N8000 insane bug - Galaxy Note 10.1 Q&A, Help & Troubleshooting

Well, where do I start...
This is insane. lol
First I created this thread: http://forum.xda-developers.com/galaxy-note-10-1/help/battery-crazy-t3443724
So, after flashing CM13 again my battery went normal and all was perfect. It was 11pm, I set my alarm to 9am and went to bed.
I wake up the next morning without my alarm wondering why didn't it go off so I check the time and it seemed my tablet went off sometime during my sleep. Ok, no problem. I turn it on and after 6 or 7 minutes I start fearing I might be on a bootloop. I have my breakfast and come back. Yep, bootloop. I reboot it and bootloop again.
Time for TWRP. I go to Wipe -> Advanced Wipe -> Dalvik Cache and Cache and swipe to wipe.
"eek:" = O
For some reason all my Os are replaced with "eek:" whenever I save changes on the thread.
Code:
[COLOR="Red"]E:Mount: Unable to find partition for path '/sdcard'
E:Unmount: Unable to find partition for path '/sdcard'
E:Mount: Unable to find partition for path '/sdcard'[/COLOR]
Updating partition details...
[COLOR="red"]E:Unable to stat 'data/media'[/COLOR]
...done
Full SELinux support is present
[COLOR="red"]E:TWFunc::Copy_Log -- Can't open destination log file: '/cache/recovery/log'
E:DataManager::eek:utput_Version -- Unable to make /cache/recovery[/COLOR]
MTP Enabled
Wiping Dalvik Cache Directories...
Cleaned: /data/dalvik-cache...
-- Dalvik Cache Directories Wipe Complete!
Formatting Cache using make_ext4fs function.
[COLOR="red"]E:DataManager:eek:utput_Version -- Unable to make /cache/recovery[/COLOR]
Updating partition details...
[COLOR="red"]E:Unable to stat '/data/media'[/COLOR]
...done
I tried a whole bunch of different things, flashing a rom again, flahsing stock rom, flashing stock through Odin...
Code:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1101)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/009> Removed!!
Nothing on the internet works, I tried ADB but they ALL get stuck into E:Unable to stat '/data/media'. I've been working on it for the whole day and NO progress has been made. There's nothing about specifically it on the internet, there are some similar errors with unapplicable solutions.
Anybody? I need this tablet sooo much, I don't have cell phone, laptop or anything, I just have this tablet.
I'd be so thankful if anybody could help.

In recovery format data system cache .
Download stock rom and install .
Same error message you need a new motherboard .

Dang... I´m ultra screwed then. Thanks for the support. All as I suspected unfortunately.

Related

I think I goofed! help please

ok so I was getting very short on available space so i went in and started deleting things (my fault I know). I have been on 4.2.2 so all my files were in "0". I figured since they were all in that file and I had everything doubled in that file, i started deleting everything in my other file and just kept everything that was in "0". Went to flash a new Rom and all my files were now gone. I deleted all my backups in that file also (I'm kicking myself right now).
So now I'm stuck in Recovery with nothing i can do. What can I do now??
Maybe try to odin
Sent from my SCH-I535 using xda premium
OK, so I flashed the unroot files through Odin. Went through successfully, but now I'm stuck on the stock splash screen. Any ideas? some reason when i try to get into recovery, it just vibrates.
Give me the link to the odin file you flashed. I'm curious why it was an unroot flash. When you boot into recovery, You can copy a new ROM file into your sdcard and flash a new ROM via ADB.
I'm starting to freak out a little bit here. I'm in odin trying to flash it back to stock and I'm not having any luck here. Someone got some time to help?
I can now flash into recovery but my up and down buttons dont work, so the only option I have at that point is to reboot, which then send me into the splash.
sjpritch25 said:
Give me the link to the odin file you flashed. I'm curious why it was an unroot flash. When you boot into recovery, You can copy a new ROM file into your sdcard and flash a new ROM via ADB.
Click to expand...
Click to collapse
This is what I'm trying to do right now. passed the first step, but the second isn't getting a pass.
this is what I'm getting on the second flash in odin:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I535VRALF2_618049_REV09_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
I dont geta pass above though. its just empty.
Does that just mean that I'm not giving it enough time to process?
SOB!!!! Anyone out there that can help me here??
Holy hell. It booted up. That could have been the most stressful 2 hours of my life.

