[APP] - WiFi Checker - Android Apps and Games

A simple app to check whether your WIFI is connected or not. It then disables your WIFI when no connection is found (i.e. keeping your WIFI from hogging battery when not in use).
Also turn your WIFI "ON" once then turn it "OFF" later without the check intervals. Check FAQ for the explanation.
*NOTE - Check FAQ below or In App if you have any issues*
*Built-in FEATURES*
- Set how long it takes to check
- Set when to check
- Set the minimum signal strength required to connect
- Show surrounding AP info while scanning in the background & AP info when connected
- Disable WIFI when no internet connection is found
- Do a manual check
- Other minor features
Download it from XDA Labs - https://labs.xda-developers.com/store/app/wifi.checker.rf
Android Support - 4.0+
Optional Donation
Donate HERE if you feel like it
Feedback is much appreciated, whether it's bugs you experience or would like to see a new feature.
FAQ
1) "I want to automate my WIFI Connection, but without the checking intervals" - Easy, just set the time you want your WIFI to turn "ON" & "OFF" using the "Time to check:", then disable the check interval & lastly disable the "Notifications" in the "Notification Config" tab.
2) "I'm getting unreliable checks when the screen is off" - There is no built-in way around battery saving features/apps, so you'll need to whitelist the app in Battery Optimization/Greenify/Doze or any other battery saving app (it will not drain your battery, promise!)
3) "Even though i whitelisted the app i get unreliable checks (using a Sony Device with Stamina Mode Enabled)" - I do not have a workaround other than whitelisting, it is difficult to build support when i do not have a Sony Device to test on.
4) "WIFI turned off even if an Internet Connection is available" - Try disabling the ability to check for an Internet Connection under Extra Config tab.
5) "Please publish on Google Play" - I will publish on Google Play as soon as i have the available funds for a Developer Registration Fee.
6) "Do i need a Rooted Device" - No, Root is NOT needed
Changelog (v3.6)
* Improved WIFI switch when time ends
* WIFI now switched on when check time starts, instead of starting from an "Off" state
* Fixed incorrect variable shown on check titles
* Fixed boot check to run only when necessary
* Other minor bugs squashed and code improvements

Is it similar to WPS connect or Wifi master key? I am using WPS connect and it runs smoothly. It is available at this: http://goo.gl/KgWm9s

lanalana said:
Is it similar to WPS connect or Wifi master key? I am using WPS connect and it runs smoothly. It is available at this: http://goo.gl/KgWm9s
Click to expand...
Click to collapse
I am not sure, will download them and have a look.
But in short, the app uses your saved WIFI networks (it does not connect to any open Access Point/Hotspot automatically). You specify when it should check, then it checks if there are any saved Hotspots in range and connects to it for you automatically (if there are no saved Hotspots in range, it automatically disables your WIFI until the next check).
Every time it checks it also saves a list of Hotspots picked up with their security, signal strength, mac address etc. (different details are also shown when connected to a hotspot for example: ip address, speed of connection, etc.)
This app is actually designed for an automated WIFI connection.

Is it a known bug that this app does not work reliably when the screen is turned off?
Thanks in advance

Freezy202 said:
Is it a known bug that this app does not work reliably when the screen is turned off?
Thanks in advance
Click to expand...
Click to collapse
It is a known bug, because i have not found a way around other Battery Saving features yet.
[EDIT]OP has been updated[/EDIT]
You'll see in the OP i said that you should add "WiFi Checker" as an exception (whitelist) in any battery saving app that you may have installed. That includes Android's built-in Battery Optimization / Doze Mode. Also if you have a Sony Device with Stamina Mode enabled, you will have problems if the app is not whitelisted.
Let me know if the issue persists then i'll look into it for you.

publish on google play
I suggest you publish on Google play store

matinsaeedi said:
I suggest you publish on Google play store
Click to expand...
Click to collapse
Thanks for the suggestion.
I will publish on Google Play as soon as i have the available funds for a Developer Registration Fee. Currency is very weak in the country now, therefore i can't spare the fee at this stage.
In the meantime: Any person that doesn't have the XDA Labs app installed, i've added a link in the OP to the app on the XDA Labs website. :good:
I will leave a message here as soon as it's on Google Play.

Would it be possible to implement something like: when the user turns off wifi manually, so the service of your apps stops and continues only when wifi is turned on by the user again.
I'm asking, because sometimes I have a bad wifi signal at my grandparents house and have to switch to mobile network so I can receive my notifications punctually instead of a 15 minutes delay. When I switch off my WiFi, your app re-activates my WiFi after some time for a scan (that's actually the purpose of your app haha) and the problem I've already said occurs.
Could you look into that?
Thanks in advance

Freezy202 said:
Would it be possible to implement something like: when the user turns off wifi manually, so the service of your apps stops and continues only when wifi is turned on by the user again.
I'm asking, because sometimes I have a bad wifi signal at my grandparents house and have to switch to mobile network so I can receive my notifications punctually instead of a 15 minutes delay. When I switch off my WiFi, your app re-activates my WiFi after some time for a scan (that's actually the purpose of your app haha) and the problem I've already said occurs.
Could you look into that?
Thanks in advance
Click to expand...
Click to collapse
@Freezy202 Haha yeah it's supposed to do that :laugh: .. I am working on some lag issues & bugs, but will see what i can implement for you to accommodate the issue..
If you can give me a few days I'll sort it out for you ..
Sent from my LG-D855 using XDA Labs

