Related
Help me please..
My note died yesterday, started hanging while i was listening to music.
Tried to reset my note but now its stuck on Samsung Galaxy note 10.1 logo.
I'm using Omega Rom http://forum.xda-developers.com/showthread.php?t=2131474 for about 2 months with no problem encoutered until this one.
Can't access Recovery mode (just shows black screen but when i press the screen the device vibrates) - using Philz advance recovery
I can only access Download Mode, custom binary download: Yes (2 counts) and current binary/system status: both Custom
I tried flashing stock rom but failed
<ID:0/040> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N8000DXUCMB1_N8000OLBCMB1_795498_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/040> Odin v.3 engine (ID:40)..
<ID:0/040> File analysis..
<ID:0/040> SetupConnection..
<ID:0/040> Initialzation..
<ID:0/040> Get PIT for mapping..
<ID:0/040>
<ID:0/040> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried Flashing some n8000 note 10 pit files I've found searching on google but with no luck, saying that Re-partition operation failed.
Sorry if my english is bad, i am just desperate to fix my note T.T
F***** up partition information table .
You need a service centre repair but as you have no warranty it may be worth you trying to repair . See PIT info thread in development .
http://forum.xda-developers.com/showthread.php?t=2363703
I've tried the pit files for n8000 in the link you gave, still operation failed.
I guess i need to download stock ics rom in sammobile first as I only have stock jb available.
tnx btw
Did it Work?
So it's the same case for me too,
I was using Omega ROM. It was very good actually but one day it went to the boot screen and ceased there.
So I got the .pit files as mentioned above.
As you flashed 4.0.4 with the above pit file, did it work?
help me
hi friends & master
please help me
excuse me for question
I did not know what questions to ask
Is there any way to transfer games and apps to the internal storage with app2sd (moving apps & games in from system Rom to SD card(internal) no memory card)?
my system rom There is almost full
1.44 GB (148 MB free)
internal 12.6 GB (5.8 GB free)
SD card 12.5 GB (5.6 GB free)
I do not need to memory card
hi again
why long press and holding any app in menu not move in to info or recycle bin(for deleted) ?
this for all or me?
Unfortunately, flashing ICS stock or JB stock roms + pit file didnt work.
Tried different Odin versions to no luck.
Guess I need to send my note to samsung service center
So it's the same case for me too,
Has anyone figured out how to repair this error yet??? i've spent 4 days reading forums and google and whatnot and still i cant get this problem fixed. either solutions are for i9000 and not for infuse so procedures and roms are different. those who have infuse have not solved this error so i have no steps to follow. i've flashed like 7 different roms (some stock some modded) and nothing! i'm at my wits end i've been on and off on fixing this phone since 2013..... and anyone help me figure this out?? i'll answer all questions asap!
marielacvn said:
Has anyone figured out how to repair this error yet??? i've spent 4 days reading forums and google and whatnot and still i cant get this problem fixed. either solutions are for i9000 and not for infuse so procedures and roms are different. those who have infuse have not solved this error so i have no steps to follow. i've flashed like 7 different roms (some stock some modded) and nothing! i'm at my wits end i've been on and off on fixing this phone since 2013..... and anyone help me figure this out?? i'll answer all questions asap!
Click to expand...
Click to collapse
What's the consequence of this error? What are you doing when this error comes up? Any other messages?
I remember this one popping up before while flashing and it not meaning anything. Everything flashed fine. Mind you, this may have been with my primary phone, I cannot remember.
This Infuse thread may be of some help (or not, let me know):
http://forum.xda-developers.com/showthread.php?t=1581977
joel.maxuel said:
What's the consequence of this error? What are you doing when this error comes up? Any other messages?
I remember this one popping up before while flashing and it not meaning anything. Everything flashed fine. Mind you, this may have been with my primary phone, I cannot remember.
This Infuse thread may be of some help (or not, let me know):
http://forum.xda-developers.com/showthread.php?t=1581977
Click to expand...
Click to collapse
Consequence of the error is odd... I plugged my phone one night and left it charging in the morning the phone was off... When I wanted to turn it back on I got this error. This is not the only error.... I get another one E:copy_dbdata_media:Can't mount SDCARD
As for the link I've read that thread over and over and it was of no help because I did everything he did and still no results
marielacvn said:
Consequence of the error is odd... I plugged my phone one night and left it charging in the morning the phone was off... When I wanted to turn it back on I got this error. This is not the only error.... I get another one E:copy_dbdata_media:Can't mount SDCARD
As for the link I've read that thread over and over and it was of no help because I did everything he did and still no results
Click to expand...
