Related
Hello folks. Today I did a cache, system, data wipe in TWRP on my G920F. After that I tried to restore a nandroid backup, but it failed and when I tried to restart it said there was no OS installed. So the phone wouldn't boot. I figured I did something wrong so I downloaded a 5.1.1 stock rom (UK) and flashed it with odin. But after the flash the phone would just bootloop. How can I revive the phone? Tried flashing the firmware again using another version of odin and also, I did a factory reset from the stock recovery, but no dice. Any ideas? Thanks in advance
Hey there,
check this thread here, should help (use TWRP to flash a ROM instead of Odin, links in thread).
Good luck!
Managed to make it work flashing another official rom, then factory reset. Lost all my files though...
Can be closed. Thanks!
Sent from my SM-G925F using Tapatalk
kendall1004 said:
Hey there,
check this thread here, should help (use TWRP to flash a ROM instead of Odin, links in thread).
Good luck!
Click to expand...
Click to collapse
How can i make TWRP flash a rom when Galaxy S6 doesn't have SD card to put the rom in the phone?
Immoblize said:
How can i make TWRP flash a rom when Galaxy S6 doesn't have SD card to put the rom in the phone?
Click to expand...
Click to collapse
Connect the phone to your PC and copy the ROM file to its root folder (just open "phone" and drop it there).
Using TWRP's "install" menu, you can browse your files and point it to this one; usually you're already in the right directory.
kendall1004 said:
Connect the phone to your PC and copy the ROM file to its root folder (just open "phone" and drop it there).
Using TWRP's "install" menu, you can browse your files and point it to this one; usually you're already in the right directory.
Click to expand...
Click to collapse
I wish that was so easy. I am on bootloop on my second day and i can fix it. I am getting crazy here. Nothing work - Kies, Smart Switch or Odin.
Immoblize said:
I wish that was so easy. I am on bootloop on my second day and i can fix it. I am getting crazy here. Nothing work - Kies, Smart Switch or Odin.
Click to expand...
Click to collapse
None of these three will help, i'm afraid.
The bootloop issue is a result of system write protection with 5.1.1 version, the phone tries to override a flashed recovery-
if it succeeds in automatically rebooting after you flashed, you're stuck on bootloop.
You have to flash a new kernel and root user via Odin, then flash TWRP and use it to install a new ROM.
A short description in this thread here, have a look.
As long as you can get into download mode, don't worry, nothings bricked :good:
kendall1004 said:
None of these three will help, i'm afraid.
The bootloop issue is a result of system write protection with 5.1.1 version, the phone tries to override a flashed recovery-
if it succeeds in automatically rebooting after you flashed, you're stuck on bootloop.
You have to flash a new kernel and root user via Odin, then flash TWRP and use it to install a new ROM.
A short description in this thread here, have a look.
As long as you can get into download mode, don't worry, nothings bricked :good:
Click to expand...
Click to collapse
THANKS A LOT for the info. I have today worked for about 8-9 hours to fix it. I will try read tomorrow on the site you put there and also read about how to put files to TWRP - since i don't have a SD card on my S6.
Immoblize said:
THANKS A LOT for the info. I have today worked for about 8-9 hours to fix it. I will try read tomorrow on the site you put there and also read about how to put files to TWRP - since i don't have a SD card on my S6.
Click to expand...
Click to collapse
Sleep over it, tomorrow is another day
Also, browse my recent postings here; most of them revolving around your issue, this will surely help.
kendall1004 said:
None of these three will help, i'm afraid.
The bootloop issue is a result of system write protection with 5.1.1 version, the phone tries to override a flashed recovery-
if it succeeds in automatically rebooting after you flashed, you're stuck on bootloop.
You have to flash a new kernel and root user via Odin, then flash TWRP and use it to install a new ROM.
A short description in this thread here, have a look.
As long as you can get into download mode, don't worry, nothings bricked :good:
Click to expand...
Click to collapse
Okay, i have done almost all of what you said.
But what im thinking about is the thread your refering to is to a S6 Edge and not for SM-G920F model.
But so far so good.
What kernel to you want me to flash? How can i root via Odin when i don't have USB-debugging on - But i can according to the thread, install SuperSU via TWRP.
I didn't know what kernel i had on, but i managed to install TWRP, install SuperSU via TWRP, pushing my stock rom to TWRP. But when installing the stock rom, it says "no md5 file found" or something like that. What am i doing wrong?
Immoblize said:
Okay, i have done almost all of what you said.
But what im thinking about is the thread your refering to is to a S6 Edge and not for SM-G920F model.
But so far so good.
What kernel to you want me to flash? How can i root via Odin when i don't have USB-debugging on - But i can according to the thread, install SuperSU via TWRP.
