prepare the device-specific code
Code:
git clone [url]https://github.com/TheScarastic/android_device_xiaomi_msm8953-common[/url] -b lineage-15.1 device/xiaomi/msm8953
git clone [url]https://github.com/TheScarastic/android_device_xiaomi_tissot[/url] -b lineage-15.1 device/xiaomi/tissot
git clone [url]https://github.com/TheScarastic/proprietary_vendor_xiaomi[/url] -b lineage-15.1 vendor/xiaomi
git clone [url]https://github.com/Tissot-Development/android_kernel_xiaomi_tissot[/url] -b 8.1 kernel/xiaomi/msm8953
Turn on caching to speed up build
Code:
export CCACHE_DIR=./.ccache
ccache -C
export USE_CCACHE=1
export CCACHE_COMPRESS=1
prebuilts/misc/linux-x86/ccache/ccache -M 50G
Configure jack
Jack is the new Java compiler used when building LineageOS 14.1. It is known to run out of memory - a simple fix is to run this command:
Code:
export _JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
Make Clean Build
Code:
make clean
Initialize the build command
Code:
source build/envsetup.sh
Start Build
Code:
croot
brunch tissot
For More info:
https://source..com/source/requirements
https://wiki.lineageos.org/devices/cheeseburger/build
Thanks bro..
DGEEEK said:
Thanks bro..
Click to expand...
Click to collapse
Thany you for this guide! Will try this!
saski4711 said:
Thany you for this guide! Will try this!
Click to expand...
Click to collapse
:good:
Thanks for guide, btw what's the size of source code ?
prabhjot-singh said:
Thanks for guide, btw what's the size of source code ?
Click to expand...
Click to collapse
Around 20-25GB I think
Followed the above steps to the letter but I get an error right at the beginning:
Code:
ninja: error: 'kernel/xiaomi/msm8953/arch/arm64/configs/lineage_tissot_defconfig', needed by '/home/rossi/android/lineage/out/target/product/tissot/obj/KERNEL_OBJ/.config', missing and no known rule to make it
build/core/ninja.mk:151: recipe for target 'ninja_wrapper' failed
make: *** [ninja_wrapper] Error 1
make: Leaving directory '/home/rossi/android/lineage'
Current git broken? Any idea?
saski4711 said:
Followed the above steps to the letter but I get an error right at the beginning:
Code:
ninja: error: 'kernel/xiaomi/msm8953/arch/arm64/configs/lineage_tissot_defconfig', needed by '/home/rossi/android/lineage/out/target/product/tissot/obj/KERNEL_OBJ/.config', missing and no known rule to make it
build/core/ninja.mk:151: recipe for target 'ninja_wrapper' failed
make: *** [ninja_wrapper] Error 1
make: Leaving directory '/home/rossi/android/lineage'
Current git broken? Any idea?
Click to expand...
Click to collapse
Hello,
Don't use that kernel, as actually don't work properly in Xiaomi Mi A1. This error is caused because the file "lineage_tissot_defconfig" it's not named like that, exactly it's name is "tissot_defconfig", for your first build with lineage I recommend you to use the following sources, because are adapt for Lineage. Don't forget to use superuser privileges to compile, it avoids a lot of possible errors with normal user.
Device tree
Vendor
Kernel
Give thanks to user @ghpranav for sources :good:
Regards
black_arashi said:
Hello,
Don't use that kernel, as actually don't work properly in Xiaomi Mi A1. This error is caused because the file "lineage_tissot_defconfig" it's not named like that, exactly it's name is "tissot_defconfig", for your first build with lineage I recommend you to use the following sources, because are adapt for Lineage. Don't forget to use superuser privileges to compile, it avoids a lot of possible errors with normal user.
Device tree
Vendor
Kernel
Give thanks to user @ghpranav for sources :good:
Regards
Click to expand...
Click to collapse
Thanks for the info. I'm now past the error. Will take some time though since I'm building on my laptop :cyclops:
saski4711 said:
Thanks for the info. I'm now past the error. Will take some time though since I'm building on my laptop :cyclops:
Click to expand...