Bricked N8000 need some HELP

Help me please..
My note died yesterday, started hanging while i was listening to music.
Tried to reset my note but now its stuck on Samsung Galaxy note 10.1 logo.
I'm using Omega Rom http://forum.xda-developers.com/showthread.php?t=2131474 for about 2 months with no problem encoutered until this one.
Can't access Recovery mode (just shows black screen but when i press the screen the device vibrates) - using Philz advance recovery
I can only access Download Mode, custom binary download: Yes (2 counts) and current binary/system status: both Custom
I tried flashing stock rom but failed
<ID:0/040> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N8000DXUCMB1_N8000OLBCMB1_795498_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/040> Odin v.3 engine (ID:40)..
<ID:0/040> File analysis..
<ID:0/040> SetupConnection..
<ID:0/040> Initialzation..
<ID:0/040> Get PIT for mapping..
<ID:0/040>
<ID:0/040> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried Flashing some n8000 note 10 pit files I've found searching on google but with no luck, saying that Re-partition operation failed.
Sorry if my english is bad, i am just desperate to fix my note T.T
F***** up partition information table .
You need a service centre repair but as you have no warranty it may be worth you trying to repair . See PIT info thread in development .
http://forum.xda-developers.com/showthread.php?t=2363703
I've tried the pit files for n8000 in the link you gave, still operation failed.
I guess i need to download stock ics rom in sammobile first as I only have stock jb available.
tnx btw
Did it Work?
So it's the same case for me too,
I was using Omega ROM. It was very good actually but one day it went to the boot screen and ceased there.
So I got the .pit files as mentioned above.
As you flashed 4.0.4 with the above pit file, did it work?
help me
hi friends & master
please help me
excuse me for question
I did not know what questions to ask
Is there any way to transfer games and apps to the internal storage with app2sd (moving apps & games in from system Rom to SD card(internal) no memory card)?
my system rom There is almost full
1.44 GB (148 MB free)
internal 12.6 GB (5.8 GB free)
SD card 12.5 GB (5.6 GB free)
I do not need to memory card
hi again
why long press and holding any app in menu not move in to info or recycle bin(for deleted) ?
this for all or me?
Unfortunately, flashing ICS stock or JB stock roms + pit file didnt work.
Tried different Odin versions to no luck.
Guess I need to send my note to samsung service center
So it's the same case for me too,