I didn't know what kernel i had on, but i managed to install TWRP, install SuperSU via TWRP, pushing my stock rom to TWRP. But when installing the stock rom, it says "no md5 file found" or something like that. What am i doing wrong?
Click to expand...
Click to collapse
Should work on both Edge and normal.
I have the G920F and did it this way, i also had problems, by the way:
http://forum.xda-developers.com/showpost.php?p=62550973&postcount=29
I recommend chosing an XtreStoLite ROM, the odexed version is an "improved stock" one, comes with a modified UniKernel and runs much smoother than stock.
Anyway, in TWRP, there is an option to skip md5 checking for backup files and for skipping the zipfile-check; not sure if you can also disable md5sum-checks.
Maybe you should try downloading the ROM from here or sammobile.de, verify the md5-sum yourself to make sure it is fine, and flash that one.
If TWRP doesn't think the ROM file is ok, it probably isn't ...
here's the odexed version of XtreStoLite:
http://forum.xda-developers.com/galaxy-s6/development/rom-xtrestolite-pure-edition-1-0-beta-1-t3082467
kendall1004 said:
Should work on both Edge and normal.
I have the G920F and did it this way, i also had problems, by the way:
http://forum.xda-developers.com/showpost.php?p=62550973&postcount=29
I recommend chosing an XtreStoLite ROM, the odexed version is an "improved stock" one, comes with a modified UniKernel and runs much smoother than stock.
Anyway, in TWRP, there is an option to skip md5 checking for backup files and for skipping the zipfile-check; not sure if you can also disable md5sum-checks.
Maybe you should try downloading the ROM from here or sammobile.de, verify the md5-sum yourself to make sure it is fine, and flash that one.
If TWRP doesn't think the ROM file is ok, it probably isn't ...
here's the odexed version of XtreStoLite:
http://forum.xda-developers.com/galaxy-s6/development/rom-xtrestolite-pure-edition-1-0-beta-1-t3082467
Click to expand...
Click to collapse
Okay, i have flashed TWRP, installed the kernel and Super SU (http://forum.xda-developers.com/gal...p-recovery-2-8-7-1-g925f-android-5-1-t3144866). But i can't flash the modem and bootloader for the XtreStoLite because it gives me Nand write error. I tried then to install XtreStoLite from TWRP which installed correctly but still doesn't fix the bootloop. I can read that i WILL get the bootloop if not using the correct modem and bootloader, but for some reason i am not able to flash them. Any help here? Or am i doing everything wrong here?
Immoblize said:
Okay, i have flashed TWRP, installed the kernel and Super SU (http://forum.xda-developers.com/gal...p-recovery-2-8-7-1-g925f-android-5-1-t3144866). But i can't flash the modem and bootloader for the XtreStoLite because it gives me Nand write error. I tried then to install XtreStoLite from TWRP which installed correctly but still doesn't fix the bootloop. I can read that i WILL get the bootloop if not using the correct modem and bootloader, but for some reason i am not able to flash them. Any help here? Or am i doing everything wrong here?
Click to expand...
Click to collapse
Alright, you have root access and TWRP is running.
All you have to do is install the ROM file (unextracted, as a .zip) from your phone`s root folder; if your model is a G920F, the bootloader should be 5.1.1 and work, no need to change.
When exactly does Odin give you the error message, right after you click start or after a few secs of flashing?
I suspect the issue to be related to first reboot after flashing the recovery,.
When finished flashing TWRP, did you successfully boot into recovery menu be pressing vol up+home+power?
If you saw the bootloop screen then, you`ll have to do it again, i'm afraid:
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. (...) Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
Click to expand...
Click to collapse
I know, it`s annoying; but give it another try:
use Odin 3.1.0.7 (run with admin rights), do a full wipe and install TWRP 2.8.7.
When doing so and Odin gives you the "finished/successfully flashed" message, immediately press & hold the key combo to get into recovery; don`t wait for the scrteen to change or unplug the phone, you need to be damn quick here.
If you have done it right, you are in TWRPs recovery menu.
From there, install the XtreStoLite ROM after doing a factory reset; reboot and you should be fine.
Aaaarrgh we will get this thing running, goddammit
kendall1004 said:
Alright, you have root access and TWRP is running.
All you have to do is install the ROM file (unextracted, as a .zip) from your phone`s root folder; if your model is a G920F, the bootloader should be 5.1.1 and work, no need to change.
When exactly does Odin give you the error message, right after you click start or after a few secs of flashing?
I suspect the issue to be related to first reboot after flashing the recovery,.
When finished flashing TWRP, did you successfully boot into recovery menu be pressing vol up+home+power?
If you saw the bootloop screen then, you`ll have to do it again, i'm afraid:
I know, it`s annoying; but give it another try:
use Odin 3.1.0.7 (run with admin rights), do a full wipe and install TWRP 2.8.7.
