Related
Thanks to user Nefirim over at Android Tablets Coby has released a new firmware update to the Coby Kyros Mid8024. he notes that it fixes the white screen of death that some users have experience when flashing modified images for this device.
http://www.cobyusa.com/files/software/MID8024-Firmware.zip
This link is the updated info about ICS on Coby Kyros ICS
http://forum.xda-developers.com/showpost.php?p=25904980&postcount=11
Edit : This post was about Coby Kyros 8024 , but recently Kernel Dev. NamKo over at slatedroid has pushed an alpha kernel that is for herotab c8 but happens to work slighty on Coby Kyros 1024.Using official source from urbetter..The kernel is not perfect but it allows us to use CM9 and ICS 4.04 on this tablet. There are many things not working but hoping to attract people with more knowledge to help out
http://www.slatedroid.com/topic/312...from-urbetter/page__view__findpost__p__337939
mid8024 firmware
did anyone actually use this. my mid1024 was semi-bricked, so i decided to try this. the manual also specified 1024, so what the hell.
The process was pretty smooth, but upon boot the screen (logo) was all messed up, it made it to the desktop and all i could make out was the time.
tried several times, zipped, unzippped. it accepted the procedure, but for the worst.
pretty bad. device will be going back to where it came from anyhow.
cfirpo99 said:
did anyone actually use this. my mid1024 was semi-bricked, so i decided to try this. the manual also specified 1024, so what the hell.
The process was pretty smooth, but upon boot the screen (logo) was all messed up, it made it to the desktop and all i could make out was the time.
tried several times, zipped, unzippped. it accepted the procedure, but for the worst.
pretty bad. device will be going back to where it came from anyhow.
Click to expand...
Click to collapse
I hope you got your deviced fixed,but the 8024 and 1024 are different The 1024 is capacitive screen while 8024 and 7024 have resistive screen.. Coby has released firmwares for the 7024,8024 and 1024. Also the update only fix devices which were soft bricked and had white screen of death...They do not update the android os
cfirpo99 said:
did anyone actually use this. my mid1024 was semi-bricked, so i decided to try this. the manual also specified 1024, so what the hell.
The process was pretty smooth, but upon boot the screen (logo) was all messed up, it made it to the desktop and all i could make out was the time.
tried several times, zipped, unzippped. it accepted the procedure, but for the worst.
pretty bad. device will be going back to where it came from anyhow.
Click to expand...
Click to collapse
The rom is chinese, click the settings icon go down and find the keyboardy icon and change language to english.
coby 8024 dead
hi can any body can help me i try to update coby 8024 with wrong firmware, and now phone is dead black screen only leds light when i push power and turn off.
Help me pleaseee
Kyros 8024 update
To whom it may concern... I have a tablet that looks exactly like the 8024 Kyros. The specs are the same, it's branded as Allview Here is a Gingerbread update. It's in Romanian. use Google translate
It says there don't use an microSD bigger than 1 Gb. Don't. I did and it bricked it. Luckly the service is like 3 miles away and they fixed it.
http://allview.ro/produse/droseries/lista-droseries/alldro-2/descriere.html
Friend I leave the gingerbread version for 8024 Kyros me based on the Romanian tablet "Tablet AllDro2" which is exactly equal to the Kyros 8024. - Official Firmware
This will only change CFW languages are by default (Romanian to English) , Build.prop, the wallpapers and logo.bmp.
Works 100% points.
htt*s://rapidshare.com/files/4287186128/CFW-Kyros_8024_2.3.rar
jmv_10 said:
Friend I leave the gingerbread version for 8024 Kyros me based on the Romanian tablet "Tablet AllDro2" which is exactly equal to the Kyros 8024. - Official Firmware
This will only change CFW languages are by default (Romanian to English) , Build.prop, the wallpapers and logo.bmp.
Works 100% points.
htt*s://rapidshare.com/files/4287186128/CFW-Kyros_8024_2.3.rar
Click to expand...
Click to collapse
Mine came with 2.2. From what I read initially Coby 8024 was Froyo too. I assumed that someone else might be interested.