E:Can't mount /dev/block/mmcblk0p1

Has anyone figured out how to repair this error yet??? i've spent 4 days reading forums and google and whatnot and still i cant get this problem fixed. either solutions are for i9000 and not for infuse so procedures and roms are different. those who have infuse have not solved this error so i have no steps to follow. i've flashed like 7 different roms (some stock some modded) and nothing! i'm at my wits end i've been on and off on fixing this phone since 2013..... and anyone help me figure this out?? i'll answer all questions asap!
marielacvn said:
Has anyone figured out how to repair this error yet??? i've spent 4 days reading forums and google and whatnot and still i cant get this problem fixed. either solutions are for i9000 and not for infuse so procedures and roms are different. those who have infuse have not solved this error so i have no steps to follow. i've flashed like 7 different roms (some stock some modded) and nothing! i'm at my wits end i've been on and off on fixing this phone since 2013..... and anyone help me figure this out?? i'll answer all questions asap!
Click to expand...
Click to collapse
What's the consequence of this error? What are you doing when this error comes up? Any other messages?
I remember this one popping up before while flashing and it not meaning anything. Everything flashed fine. Mind you, this may have been with my primary phone, I cannot remember.
This Infuse thread may be of some help (or not, let me know):
http://forum.xda-developers.com/showthread.php?t=1581977
joel.maxuel said:
What's the consequence of this error? What are you doing when this error comes up? Any other messages?
I remember this one popping up before while flashing and it not meaning anything. Everything flashed fine. Mind you, this may have been with my primary phone, I cannot remember.
This Infuse thread may be of some help (or not, let me know):
http://forum.xda-developers.com/showthread.php?t=1581977
Click to expand...
Click to collapse
Consequence of the error is odd... I plugged my phone one night and left it charging in the morning the phone was off... When I wanted to turn it back on I got this error. This is not the only error.... I get another one E:copy_dbdata_media:Can't mount SDCARD
As for the link I've read that thread over and over and it was of no help because I did everything he did and still no results
marielacvn said:
Consequence of the error is odd... I plugged my phone one night and left it charging in the morning the phone was off... When I wanted to turn it back on I got this error. This is not the only error.... I get another one E:copy_dbdata_media:Can't mount SDCARD
As for the link I've read that thread over and over and it was of no help because I did everything he did and still no results
Click to expand...
Click to collapse
Sounds like a hardware error. Are you able to go into download mode? How about recovery? Do you have CWM, TWRP, or stock recovery? If you have the first two are you able to make and restore backups, and otherwise access the SD cards?
Finally, are you running stock, or a custom ROM? I see you mentioned earlier that you switched ROM's so even if it's happening with stock, then it's becoming less of a software issue in my thoughts. But if you have full access in recovery, then that would squash those thoughts. At that point, I would try to find a working ROM.
joel.maxuel said:
Sounds like a hardware error. Are you able to go into download mode? How about recovery? Do you have CWM, TWRP, or stock recovery? If you have the first two are you able to make and restore backups, and otherwise access the SD cards?
Finally, are you running stock, or a custom ROM? I see you mentioned earlier that you switched ROM's so even if it's happening with stock, then it's becoming less of a software issue in my thoughts. But if you have full access in recovery, then that would squash those thoughts. At that point, I would try to find a working ROM.
Click to expand...
Click to collapse
Yes I can go into Download mode and I'm able to flash successfully it just won't reboot afterwards.... It gives me the errors. The only recovery I can go into is the stock Android blue text menu. My phone is rooted and before this error I had cwm... After the error and trying to flash and recover I can't access cwm. I've tried gtgs unbrick stock rom, entopy's kernel, a couple of modded roms like aeon or legend and nothing I get the same results... Same error. But all flash successfully. Right now I'm in stock GB rom
marielacvn said:
Yes I can go into Download mode and I'm able to flash successfully it just won't reboot afterwards.... It gives me the errors. The only recovery I can go into is the stock Android blue text menu. My phone is rooted and before this error I had cwm... After the error and trying to flash and recover I can't access cwm. I've tried gtgs unbrick stock rom, entopy's kernel, a couple of modded roms like aeon or legend and nothing I get the same results... Same error. But all flash successfully. Right now I'm in stock GB rom
Click to expand...
Click to collapse
If you don't have ClockWorkMod I am assuming you are flashing all your ROMs through download mode. I thought that only stock ROMs were available for that. I learn something new everyday.
Anyways, it may be that Download mode is silently getting the write error when it comes to that partition. Did you try putting CWM back on?:
http://forum.xda-developers.com/showthread.php?t=1107881