Freezy202 said:
Would it be possible to implement something like: when the user turns off wifi manually, so the service of your apps stops and continues only when wifi is turned on by the user again.
I'm asking, because sometimes I have a bad wifi signal at my grandparents house and have to switch to mobile network so I can receive my notifications punctually instead of a 15 minutes delay. When I switch off my WiFi, your app re-activates my WiFi after some time for a scan (that's actually the purpose of your app haha) and the problem I've already said occurs.
Could you look into that?
Thanks in advance
Click to expand...
Click to collapse
Pretty big update coming this week..
Sent from my LG-D855 using XDA Labs

Yeah man! . This will let me sleepless till the release haha

Freezy202 said:
Yeah man! . This will let me sleepless till the release haha
Click to expand...
Click to collapse
Haha thanks
Some features to look forward to:
- Set minimum signal strength
- Choose a time to check
- Layout improvement (decreases clutter)
- Some others...
Sent from my LG-D855 using XDA Labs

Sounds promising!

Hi everyone, sorry i had a major setback on the app.. Will publish the new version as soon as I'm ready..
Sent from my LG-D855 using XDA Labs

Good!

UPDATE: I fixed the bugs that caused the app to malfunction completely.. Update coming as soon as I'm back to decent signal on Monday (currently only have GPRS )..
Sorry, but i also have to update screenshots etc.
Sent from my LG-D855 using XDA Labs

New Update is live :victory:

Nice work man... I just try it it works like a charm on my sony m5 ... 5/5 starts... Keep up the good work .

eWeapons said:
Nice work man... I just try it it works like a charm on my sony m5 ... 5/5 starts... Keep up the good work .
Click to expand...
Click to collapse
Thanks a lot, appreciate the feedback..
Sent from my LG-D855 using XDA Labs

help after connecting status wifi is disable :crying: i'm use cm 14

Related

[REQ] BT/WiFi interval service - Will Pay

I would be willing to pay for the following app/service.
It would allow for an interval to be set from 10 minutes to 30 minutes (or whatever). During that time it does the following...
Let me explain this by just focusing on WiFi, as Bluetooth functionality would be the same functionality-wise.
At the ste interval time, the service will check the status of WiFi.
- If Off, it turns it on long enough to see if any networks autoconnect
- If network connects, then WiFi stays on as long as netowrk connection exists
- If On, it checks to see if network is connected
- If network not connected, it turns WiFi off
This way a user can save battery life by not having these services on all the time, nor shutting them on/off manually and having to remember to do it when getting in their car or office, etc..
NOTE: When the interval is hit and WiFi or BT needs to be turned on, it needs to wait a minute (or whatever time is necessary - this might be user configurable to account for differences between phones) to see if connects.
Can anyone work on such a project? I am sure you could put this in the market and have many people pay for it. It would allow for incredible battery saving and allowing for automated WiFi/BT switching.
Ceger
I'm playing around with this, I'll let you know if I come up with anything viable.
For anyone needing an application that fulfills these requirements, a beta version of the app I wrote for Ceger is now on the market:
http://www.appbrain.com/app/wireless-sentry-lite-beta/com.asd.wirelesssentry
I welcome any comments/reviews!
Scott
Sweet ill take a look at this thanks
Sent from my PC36100 using XDA App
Works great so far. I don't use the blue toothe, but the wifi part works great.
Sent from my PC36100 using XDA App