When doing so and Odin gives you the "finished/successfully flashed" message, immediately press & hold the key combo to get into recovery; don`t wait for the scrteen to change or unplug the phone, you need to be damn quick here.
If you have done it right, you are in TWRPs recovery menu.
From there, install the XtreStoLite ROM after doing a factory reset; reboot and you should be fine.
Aaaarrgh we will get this thing running, goddammit
Click to expand...
Click to collapse
What i did was install stock android via Odin.
Flashed TWRP
Flashed Alex V kernel first, then SUPER SU.
Flashed XtreStoLite and it still gives me bootloop.
What i can't manage to do is after flashing TWRP, then i am not fast enough to press Shutdown button, home button, and volume up button before the Samsung logo appears. I think that is the problem.
:silly:
Immoblize said:
What i did was install stock android via Odin.
Flashed TWRP
Flashed Alex V kernel first, then SUPER SU.
Flashed XtreStoLite and it still gives me bootloop.
What i can't manage to do is after flashing TWRP, then i am not fast enough to press Shutdown button, home button, and volume up button before the Samsung logo appears. I think that is the problem.
Click to expand...
Click to collapse
That IS the problem, i think :fingers-crossed:
Solved the same problem at reddit, take a look: reddit thread
Unfortunately, you must flash TWRP again to try once more, as soon as the samsung logo apperars, your custom recovery is overridden and thats it.
So now, take a deep breath, lean back and try again.
As soon as you have clicked to start the flashing procedure, press the 3 butons firmly, simultaneously and quick as lightning-
hold them down till it boots into TWRP.
Come on, even i have managed it after a few tries
kendall1004 said:
:silly:
That IS the problem, i think :fingers-crossed:
Solved the same problem at reddit, take a look: reddit thread
Unfortunately, you must flash TWRP again to try once more, as soon as the samsung logo apperars, your custom recovery is overridden and thats it.
So now, take a deep breath, lean back and try again.
As soon as you have clicked to start the flashing procedure, press the 3 butons firmly, simultaneously and quick as lightning-
hold them down till it boots into TWRP.
Come on, even i have managed it after a few tries
Click to expand...
Click to collapse
HMMM. I see.
It's not possible for me to boot into TWRP without the Samsung logo appears. I press the start, the same time i press the start, i press Power, Home and Volume Up button but still the logo appears. It takes 4 sec and it have flashed the TWRP. It's not possible...
Immoblize said:
HMMM. I see.
It's not possible for me to boot into TWRP without the Samsung logo appears. I press the start, the same time i press the start, i press Power, Home and Volume Up button but still the logo appears. It takes 4 sec and it have flashed the TWRP. It's not possible...
Click to expand...
Click to collapse
So, for some reason you can't enter recovery mode.
This could be
a) TWRP is not installed correctly (did you use the .img ot the .tar-file? Odin needs the .tar-format: link )
or
b) the kernel you flashed doesn't work with this-
here is the one i have used to root my S6.
I would try to reflash above Unikernel first, if you used the .img-file of TWRP rather than the .tar to flash TWRP,
do it again with the .tar file instead.
If this fails, the last thing would be to flash a unmodified stock ROM to restore the original setup including the bootloader...
i will look into this now a little bit deeper, there has to be a workaround.
Best of luck for now, we stay in touch
EDIT: the developer of XtreStoLite recommends another way with Chainfire's root:
Flash CF-Root for your model with Odin - Make sure you have an custom recovery installed (I advise you to use TWRP) (2.8.7.1 or newer REQUIRED for v.2.1 > of this ROM!!)
Click to expand...
Click to collapse
If the bootloader is your problem, you can update to the newest versions of bootloader and modem for your model following these instructions:
edgarf28`s instructions
I will do this right now, for a new version of XtreStoLite was just released today and i will upgrade.
Keep me informed
kendall1004 said:
So, for some reason you can't enter recovery mode.
This could be
a) TWRP is not installed correctly (did you use the .img ot the .tar-file? Odin needs the .tar-format: link )
or
b) the kernel you flashed doesn't work with this-
here is the one i have used to root my S6.
I would try to reflash above Unikernel first, if you used the .img-file of TWRP rather than the .tar to flash TWRP,
do it again with the .tar file instead.
If this fails, the last thing would be to flash a unmodified stock ROM to restore the original setup including the bootloader...
i will look into this now a little bit deeper, there has to be a workaround.
Best of luck for now, we stay in touch
EDIT: the developer of XtreStoLite recommends another way with Chainfire's root:
If the bootloader is your problem, you can update to the newest versions of bootloader and modem for your model following these instructions:
edgarf28`s instructions
I will do this right now, for a new version of XtreStoLite was just released today and i will upgrade.
