I really screwed up this time...
I did a factory reset on my phone, which means that the settings are back to default and I don't have USB debugging. Me being careless, I was in download mode and while trying to setup TWRP I typed:
"fastboot flash boot twrp-3.0.0-3-hiae.img"
instead of
"fastboot flash recovery twrp-3.0.0-3-hiae.img"
Now whenever I boot it takes me to my recovery and I can't change the boot image because USB debugging is disabled. I hope my htc isn't done because of my carelessness.
what happens when you tell twrp to reboot to recovery or download mode? I'm guessing that those are still factory, if so, fastboot commands might work in one of those, if you can get into one, to reflash boot.
Recovery mode shows a phone icon, then you need to press and hold power button and tap vol up to go fully into recovery mode.
Related
Hi I have the following problem: after I flash Cannibal open touch recovery I could not flash any .zip file so I decided that I go back to CWM touch so I restarted my phone. Phone booted into fastboot mode with the following message no boot or recovery IMG so I decided to flash recovery with fastboot. I opened the folder with fastboot command flash_recovery connect the phone to usb but the command line always showed waiting for device. I unplugged the phone and tried to press the volume keys but nothing happened as if it freezes. I pulled the battery and try it again but no response. I cant connect phone to odin because it has broken power button and after I insert the battery it always turn on itself. Please advise me what to do thank you.
Seems your drivers have gone corrupt. Try a different system and use Nexus Root Toolkit.
I tried this option but without success. Phone does not respond to anything. No volume up or volume down. It´s just stucked on bootloader.
This link says that if you get <waiting for device> , then fastboot is not configured properly. Check out the link over here.
You may also try this command "fastboot boot recovery-clockwork-6.0.4.3-crespo.img" to boot into recovery without installing it.
no hope
The reason you cannot navigate in fastboot/bootloader is that your powerswitch is probably stuck in the "on position"...does your device immediately power on when battery is inserted?
The way i solved this a few months ago was to completly remove my powerswitch from the board power my device on..use quickboot to enter fastboot menu and input commands...
Also completely removing your power button makes powering on your nexus alot more complicated.
what i did was go to download mode (holding vol+ and -) and pluging phone in..this takes you to download mode
then you need to get a copy of a boatloader file to flash via odin which will reset your phone and power it on...pm me if interested i can provide you with files necessary
Hi,
I have a problem with my One Plus One. When I open the phone, there is only the "CYANOGEN RECOVERY" screen that appears.
I can access sideloading using the menu but it is not working. I tried to sideload CM12 and it is looping back to the recovery screen
More over, I cannot access fastboot mode. I tried to use adb to reboot the phone in fastboot mode but adb only sees the phone in sideload mode
The Power + vol up combinaison doesn't work...it will come back to the recovery screen
Any idea ?
gspfranc said:
Hi,
I have a problem with my One Plus One. When I open the phone, there is only the "CYANOGEN RECOVERY" screen that appears.
I can access sideloading using the menu but it is not working. I tried to sideload CM12 and it is looping back to the recovery screen
More over, I cannot access fastboot mode. I tried to use adb to reboot the phone in fastboot mode but adb only sees the phone in sideload mode
The Power + vol up combinaison doesn't work...it will come back to the recovery screen
Any idea ?
Click to expand...
Click to collapse
Are you attempting to boot into fastboot with the cable connected? That's been known to cause issues, so unplug and try again.
Hey guys, so I have this dilemma on my hands. One of my friends has a Nexus 5 that has a power button issue. It seemed like a stuck power button, because even cleaning it did not solve the issue. So I removed the power button, and it finally turned on. However, it's now stuck in a Google logo bootloop.
The Objective:
To recover all data on the device. This is a must.
The Obstacles:
- No physical power button, but I can place a pair of tweezers on the terminals on the board to simulate a power button press.
- Bootloader is locked (I can unlock it, but that erases all data on the phone).
- Cannot enter proper stock recovery (I get a "no command" error when I do; I've tried all button combinations afterwards, including the ones from HERE, but to no avail).
- USB debugging was not enabled on the phone when booting normally, so even though the phone is recognized by my PC, I cannot do anything using ADB.
- Fastboot mode is the only successful mode I can reach on the phone.
The Final Question:
Does anyone know how I can successfully recover all the data on the phone using ADB or any other method, having the above obstacles?
Thanks in advance.
If you can reach fastboot without any problem, you can try to boot a custom recovery image using the following command : fastboot boot recovery yourcustomrecovery.img
(if you dont have a custom recovery, you need to flash one with : fastboot flash recovery yourcustomrecovery.img)
It will boot in recovery mode and, I hope, allow you to have an adb access and recover your data.
edit : since your bootloader is locked, i guess this won't work.
MrKhozam said:
Hey guys, so I have this dilemma on my hands. One of my friends has a Nexus 5 that has a power button issue. It seemed like a stuck power button, because even cleaning it did not solve the issue. So I removed the power button, and it finally turned on. However, it's now stuck in a Google logo bootloop.
The Objective:
To recover all data on the device. This is a must.
The Obstacles:
- No physical power button, but I can place a pair of tweezers on the terminals on the board to simulate a power button press.