Click to collapse
Sounds like a hardware error. Are you able to go into download mode? How about recovery? Do you have CWM, TWRP, or stock recovery? If you have the first two are you able to make and restore backups, and otherwise access the SD cards?
Finally, are you running stock, or a custom ROM? I see you mentioned earlier that you switched ROM's so even if it's happening with stock, then it's becoming less of a software issue in my thoughts. But if you have full access in recovery, then that would squash those thoughts. At that point, I would try to find a working ROM.
joel.maxuel said:
Sounds like a hardware error. Are you able to go into download mode? How about recovery? Do you have CWM, TWRP, or stock recovery? If you have the first two are you able to make and restore backups, and otherwise access the SD cards?
Finally, are you running stock, or a custom ROM? I see you mentioned earlier that you switched ROM's so even if it's happening with stock, then it's becoming less of a software issue in my thoughts. But if you have full access in recovery, then that would squash those thoughts. At that point, I would try to find a working ROM.
Click to expand...
Click to collapse
Yes I can go into Download mode and I'm able to flash successfully it just won't reboot afterwards.... It gives me the errors. The only recovery I can go into is the stock Android blue text menu. My phone is rooted and before this error I had cwm... After the error and trying to flash and recover I can't access cwm. I've tried gtgs unbrick stock rom, entopy's kernel, a couple of modded roms like aeon or legend and nothing I get the same results... Same error. But all flash successfully. Right now I'm in stock GB rom
marielacvn said:
Yes I can go into Download mode and I'm able to flash successfully it just won't reboot afterwards.... It gives me the errors. The only recovery I can go into is the stock Android blue text menu. My phone is rooted and before this error I had cwm... After the error and trying to flash and recover I can't access cwm. I've tried gtgs unbrick stock rom, entopy's kernel, a couple of modded roms like aeon or legend and nothing I get the same results... Same error. But all flash successfully. Right now I'm in stock GB rom
Click to expand...
Click to collapse
If you don't have ClockWorkMod I am assuming you are flashing all your ROMs through download mode. I thought that only stock ROMs were available for that. I learn something new everyday.
Anyways, it may be that Download mode is silently getting the write error when it comes to that partition. Did you try putting CWM back on?:
http://forum.xda-developers.com/showthread.php?t=1107881
I am really curious if you can access your (internal) SD card outside the boot process. If the partition table is shot, there is a process that repartitions everything, which in theory gets everything back to normal. It involved Odin, but I forget what the file was called. Pretty sure it was CWM itself, but I'm not sure (first reboot after installed whatever through Odin, I remember a voice alerting me to please wait while partitions are updated - about 5 minutes). I will have to look it up when I get home.
joel.maxuel said:
If you don't have ClockWorkMod I am assuming you are flashing all your ROMs through download mode. I thought that only stock ROMs were available for that. I learn something new everyday.
Anyways, it may be that Download mode is silently getting the write error when it comes to that partition. Did you try putting CWM back on?:
http://forum.xda-developers.com/showthread.php?t=1107881
I am really curious if you can access your (internal) SD card outside the boot process. If the partition table is shot, there is a process that repartitions everything, which in theory gets everything back to normal. It involved Odin, but I forget what the file was called. Pretty sure it was CWM itself, but I'm not sure (first reboot after installed whatever through Odin, I remember a voice alerting me to please wait while partitions are updated - about 5 minutes). I will have to look it up when I get home.
Click to expand...
Click to collapse
i tried putting cwm in by itself and it stays in starting connection indefinitely....this is when i just put a /tar file in odin under PDA. if i put the whole rom in with pit included and pda and phone files it's successful. this is the report i get after installing a rom with cwm included:
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I997UCLB3-CWM-root-deodex-extras.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I997UCLB3-CWM-root-deodex-extras.tar.md5 is valid.
<OSM> PHONE_UCLB3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.rfs
<ID:0/004> NAND Write Start!!
<ID:0/004> factoryfs.rfs
<ID:0/004> modem.bin
<ID:0/004> zImage
<ID:0/004> modem.bin
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response form LOKE
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
after my phone reboots i get this message in the screen:
---installing package...
finding update package...
opening update package...
verifying update package...
installing update...\
successfully installed package.
---copying media files----
E: failed to mount/dbdata (file exists)
E:copy_dbdata_media: Can't mount/db data your storage not prepared yet, please use UI menu for format and reboot actions.
media files copy failed.
--wiping cache...
formatting/cache...\
cache wipe failed.
----appling multi-csc...
installing multi-csc
applied the csc-code 'att'
successfully applied multi-csc.
from here i proceed to wipe data/factory reset from the menu.
----wiping data...
formatting/data...
formatting/dbdata...