Click to collapse
Between 3 to 5h in modern pc, probably you will need between 7 to 10h in a laptop, depends on Nº of Cores and RAM, anyway, good luck in your first compilation :good:
black_arashi said:
Between 3 to 5h in modern pc, probably you will need between 7 to 10h in a laptop, depends on Nº of Cores and RAM, anyway, good luck in your first compilation :good:
Click to expand...
Click to collapse
Thx m8. Still no error. Compiling over night on single core to avoid throttling / overheating. :highfive:
saski4711 said:
Thx m8. Still no error. Compiling over night on single core to avoid throttling / overheating. :highfive:
Click to expand...
Click to collapse
Probably you will se a lot of "warning" don't apologice, it's normal, these warning issues is being solved during the compilation. Some info just in case
saski4711 said:
Followed the above steps to the letter but I get an error right at the beginning:
Current git broken? Any idea?
Click to expand...
Click to collapse
Rename tissot_defconfig to lineage_tissot_defconfig in arch/arm64/configs
Nice share brotherr :good:
Keep mia1 like the sky full of stars, so many custom rom :highfive::laugh:
Sent from my Xiaomi Mi A1 using XDA Labs
-Rhoby|™-Bugs said:
Nice share brotherr :good:
Keep mia1 like the sky full of stars, so many custom rom :highfive::laugh:
Click to expand...
Click to collapse
Thanks
Hello and thanks for the guide.
I am trying to build Dirty Unicorns 7.1.2 for tissot. I have downloaded kernel, vendor and device and repo synced DU n7x branch. I have also downloaded device_qcom_sepolicy and changed some files in device/xiaomi/tissot folder in order for the build to start normally. After 1.30 minutes of building i get this error
Code:
ninja: error: '/home/manoskav/du-tissot/out/target/product/tissot/obj/STATIC_LIBRARIES/bootctrl.msm8953_intermediates/export_includes', needed by '/home/manoskav/du-tissot/out/target/product/tissot/obj/EXECUTABLES/update_engine_sideload_intermediates/import_includes', missing and no known rule to make it
make: *** [build/core/ninja.mk:167: ninja_wrapper] Error 1
Maybe should i try n7x-caf branch or n7x is ok for tissot? Can anyone help me with the building process?
Thanks in advance.
mparmpas122321 said:
Hello and thanks for the guide.
I am trying to build Dirty Unicorns 7.1.2 for tissot. I have downloaded kernel, vendor and device and repo synced DU n7x branch. I have also downloaded device_qcom_sepolicy and changed some files in device/xiaomi/tissot folder in order for the build to start normally. After 1.30 minutes of building i get this error
Maybe should i try n7x-caf branch or n7x is ok for tissot? Can anyone help me with the building process?
Thanks in advance.
Click to expand...
Click to collapse
Hmm but seriously it's tougher bro because its bootctrl it need more configuration
I tried building for Tissot but I'm having this issue.
[email protected]:~/dos$ . build/envsetup.sh
including device/generic/car/vendorsetup.sh
including device/generic/mini-emulator-arm64/vendorsetup.sh
including device/generic/mini-emulator-armv7-a-neon/vendorsetup.sh
including device/generic/mini-emulator-x86_64/vendorsetup.sh
including device/generic/mini-emulator-x86/vendorsetup.sh
including vendor/discovery/vendorsetup.sh
[email protected]:~/dos$ brunch tissot
including vendor/discovery/vendorsetup.sh
build/core/product_config.mk:236: *** Can not locate config makefile for product "tissot". Stop.
build/core/product_config.mk:236: *** Can not locate config makefile for product "tissot". Stop.
No such item in brunch menu. Try 'breakfast'
[email protected]:~/dos$
Click to expand...
Click to collapse
Can anyone please help me out?
black_arashi said:
Hello,
Don't use that kernel, as actually don't work properly in Xiaomi Mi A1. This error is caused because the file "lineage_tissot_defconfig" it's not named like that, exactly it's name is "tissot_defconfig", for your first build with lineage I recommend you to use the following sources, because are adapt for Lineage. Don't forget to use superuser privileges to compile, it avoids a lot of possible errors with normal user.
Device tree
Vendor
Kernel
Give thanks to user @ghpranav for sources :good:
Regards
Click to expand...
Click to collapse
@black_arashi
Oh so ghpranav's repo has LOS source added into it? If so is there any Android Stock for all these?