[APP] Unlock With WiFi - Automatically unlock your phone while at home

Unlock With WiFi has been reborn as SkipLock!
Unlock With WiFi is now available on the Android Market! Thanks for your feedback everyone!
Get it on the Android Market
What does the app do?
Unlock with WiFi unlocks your device when you're connected to your home WiFi network. What does "unlock" mean? It means you don't have to enter your password/pattern/PIN when you turn on your phone. When you're at home, or work, you don't need to worry about losing your phone, so why should you have to enter your password?
How does it work?
When you get home (or to work, whatever), and connect to your WiFi network, your device will unlock. Then when you leave, and the WiFi disconnects, the device will lock again.
You have to enter your password the first time after you connect to your WiFi network. This is so that if someone steals or finds your phone, they can't just bring it to your house to unlock it. After you enter your password once while connected to your WiFi network, you won't have to enter it again until you leave/disconnect.
What else does it do?
You can also set a lock delay, for when you're not at home. The default delay is set to 5 seconds, so when you turn the screen off, the device won't lock until 5 seconds have passed. That way, if you remember something you forgot to do, you can turn it back on without entering your password.
There are also options to:
Turn off WiFi when you leave home
Turn on Bluetooth when you leave home
Turn off Bluetooth when you get home
Turn on Sync when you get home
Turn off Sync when you leave home
If you have any problems with the app, please post on this thread, or PM me. Also, the app has a built in feature for reporting bugs. It will send me the system log file via email. You need to install SendLog in order for this to work, but please do so because the log file is extremely helpful to me for troubleshooting.
Please read the FAQ before posting a question or reporting a problem.
I hope you like the app, and look forward to hearing your feedback!
Known limitations:
See the FAQ for known limitations.
Versions:
There are two versions: free and full. The free version only allows you to configure one wifi network as a home network, and the extra options are disabled. Note that the free version no longer shows ads! If you like it, please buy the full version. The full version allows an unlimited number of home networks, and all the options are enabled. You can get the full version on the Android Market.
Changelog
I will no longer be maintaining the changelog here. See my website for release notes.
Cheers,
Ben
this is PERFECT.
thank you so much.
i'll report any bugs in a sec.
Holy ****
# Turn off WiFi when you leave home
AWESOME
TrueYears said:
Holy ****
# Turn off WiFi when you leave home
AWESOME
Click to expand...
Click to collapse
How about turn on wifi when you come home?
rushco said:
How about turn on wifi when you come home?
Click to expand...
Click to collapse
I've considered adding that. If there's enough requests for it, I may add it at a later date.
How's the app working for everyone?
Sent from my Captivate
Have an ATT Backflip With CyanogenMod 6.1.2 and this app is amazing, works flawlessly
thep8ntballfreak said:
Have an ATT Backflip With CyanogenMod 6.1.2 and this app is amazing, works flawlessly
Click to expand...
Click to collapse
Thanks for letting me know. I wish everyone would post a little message like this. Come on guys - 23 downloads and only one report?
Sent from my Captivate
Will test it tonight!
Nice idea, probably good app, but I can achieve all this and much much more with Tasker. Much more complex, indeed, and that is probably where your app comes into play - simple and easy.
But still, i prefer Tasker
Good Idea!
Ben74 said:
When you get home (or to work, whatever), and connect to your WiFi network, your device will unlock. Then when you leave, and the WiFi disconnects, the device will lock again.
Click to expand...
Click to collapse
Fantastic idea! If you add in the functionality found in the Y5 - Battery Saver App, it could be an all in one app:
You get home
Recognizes Cell towers
Turns on WiFi
Connects to Network
Unlocks Phone
You leave home
Leaves area of Recognized Cell towers
Turns off WiFi
Locks Phone
good concept. it does what it says...prevents your phone from locking.
but on my phone (Incredible, CM7), it's kind of annoying because you can still press the volume buttons or trackball (if setup) to wake the phone. what sucks about that is you can inadvertently turn your ringer off, or wake the screen if your fumbling around with your phone your pocket or something.
again, app works as it said it would, and does it great. just not what im looking for.
i want to just disable the passcode, not the screen lock feature.
Downloaded and testing it
i have CM7 and it works fine ... (i can disable track ball wake ) but doesn't leaving the wifi on when your home increase battery drain ? food for thought
you could also add this : ask the user to specify a place as home with gps then lock/unlock according to that . it won't be as accurate as wifi tho
Works on Droid X
This app seems to work great. Thanks so much - this is perfect for me in healthcare with security issues related to HIPAA. I hate the idea of constantly typing in my password when I know that I have my phone with me at work or at home. Great app
I second the idea to have wifi automatically turn on when I get home or work.
Great idea. I'll try it after work this afternoon.
Just installed it on a DHD. Seems to be working so far. Thanks!
Update: Not working. my phone still locks. My phone is locked by the company exchange account password.
Hey you improved my idea...
http://forum.xda-developers.com/showthread.php?t=982872
your application is very similar to mine (VERY), but some things improved I recognize it... anyhow if somebody wants to be sure of what is running inside I'm providing also the source code licensed as GPL3
I hope you don't copy-pasted portions of it or you should be licensing as GPL3 also...
Just found this - I've downloaded and I'll test tonight when I get on my wifi. I have a password lock enforced via Exchange certificate from my place of work. It'd be great if it would work with that also...
Desire, Froyo.
A question about GPS enabling. I'm a Tasker user; I've installed a GingerBread (2.3.3) ROM in my HTC Magic and now Tasker shows me a message explaining that's not possible to enable/disable GPS without user interaction in GingerBread due to Google changes in Android code. So, will be possible to make such actions with this app?
Thanks!
Will test-drive this today. Thanks!