E: format_volume: rfs format failed on /dev/block/stl10
Deleting meta data
formatting /cache...
data wipe complete.
if i try anything else i get
E:failed to mount/sdcard (file exists)
that's pretty much where i'm at right now....... it seems i have little to no communication with the internal sd card.
marielacvn said:
that's pretty much where i'm at right now....... it seems i have little to no communication with the internal sd card.
Click to expand...
Click to collapse
That's what it's looking like. Your cache partition looks fine, so must be your root partition (or whatever holds kernel and core bootstrap). If it was a desktop computer I would say either the partition table is bunged up or the tail end of the hard drive is inaccessible. I am stumped on how to get to the former. I will look at home for the Odin CWM file I had so you don't have to flash a whole ROM. It may just sit still forever like the CWM install you have (or it may not work at all because mine may be designed for i997R - Rogers kernel), but it's worth a try, since it's the only thing I can think of.
joel.maxuel said:
That's what it's looking like. Your cache partition looks fine, so must be your root partition (or whatever holds kernel and core bootstrap). If it was a desktop computer I would say either the partition table is bunged up or the tail end of the hard drive is inaccessible. I am stumped on how to get to the former. I will look at home for the Odin CWM file I had so you don't have to flash a whole ROM. It may just sit still forever like the CWM install you have (or it may not work at all because mine may be designed for i997R - Rogers kernel), but it's worth a try, since it's the only thing I can think of.
Click to expand...
Click to collapse
I'll pretty much try anything at this point.... Haven't used the phone in almost a year so I'll practically try anything. Kind of a bummer no solution still exists for this.... I'm thinking it might just be a hardware thing either way I'm standing by...
marielacvn said:
I'll pretty much try anything at this point.... Haven't used the phone in almost a year so I'll practically try anything. Kind of a bummer no solution still exists for this.... I'm thinking it might just be a hardware thing either way I'm standing by...
Click to expand...
Click to collapse
This is what I was thinking of:
http://forum.xda-developers.com/showthread.php?t=1197248
You are probably with AT&T so this would be a bad idea. It won't brick your phone, but weirdness occours like soft reboots. So with that in mind, try this link:
http://forum.xda-developers.com/showthread.php?t=1698367
...and download Entropy512's CWM red. If this doesn't load, I don't know where to go next.
joel.maxuel said:
This is what I was thinking of:
http://forum.xda-developers.com/showthread.php?t=1197248
You are probably with AT&T so this would be a bad idea. It won't brick your phone, but weirdness occours like soft reboots. So with that in mind, try this link:
http://forum.xda-developers.com/showthread.php?t=1698367
...and download Entropy512's CWM red. If this doesn't load, I don't know where to go next.
Click to expand...
Click to collapse
first link:
i downloaded Entropy512's Daily Driver / Red CWM Recovery, flashed it and this was the summary i got from odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> 2012.04.05-ODIN-Entropy_DD-GB-zImage.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> zImage
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
<ID:0/005> Added!!
after reboot i get this error
E:failed to mount /dbdata (invalid argument)
----copying media files...
E:failed to mount /dbdata (file exists)
E:copy_dbdata_media:can't mount /dbdata your storage not prepared yet, please use UI menu for format and reboot actions.
media files copy failed.
i also tried the same for Zen Arcade's Infusion-Z / Red CWM Recovery
2012.05.20-ODIN-Infusion-GB-Zen-CoreA-16.rar
2012.05.20-ODIN-Infusion-GB-Zen-CoreB-14.rar
same results....
as for link 2 and rooting with rogers my results were.....
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> PDA_UXKG3_rooted_no_bootloaders_v2.tar.md5 is invalid.
<OSM> End...
it was a no go.....
Try the Infused Gingerbread kernel one, after putting an AT&T stock rom back on. Guess I should have been more specific, if you were to try the Rogers route. Think it will have the same issue, but the above file is the one I used for CWM.
Sent from my MyTouch 4G Slide using XDA Free mobile app
joel.maxuel said:
Try the Infused Gingerbread kernel one, after putting an AT&T stock rom back on. Guess I should have been more specific, if you were to try the Rogers route. Think it will have the same issue, but the above file is the one I used for CWM.
Sent from my MyTouch 4G Slide using XDA Free mobile app
Click to expand...
Click to collapse
Just did it...same result....i think i'm throwing the towel in.... maybe a year from now i'll come back to it and see if anything has changed... j/k but really i think we gave it a real go. i'm always open to more ideas but for now i think its possibly fried inside... thanks for all the help though!!
No problem. Best of luck!