I am really curious if you can access your (internal) SD card outside the boot process. If the partition table is shot, there is a process that repartitions everything, which in theory gets everything back to normal. It involved Odin, but I forget what the file was called. Pretty sure it was CWM itself, but I'm not sure (first reboot after installed whatever through Odin, I remember a voice alerting me to please wait while partitions are updated - about 5 minutes). I will have to look it up when I get home.
joel.maxuel said:
If you don't have ClockWorkMod I am assuming you are flashing all your ROMs through download mode. I thought that only stock ROMs were available for that. I learn something new everyday.
Anyways, it may be that Download mode is silently getting the write error when it comes to that partition. Did you try putting CWM back on?:
http://forum.xda-developers.com/showthread.php?t=1107881
I am really curious if you can access your (internal) SD card outside the boot process. If the partition table is shot, there is a process that repartitions everything, which in theory gets everything back to normal. It involved Odin, but I forget what the file was called. Pretty sure it was CWM itself, but I'm not sure (first reboot after installed whatever through Odin, I remember a voice alerting me to please wait while partitions are updated - about 5 minutes). I will have to look it up when I get home.
Click to expand...
Click to collapse
i tried putting cwm in by itself and it stays in starting connection indefinitely....this is when i just put a /tar file in odin under PDA. if i put the whole rom in with pit included and pda and phone files it's successful. this is the report i get after installing a rom with cwm included:
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I997UCLB3-CWM-root-deodex-extras.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I997UCLB3-CWM-root-deodex-extras.tar.md5 is valid.
<OSM> PHONE_UCLB3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.rfs
<ID:0/004> NAND Write Start!!
<ID:0/004> factoryfs.rfs
<ID:0/004> modem.bin
<ID:0/004> zImage
<ID:0/004> modem.bin
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response form LOKE
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
after my phone reboots i get this message in the screen:
---installing package...
finding update package...
opening update package...
verifying update package...
installing update...\
successfully installed package.
---copying media files----
E: failed to mount/dbdata (file exists)
E:copy_dbdata_media: Can't mount/db data your storage not prepared yet, please use UI menu for format and reboot actions.
media files copy failed.
--wiping cache...
formatting/cache...\
cache wipe failed.
----appling multi-csc...
installing multi-csc
applied the csc-code 'att'
successfully applied multi-csc.
from here i proceed to wipe data/factory reset from the menu.
----wiping data...
formatting/data...
formatting/dbdata...
E: format_volume: rfs format failed on /dev/block/stl10
Deleting meta data
formatting /cache...
data wipe complete.
if i try anything else i get
E:failed to mount/sdcard (file exists)
that's pretty much where i'm at right now....... it seems i have little to no communication with the internal sd card.
marielacvn said:
that's pretty much where i'm at right now....... it seems i have little to no communication with the internal sd card.
Click to expand...
Click to collapse
That's what it's looking like. Your cache partition looks fine, so must be your root partition (or whatever holds kernel and core bootstrap). If it was a desktop computer I would say either the partition table is bunged up or the tail end of the hard drive is inaccessible. I am stumped on how to get to the former. I will look at home for the Odin CWM file I had so you don't have to flash a whole ROM. It may just sit still forever like the CWM install you have (or it may not work at all because mine may be designed for i997R - Rogers kernel), but it's worth a try, since it's the only thing I can think of.
joel.maxuel said:
That's what it's looking like. Your cache partition looks fine, so must be your root partition (or whatever holds kernel and core bootstrap). If it was a desktop computer I would say either the partition table is bunged up or the tail end of the hard drive is inaccessible. I am stumped on how to get to the former. I will look at home for the Odin CWM file I had so you don't have to flash a whole ROM. It may just sit still forever like the CWM install you have (or it may not work at all because mine may be designed for i997R - Rogers kernel), but it's worth a try, since it's the only thing I can think of.
Click to expand...
Click to collapse
I'll pretty much try anything at this point.... Haven't used the phone in almost a year so I'll practically try anything. Kind of a bummer no solution still exists for this.... I'm thinking it might just be a hardware thing either way I'm standing by...
marielacvn said:
I'll pretty much try anything at this point.... Haven't used the phone in almost a year so I'll practically try anything. Kind of a bummer no solution still exists for this.... I'm thinking it might just be a hardware thing either way I'm standing by...
Click to expand...
Click to collapse
This is what I was thinking of:
http://forum.xda-developers.com/showthread.php?t=1197248
You are probably with AT&T so this would be a bad idea. It won't brick your phone, but weirdness occours like soft reboots. So with that in mind, try this link:
http://forum.xda-developers.com/showthread.php?t=1698367
...and download Entropy512's CWM red. If this doesn't load, I don't know where to go next.
joel.maxuel said:
This is what I was thinking of:
http://forum.xda-developers.com/showthread.php?t=1197248