- Bootloader is locked (I can unlock it, but that erases all data on the phone).
- Cannot enter proper stock recovery (I get a "no command" error when I do; I've tried all button combinations afterwards, including the ones from HERE, but to no avail).
- USB debugging was not enabled on the phone when booting normally, so even though the phone is recognized by my PC, I cannot do anything using ADB.
- Fastboot mode is the only successful mode I can reach on the phone.
The Final Question:
Does anyone know how I can successfully recover all the data on the phone using ADB or any other method, having the above obstacles?
Thanks in advance.
Click to expand...
Click to collapse
I bit of a trick. Try 'fastboot flash boot recovery.img' but instead of kernel flash twrp. After flash do a 'fastboot reboot'. It will boot recovery. Via twrp the pc will recognize phone as a media storage. You will not erase any data
icrunchbanger said:
I bit of a trick. Try 'fastboot flash boot recovery.img' but instead of kernel flash twrp. After flash do a 'fastboot reboot'. It will boot recovery. Via twrp the pc will recognize phone as a media storage. You will not erase any data
Click to expand...
Click to collapse
Thanks for the response, but the bootloader has to be unlocked for that to work, and while I can do that, it will wipe the data I need.
Okay, so I had been out of the flashing game for a while now, and recently got a Pixel 128Gb after using my trusty Nexus 6P, and I attempted to do Fastboot boot-to-root.img, which now has me stuck in a weird bootloop issue.
It boots, gives me the stupid can't be checked for corruption ****, gets to the white Google Screen, then there is a weird visual glitch, a blue line appears near the bottom of the screen, then the phone immediately reboots and does it all over again after doing a ramdump.
I can't even get into recovery to manually flash the stock image, as soon as I try to select RECOVERY it jumps to the boot screen where it tells me again that it cant be checked for corruption, and then starts the bootloop all over again.
ADB cant recognize it for whatever reason either. So now I'm probably not your average ****ed, I'm advanced ****ed.
Any body have any ideas?
boot-to-root is for Android O, you have to follow this guide
I had this same exact problem and I was able to fix it by reflashing the factory image. You said adb cannot recognize your device. But what about fastboot? If you reboot into the bootloader, connect to your PC, and execute "fastboot devices", does your device show? Download the latest factory image here. Extract it and execute flash-all.bat. Let me know if this helps.
You don't understand. When you attempt to reboot and go into recovery the manual way, the moment you select Recovery, the phone reboots and attempts to boot up, fails, performs write to ext4 ramdump, then loops over and over. ADB won't work because it wiped with the fastboot oem unlock which wiped the device, meaning no developer mode, which means no usb debugging.
Doesn't matter. Google is sending me a new one.
:/
jdkzombie said:
You don't understand. When you attempt to reboot and go into recovery the manual way, the moment you select Recovery, the phone reboots and attempts to boot up, fails, performs write to ext4 ramdump, then loops over and over. ADB won't work because it wiped with the fastboot oem unlock which wiped the device, meaning no developer mode, which means no usb debugging.
Doesn't matter. Google is sending me a new one.
:/
Click to expand...
Click to collapse
Fastboot and recovery are two different things. If you hold volume down + power it'll show you the bootloader screen (fastboot), this is where you'd usually select recovery. But if you stay on that screen, you can flash images to your phone. To fix your bootloop, download the boot.img from the stock ROM and use these commands in fastboot:
fastboot flash --slot _a boot boot.img
fastboot flash --slot _b boot boot.img
Then reboot normally.
falsh factory image inside the bootloader, don't need to go to recovery.
Step by Step
Thanks to previous experience with hacking devices (Android, Sony, etc.), patience and only allowing myself to freak out for a few seconds. A couple Google searches lead me to reflashing my Google Pixel 128GB and not sending it back to OEM.
So for the less patient I will break down the steps to do stop the bootlooping.
DON'T PANIC
Either hold down power until your phone turns completely off or wait for the bootlooping to do it for you. It usually only loops a few times before powering down.
Hold Power + Volume Down until it boots into the Fastboot mode.
[This is the screen that says you Phone Stats (serial #, cpu, ram, etc.) and has an Android picture on it laying down.]
Connect your Phone to your computer using a USB 3.0 port.
[My PC wouldn't recognize my phone at all when connected to USB 2.0]
Download from Full Factory Image from Google. { https://developers.google.com/android/images }
[Mine was "7.1.2 (N2G47O, May 2017)" for my Project Fi 128GB Pixel, but make sure you get the one for your phone]
Navigate to where your SDK/Fastboot folder is on your PC
[Unless you moved it, it is usually "C:\Users\USERNAME\AppData\Local\Android\Sdk" by default.]
Unzip the Contents of your Full Factory Image zip file to this location in it's own directory (for cleanliness).
Open a Command Prompt with a Right-Click "Run as Administrator" and navigate you your new zip file's directory.
["\platform-tools\sailfish-n2g47o" or whatever version of the Full Factory Image you used was.]
Type in "flash-all.bat" and wait for your phone to finish its installation. Your phone will restart itself into Fastboot Mode many times during this process.