Sent from my MyTouch 4G Slide using XDA Free mobile app
a bit late on the reply but you might want to use the unbrick / Return to stock method in http://forum.xda-developers.com/showthread.php?t=1705260. I had this issue too trying to install new rom. This should at least get you passed the error onto working phone if it's not hardware malfunction. From there you can install cwm and do whatever. Hope this help.
if your infuse is the AT&T one you can try this as well http://forum.xda-developers.com/showthread.php?t=1524081
Young_Azul said:
if your infuse is the AT&T one you can try this as well http://forum.xda-developers.com/showthread.php?t=1524081
Click to expand...
Click to collapse
I never tried the one click version of it before.. but the normal Heimdall was a bit confusing for me compare to Odin. If I had not use Odin before Heimdall then maybe I would have gotten used to it..
scmfxt said:
I never tried the one click version of it before.. but the normal Heimdall was a bit confusing for me compare to Odin. If I had not use Odin before Heimdall then maybe I would have gotten used to it..
Click to expand...
Click to collapse
normal Heimdall is confusing but the one click isn't confusing if you read what's on the OP but that sad this is that it doesn't have root :/ and what i have noticed is when odin doesn't want to recognize your phone heimdall will....and just to get root and recovery i flashed twice with heimdall second time for the boot loaders...then i flashed through odin for the root with recovery version
marielacvn said:
after my phone reboots i get this message in the screen:
---installing package...
finding update package...
opening update package...
verifying update package...
installing update...\
successfully installed package.
---copying media files----
E: failed to mount/dbdata (file exists)
E:copy_dbdata_media: Can't mount/db data your storage not prepared yet, please use UI menu for format and reboot actions.
media files copy failed.
--wiping cache...
formatting/cache...\
cache wipe failed.
----appling multi-csc...
installing multi-csc
applied the csc-code 'att'
successfully applied multi-csc.
Click to expand...
Click to collapse
I remember fixing this problem by flashing (Odin) a "dbdata.rfs.tar" file from one of these forums. It was long ago so I don't quite remember where it was and what exactly my steps were. As far as my memory goes, I flashed I997UCLB3 via odin and then flashed "dbdata.rfs.tar". That fixed this problem. I will attach the "dbdata.rfs.tar" file on this post, hope you find a solutions :S. Sorry if you have already tried it >.<
driverless said:
I remember fixing this problem by flashing (Odin) a "dbdata.rfs.tar" file from one of these forums. It was long ago so I don't quite remember where it was and what exactly my steps were. As far as my memory goes, I flashed I997UCLB3 via odin and then flashed "dbdata.rfs.tar". That fixed this problem. I will attach the "dbdata.rfs.tar" file on this post, hope you find a solutions :S. Sorry if you have already tried it >.<
Click to expand...
Click to collapse
i've tried it already by decided what the hell i'll give it one last try again.....still nothing i'm now convinced that this is a hardware problem and not software. thanks again for the comment!
Cheers
I know people have struggled to track this ROM down so here you all go. Separate files all Odin-flashable. The AP is zipped because it halves the size. Just unzip and good to go.
Folder contains
AP_G550T1UVU1APF1_CL8180604_QB9902404_REV00_user_low_ship.tar.md5 *.zip
BL_G550T1UVU1APF1_CL8180604_QB9902404_REV00_user_low_ship.tar.md5
CP_G550T1UVU1APF1_CL8180604_QB9902404_REV00_user_low_ship.tar.md5
CSC_TMK_G550T1TMK1APF1_CL8180604_QB9902404_REV00_user_low_ship.tar.md5
Happy modding!
Link - https://www.androidfilehost.com/?w=files&flid=147594
-Zealot
Somehow I can't flash these files through Odin?
Any suggestion?
evrycard said:
Somehow I can't flash these files through Odin?
Any suggestion?
Click to expand...
Click to collapse
I have been trying all day and hope these files work. but my hopes are slim. I almost feel as if I'm doing something wrong.
---------- Post added at 08:19 AM ---------- Previous post was at 08:14 AM ----------
Zealotz said:
I know people have struggled to track this ROM down so here you all go. Separate files all Odin-flashable. The AP is zipped because it halves the size. Just unzip and good to go.
Folder contains
AP_G550T1UVU1APF1_CL8180604_QB9902404_REV00_user_low_ship.tar.md5 *.zip
BL_G550T1UVU1APF1_CL8180604_QB9902404_REV00_user_low_ship.tar.md5
CP_G550T1UVU1APF1_CL8180604_QB9902404_REV00_user_low_ship.tar.md5
CSC_TMK_G550T1TMK1APF1_CL8180604_QB9902404_REV00_user_low_ship.tar.md5
Happy modding!
-Zealot
Click to expand...
Click to collapse
Do I have to flash all the files at once or one by one or just the AP file. I have been trying all day to get the Firmwear flashed but it fails every time. I have never ran into this problem before.