You are probably with AT&T so this would be a bad idea. It won't brick your phone, but weirdness occours like soft reboots. So with that in mind, try this link:
http://forum.xda-developers.com/showthread.php?t=1698367
...and download Entropy512's CWM red. If this doesn't load, I don't know where to go next.
Click to expand...
Click to collapse
first link:
i downloaded Entropy512's Daily Driver / Red CWM Recovery, flashed it and this was the summary i got from odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> 2012.04.05-ODIN-Entropy_DD-GB-zImage.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> zImage
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
<ID:0/005> Added!!
after reboot i get this error
E:failed to mount /dbdata (invalid argument)
----copying media files...
E:failed to mount /dbdata (file exists)
E:copy_dbdata_media:can't mount /dbdata your storage not prepared yet, please use UI menu for format and reboot actions.
media files copy failed.
i also tried the same for Zen Arcade's Infusion-Z / Red CWM Recovery
2012.05.20-ODIN-Infusion-GB-Zen-CoreA-16.rar
2012.05.20-ODIN-Infusion-GB-Zen-CoreB-14.rar
same results....
as for link 2 and rooting with rogers my results were.....
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> PDA_UXKG3_rooted_no_bootloaders_v2.tar.md5 is invalid.
<OSM> End...
it was a no go.....
Try the Infused Gingerbread kernel one, after putting an AT&T stock rom back on. Guess I should have been more specific, if you were to try the Rogers route. Think it will have the same issue, but the above file is the one I used for CWM.
Sent from my MyTouch 4G Slide using XDA Free mobile app
joel.maxuel said:
Try the Infused Gingerbread kernel one, after putting an AT&T stock rom back on. Guess I should have been more specific, if you were to try the Rogers route. Think it will have the same issue, but the above file is the one I used for CWM.
Sent from my MyTouch 4G Slide using XDA Free mobile app
Click to expand...
Click to collapse
Just did it...same result....i think i'm throwing the towel in.... maybe a year from now i'll come back to it and see if anything has changed... j/k but really i think we gave it a real go. i'm always open to more ideas but for now i think its possibly fried inside... thanks for all the help though!!
No problem. Best of luck!
Sent from my MyTouch 4G Slide using XDA Free mobile app
a bit late on the reply but you might want to use the unbrick / Return to stock method in http://forum.xda-developers.com/showthread.php?t=1705260. I had this issue too trying to install new rom. This should at least get you passed the error onto working phone if it's not hardware malfunction. From there you can install cwm and do whatever. Hope this help.
if your infuse is the AT&T one you can try this as well http://forum.xda-developers.com/showthread.php?t=1524081
Young_Azul said:
if your infuse is the AT&T one you can try this as well http://forum.xda-developers.com/showthread.php?t=1524081
Click to expand...
Click to collapse
I never tried the one click version of it before.. but the normal Heimdall was a bit confusing for me compare to Odin. If I had not use Odin before Heimdall then maybe I would have gotten used to it..
scmfxt said:
I never tried the one click version of it before.. but the normal Heimdall was a bit confusing for me compare to Odin. If I had not use Odin before Heimdall then maybe I would have gotten used to it..
Click to expand...
Click to collapse
normal Heimdall is confusing but the one click isn't confusing if you read what's on the OP but that sad this is that it doesn't have root :/ and what i have noticed is when odin doesn't want to recognize your phone heimdall will....and just to get root and recovery i flashed twice with heimdall second time for the boot loaders...then i flashed through odin for the root with recovery version
marielacvn said:
after my phone reboots i get this message in the screen:
---installing package...
finding update package...
opening update package...
verifying update package...
installing update...\
successfully installed package.
---copying media files----
E: failed to mount/dbdata (file exists)
E:copy_dbdata_media: Can't mount/db data your storage not prepared yet, please use UI menu for format and reboot actions.
media files copy failed.
--wiping cache...
formatting/cache...\
cache wipe failed.
----appling multi-csc...
installing multi-csc
applied the csc-code 'att'
successfully applied multi-csc.
Click to expand...
Click to collapse
I remember fixing this problem by flashing (Odin) a "dbdata.rfs.tar" file from one of these forums. It was long ago so I don't quite remember where it was and what exactly my steps were. As far as my memory goes, I flashed I997UCLB3 via odin and then flashed "dbdata.rfs.tar". That fixed this problem. I will attach the "dbdata.rfs.tar" file on this post, hope you find a solutions :S. Sorry if you have already tried it >.<
driverless said:
I remember fixing this problem by flashing (Odin) a "dbdata.rfs.tar" file from one of these forums. It was long ago so I don't quite remember where it was and what exactly my steps were. As far as my memory goes, I flashed I997UCLB3 via odin and then flashed "dbdata.rfs.tar". That fixed this problem. I will attach the "dbdata.rfs.tar" file on this post, hope you find a solutions :S. Sorry if you have already tried it >.<
Click to expand...
Click to collapse
i've tried it already by decided what the hell i'll give it one last try again.....still nothing i'm now convinced that this is a hardware problem and not software. thanks again for the comment!
Cheers