Problems with COBY KYROS MID8024
I am also having problems after the firmware update
TABLET allview
after updating my firmware with this Kyros not turn over, it is only black screen and the buttons light up and then hangs up. Already tried the process of giving short pin 7 & 8 of the NAND memory but could not succeed.
What to do?
Apologies for the bad english, I'm from Brazil and I speak little English language.
Help me ... Did I miss my tablet?
my email is
[email protected].
thank.
All kyros model 7024,8024 & 1024 Now have a fully working gingerbread mod. All features working.
Sent from my Coby Kyros 7024
[WIP]Coby Kyros 1024 Running ICS
Disclaimer. This is not my work. This is CM-9 ported by SMDKV210 with NAMKO's Kernel(4/22/2012)
Flash this at your own risk. I take NO Responsibility for Bricking Your Device.
This rom is a work in progress. There are numerous things not working, because the kernel is not directly made for Coby Tablets.
This thread is to post your findings and possibly to help get a Kernel thats made for our tablets.
To flash this rom. Prepare a clean fat 32 formatted sdcard.This will format your internal Sdcard and erase your tablet contents.
Press and hold Home center button and Power Button,simultaneously, release when you see mid upgrade in progress. Do not press any buttons or attempt to power off your tablet. Let it up grade your software and it will shutdown when its done.
TESTED ON 1024N board Not sure if this will work on any other device. This kernel did not boot on my 8024 but I haven't tried with the new OS.
On first boot (well every boot) Kernel panics right away(The black penguin) and sometimes the display is snowy or has a faded effect. Just wait and the bootanimation will start. After tablet boots up There you are CM-9 on Coby Kyros 1024.
I suggest you restart tablet after first boot. I am just an end user like most of you I will help in any way possible. I am not a developer I made this so that others would be able to see and help with the development.
Home button works. Soft buttons do not work and I haven't figured out how to kill the lights
included:
Youtube
Aldiko Reader
Google Play(untested)
tapatalkxda
twitter
Nova Launcher
5/09/12
1024 board
nothing new except Namkos kernel on 5/2/2012. Built with thunderstorm beta 10 installer....
cm9 is the SMDKV210 version
4.04 is Namko with tuens tweaks to get wifi to connect manually...extsd is still not mounting and the usual non working items.....
Some apps are tweaked and the build.prop may need to be edited....I believe youtube vids are using hq in the 4.04 build added lastest aldiko reader to 4.04
http://www.mediafire....pclubp1k4p9np4
@Vernox701
how is the Coby MID 1024 performance? Any bugs or any issues encountered?
nice1_101 said:
@Vernox701
how is the Coby MID 1024 performance? Any bugs or any issues encountered?
Click to expand...
Click to collapse
Performance is fine
USB
Camera
Axis Rotation
Wifi Connection
HDMI ?
The kernel is made for a different device so things written on the kernel level are not communicated to the os.
You have to enter your wifi settigs manually to connect, turning off wifi shuts tablet down. Camera does not work but someone found sources so kernel dev maybe able to incorporate them soon.
I get over 10 hours of battery without use maybe 6 hours when I am using but there are no tweaks added other than reducing wifi scan in the build prop.
Vernox701 hello, is there any other site that I can follow the development step by step ROM compatible with Kyros 1024?
Do you have any prediction for a new release?
thank you
Coby Kyros MID7024
Where is the file? please update me.. thanks a lot..
link not found
Hi everybody
yesterday i install this rom in my viewpad 7 the proccess its the same but when the device turn on after welcome message, the touch screen its block and not permit change the language, any idea?
thanks and sorry for my english
Something is wrong with you installed
Do wipe and install the system again
i install other rom and i dont have problem´s, exist 2 version for roms? for example this rom have two versions http://forum.xda-developers.com/showthread.php?t=1224825 in my tablet the second one works. the ITE version, the first one cause the same problem the touch pad dont work on first boot in the change lenguage secction.
I know what happend whit my tablet, my table its a ITE device. the rom clean view beta its not a ITE ROM.
Hello ...
I experienced a lot issues an made some mistakes ...