Hey guys,
Check out this new Mod for Samsung galaxy on5
https://forum.xda-developers.com/android/development/mod-splash-screen-samsung-galaxy-on5-t3625967
Hi there, if i flash this rom may i be able to use with any network? right now i am sin locked
wowimjohnjohn said:
I have been trying all day and hope these files work. but my hopes are slim. I almost feel as if I'm doing something wrong.
---------- Post added at 08:19 AM ---------- Previous post was at 08:14 AM ----------
Do I have to flash all the files at once or one by one or just the AP file. I have been trying all day to get the Firmwear flashed but it fails every time. I have never ran into this problem before.
Click to expand...
Click to collapse
All at once, but apparently you cannot downgrade. I spent hours trying to flash PF1 from multiple sources and always failed on flashing boot but then I tried flashing PL1 for the heck of it and it worked like a charm the first time.
Dazed No More said:
All at once, but apparently you cannot downgrade. I spent hours trying to flash PF1 from multiple sources and always failed on flashing boot but then I tried flashing PL1 for the heck of it and it worked like a charm the first time.
Click to expand...
Click to collapse
How do you flash them all at once? Do you use Odin 3.12.3? Is there a certain order that the files should be in? Thank you.
EpicSaga said:
How do you flash them all at once? Do you use Odin 3.12.3? Is there a certain order that the files should be in? Thank you.
Click to expand...
Click to collapse
All at once. Just look at the filenames and load each in the appropriate slot.
Example:-
AP_G550T1UVU1APF1_CL8180604_QB9902404_REV00_user_l ow_ship.tar.md5 *.zip goes in AP slot
BL_G550T1UVU1APF1_CL8180604_QB9902404_REV00_user_l ow_ship.tar.md5 goes go in BL slot
CP_G550T1UVU1APF1_CL8180604_QB9902404_REV00_user_l ow_ship.tar.md5 goes in CP slot
CSC_TMK_G550T1TMK1APF1_CL8180604_QB9902404_REV00_u ser_low_ship.tar.md5 goes in CSC slot
Thank you, I did it and it worked!
"fail"
im trying to do this to my on5 smg550t1 but it doesnt work i keep getting fail after sboot.bin i put all the files in the right place im on the latest version of odin i put my phone in download mode before i plug into my laptop i dont know what i could be doing wrong
wke said:
im trying to do this to my on5 smg550t1 but it doesnt work i keep getting fail after sboot.bin i put all the files in the right place im on the latest version of odin i put my phone in download mode before i plug into my laptop i dont know what i could be doing wrong
Click to expand...
Click to collapse
The only thing you are doing wrong is skipping over the posts that explain you cannot downgrade to APF1, it will not physically let you. Other than that you are doing everything right.
Fail sboot.bin
I put files in order but when start, odin show me a fail in sboot.bin. I had downloaded 4 differen roms but always is the same fail. Please help me. Thanks
---------- Post added at 10:43 PM ---------- Previous post was at 10:34 PM ----------
Dazed No More said:
The only thing you are doing wrong is skipping over the posts that explain you cannot downgrade to APF1, it will not physically let you. Other than that you are doing everything right.
Click to expand...
Click to collapse
He my friend, could you help me please? I dont understand what do you want to tell us with downgrade? I have G550T1 sn APF1, i have this fail, so what version could i use? I didnt find the posts that explain that.
Stock rom Installed But Stuck On metro pc logo
Hi bro this rom is installed but stuck on metro pc logo.....
Dazed No More said:
All at once, but apparently you cannot downgrade. I spent hours trying to flash PF1 from multiple sources and always failed on flashing boot but then I tried flashing PL1 for the heck of it and it worked like a charm the first time.
Click to expand...
Click to collapse
Wow!!! Many many many Thanks to you to brother!! This messege save my life and me ON5!! I wasted a lot of time reading and serching even downloading files! But your post was like GOLD for me. Thank you once again
On5
Dazed No More said:
All at once, but apparently you cannot downgrade. I spent hours trying to flash PF1 from multiple sources and always failed on flashing boot but then I tried flashing PL1 for the heck of it and it worked like a charm the first time.
Click to expand...
Click to collapse
Hey im having the same exact problem, tried flashing and BOOM sboot.bin fail. I understand that I, can't downgrade however, I dont specifically understand what you mean by PL1 and PF1. Thanks in advance
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> CP_G550T1UVU1APF1_CL8180604_QB9902404_REV00_user_low_ship.tar (1).md5 is invalid.
<OSM> End...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> CP_G550T1UVU1APF1_CL8180604_QB9902404_REV00_user_low_ship.tar (1).md5 is invalid.
