Hello,
I recently acquired a Xperia X8 and tried to install a CFW, but i have some issues
So far, as i understood, i'm on android 2.1 root, using xrecovery, my baseband is 015, build 2.1.1.A.0.16, the cell is the international version ( not the american one ).
I tried to install FroyoBread v023b and i also tried the GingerDX v017, following closely the guides, and no matter what i try, i end up always stucked at the logo ( either froyobread or i don't remember what is written on the second one ). My x8 simply freeze at these logos, and i finally go again to the xrecovery menu, restoring my backup and am still on 2.1 root.
If anyone have an idea of where i did wrong and how to make me install finally one of these roms, it'd be really nice =)
Thanks
reply
hy my friend.i have also xperia x8 and after i lnstalled xrecovery,i installed cyanogen mode 7 and everything were ok.....try to install this first and then install gigner dx....i hope this helps u!!!!
well, it worth a try ^^ if i can ask you the link of cyanogen mode 7 you used please ^^
I tried to install a CFW too, i'm on android 2.1 Rooted and xRecovery installed , my baseband is 015, build 2.1.1.A.0.16,
I tried to install the GingerDX v017, I install rom manager and when I try to install CWM there is not X8 on phone list.
I sucesfully install Fdxperience with xrecovery and restore to 2.1...
Help me with Rom manager, CWM and GingerDX v017please!
Thanks!
Well, i tried to redownload the rom and install it in case i could have a problem with the file i downloaded ( i doubted of it but who knows u_u ), same problem. i still am freezing at the froyobread logo
- Edit -
I tried just now with another rom, installed using the recovery system, and weirdly, its the same, i freeze at the logo Hackdroid this time...
If I install GingerDX v13 with xrecovery, is it possible to upgrade it to v17 without CWM?
Iwo66 said:
If I install GingerDX v13 with xrecovery, is it possible to upgrade it to v17 without CWM?
Click to expand...
Click to collapse
man, nothing personal, but could you create your own thread for your problem please ^^it'll avoid this one to become messy
i rather keeping my thread clean, i won't be able to help you and am myself in need of help
thank you for your understanding =)
Ok, sorry!
Trefle said:
well, it worth a try ^^ if i can ask you the link of cyanogen mode 7 you used please ^^
Click to expand...
Click to collapse
take a look here.... android-xperiax8.blogspot.com/2011/06/rom-froyobread-by-doixanh.html
ok i found out the problem... it was the µSD that was causing issues... i removed it, i booted... then i partitionned it a second time ( maybe the ext 2 part was a bit too big and made crash the FW first launch, who knows )
- Closed -
hello!!!!i am really sorry to write here and not at lg gt 540 section but i really need a fast and reliable solution!as many answers are better.
8 hours ago me and my best friend (the owner of the gt540) had the idea to root his phone and install a custom rom.I have rooted my optimus2x several timesand i thought that it would be easier than it seemd to be.he'sphone had a factory problem.It couldn't connect to play store.so i downloaded the r4 and rooted he's phone.this is when the problems started.i installed clockworkmod but when i rebooted it booted normally.no clockworkmod recovery.so i followed some guides about have it done and finally i had to install an orange staf from france or england....(i do not remember).then i wiped data /factory reset and clear dalvik cashe and every rom i tried to install said fail status 7.i tried cyanogen , oxygen and more.now i can go cwm but when i let it boot normally it gets stuck at orange.please gime a solution cause tomorrow he is flying to Cyprus to college and he has to have at least a working phone there.uf anyone wants more than answer and can chat with me,i can tell you my Skype so that solution can be found much faster!!!thank you for your tine!!!!
wtf?????
well guys,i do not know what to say.....after several reboots it booted normally and unrooted.......i rooted the device from the start,all over and everything is ready....i do not know how it happened....
Hello team
I have an pico which came to me for restarting problem then i flashed it with stock rom and factory formatted all done....but the problem is....if i switch on mobile its gets on upto slide to open(upto lock screen) when i slide it to open it showing message "shutting down" and gets off..this is what happening all the time i cant fully operate the phone or its not getting in completely.....this is the problem but i dont know whether its software issue or hardware....Need help for repairing this mobile.