But now my Acer Iconia Tab A511 runs perfectly as rooted tablet with JB :laugh:
... Unfortunately that JB is for the Iconia A510 so that i can't connect via 3G ....:crying:
As the official a511 JB update tried to "invade my Tablet (this was before i returned to the 4.0.3 Stock OS)
i could store it for later installation. 6bb1bd0aa675.Acer_A511_AV041.RV35RC04_AV051.RV00RC06_EMEA_DE.zip
Now i tried to install the right update via NoThrills recovery but got some errors.
I deleted at first the line in \META-INF\com\google\android\updater-script [assert(getprop("ro.product.name") == "a511_emea_de")]
so that the installation could go on ...but...
Has anybody an idea how i can update correctly?
Hello all together
I have the SE Xperia X10i .
I wanted to have Android 4 on it , which has also almost works, I have used these instructions : I cant post it
---- And all steps were as they should be .
I 've always done this as I usually do on other devices in CWM : Factory reset
Wipe CACHE
Wipe Dalvik cache
And REMICs -UX installed and Gapps
In both stood INSTALLING FROM SD CARD COMPLETE
Of SEUS I can install the firmware and reboot --- but I want Android 4
Now my problem : why it will not start ? It goes to vibrate , and will remain for hours at the Sony Ericsson logo are available and not go on , I have been waiting for 1.5-2 hours and repeatedly have taken out the battery , etc. I 'm not even so in the CWM .
Does anyone have a better guide for the whole thing ?
I despair :/: Verwirrt:
I appreciate any answer
I Apologize for my poor English and spelling errors , and I hope that ye have reasonably understood what my problem is .
Thanks in advance for the answers
: Finger gekreuzt:: Finger gekreuzt:: Finger gekreuzt:
Sincerely Ali
kingpk said:
Hello all together
I have the SE Xperia X10i .
I wanted to have Android 4 on it , which has also almost works, I have used these instructions : I cant post it
---- And all steps were as they should be .
I 've always done this as I usually do on other devices in CWM : Factory reset
Wipe CACHE
Wipe Dalvik cache
And REMICs -UX installed and Gapps
In both stood INSTALLING FROM SD CARD COMPLETE
Of SEUS I can install the firmware and reboot --- but I want Android 4
Now my problem : why it will not start ? It goes to vibrate , and will remain for hours at the Sony Ericsson logo are available and not go on , I have been waiting for 1.5-2 hours and repeatedly have taken out the battery , etc. I 'm not even so in the CWM .
Does anyone have a better guide for the whole thing ?
I despair :/: Verwirrt:
I appreciate any answer
I Apologize for my poor English and spelling errors , and I hope that ye have reasonably understood what my problem is .
Thanks in advance for the answers
: Finger gekreuzt:: Finger gekreuzt:: Finger gekreuzt:
Sincerely Ali
Click to expand...
Click to collapse
What rom are you trying to flash?you might have missed a step on flashing the rom, might need to do it all again.
my guess: have you flashed the correct kernel(if needed)?
X10 Feralab-Remics-UX
QUOBoothentoo;47066153]What are you trying to flash?you might have missed a step on flashing than, might need to do it all again.
my guess: have you flashed the correct kernel(if needed)?[/QUOTE]
Hello , Thanks for the answer
I dont know wich kernel i have flahed i only know that i try to flash Feralab Rom And Remics-UX
And both oft them are not Working when i try To flash another kernel the screen of my phone is than blank screen it works not the SE logo dont
comes.
I have rooted , unlocked the bootloader , flash the kernel i dont think that i habe missed a Stap.
The kernels Name dont know it like U20....
Hope you can help me
Hello. i want to ask if someone have Clockwork mod or some custom firmware on Prestigio PMP5670c Android 4.1.1.
I managed to root it, but i realy dont like this Android version and Prestigio is not intrested in upgrading.
Hey can someone make a recovery for this tablet.
Sent from my PMP5670C_DUO using xda premium
Shawes said:
Hello. i want to ask if someone have Clockwork mod or some custom firmware on Prestigio PMP5670c Android 4.1.1.
I managed to root it, but i realy dont like this Android version and Prestigio is not intrested in upgrading.