<OSM> End...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> CP_G550T1UVU1APF1_CL8180604_QB9902404_REV00_user_low_ship.tar (1).md5 is invalid.
<OSM> End...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Look at the firmware you are trying to flash. It ends with PF1....the firmware that succeeds it is PL1 and after that in not sure. Once you update from PF1 to another firmware you can never downgrade back to PF1, but you can downgrade from other more recent firmwares to PL1, why I am not sure.
can anyone help me plz i need an imei certificate for the smg550t1 / on5 metro pcs or a back up of any on5 efs
On 5
Dazed No More said:
Look at the firmware you are trying to flash. It ends with PF1....the firmware that succeeds it is PL1 and after that in not sure. Once you update from PF1 to another firmware you can never downgrade back to PF1, but you can downgrade from other more recent firmwares to PL1, why I am not sure.
Click to expand...
Click to collapse
Ah, ok seems simple enough. Would you still happen to have your PL1 files that you can upload?
JustAnotherWolf said:
Ah, ok seems simple enough. Would you still happen to have your PL1 files that you can upload?
Click to expand...
Click to collapse
No that was a long time ago....may I ask why you want to flash old firmware? It will prompt you to update to the newest anyways as soon as you boot up the phone so it seems counter productive...
My SM-G550T1 current build : MMB29K.G550T1UVU2AQC4
Dazed No More said:
Look at the firmware you are trying to flash. It ends with PF1....the firmware that succeeds it is PL1 and after that in not sure. Once you update from PF1 to another firmware you can never downgrade back to PF1, but you can downgrade from other more recent firmwares to PL1, why I am not sure.
Click to expand...
Click to collapse
As above (and FYI), my SM-G550T1 current build is MMB29K.G550T1UVU2AQC4. I'm just a novice and rooting/unlocking/flashing my first android. Do I need a copy of the stock ROM or will my Nandroid backup suffice? If so, I understand that the PL1 version is ok for my to use if need be. I guess the PL1 version is here on this site somewhere or I can Google it?
Thanks for all your attentiveness and insight....I would have been right among those flashing myself into a veritable slap-happy dither had I not benefited from the prior posts.
jb
Hi guys,
I have an S7 - SM-G930F. I tried rooting it, which caused this issue at first. I then tried various stock roms from samsung-firmware to sammobile (Vodafone the Netherlands)... in the end I found one from here, I tried it, only noticing I had the re-partition box checked.
Now my phone is stuck at this blue screen that says: "An error has occured..." - and I can't get into download mode anymore.
I'm scared I screwed this up. Is there still anything I can do?
Even tried with Smart switch and Kies, both give an error after filling in my model name... - "Unsupported device"
Please help..
Magetrip said:
Hi guys,
I have an S7 - SM-G930F. I tried rooting it, which caused this issue at first. I then tried various stock roms from samsung-firmware to sammobile (Vodafone the Netherlands)... in the end I found one from here, I tried it, only noticing I had the re-partition box checked.
Now my phone is stuck at this blue screen that says: "An error has occured..." - and I can't get into download mode anymore.
I'm scared I screwed this up. Is there still anything I can do?
Even tried with Smart switch and Kies, both give an error after filling in my model name... - "Unsupported device"
Please help..
Click to expand...
Click to collapse
Hi mate
First calm down , you will fix it
What firmware you had before rooting, Marsmellow , Nougat?
Why you had re partition on? when you had re partition you where using CSC file also?
how did you root?
In this cases the download issue may be caused by the bootloop itself , it becomes a timing issue....try several times and you will get into it eventually.
If you do re flash stock rom again
MAX 404 said:
Hi mate
First calm down , you will fix it
What firmware you had before rooting, Marsmellow , Nougat?
Why you had re partition on? when you had re partition you where using CSC file also?
how did you root?
In this cases the download issue may be caused by the bootloop itself , it becomes a timing issue....try several times and you will get into it eventually.
If you do re flash stock rom again
Click to expand...
Click to collapse
Thank you for your kindness.
I'm not sure to be honest. I updated it to the max, then I tried rooting it.
I think it got turned on, because this guide told me to add an PIT file.
However, I have managed to get back into download mode. I tried rooting by flashing.
What is the best thing u advice me to do from here?
Magetrip said:
Thank you for your kindness.
I'm not sure to be honest. I updated it to the max, then I tried rooting it.
I think it got turned on, because this guide told me to add an PIT file.
However, I have managed to get back into download mode. I tried rooting by flashing.
What is the best thing u advice me to do from here?
Click to expand...
Click to collapse
Hi
good you can get into download that is very good
When you say flashing root you mean by Odin or by recovery?