Help: My SM-G920F strange display and no flashing after root,

hi
hi,
phone came to me with 5.1.1 latest build of EE-UK
G920FXXU3QOJF_G920FEVR3QOJF_EVR
I root with
S6_UniKernel_v8-0001-ODIN
now download mode give strange issue here are pics
http://www.4shared.com/download/IOp...6ae669f7568a293d60885275688d80d795f&lgfp=3000
http://www.4shared.com/download/E9y...a9b8785cf4e8f45a6d864fc174d5cca195f&lgfp=3000
flashing is also giving error in odin3 v3.10
here are logs of flashing
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU3QOJF_G920FEVR3QOJF_G920FXXU3COJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin engine v(ID:3.1005)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> sboot.bin
<ID:0/010> NAND Write Start!!
<ID:0/010> cm.bin
<ID:0/010> boot.img
<ID:0/010> recovery.img
<ID:0/010> system.img
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I also try to recover with smart switch emergency recovery but failed, it gives me no emergency code
please suggest me as early possible, phone is brand new and just unbox it,
is it some kernel issue with new build ?
urgent help will be highly appreciated,
thanks regards
About the lights... i don't know what to say, it's strange.
Try to reboot to download mode again (Press Volume Down + Power for about 10 seconds to exit and after the screen goes black, press Volume Down + Home + Power to get into download mode again).
Download an Odin flashable custom recovery (TWRP or PhilZ) and flash it using Odin. In options tab of Odin UNCHECK Auto-Reboot. After installing, exit download mode and when the screen goes black again, press and hold Volume Up + Home + Power. Now you should boot into one of the recoveries you have just installed.
Now, download a custom kernel from XDA (it could be arter97 kernel, Adam kernel or any other) and install it in the recovery.
Now you should be able to boot.
P.S.: To install the custom kernel you have to transfer the file into the device somehow. So, if you install PhilZ, use sideload installation (it is located in the Install zip context in PhilZ) for the kernel zip, and if you choose TWRP, connect the phone to the PC, go to Mounts, disable MTP and then reenable it and your PC should now recognize the phone. Then transfer the kernel zip into internal memory and install.
Villa_Man said:
About the lights... i don't know what to say, it's strange.
Try to reboot to download mode again (Press Volume Down + Power for about 10 seconds to exit and after the screen goes black, press Volume Down + Home + Power to get into download mode again).
Download an Odin flashable custom recovery (TWRP or PhilZ) and flash it using Odin. In options tab of Odin UNCHECK Auto-Reboot. After installing, exit download mode and when the screen goes black again, press and hold Volume Up + Home + Power. Now you should boot into one of the recoveries you have just installed.
Now, download a custom kernel from XDA (it could be arter97 kernel, Adam kernel or any other) and install it in the recovery.
Now you should be able to boot.
P.S.: To install the custom kernel you have to transfer the file into the device somehow. So, if you install PhilZ, use sideload installation (it is located in the Install zip context in PhilZ) for the kernel zip, and if you choose TWRP, connect the phone to the PC, go to Mounts, disable MTP and then reenable it and your PC should now recognize the phone. Then transfer the kernel zip into internal memory and install.
Click to expand...
Click to collapse
thanks for reply, I appreciate it
I install "twrp-2.8.7.1-zeroflte.img" than power of phone than boot into recovery, At recovery it shows trwp logo than black screen than logo(bootloop) but there is no recovery menu, I noted that color are showing normal when it shows twrp logo not like when it is download mode(good sign) ,
update: I flash stock recovery than instal twrp and result in successfully boot into twrp, when i try to install adam kernel it gives me error
E: Error executing updater binary in zip '/sdcard/sm-g920f_Adam.Kernel.2.0.cwp.zip
E: Error flashing zip '/sdcard/sm-g920f_Adam.Kernel.2.0.cwp.zip
Update partition details
E:unable to mount ' /system'
....done
than i wipe cache, dalvik cache and system , after that adam kernel successfully installed but problem is still there,
here is pic of in twrp , you can see display is normal
http://www.4shared.com/download/Jeh...c96207d729645cbd9ee34776c82af38e95f&lgfp=3000
nsnobel2 said:
thanks for reply, I appreciate it
I install "twrp-2.8.7.1-zeroflte.img" than power of phone than boot into recovery, At recovery it shows trwp logo than black screen than logo(bootloop) but there is no recovery menu, I noted that color are showing normal when it shows twrp logo not like when it is download mode(good sign) ,
Click to expand...
Click to collapse
Don't use the .img. Install the .tar.md5 of TWRP 2.8.7.2. You can download it if you search for zeroflte on www.twrp.me (devices).
Or you can try arter97's PhilZ Touch Recovery in .tar format.
Thanks villa for your suggestion, I update my 2nd post , pls read and suggest me
nsnobel2 said:
Thanks villa for your suggestion, I update my 2nd post , pls read and suggest me
Click to expand...
Click to collapse
Hmm, I guess the system partition was erased even if it failed in Odin.
Install a Custom ROM (like Arrow ROM or Crisscross which you can find at Edge forums) and it should be ok.
The kernel would have worked if you had the system partition intact.
Villa_Man said:
Hmm, I guess the system partition was erased even if it failed in Odin.
Install a Custom ROM (like Arrow ROM or Crisscross which you can find at Edge forums) and it should be ok.
The kernel would have worked if you had the system partition intact.
Click to expand...
Click to collapse
I already start downloading this custom rom,
http://forum.xda-developers.com/galaxy-s6/development/rom-pure-stock-extralite-v1-0-t3232498
hope this will work,
nsnobel2 said:
I already start downloading this custom rom,
http://forum.xda-developers.com/galaxy-s6/development/rom-pure-stock-extralite-v1-0-t3232498
hope this will work,
Click to expand...
Click to collapse
This is good, too.
I hope you will solve the problems.
Villa_Man said:
This is good, too.
I hope you will solve the problems.
Click to expand...
Click to collapse
net was so slow why so I am replying late, I install this file and after reboot phone shows samsung logo than restart
now what should I do?
Does your phone shows the bootanimation or only SAMSUNG GALAXY S6?
Gesendet von meinem SM-G920F mit Tapatalk
justgamer01 said:
Does your phone shows the bootanimation or only SAMSUNG GALAXY S6?
Gesendet von meinem SM-G920F mit Tapatalk
Click to expand...