Try using cm 11 rc 1
mobileplazza said:
Hello team
I have an pico which came to me for restarting problem then i flashed it with stock rom and factory formatted all done....but the problem is....if i switch on mobile its gets on upto slide to open(upto lock screen) when i slide it to open it showing message "shutting down" and gets off..this is what happening all the time i cant fully operate the phone or its not getting in completely.....this is the problem but i dont know whether its software issue or hardware....Need help for repairing this mobile.
Click to expand...
Click to collapse
Hey Buddy I real feal bad hearing your problem. But lets Keep Cm11 In your Device And Fix This problem .
Go to this link to Put cm11 in your pico : http://forum.xda-developers.com/showthread.php?t=2535682
Remember Just download RC 1 And Gapps And follow the instruction Given There .
NOTE : FLASH THE GAPPS AS WELL BECAUSE IF YOU DONT YOUR PLAY STORE WILL ALWAYS BE CRASHED .
AND if you want to increase RAM and Internal memory Go here : http://forum.xda-developers.com/showthread.php?t=2735281
I hoped It will help You .
Thanks....
:good::good::good::good::good::good::good::good::good:
sagun khadka said:
Hey Buddy I real feal bad hearing your problem. But lets Keep Cm11 In your Device And Fix This problem .
Go to this link to Put cm11 in your pico : http://forum.xda-developers.com/showthread.php?t=2535682
Remember Just download RC 1 And Gapps And follow the instruction Given There .
NOTE : FLASH THE GAPPS AS WELL BECAUSE IF YOU DONT YOUR PLAY STORE WILL ALWAYS BE CRASHED .
AND if you want to increase RAM and Internal memory Go here : http://forum.xda-developers.com/showthread.php?t=2735281
I hoped It will help You .
Thanks....
:good::good::good::good::good::good::good::good::good:
Click to expand...
Click to collapse
thanks for your reply...r u sure that cw11 solve this problem....bcoz im in stock rom and i cant root now bcoz of the problem(straight question : have u experienced this kind a problem ?sorry im curious).
Hello ,
Currently I'm on C-ROM 7.0 . Today I flash the latest stable Paranoid Android ROM , all nice and fine until after about an hour of use , certain WiFi's disappeared . I thought it was just a ROM bug and proceeded to flash an earlier version but with the same result . Confused I turned to some other ROM's to test this and it turns out that several other ROM's are having this (even some that I have used before without this issue) ... I restored my C-ROM backup and everything worked fine .
My question is , is it something I'm not doing right while deleting / flashing ROM's ? Or is it something wrong with the phone ?
Using latest CWM Recovery after making a backup I'm using - Wipe Data/Factory Reset ; Wipe Cache ; Format System , afterwards I install the ROM zip , Gapps zip , reboot .
As stated , WiFi works fine for about an hour or so and afterwards it just isn't seen anymore by the phone (XT1032 btw)
Can somebody please help ?
I had the same problem (I opened a thread about it : http://forum.xda-developers.com/showthread.php?t=2801222)
The only solution I found was to change the wifi channel (I put the 9).
Sent from my Moto G using XDA Free mobile app
I see , thank you , I will try that at home , but the thing is the issue also happened when I was at work in the lunch break , and I do not have access to those WiFi routers .
Like you said in your thread , I'm thinking that something in the ROM's code changed (maybe by accident) leading to this :/
Hello
first of all sorry for the bad english, google trans is translated.. am german!
I've wanted to install a custom rom on my galaxy note 10 (n970f) for a long time.
I was very surprised when I switched to the download_mode .. everything in chinese or what do I know what kind of hyroclyphs they are ..
is that normal ..? or can you change that or where does that come from?
And the 2nd question right afterwards... I've tried several times to install a custom rom.. first unlocked the bootloader, installed twrp.. installed the custom rom.. deleted memory ect.. restarted.. but no matter what I do .. I only ever get a bootloop
could someone help me please ?
would be really nice ... if it were a German who could explain it to me it would be huge .. I'm not quite the youngest anymore
thank you once again !!
can anyone help? i try and test it every day.. but it doesn't work anymore.. i can't get a custom rom installed with odin and twrp anymore.. unfortunately! always just bootloop