I would flash a stock rom again using CSC file and re- partition again...just to make sure the partition are the correct ones
Check here
Download the correct firmware and follow the instruction.......
MAX 404 said:
Hi
good you can get into download that is very good
When you say flashing root you mean by Odin or by recovery?
I would flash a stock rom again using CSC file and re- partition again...just to make sure the partition are the correct ones
Check here
Download the correct firmware and follow the instruction.......
Click to expand...
Click to collapse
Hi,
I'm happy I still have that possibility.
I rooted by Odin.
I have downloaded an firmware that belongs to the S7... - I will follow the guide.
When you say partition, you mean like this: http://prntscr.com/emplwv ?
Magetrip said:
Hi,
I'm happy I still have that possibility.
I rooted by Odin.
I have downloaded an firmware that belongs to the S7... - I will follow the guide.
When you say partition, you mean like this: http://prntscr.com/emplwv ?
Click to expand...
Click to collapse
Hi
To root in Nougat you have to flash it in custom recovery...by odin is not working
Regarding the picture yes like that BUT use CSC not home_csc , CSC contains the right PIT file
MAX 404 said:
Hi
To root in Nougat you have to flash it in custom recovery...by odin is not working
Regarding the picture yes like that BUT use CSC not home_csc , CSC contains the right PIT file
Click to expand...
Click to collapse
Yes, I downloaded the firmware Nougat.
Can u provide me a link that teaches me to flash it in custom recovery? Because all day I tried flashing Nougat with Odin. Maybe that's the problem.
Magetrip said:
Yes, I downloaded the firmware Nougat.
Can u provide me a link that teaches me to flash it in custom recovery? Because all day I tried flashing Nougat with Odin. Maybe that's the problem.
Click to expand...
Click to collapse
Hi
Here is the link for recovery and root all in one
https://forum.xda-developers.com/galaxy-s7/development/recovery-official-twrp-herolte-t3333770
But i would still recomend to try flashing a stock rom to make sure that everything is correct...then recovery , root or custom rom.......
Hi friend,
I have succesfully got TWRP on it. When I try the stockrom flash through odin like the picture, it fails me every time on 1/5 and says "FAIL!"
Is there anything I can do to solve this?
http://prntscr.com/en1zqo
everytime.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> param.bin
<ID:0/007> cm.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Magetrip said:
http://prntscr.com/en1zqo
everytime.
Click to expand...
Click to collapse
Why have you ticked re-partition?
Leave ODIN at default settings and only use BL, AP, CP and CSC
If that still fails, try missing out BL and just use the other 3
*Detection* said:
Why have you ticked re-partition?
Leave ODIN at default settings and only use BL, AP, CP and CSC
If that still fails, try missing out BL and just use the other 3
Click to expand...
Click to collapse
Now I thought'd be a good idea, to delete the bad files of fail every time.
When I do the AP-CP and CSC it still gives me the "FAIL!" with everything checked on.
I have no image on the phone, so I can't even boot it up anymore.
I did check however "OEM unlocked"... when I do the TWRP, I can boot into recovery.
But no stock roms work. I tried it from samsung-mobile and one from sammobile.
Now I am downloading another stock rom to try...
Also I don't use pit file when doing this. Should I?
What can I do?
http://prntscr.com/en4jag
I have tried 3 different stock roms, and all fail on 1/5th. Even without the BL inserted in. Also tried only doing AP...
Tried doing AP/CP/CSC in Odin v3.10
Then it goes to 2/5 and fails.
http://prntscr.com/en51kg
Magetrip said:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
Click to expand...
Click to collapse
*Detection* said:
Why have you ticked re-partition?
Leave ODIN at default settings and only use BL, AP, CP and CSC
If that still fails, try missing out BL and just use the other 3
Click to expand...
Click to collapse
Hi
Re partition is an option under some specific cases ( read here)
Try in a different PC / USB cable
Try a different Odin version
Go into recovery wipe dalvik/ cache and do a factory reset, flash again
Magetrip said:
Tried doing AP/CP/CSC in Odin v3.10
Then it goes to 2/5 and fails.
http://prntscr.com/en51kg
Click to expand...
Click to collapse
You need ODIN 3.12.3 minimum for this to work
Download
Code:
https://mega.nz/#!uBwC3KqR!17OPP5A1g9d7-GxAqCbjXFpmYfO7CgAHNcaZxqEkOao
Leave all settings as default, add all 4 sections of the ROM using CSC and try again
---------- Post added at 22:31 ---------- Previous post was at 22:30 ----------
MAX 404 said:
Hi
Re partition is an option under some specific cases ( read here)
Click to expand...
Click to collapse
Thanks for the info, was not aware of that
God bless you all.