Click to collapse
yes it shows "Samsng Galaxy S6 powered by android" and a red line upper left corner " Kernel is not seandroid enforcing"
here is pic you can see some blur
http://www.4shared.com/download/vkP...f010f2355f11851cda264c7acf955eab95f&lgfp=3000
nsnobel2 said:
net was so slow why so I am replying late, I install this file and after reboot phone shows samsung logo than restart
now what should I do?
Click to expand...
Click to collapse
Did you wipe the Cache, Data and System before installing the file?
EDIT: After seeing the last image, I suggest reinstalling the bootloader. Something is not right with those lights.
https://drive.google.com/folderview...sharing&tid=0B40ItdHKfkyQd1hJQXVDU3dDU2c#list
Download this firmware. Before installing it with Odin, go in TWRP and wipe Cache, Dalvik Cache, Data and System. And then close the recovery mode and enter download mode. Be sure to use the latest version of Odin which is 3.10.7 (you can download it here: http://forum.xda-developers.com/attachment.php?attachmentid=3446301&d=1440131361). After checking is everything is set up, put all the files provided in the zip into the correct place and start the operation. And a note, to be sure it will be alright, put the phone on a table or something while doing the operations and do not move the cable while it installs in Odin, it might give you a fail.
P.S.: If at the end it will give you an error at installing the modem, do not panic, restart download mode and install only the CP file which contains modem.bin.
Villa_Man said:
Did you wipe the Cache, Data and System before installing the file?
Click to expand...
Click to collapse
I did not but it ask for during flash the rom,
Dont know what happened but suddenly phone starts and go to main menu, it is normal but when I start the phone same error occurs, no normal start with splash screen and same strange screen in download mode
nsnobel2 said:
I did not but it ask for during flash the rom,
Dont know what happened but suddenly phone starts and go to main menu, it is normal but when I start the phone same error occurs, no normal start with splash screen and same strange screen in download mode
Click to expand...
Click to collapse
I edited my last post, look at the words I added.
Villa_Man said:
Did you wipe the Cache, Data and System before installing the file?
EDIT: After seeing the last image, I suggest reinstalling the bootloader. Something is not right with those lights.
https://drive.google.com/folderview...sharing&tid=0B40ItdHKfkyQd1hJQXVDU3dDU2c#list
Download this firmware. Before installing it with Odin, go in TWRP and wipe Cache, Dalvik Cache, Data and System. And then close the recovery mode and enter download mode. Be sure to use the latest version of Odin which is 3.10.7 (you can download it here: http://forum.xda-developers.com/attachment.php?attachmentid=3446301&d=1440131361). After checking is everything is set up, put all the files provided in the zip into the correct place and start the operation. And a note, to be sure it will be alright, put the phone on a table or something while doing the operations and do not move the cable while it installs in Odin, it might give you a fail.
P.S.: If at the end it will give you an error at installing the modem, do not panic, restart download mode and install only the CP file which contains modem.bin.
Click to expand...
Click to collapse
I have this file in my pc
G920FXXU3COI9_G920FBTU3COJ1_G920FXXU3COI9_HOME.tar.md5
but it is only 1 file not 3 or 4 files including bootloader file? is you file consists of 4 files? and should i use pit file too?
Deleted
System.img cannot complete flash it gives error, flashing stuck here almost 3-4 minutes than failed, here is pic
http://www.4shared.com/download/iCK...10754c07a4a514e5830f94c352d25d5595f&lgfp=3000
I did not use pit file , should I?
update: Just flash csc file and than flash all 4 files again and result was same as you told me that at the end it will give error at installing modem here are logs
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin engine v(ID:3.1100)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Set PIT file..
<ID:0/010> DO NOT TURN OFF TARGET!!
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> sboot.bin
<ID:0/010> NAND Write Start!!
<ID:0/010> param.bin
<ID:0/010> cm.bin
<ID:0/010> boot.img
<ID:0/010> recovery.img
<ID:0/010> system.img
<ID:0/010> modem.bin
<ID:0/010> Transmission Complete..
<ID:0/010> Now Writing.. Please wait about 2 minutes
<ID:0/010> FAIL!
<ID:0/010>
<ID:0/010> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/010> Removed!!
Click to expand...
Click to collapse
later I install cp file but still failed here are logs
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin engine v(ID:3.1100)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> modem.bin
<ID:0/010> NAND Write Start!!
<ID:0/010> Transmission Complete..
<ID:0/010> Now Writing.. Please wait about 2 minutes
<ID:0/010> FAIL!
<ID:0/010>
<ID:0/010> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
now at phone startup following message shows with yellow triangle
" An error has occurred while updating the device software us the Emergency recovery function in the Smart Switch PC software"
nsnobel2 said:
now at phone startup following message shows with yellow triangle
" An error has occurred while updating the device software us the Emergency recovery function in the Smart Switch PC software"
Click to expand...
Click to collapse
There must be a way to install the modem...
Try to extract the modem.bin from the CP zip and rename it to modem.bin.tar. Try to install it then in the same AP or CP slot in Odin (you can try to install it either on AP or CP and see which one works).
Villa_Man said:
There must be a way to install the modem...
Try to extract the modem.bin from the CP zip and rename it to modem.bin.tar. Try to install it then in the same AP or CP slot in Odin (you can try to install it either on AP or CP and see which one works).
Click to expand...
Click to collapse
I just install that custom rom again and phone is again in menu , PhoneInfo.apk shows following details of softare
Bootloader version:
G920FXXU3COI9
BASEBAND VERSION
G920FXXU3COJ2
PDA
G920FXXU3QOKX
CSC
G920FOJP3QOL1
if u need any details than tell me pls
nsnobel2 said:
I just install that custom rom again and phone is again in menu , PhoneInfo.apk shows following details of softare
Bootloader version:
G920FXXU3COI9
BASEBAND VERSION
G920FXXU3COJ2
PDA
G920FXXU3QOKX
CSC
G920FOJP3QOL1
if u need any details than tell me pls
Click to expand...
Click to collapse
So now your phone works?
Well if now everything is ok, I guess I don't need anything more.