[APP][2.1+] Wireless Minder

I recently released Wireless Minder on the Play Store and would like your feedback. The short description is that it automatically powers down unused radios and occasionally powers them up to check for a connection. A radio "up periscope" is an analogy I like to use.
There are refinements that I'm planning and surely more that I haven't thought of. It's stable and functional enough that I wanted to get it out there. Knowing me, the longer it sits around the more likely it'll get forgotten
Thanks in advance for your feedback, good or bad. I'll try to incorporate your suggestions and fix any device compatibility issues.
Play Store link : https://play.google.com/store/apps/details?id=onenosepeace.wirelessminder
Mod edit: Link that included paid apps removed.
Sounds interesting, but I'll pose this question / scenario:
Say I turn my mobile data [3/4g] off, and use minder to mind to mind mobile data, while wifi is off. If wifi is off and it does its check based on a poll count, when it sees wifi is off, is there anything that will cause it to stay connected? or rather, what's making it stay disabled in that scenario.
teh roxxorz said:
Sounds interesting, but I'll pose this question / scenario:
Say I turn my mobile data [3/4g] off, and use minder to mind to mind mobile data, while wifi is off. If wifi is off and it does its check based on a poll count, when it sees wifi is off, is there anything that will cause it to stay connected? or rather, what's making it stay disabled in that scenario.
Click to expand...
Click to collapse
The behavior now is that it will try to keep one of the data connections active. If WiFi is connected, and Mobile 3G/4G is selected, it will periodically shut off the Mobile radio. It powers it back up occasionally to check for texts, missed calls, etc.
If there is no WiFi connectivity, it will not shut off the Mobile radio even if the option is selected. Is your preference to periodically shut off the Mobile radio even if there's no WiFi? I could add that option in the Settings. I plan to add a user option to choose how long to keep the Mobile radio active.
Edit: Fixed backwards logic typo
Not to be rude but it looks like a nice app to have but it seems like you need to redesign the UI.
If you know how to code it then ill design it for you and ill send you the PSD or JPEG files so you
can intergrate it into your app. Just let me know. :good:
Neat application.
SystemErrorOne said:
Not to be rude but it looks like a nice app to have but it seems like you need to redesign the UI.
If you know how to code it then ill design it for you and ill send you the PSD or JPEG files so you
can intergrate it into your app. Just let me know. :good:
Neat application.
Click to expand...
Click to collapse
No offense taken. I have no shame over my lack of graphics arts skills I welcome artwork contributions or any other contributions.
chefp said:
The behavior now is that it will try to keep one of the data connections active. If WiFi is connected, and Mobile 3G/4G is selected, it will periodically shut off the Mobile radio. It powers it back up occasionally to check for texts, missed calls, etc.
If there is WiFi connectivity, it will not shut off the Mobile radio even if the option is selected. Is your preference to periodically shut off the Mobile radio even if there's no WiFi? I could add that option in the Settings. I plan to add a user option to choose how long to keep the Mobile radio active.
Click to expand...
Click to collapse
That would be preferable, because there are times when I have neither wifi or 3g connected. You can still get calls / text without mobile data, unless you're using a voip app, like google voice, etc.
Good app. Thanks for sharing. If you plan to release a donation version, take my advice and keep these basic features free to cater to your initial user base.
You should add features like: SSID exception lists (guest, public etc.), configurable minding intervals per module and time of day schedules when minder should scan (no need to scan for car bluetooth while sleeping).
EDIT: And automatic start at boot option.
Maybe also make some of these features part of the donate / pro version.
Cheers,
C.
teh roxxorz said:
That would be preferable, because there are times when I have neither wifi or 3g connected. You can still get calls / text without mobile data, unless you're using a voip app, like google voice, etc.
Click to expand...
Click to collapse
What you're referring to is disabling Mobile Data which still allows calls/texts to go through. That doesn't save much power since the cellular radio remains on. Wireless Minder completely turns off the cellular radio by using a modified version of Airplane Mode. It's the only switch Android provides to disable the Mobile radio. The side effect of this is of course that calls/texts will not operate when the Mobile radio is turned off.
Would you like an option to periodically check Mobile Data and disable it if there's no cellular service? Searching for service can chew through battery but I'm not sure if disabling Mobile Data will improve that. I'd need to figure out a way to offer both features without confusing people.
cheatman said:
Good app. Thanks for sharing. If you plan to release a donation version, take my advice and keep these basic features free to cater to your initial user base.
You should add features like: SSID exception lists (guest, public etc.), configurable minding intervals per module and time of day schedules when minder should scan (no need to scan for car bluetooth while sleeping).