Once it is finished, you phone should boot into its normal "First Boot Sequence" like you just started it up for the very first time.
At this point you can try flashing something else or use a different technique to update your recovery mode or ROM.
Good Luck.
Code:
TRY THIS AT YOUR OWN RISK! This could brick your phone. It shouldn't but it can. If you brick your phone, or anything stops working on your phone, YOU are responsible.
Reboot combinations:
Fastboot: Shutdown and with USB cable hold power and volume down until it says FASTBOOT MODE at the bottom
Recovery: Shutdown and with USB cable hold power and volume down until the
Code:
Please release key to power off *
dissapears.
Unlocking Bootloader
Code:
Note: This will delete all user data! Backup all your data before doing this!
This part of the guide is part of the tutorial made by @Arin59 at https://forum.xda-developers.com/nokia-3/how-to/method-to-unlock-bootloader-nokia-3-pie-t4012285
First of all convert your serial number (should look like NE1*************) to MD5 Hash and enable OEM Unlock in developer options.
Then reboot to fastboot and type
Code:
fastboot oem key {HASH}
then type
Code:
fastboot flashing unlock
.
To reboot to Android, run fastboot reboot.
Installing TWRP
Code:
This will delete your user data, but it should be already deleted.
You can use any TWRP image made for this device but I had the most success with https://forum.xda-developers.com/nokia-3/development/twrp-teamwin-recovery-nokia-3-t3762512 .
Flash your TWRP Image chosen with
Code:
fastboot flash recovery your-recovery-image.img
and then reboot to recovery.
In TWRP go to Wipe and then Format Data and type yes.
Install Magisk
Install Magisk normally.
< waiting for device >
I put the phone in fastboot mode and ran fastboot with the oem key md5 hash command but it just said "< waiting for device >". I think it might be because I forgot to install the Nokia 3 USB drivers. I'm using a linux computer, do I need to find OS specific drivers?
edit: And now my phone is stuck in fastboot mode and for some reason will not shutdown no matter how long I hold down the power button for.
Totalitor said:
I put the phone in fastboot mode and ran fastboot with the oem key md5 hash command but it just said "< waiting for device >". I think it might be because I forgot to install the Nokia 3 USB drivers. I'm using a linux computer, do I need to find OS specific drivers?
edit: And now my phone is stuck in fastboot mode and for some reason will not shutdown no matter how long I hold down the power button for.
Click to expand...
Click to collapse
If you're using a linux computer, you should try running the command with sudo.
If it doesn't work, try with another cable (or computer if it doesn't work) and try again.
#AC said:
If you're using a linux computer, you should try running the command with sudo.
If it doesn't work, try with another cable (or computer if it doesn't work) and try again.
Click to expand...
Click to collapse
Thanks. I've since got it working. For some reason I had to use the -i argument (the interface argument) along with the code for the device (0x2e04) "fastboot -i 0x2e04 <command>".
However, I've recently bypassed the "NO COMMAND" screen and gained access to TWRP custom recovery but in trying to shut down the phone, it shuts down fine but only boots up in fastboot mode. Even using the fastboot reboot command from adb tools boots it up in fastboot mode. This is a problem as I need to boot it in its normal mode so I can download the magisk.zip file required for installing magisk but I seem to be unable to do so.
Totalitor said:
Thanks. I've since got it working. For some reason I had to use the -i argument (the interface argument) along with the code for the device (0x2e04) "fastboot -i 0x2e04 <command>".
However, I've recently bypassed the "NO COMMAND" screen and gained access to TWRP custom recovery but in trying to shut down the phone, it shuts down fine but only boots up in fastboot mode. Even using the fastboot reboot command from adb tools boots it up in fastboot mode. This is a problem as I need to boot it in its normal mode so I can download the magisk.zip file required for installing magisk but I seem to be unable to do so.
Click to expand...
Click to collapse
Try holding volume up and down at the same time while holding the power button.
#AC said:
Try holding volume up and down at the same time while holding the power button.
Click to expand...
Click to collapse
Thanks, it worked.
Though I tried wiping, but it didn't solve the booting issue. Unsure how to proceed at this point. I feel like I've tried everything. Actually, I just checked my /boot folder and it's empty...is that why it's always booting into fastboot?
I tried using adb to sideload the magisk.zip file but then the phone rebooted into stock recovery??
Any and all guides on this say to download the magisk.apk either into the SD card or internal storage, but I don't have a micro SD card and I can't access the normal mode of the phone to download anything.
What can I do?
I've flashed TWRP successfully but forgot to download the magisk.apk. Now whenever I boot up my phone, it boots into stock recovery mode automatically, even if I tell TWRP to reboot into system it reboots into Stock Android recovery. I can still access TWRP by holding down the up + power buttons on boot though, but I can't access the normal mode of the phone anymore.
I tried using TWRP's sideload feature with ADB tools to sideload Magisk.zip and it said it succeeded but in using TWRP's install feature to find the zip file, it wasn't in /sideload/ or /storage/ as both were empty.
How can I temporarily restore normal functionality so I can simply download the Magisk manager.apk?