Help: Trying and failing with arch linux on note 10.1 - stuck in loop

Hi
I would be very glad if anyone could help me with this. Possibly somebody with experience in installing Arch on Note 10.1 (GT-8000).
I had LineageOS installed on the note, but when reading about installing Arch from https://forum.xda-developers.com/showthread.php?t=2195778 I wanted to give it a try.
The thing was about downloading 2 files - recovery (recovery.img) and rootfs (linux.img). The linux.img file was to be stored on the "Real" SD card.
"Real" sdcard card is : >>>>> /mnt/shell/emulated as described in the text, - but since I had LineageOS, - not Cyanogenmod 10.1, I googled a little and thought they meant /mnt/storage. Used root privileges and placed linux.img there. I then executed
dd if=recovery.img of=/dev/block/mmcblk0p6 to setup recovery.
I took a reboot and the tablet looked like linux booting up, but eventually it stopped on this:
.
.
[ 3.016883] c0 [E-PEN] wacom_i2c_init: Sleep type-PEN_LDO_EN pin
losetup: /dev/loop0: No such file or directory
mount: special device /host/media/linux.img does not exist
mount: mount point /new_root/mnt/sdcard does not exist
fsck.ext2: Invalid argument while trying to open /deu/loop0
/dev/loop0:
The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
ERROR: fsck failed on '/dev/loop0'
ERROR: Failed to mount the real root device.
Bailing out, you are on your own. Good luck.
sh: can't access tty; job control turned off
[rootfs /]#
What to do now?
The tablet will try to boot every time I shut it off - so it is in a constant loop.
Is there any way to get back to TWRP or other way to boot up LineageOS?
Or is it possible to do something about the files and "recovery.img", possibly re-locating them: If so - should linux.img be placed under /host/media/linux.img as the system cannot find it there? Maybe it was the analogue location for LineageOS (parallell to Cyanogenmod).
Thanks in advance
<<What to do now?
The tablet will try to boot every time I shut it off - so it is in a constant loop.>>
Flash your stock rom with Odin .
Odin
JJEgan said:
<<What to do now?
The tablet will try to boot every time I shut it off - so it is in a constant loop.>>
Flash your stock rom with Odin .
Click to expand...
Click to collapse
Thank you. I will try that.
Note: Tried with Heimdall from Linux, without being able to "detect device".
Cannot flash with Odin
memorie said:
Thank you. I will try that.
Note: Tried with Heimdall from Linux, without being able to "detect device".
Click to expand...
Click to collapse
Tried to flash with Odin;
I first downloaded an english stock rom for my norwegian device and tested. Then I found and downloaded stock rom (2015 edition). My device was bought in 2013. Odin finds devices and goes on, but does not get past ;
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> tz.img
<ID:0/004> boot.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is it another way to undo the process with commands that set the tablet in this state?
I suspect the dd if= ... command caused this stuck in bootloop.
Is it any way to reverse it?
Are you 100Sure you are using correct Note model firmware ??

Categories

Resources