Click to expand...
Click to collapse
I started to do some work on that tabled, but stuck with kernel touchscreen configuration. See here.
Touch chip is Goodix GT911, screen size is 800x1280 px. I managed to get touch working but partialls. First aprox 1.2 inches of top of screen are not responsive to to touches. After that 1.5" touch works normally.
I'm pretty sure I'm sending wrong configuration data array to chip and thats why its not working as it should, but have no time at the moment to toy with it. If anyone experienced with Goodix chips, pm me with ideas...
stane1983 said:
I started to do some work on that tabled, but stuck with kernel touchscreen configuration. See here.
Touch chip is Goodix GT911, screen size is 800x1280 px. I managed to get touch working but partialls. First aprox 1.2 inches of top of screen are not responsive to to touches. After that 1.5" touch works normally.
I'm pretty sure I'm sending wrong configuration data array to chip and thats why its not working as it should, but have no time at the moment to toy with it. If anyone experienced with Goodix chips, pm me with ideas...
Click to expand...
Click to collapse
Update: I started to toy with stock kernel and cm10.2 (my first CM ever, was working with AOSP based SoC manufacturers sources). Problem is that device uses separate partition for internal sdcard, so have to disable emulated storage.
Things done:
- recovery
- android is built against precompiled stock kernel
Status:
- after bootanim and starting apps screen android reboots and starts back with bootanim. This was one day tryout, will debug it later today. Thanx to TeamNostalgia's preparation for cm10.2 on Amlogic MX. I used their framework and device stuff, upgraded with latest amlogic version of sources. Because of SLA I have with Amlogic, I cannot put it online.
any news abouth root final this tablet?
thx for info
stane1983 said:
I started to do some work on that tabled, but stuck with kernel touchscreen configuration. See here.
Click to expand...
Click to collapse
klobasica said:
any news abouth root final this tablet?
thx for info
Click to expand...
Click to collapse
On the link abouve is posted rooted stock firmware (mine post). To lazy ones click here
no, no...sorry i mean custom rom if is posable to create for this tablet...
klobasica said:
no, no...sorry i mean custom rom if is posable to create for this tablet...
Click to expand...
Click to collapse
It is. I'm not CM guy really, but its possible. If anyone interested, TeamNostalgia's github does have decent tree for Amlogic MXS tablets. I did some CM10.2 work for that tablet, but ended up with bootloop and reboot eventually. Didn't had time do debug it.
Here 4pda.ru/forum/index.php?showtopic=504411&view=findpost&p=29560411 is a customized firmware from Prestigio PMP3970B to work on Prestigio PMP5670C. But it does not run on PMP5670C, stands on the splash screen. Maybe someone will take to complete the firmware, it is better factory firmware for the tablet PMP5670C
ksh2000 said:
Here 4pda.ru/forum/index.php?showtopic=504411&view=findpost&p=29560411 is a customized firmware from Prestigio PMP3970B to work on Prestigio PMP5670C. But it does not run on PMP5670C, stands on the splash screen. Maybe someone will take to complete the firmware, it is better factory firmware for the tablet PMP5670C
Click to expand...
Click to collapse
I fixed U-Boot (wrote my own to support device tree kernel - 3.10.10) and fixed touch screen. I did not upload this fw, started to work yesterday on amlogic's 4.4 sources (they support both mx and m8 chipsets) (no, I cant share, I have SLA with them), I have boot, only left few things to test and then I'll upload 4.4.2.
Thank you for keep working! Waiting for rom)
Sent from my GT-I5510 using xda app-developers app
cyanodeff said:
Thank you for keep working! Waiting for rom)
Sent from my GT-I5510 using xda app-developers app
Click to expand...
Click to collapse
Here's beta version of rom: http://www.stane1983.com/prestigio_pmp5670c/
Read install instructions, needs to be installed twice, uboot still not perfect. Waiting for feedback
Btw, it's 4.2.2 rom, KitKat doesn't work good (unstable) on MXS chip.