EDIT: And automatic start at boot option.
Maybe also make some of these features part of the donate / pro version.
Click to expand...
Click to collapse
I intend to keep the base version free. I've considered releasing a paid Pro version, it depends on how much work I end up having to put into advanced features. I like your idea of having independent timers for each radio as well as a scheduler. I'll put those on the list and add them as soon as I can.
Wireless Minder does auto-start at bootup. Are you asking for a switch to disable that?
As requested, I've added separate check interval settings for WiFi, Bluetooth and Mobile. Just uploaded version 1.04 to the Play Store and it may take a few hours for the listing to be updated. Sorry this took so long. The custom picker control was a PITB.
Next on the list is a user-selectable schedule for Wireless Minder to be active.
LINK
Version 1.05 adds scheduling: choose when Wireless Minder should manage the radios. I've accounted for the corner cases that I could think of such as the start time being later than the stop time (e.g. night owls). I only have so much time to test all the different scenarios so please let me know if you see a problem.
Keep the requests coming!
Edit: I've seen odd behavior that may be related to scheduling with Mobile 3G/4G enabled on Android 4.2+ devices. On those devices, superuser is required to modify airplane mode. What seems to happen is that superuser blocks for a long time then when it releases, a bunch of queued up checking events fire rapidly in succession. It's been a tough one to nail down so if anyone sees this please report your settings and when it happens (for example, right after the schedule start time passes).
Posted 1.06 today.
version 1.06 adds option to mind mobile data: automatically disable mobile data when WiFi is connected (and automatically enable mobile data when WiFi disconnects).
Add setting option to open hidden Radio Info menu. This allows changes to the mobile radio speed 2G/3G/4G (aka EVDO/GSM, WCDMA, LTE).
Temporarily disable mobile radio control on Android 4.2+ devices due to SU blocking.
i like your idea, but i'm not willing to cut the cord and turn off the cellular radio. I usually leave wifi off anyway, i guess i could just use it for bluetooth...
beddess said:
i like your idea, but i'm not willing to cut the cord and turn off the cellular radio. I usually leave wifi off anyway, i guess i could just use it for bluetooth...
Click to expand...
Click to collapse
Yes control of the cellular radio is optional and off by default. Everyone's situation is different, just note that WiFi uses alot less power than the cellular radio. Some phones get twice as much battery runtime when on WiFi compared to only the cellular radio.
Personally I've found the Bluetooth functionality to be handy. When I hop in the car, I don't have to worry about manually turning on Bluetooth (or turning it off when I get out of the car). When a call is made or received, Bluetooth automatically turns on and it connects quickly enough to take the call.
Released version 1.07
Fix WiFi detection for mobile data control
I've seen instances where the WiFi drops but mobile data isn't automatically re-enabled. Let me know if this happens and with what type of WiFi connection (home, public, etc).
On cm10.2 nightly your app is unable to detect that my phone is rooted. But otherwise neat idea, i like this app.
Verstuurd vanaf mijn Nexus 4 met Tapatalk 4
jelle2503 said:
On cm10.2 nightly your app is unable to detect that my phone is rooted. But otherwise neat idea, i like this app.
Click to expand...
Click to collapse
Thanks
I disabled mobile radio control in version 1.06 because su was blocking with scheduling enabled. When this happens, the alarms get queued up and when su decides to unblock, they fire rapidly in succession. It's a very poor user experience. I've tried to pin down the problem but haven't found a solution yet. It's either RootTools or su itself not behaving as expected.
Hi,
i didn't know the app come from here ^_^;
Btw i left a message on playstore..
I would like to turn off gsm radio totally and keep wifi...
the app instead turn off all putting in aero mode.
Is there a way to reactivate Wifi after aero mode on? or just to power off gsm mobile radio and keeping wifi?
Chooo
Ninja_Gundam said:
Hi,
i didn't know the app come from here ^_^;
Btw i left a message on playstore..
I would like to turn off gsm radio totally and keep wifi...
the app instead turn off all putting in aero mode.
Is there a way to reactivate Wifi after aero mode on? or just to power off gsm mobile radio and keeping wifi?
Chooo
Click to expand...
Click to collapse
I just saw your message, sorry for the late response. Oddly your comment didn't show on the Play Store. Regarding the mobile radio (e.g. GSM), Google doesn't provide a standard way to control it just by itself. The only common method is through Airplane Mode. To address your concern, I've configured Airplane Mode to allow WiFi and Bluetooth to continue working. The recently released version has revamped mobile/cellular behavior. It defaults to controlling Mobile Data (leaving the radio on). If you'd like it to control the Mobile Radio, there's an option under Settings.
Hope that's explanation makes sense. If you have any more questions please feel free to post here or PM me.
Are there any more updates planned for it or not?