Thanks
The problem with reading the articles on XDA is that eventually you want to try out some of the things described in these pages. I am no exception. After reading the superb article https://forum.xda-developers.com/mi-a1/how-to/guide-build-rom-source-tissot-t3754723 I decided to try my hand at developing the ROM for the Xiaomi MiA1. This is my daily driver and that in itself was a strong reason for motivation.
I tried replicating the steps given in the article on my Dell Inspiron and immediately ran into issues. The basic requirements mentioned are a linux or Mac computer. So to start with I formatted my laptop. Removed windows 10 and installed Ubuntu's latest 18.04 LTS.
I believed I had the next set of requirements for custom ROM development which were
• A basic understanding of Linux based OS specifically Ubuntu.
• Ability to type and use the command line. Write or copy paste commands in the Ubuntu konsole.
• A basic understanding of programming concepts, read and update XML files, understand error messages.
• Fast internet access.
• Steady electricity supply.
• Lots and lots of patience.
This still did not solve my problem. The build would crash repeatedly. Then I read the https://source.android.com/setup/. A whole new set of requirement came up. The article said that ideally the build system should exceed these conditions
• 64 bit environment
• 100 GB of free hard disk space
• 16 GB RAM / swap space.
At home my son was about to buy a new PC and this made his old PC available. I upgrade the RAM and added a new hard disk. Now my hardware configuration was as under :
• Intel i5 processor
• 16 GB RAM
• 1 TB hard disk.
With a new hard disk I had to create a boot-able USB drive. This I achieved with Rufus. My old laptop which again had its Windows 10 installation was used to install Rufus based on the instructions i got from https://rufus.akeo.ie/
The latest version of Ubuntu I downloaded from https://www.ubuntu.com/download/desktop
Setting Ubuntu from scratch for someone used to the world of windows is not exactly easy. I found the tutorial at https://tutorials.ubuntu.com/tutorial/tutorial-install-ubuntu-desktop#0 extremely helpful.
I wrote down the steps I took in reaching the final goal of a Lineage ROM for my Mi A1.
Step 1: Setup Ubuntu - already completed
I chose the default settings as recommended in the setup.
Step 2: Installation of Java Development Kit
Once Ubuntu was up and running I opened a konsole window and typed the following commands
PHP:
sudo apt-get update
sudo apt-get install openjdk-8-jdk
Ubuntu did all the installing as I looked on.
Step 3: Installing required packages
PHP:
sudo apt-get install git-core gnupg flex bison gperf build-essential zip curl zlib1g-dev gcc-multilib g++-multilib libc6-dev-i386 lib32ncurses5-dev x11proto-core-dev libx11-dev lib32z-dev libgl1-mesa-dev libxml2-utils xsltproc unzip
Step 4: Configure your smart phone access
I next installed the tools required to access the phone. This access would be required to later flash the phone or access its internals with ADB.
PHP:
sudo apt-get install android-tools-adb
sudo apt-get install fastboot
Step 5: To creating the work directories i typed the following commands. I was following the instructions from the above two articles alternately.
PHP:
mkdir -p ~/bin
mkdir -p ~//lineage
Step 6: Installing repo
I was informed that the Android source tree is located in a Git repository which is hosted by Google. The Git repository includes metadata for the Android source. Repo is a tool that makes it easier to work with Git .
PHP:
curl [url]https://storage.googleapis.com/git-repo-downloads/repo[/url] > ~/bin/repo
Once the repo was downloaded I had to make it executable
PHP:
chmod a+x ~/bin/repo
Step 7: The next step was to initialize the lineage source
This required to change to the directory created in step number 5 above. As someone coming from the world of windows I preferred to use the GUI and open the lineage folder created by using the mouse click. There right click brings up the option of ' Open in Terminal' . Those who prefer to type commands can use the below command
PHP:
cd ~//lineage
Once I had made sure that I was in the newly created lineage folder I moved ahead.
Step 8: Now i was required to configure my Git user
PHP:
git config --global user.name "Your Name"
git config --global user.email "[email protected]"
I replaced the text within the " " with my creadentials, which I had created on https://github.com/
Step 9: Now we moved on to initializing the repo
PHP:
repo init -u [url]https://github.com/LineageOS/android.git[/url] -b lineage-15.1
A successful initialization showed a message stating that Repo is initialized in your working directory. The lineage directory now contain a .repo folder. To check hidden folder I used control + H key.