This has resolved my issue:
- Tried it on my desktop (before on my laptop)
- Deleted Kies/Smart Switch
- Took another cable
- Tried the Odin 3.12.3
- Deleted dalvik/cache and factory reset
Works! Love you all. Tried over 8 hours. The solution is not always complicated...
Magetrip said:
God bless you all.
This has resolved my issue:
- Tried it on my desktop (before on my laptop)
- Deleted Kies/Smart Switch
- Took another cable
- Tried the Odin 3.12.3
- Deleted dalvik/cache and factory reset
Works! Love you all. Tried over 8 hours. The solution is not always complicated...
Click to expand...
Click to collapse
Great
Now you will love your S7 like never before lol
I rooted my Samsung S6 SM-G920F via Odin.
I tried installing Xpose. But once i did, My phone cut off, And now its flashing Blue led? I can access Download mode, and Recovery, As well as the Samsung logo screen. But sometimes it goes past the Samsung logo to a black screen.
I have tried using Odin to do a recovery and it just isn't letting me?
Anyone know how i can fix this?
Flash stock rom
Ragazzza said:
Flash stock rom
Click to expand...
Click to collapse
I'v tried. Doesn't work unless i'm doing something wrong
can you write the log of odin that showed you when flash firmware ,also what is your latest bootloader you have ?
shiko2007 said:
can you write the log of odin that showed you when flash firmware ,also what is your latest bootloader you have ?
Click to expand...
Click to collapse
I can't using Odin since this problem, I get "Setup Connection..."
And i'm new to this stuff, What's a bootloader sorry!
DarkMaGiicS_ said:
I can't using Odin since this problem, I get "Setup Connection..."
And i'm new to this stuff, What's a bootloader sorry!
Click to expand...
Click to collapse
bro , if you get Setup Connection you can try unplug and after that re plug again or try another usb cable
or another usb hub of computer and do after that odin can recognize your device .
what is exactly full name firmware you try to flash it will be like that " G920FXXS5DQA3"
shiko2007 said:
bro , if you get Setup Connection you can try unplug and after that re plug again or try another usb cable
or another usb hub of computer and do after that odin can recognize your device .
what is exactly full name firmware you try to flash it will be like that " G920FXXS5DQA3"
Click to expand...
Click to collapse
That's new. I never knew them suggestions!
Yeah, My problem is, I have no clue.
My only guessing searching through fimware that it could possible be G920FVIR5DQA2 that's a guess.
ok bro if you have that firmware "G920FVIR5DQA2" this mean you have latest bootloader that you know by "5DQA2" now try flash again your firmware and after that you can to enter stock recovery but you will lose your root after flashing stock rom so you must must to re -root again to pass the samsung logo or you will stuck on logo after flash
shiko2007 said:
ok bro if you have that firmware "G920FVIR5DQA2" this mean you have latest bootloader that you know by "5DQA2" now try flash again your firmware and after that you can to enter stock recovery but you will lose your root after flashing stock rom so you must must to re -root again to pass the samsung logo or you will stuck on logo after flash
Click to expand...
Click to collapse
Flash as in using Odin AP? If so, I done what you said, Once i add the file to Odin, It says "Please wait" and then doesn't respond?
can you post log of odin , also don't move your cable when is connected to the usb and make sure your connector is plug well
can you post log of odin , also don't move your cable when is connected to the usb and make sure your connector is plug well
Click to expand...
Click to collapse
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
Doing this now
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1100)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> cm.bin
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> system.img
is it flashing well now or it is stuck on system.img
is it flashing well now or it is stuck on system.img
Click to expand...
Click to collapse
My phone doing process in Download mode. But now its done, My phone is stuck in the "Samsung" Logo with the blue light still flashing?
you can try make soft reboot by (hold vol down+ power ) it will restart and should pass samsung logo but when you have root and knox trip i think it will not allow you to pass samsung logo so you should install twrp recovery and make backup your efs folder for safety reason and make install cf-root of your device and flash it in recovery
shiko2007 said:
you can try make soft reboot by (hold vol down+ power ) it will restart and should pass samsung logo but when you have root and knox trip i think it will not allow you to pass samsung logo so you should install twrp recovery and make backup your efs folder for safety reason and make install cf-root of your device and flash it in recovery
Click to expand...
Click to collapse
Tried. Giving it the blue light. i tried twrp at first, and that didn't solve the issue :/
you should wipe cash and delvic cash , do you flashed cf-root of your device or not ?
you should wipe cash and delvic cash , do you flashed cf-root of your device or not ?
Click to expand...
Click to collapse
Thank you dude! I have messaged you!
Solved
always relax and be patient with Samsung device
uninstall xposed
go to recovery n flash uninstall xposed zip or else flash stock firmware