[Tips] Wifi Running Wakelock Battery Drain!

Having horrible battery drain with wifi running wakelock, even though the wifi is off..If you have the same problem like me, you can easily save more battery with the step below: ( don't know if it been share by anyone here )
- Settings ---> More ---> Security ----> Security Update Service
Uncheck ( Via Wi-Fi only ) Both ( Auto update security ) if you like..
Manage to get under 0.% per hour. ( wifi running remain )
Addition*
- Settings ---> More ---> Location Services
Uncheck ( Use wireless networks )
Please share any other solution if found
Thank you I will try this.
I greenified all my apps. No i see my wifi shuts off when im on deep sleep. Because when i wake my phone up it shows me that he connected to my wifi.
Sent from my GT-I9500 using Tapatalk
If you are still showing WiFi connected in battery usage, use the following steps
CONNECTIONS - WiFi
ADVANCED OPTIONS -
1. Uncheck 'Scanning Always Available'
2. Keep WiFi on....... - Check 'only when plugged in'
Enjoy longer battery life........
Sent from my Nexus 7 using xda premium
Nice fine..
Option 1, seem to remove the wifi running from bbs.
Thank you. I am now trying these settings. i turned off the security and location settings you mentioned. What exactly will happen if these are off? Will i lose any functionality?
i wonder if certain apps have the ability to turn this feature on? for some reason i just randomly started getting this terrible battery drain from wifi and google services and im thinking this is the cause and i have not done any updates lately... hmmmm
yamaha83 said:
i wonder if certain apps have the ability to turn this feature on? for some reason i just randomly started getting this terrible battery drain from wifi and google services and im thinking this is the cause and i have not done any updates lately... hmmmm
Click to expand...
Click to collapse
Take a look here and my last posts: http://forum.xda-developers.com/showthread.php?t=2684295
Enviado desde mi GT-P7510 usando Tapatalk 2
Wakelock of Google services
Hi all,
I've been fighting with this issue for a while on my I9502 and just recently came to a solution. I use wakelock detector, and it was showing pretty much 95% of the time the phone was awake. I did the Wifi auto scan off thingy, and a few others which did help, but what ultimately helped me with the "google services" caused wakelock was:
Google Play Store -> settings ->
Notifications OFF
Auto update apps OFF
Require password for purchases ALWAYS
My Wifi is still on and running, exchange account (push) and gmail syncing, location services on both wifi and gps. And the phone is in deep sleep when I turn off the screen. Mind you, I have only the following apps on the main screen: Weather Pro, Smooth calendar at the moment. I will try what happens if I put back google now.
I hope it helps some of you.
Off you Wifi when not in use. We tend to forget these things which is why the battery's charge goes down.
use wlan guest mode if ur router supports it and connect only ur phones/tablets in it.
my router does not support it but i bought a second router for 15 euros which is behind my old router now.
like this i almost loose no battery at all over night.
this wlan_rx_wake crap was driving me crazy since i got my first s2 3 years ago. since i got this new router everything is perfect.
if u want to know which router it is please let me know i will post it then
thanks mate you saved my day !!!! i installed greenifiy and i hibernate most of my appsand games expect facebook and telegram, messanger, whatsapp, line , app lock , vault , titanum backup, trickster mod , freedom, device manager, wifikey viewer
any notice you could tell me about my current configuration
chrisknife said:
use wlan guest mode if ur router supports it and connect only ur phones/tablets in it.
my router does not support it but i bought a second router for 15 euros which is behind my old router now.
like this i almost loose no battery at all over night.
this wlan_rx_wake crap was driving me crazy since i got my first s2 3 years ago. since i got this new router everything is perfect.
if u want to know which router it is please let me know i will post it then
Click to expand...
Click to collapse
What is wlan guest mode and how does it help with the wifi connection?
Sent from my GT-I9505 using Tapatalk
---------- Post added at 02:21 PM ---------- Previous post was at 02:17 PM ----------
Quite a handy app, turns off wifi/data when your screen is off, but can be set to periodically switch on and sync. Can also set it not to connect when u just switch your screen on (to check the time say).
https://play.google.com/store/apps/details?id=com.teqtic.leandata
Sent from my GT-I9505 using Tapatalk
gsmyth said:
What is wlan guest mode and how does it help with the wifi connection?
Click to expand...
Click to collapse
wlan guest mode an option some routers have. u can enable it and will have a second wlan network online.
it's not connected to the other network so everyone who will use this network is exlcuded from the primary home network.
mostly it's meant for guests so they can do what they want and u don't have to be scared that ur network will get infected with some sh*t.
but in this case u can use it to exclude ur phone from ur primary network and give it his own network.
on ur pc check ur network traffic with wireshark.
u will get so many arp, ipv6 and multicast traffic... android mostly isn't capable to handle it.
atleast it seems that way because all of this will trigger wlan_rx_wake.
it's even worse when u got a network printer and a samsung smart tv (arp requests like every second)
chrisknife said:
wlan guest mode an option some routers have. u can enable it and will have a second wlan network online.
it's not connected to the other network so everyone who will use this network is exlcuded from the primary home network.
mostly it's meant for guests so they can do what they won't and u don't have to be scared that ur network will get infected with some sh*t.
but in this case u can use it to exclude ur phone from ur primary network and give it his own network.
on ur pc check ur network traffic with wireshark.
u will get so many arp, ipv6 and multicast traffic... android mostly isn't capable to handle it.
atleast it seems that way because all of this will trigger wlan_rx_wake.
it's even worse when u got a network printer and a samsung smart tv (arp requests like every second)
Click to expand...
Click to collapse
Thanks for the explanation, I have checked and my router does have a guest network mode, will set this up and give it a try to see how it goes. As I am connected constantly to Wifi when at home and also at work. I can do a good comparison as I have exactly the same router at work as at home, but I can try out the guest network at home to see what the wakelocks are like.