Installed today morning. Seems all good! Thank you very much
Sent from my GT-I5510 using Tapatalk 2
babicsbalu said:
Unfortunatelly I can not able to install it because the second install is freezing all the time, now I can not install official 1.0.0.5 ROM, it stucked during the installation.
Click to expand...
Click to collapse
Rename uImage_recovery to recovery.img (when installing back stock firmware).
babicsbalu said:
Now I successfully installed the 1.0.05 but there is a quite big issue: I can not able to install anything from Play, the Download Manager is acutally (lots of system apps too) 0.0kb
Click to expand...
Click to collapse
I'm really sorry for inconveniences. With 1.0.05 files on sdcard, delete factory_update_param.aml file and boot into recovery (as if you want to install firmware). From menu using vol +/- and power for select choose factory reset (data partition is not formatted using old partition layout, thats why you have 0kb). After that you also can reflash firmware if you want (just select zip from sdcard).
stane1983 said:
Here's beta version of rom: http://www.stane1983.com/prestigio_pmp5670c/
Read install instructions, needs to be installed twice, uboot still not perfect. Waiting for feedback
Btw, it's 4.2.2 rom, KitKat doesn't work good (unstable) on MXS chip.
Click to expand...
Click to collapse
My daughter get this tablet from her grandfather on 03.05.2014 ( I guess she is lucky about that date ), and it was so slow and ugly and everything.
I installed your bety rom and everything is perfect. BUt after first reboot i get setup wizard again, but the first time after Install I only get FC ( just like I should ) but it didnt throw me back to setup wizard again.
Can I expect wizard setup every time I reboot or?
And Yes, thank you a lot for this awesome and fast work. The tablet is now so much more usable.
HVALA TI STANE MNOGO => THANK YOU STANE A LOT
@stane1983 I have the same problem as @babicsbalu. My pmp5670c is also stuck at black screen after rebooting and installing new stock firmware. I did both, renaming from uImage_recovery to recovery.img and deleting factory_update_param.aml and every time with the same result.
Please help me!
Or you can PM me (I'm from Croatia)
Hvala ti!
Well I also have prestigio tablet pmp5670C_BK_DUO and within a week it got bricked somehow. I guess that broken charging pin on cable had something to do with it - probably did a short circuit or something and boot loader got corrupt. Tabled was responding to connection of new charging cable, but only backlight turned on. There was no logo or anything.
I browsed several pages and nothing worked. I tried with official upgrade from SD card but it didn't work. It started to upgrade, android-upgrade logo came up, but after reboot nothing happened. Damaged bootloader was unable to start the tablet.
After a day or so I finally found a way how to unbrick it! Yeah.... So in attached file there is the detailed procedure, which I found on some Russian page.
Good luck!
Recovery.rar no longer available
imarkic said:
Well I also have prestigio tablet pmp5670C_BK_DUO and within a week it got bricked somehow. I guess that broken charging pin on cable had something to do with it - probably did a short circuit or something and boot loader got corrupt. Tabled was responding to connection of new charging cable, but only backlight turned on. There was no logo or anything.
I browsed several pages and nothing worked. I tried with official upgrade from SD card but it didn't work. It started to upgrade, android-upgrade logo came up, but after reboot nothing happened. Damaged bootloader was unable to start the tablet.
After a day or so I finally found a way how to unbrick it! Yeah.... So in attached file there is the detailed procedure, which I found on some Russian page.
Good luck!
Click to expand...
Click to collapse
I had a similar problem here and this method seems promising, but the recovery file indicated on the PDF is no longer available. Would you still have it lying around somewhere?
Thank you!!
PMP5670c Duo
I got this tablet 2 month ago, i have found on w w w 4pda ru 4 custom rooms for this tablet and i used google chrome to translate in english to understand what i have to do, i have instaled every one rom but i got a problem, with all custom rom the internal storage disapear. I instaled stock version now and the internal storage is there ready to be used. Custom roms are better than stock rom but it's annoyng me the missing internal storage. Anyone with this problem or anyone know how to fix it?
Edit: I instaled stock rom then i instaled again Firmware v.1.0.10 from MrCheba Repack and now i have internal storage working maybe reinstall the stock rom fix it.