Step 8: Download the source code
This is the step where you will realize the importance of having a fast internet connection. The source code size is about 30 – 35 GB. I have a 10 mbps line and at times the download speed shoots up to 20- 25 mbps!!!* Yet it takes me anything from 4 – 10 hours to download the entire code!
My suggestion is check the time when your local ISP download speeds are at its best. For me it is during the night. I set the download up at night and go to sleep!
The command to get the source code is :
PHP:
repo sync -c -f --force-sync --no-clone-bundle --no-tags --optimized-fetch –prune
Optional Step 8 a: Making a backup of your source code
I copied the entire folder and kept a copy on an external device. This is just in case there is any need for me to format my hard disk. While copying I do not copy the .Repo and .Cache folders on to my backup. To check hidden folders press control + H keys.
Step 9: Get the source code for your specific device.
This is where I was stuck numerous times. As I understood the code which was downloaded is generic in nature. For your particular device you would need to get files which are specific to your device.
The source for all these files is github. You are targeting three sets of folders – Device, Kernel and vendor.
The git clone commands given below are for the tissot or Xiaomi MiA1 phone. Similarly other phones have their locations on GitHub from where you can get files specific to them.
PHP:
git clone [url]https://github.com/TheScarastic/andr...msm8953-common[/url] -b lineage-15.1 device/xiaomi/msm8953
git clone [url]https://github.com/TheScarastic/andr..._xiaomi_tissot[/url] -b lineage-15.1 device/xiaomi/tissot
git clone [url]https://github.com/TheScarastic/prop..._vendor_xiaomi[/url] -b lineage-15.1 vendor/xiaomi
git clone [url]https://github.com/Tissot-Developmen..._xiaomi_tissot[/url] -b 8.1 kernel/xiaomi/msm8953
Step 10: Modify Caching to speed up the build process.
PHP:
export CCACHE_DIR=./.ccache
ccache -C
export USE_CCACHE=1
export CCACHE_COMPRESS=1
prebuilts/misc/linux-x86/ccache/ccache -M 50G
Step 11: Configure JACK
JACK is the java compiler and can cause crashes – believe me! A simple fix is this command which you type next
PHP:
export _JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
Step 12: Cleaning up the build folder
PHP:
make clean
Step 13: Initializing the build
PHP:
source build/envsetup.sh
Step 14: Starting the build
PHP:
croot
brunch tissot
Watching the build on the screen is an interesting phase. It can get a bit tedious. In my case it took about 3 hours to complete the build. There were numerous errors that were thrown up. Files were declared as missing. After a couple of failures I realized I could search for them and then paste the file in the appropriate folders.
The one good thing about the build errors is googling for them usually gets you the right help. There would definitely be someone in some part of the world who would have run into a similar issue.
Finally after a 3 hour wait I got my zip file which when i flashed through TWRP on my MiA1. The sheer joy of having a ROM you created on your phone is indeed beyond words. It took me about a week of sitting for about ten to fifteen hours to get the various combination right, but believe me when I tell you the results are worth it.
My thanks to arunassain https://forum.xda-developers.com/member.php?u=6768248 from whose article I was able to understand the basics. He helped me with responses to my queries when I was stuck.
I further picked up from the excellent articles under the title Establishing a build Environment at https://source.android.com/setup/build/initializing
A great video that helped me was available on the topic How to build your own custom Android ROM at https://www.androidauthority.com/build-custom-android-rom-720453/
To check out the ROM's built for the MiA1 please click here
Now coming to the question if I have understood everything that is to learn about ROM development, well the answer is no. This was just the first build by a noob of a ROM which somehow worked. I have been using the ROM on my daily driver for the past one day and it is working perfectly. Having said that I still need to understand more of what happens behind the scenes in this wonder world of Custom ROM development.
Don't tell me you thought that you could build a rom on x86 processor/OS
Give him a break, he admitted that he is new to this building ROM world, I can understand that some people can think that if a proc is powerful enough they can use it to build no matter if it's a x64 or x86.
Thanks for you story mate! And don't hesitate to ask dev on telegrams or G+ to explain you some what you don't understand :good: I'm pretty sure that would love to finally have someone like you, who is truly interested in this whole world