[APP][TEQTIC][4.1+] LeanDroid - ? Most advanced battery saver

Introducing LeanDroid:
LeanDroid is a lightweight and incredibly powerful battery saver. It automatically manages the power-hungry radios on your device while the screen is off to significantly lengthen battery life.
Get the most out of your device with the most advanced and efficient battery saver! The no-frills battery saver that actually works!
Features:
-Automatically disables Wi-Fi
-Automatically disables cellular data (root only on Lollipop+)
-Automatically disables cellular radio (root only on Lollipop+)
-Automatically disables Bluetooth
-Automatically disables network location (KitKat+, root only on Lollipop+)
-Automatically disables GPS location (KitKat+, root only on Lollipop+)
-Automatically switches cellular network mode (Lollipop+ and with root)
-Periodically restores connections for sync
-Schedule when LD should be active with the time exception
-Set exceptions for when certain apps are running
-Set exceptions by Wi-Fi name
-Set exceptions by Bluetooth device
-Set exceptions by data transfer speed
-Many more options
-No ads
It can disable WiFi, Cellular Data (2G, 3G, LTE)*, Cellular radio*, Bluetooth, and Location* (networks and GPS) after a certain time with the screen off to conserve battery power and lower data usage. Connections are restored when the screen is turned back on or unlocked, as well as periodically, to allow for notifications to come in. LD will only re-enable connections that it disabled, not all of the selected connections. There are many additional options to set to your preference.
If you have an issue, please email [email protected], or use the contact menu option from the app before leaving a negative review!
Some options explained:
Disable Wi-Fi/Data/Network mode except if active - Connections are only disabled if there is negligible data transfer while the screen is off. Some music services don't "stream" but instead download entire songs at once, and they might do this while the screen is still on. Please set the disable time interval to at least the length of your average song so LD can catch data activity while the screen is off or use the except if "Except if apps running" option.
Disable Wi-Fi except if browser has web login - WiFi is not disabled if it requires a browser login (common for public hotspots or guest networks), so that you do not have to re-enter the password when it is re-enabled.
Disable Wi-Fi except if requires browser login - WiFi is not disabled if it requires a browser login (common for public hotspots or guest networks), so that you do not have to re-enter the password when it is re-enabled.
Disable except if apps running - No connections are disabled if one of the selected apps is found to be running in the foreground or has foreground services. There is a sub-option to also detect background services of the apps.
Restore Data after waiting xx seconds for Wi-Fi to connect - Wait for WiFi to connect before re-enabling cellular data. This prevents data from re-connecting for just a couple of seconds.
Tasker intents
com.teqtic.leandata.INTENT_START_SERVICE
com.teqtic.leandata.INTENT_STOP_SERVICE
* Note:
-Not all options are available on all devices.
-If you are on Android 4.4.1 - 4.4.2, a persistent notification is required due to a bug in KitKat where services cannot restart themselves once killed by the system. If you would like to hide the notification, find LeanDroid in Settings -> Apps, and un-check "show notifications".
Follow us on twitter: @teqTic
To join the Beta tester group:
1) Opt-in here: https://play.google.com/apps/testing/com.teqtic.leandata
2) You will then receive the beta updates directly through the Play store.
Please keep in mind these beta versions will often have bugs!
Download:
Im gonna try this, have used smart radio function but felt it was draining battery a lot. Will keep you posted after trying this
phanitej said:
Im gonna try this, have used smart radio function but felt it was draining battery a lot. Will keep you posted after trying this
Click to expand...
Click to collapse
Thank you sir. Please let me know how well it works for you.
Flyview said:
Thank you sir. Please let me know how well it works for you.
Click to expand...
Click to collapse
Nice work. It works as it is supposed to. Is there any way i can check using terminal(or anything else) how long the radios are turned off or on?
phanitej said:
Nice work. It works as it is supposed to. Is there any way i can check using terminal(or anything else) how long the radios are turned off or on?
Click to expand...
Click to collapse
You mean so that you can tell how long they were turned off for? Good question, there's gotta be some app that can pull up those statistics. For WiFi, you can check your battery usage chart.
Thanks for the feedback, rate it on Google Play if you get a chance. Bugs, suggestions and feature requests are welcome!
Flyview said:
You mean so that you can tell how long they were turned off for? Good question, there's gotta be some app that can pull up those statistics. For WiFi, you can check your battery usage chart.
Thanks for the feedback, rate it on Google Play if you get a chance. Bugs, suggestions and feature requests are welcome!
Click to expand...
Click to collapse
Suggestions:
1. When im playing few multiplayer games like Heroes of Order and Chaos etc, i usually tend to leave my phone aside for one or two min, so with my current setup where the radios are turned off after one min, the internet might get disconnected hence me loosing the game. So if there is a feature which can check if there is data transfer then dont turn off the radios. Same goes with me downloading some files and the radios might turn off causing the download to fail. - I guess it is answered in the description, my mistake
2. Where it says turn on radios to sync/receive after a specific time period, is thee way to only switch on the 2g network to save more juice?
Questions:
1. When the radios are turned on after the specific time period to sync, do all the radios get turned on?
2. Does it already check if there is data transfer and then turn off the radios ?
Edit: Rated the app on Play Store
phanitej said:
Suggestions:
1. When im playing few multiplayer games like Heroes of Order and Chaos etc, i usually tend to leave my phone aside for one or two min, so with my current setup where the radios are turned off after one min, the internet might get disconnected hence me loosing the game. So if there is a feature which can check if there is data transfer then dont turn off the radios. Same goes with me downloading some files and the radios might turn off causing the download to fail.
2. Where it says turn on radios to sync/receive after a specific time period, is thee way to only switch on the 2g network to save more juice?
Questions:
1. When the radios are turned on after the specific time period to sync, do all the radios get turned on?
2. Does it already check if there is data transfer and then turn off the radios ?
Edit: Rated the app on Play Store
Click to expand...
Click to collapse
Suggestion responses:
1. While the screen is on, the connections are never turned off. The time "after" is time after screen off (explained in help dialog or on Play Store).
2) No, there is currently no option to do that. I wouldn't recommend it either. 2G/Edge is so slow it wouldn't even be able to connect and do anything in the brief time it has to sync.
Question responses:
1. Nope, only the connections that were turned off by the app. I will update the app description to make this more clear.
2. Yes I believe right now it is set to a threshold of about 2kB/s. If within the period that it checks, the data transfer is more than this, it will not disable WiFi/data.
Flyview said:
Suggestion responses:
1. While the screen is on, the connections are never turned off. The time "after" is time after screen off (explained in help dialog or on Play Store).
2) No, there is currently no option to do that. I wouldn't recommend it either. 2G/Edge is so slow it wouldn't even be able to connect and do anything in the brief time it has to sync.
Question responses:
1. Nope, only the connections that were turned off by the app. I will update the app description to make this more clear.
2. Yes I believe right now it is set to a threshold of about 2kB/s. If within the period that it checks, the data transfer is more than this, it will not disable WiFi/data.
Click to expand...
Click to collapse
One request, can we have an option to not turn off the radios if connected to charger?
can you add an option for tethering?
phanitej said:
One request, can we have an option to not turn off the radios if connected to charger?
Click to expand...
Click to collapse
Already does that.
Sent from my Nexus 5 using Tapatalk
cottino said:
can you add an option for tethering?
Click to expand...
Click to collapse
Explain? Most phones can already tether stock.
Sent from my Nexus 5 using Tapatalk
Flyview said:
Already does that.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Thats strange, i noticed yesterday when my phone was connected to the charger it turned off radios. Maybe something to do with my new ROM that i flashed. Will check it today in the night. Thanks for your response
Yes, but LeandData stop traffic also if tethering is on. In this case every time you have to switch on 3g again and reconnect your notebook.
phanitej said:
Thats strange, i noticed yesterday when my phone was connected to the charger it turned off radios. Maybe something to do with my new ROM that i flashed. Will check it today in the night. Thanks for your response
Click to expand...
Click to collapse
Yes, please check for me as this could potentially be a bug. What did it turn off? It should not turn anything off if the device is charging. Also, if you connect a charger after the app has already turned off connections, it should turn them back on. Please ensure you haven't left any other similar apps running. The WiFi turning off with the screen off could also be a system option.
If you do indeed find a problem please let me know what Android version you are running. You can also check the Logcat if you filter for LeanData. Tell me what you see around the time of the problem.
cottino said:
Yes, but LeandData stop traffic also if tethering is on. In this case every time you have to switch on 3g again and reconnect your notebook.
Click to expand...
Click to collapse
I see. How are you tethering? USB or Bluetooth? If you are tethering through USB the device should be considered charging in which case it should not turn off the connections anyway. I will look into Bluetooth tethering.
Thanks for the feedback.
Flyview said:
Yes, please check for me as this could potentially be a bug. What did it turn off? It should not turn anything off if the device is charging. Also, if you connect a charger after the app has already turned off connections, it should turn them back on. Please ensure you haven't left any other similar apps running. The WiFi turning off with the screen off could also be a system option.
If you do indeed find a problem please let me know what Android version you are running. You can also check the Logcat if you filter for LeanData. Tell me what you see around the time of the problem.
I see. How are you tethering? USB or Bluetooth? If you are tethering through USB the device should be considered charging in which case it should not turn off the connections anyway. I will look into Bluetooth tethering.
Thanks for the feedback.
Click to expand...
Click to collapse
I tethering through Wifi but with my settings the problem is network data:
Flyview said:
Yes, please check for me as this could potentially be a bug. What did it turn off? It should not turn anything off if the device is charging. Also, if you connect a charger after the app has already turned off connections, it should turn them back on. Please ensure you haven't left any other similar apps running. The WiFi turning off with the screen off could also be a system option.
If you do indeed find a problem please let me know what Android version you are running. You can also check the Logcat if you filter for LeanData. Tell me what you see around the time of the problem.
Thanks for the feedback.
Click to expand...
Click to collapse
As expected, i cleaned up everything on my device and flashed a new build. Installed LeanData and used the same settings, all working fine. Radios get turned on when plugged into the charger. Thanks for your time, quick response and efforts
To be honest, i have used many similar apps and never got this almost perfect feeling for any app
Wish i could donate, but running on low budget due to my job. Will donate once things settle down at my end.
cottino said:
I tethering through Wifi but with my settings the problem is network data:
Click to expand...
Click to collapse
I see! I forgot about WiFI tethering, derp. I will add in some logic to not disable connections if tethering as soon as I can. Keep your eyes peeled for an update. Thanks.
phanitej said:
As expected, i cleaned up everything on my device and flashed a new build. Installed LeanData and used the same settings, all working fine. Radios get turned on when plugged into the charger. Thanks for your time, quick response and efforts
To be honest, i have used many similar apps and never got this almost perfect feeling for any app
Wish i could donate, but running on low budget due to my job. Will donate once things settle down at my end.
Click to expand...
Click to collapse
Awesome, keep an eye on it. Thanks for the kind words!
MIUI rom have a application to monitor intenet connect of all application. it's great and I cannot find other app can do like this on Playstore. Bcs many app ask permission connect network althought they are no need to run. But I guest they need permission connect network to sending some information silently.
Different from Sony Stamina mode?
Hi.
I have an xperia device and i would like to know if this app is different from sony's stamina mode, which also switches off connections in idle mode.
Thanks.
GPS might also be a worthy addition!
Only the paid version of dsbatterysaver includes GPS. Right now, I have tasker turn it on and off with the screen when unplugged but that means no syncing of location using GPS.

Categories

Resources