Keep me informed
Click to expand...
Click to collapse
I can enter the recovery mode (TWRP) but not before the Samsung logo appears when i install TWRP. I have tried many times and i still can't enter TWRP before the samsung logo appears for 1-2 secs.
I am not able to flash Edgar28s bootloader and modem because it always gives me nand write error fail. I think it's because i'm not rooted with CFautoroot - and to get rooted with that way, i have to have USB debuggin on which i don't have.
What i think is, that i was very close but i still can't manage to enter TWRP (after installing) without the samsung logo appears for 1-2 secs. Because what you said before "Unfortunately, you must flash TWRP again to try once more, as soon as the samsung logo apperars, your custom recovery is overridden and thats it."
So what do you think now?
And btw thanks for all the help so far. I'm trying my best and following your steps but i always think i'm very close. I'm also so close to destroy my phone but i've read so many places that "it's only a softbrick, that can be fixed very easy".
Immoblize said:
I can enter the recovery mode (TWRP) but not before the Samsung logo appears when i install TWRP. I have tried many times and i still can't enter TWRP before the samsung logo appears for 1-2 secs.
I am not able to flash Edgar28s bootloader and modem because it always gives me nand write error fail. I think it's because i'm not rooted with CFautoroot - and to get rooted with that way, i have to have USB debuggin on which i don't have.
What i think is, that i was very close but i still can't manage to enter TWRP (after installing) without the samsung logo appears for 1-2 secs. Because what you said before "Unfortunately, you must flash TWRP again to try once more, as soon as the samsung logo apperars, your custom recovery is overridden and thats it."
So what do you think now?
And btw thanks for all the help so far. I'm trying my best and following your steps but i always think i'm very close. I'm also so close to destroy my phone but i've read so many places that "it's only a softbrick, that can be fixed very easy".
Click to expand...
Click to collapse
OK, so you can enter the TWRP menu and install a ROM, right?
Any stock ROM from sammobile.com includes firmware, kernel and bootloader, so flashing the right one of these should reset all this.
Give it a try, for i think TWRP is actually working- otherwise you wouldn't get to the screen.
If the phone runs again with stock firmware, you can then flash a custom ROM.
And yeah, we're close, this can be only a minor flaw...it's near impossible to brick your android phone, so they say.
Don't worry mate, and be assured you're not the only one:
i just got stuck on bootloop also for a few minutes after upgrading to the newest version of XtreStoLite, which came out today.
Using TWRP, i could just flash back the previous version and all's good again.
Cya tomorrow...
EDIT:
I read through your previous comments again; the "md5sum"- issue seems to be a problem with the ROM file itself (corrupted or wrong version).
I'd bet that flashing the correct stock firmware for your carrier and model will solve the problem.
So enter the exact model number (like G920FXXU3COI9 or such) you have, get the right ROM and flash it with Odin 3.10.7
I couldn't find a denmark carrier on sammobile, eventually you have to look here at XDA, there's a list of stock imges as well.
Read lots of threads around this issue, almost all solved the problem flashing a stock ROM again.
Fingers crossed :fingers-crossed:
OK, so you can enter the TWRP menu and install a ROM, right?
Any stock ROM from sammobile.com includes firmware, kernel and bootloader, so flashing the right one of these should reset all this.
Give it a try, for i think TWRP is actually working- otherwise you wouldn't get to the screen.
If the phone runs again with stock firmware, you can then flash a custom ROM.
And yeah, we're close, this can be only a minor flaw...it's near impossible to brick your android phone, so they say.
Don't worry mate, and be assured you're not the only one:
i just got stuck on bootloop also for a few minutes after upgrading to the newest version of XtreStoLite, which came out today.
Using TWRP, i could just flash back the previous version and all's good again.
Cya tomorrow...
EDIT:
I read through your previous comments again; the "md5sum"- issue seems to be a problem with the ROM file itself (corrupted or wrong version).
I'd bet that flashing the correct stock firmware for your carrier and model will solve the problem.
So enter the exact model number (like G920FXXU3COI9 or such) you have, get the right ROM and flash it with Odin 3.10.7
I couldn't find a denmark carrier on sammobile, eventually you have to look here at XDA, there's a list of stock imges as well.
Read lots of threads around this issue, almost all solved the problem flashing a stock ROM again.
Fingers crossed
Click to expand...
Click to collapse
Yeah, i've never had problems entering TWRP menu. I can flash stock firmware via Odin but i can never do it via TWRP because it's says no md5 file found error - tho i can flash XtreStoLite (i think it's because it says aroma installer).
I've read many places about the md5 file error, but for some reason, i can't figure out how to fix it.
No, there is no Denmark model, but we have NEE (Nordic). The only stock firmware i can install is XEF (i don't remember where i got that from actually).
I will try agian and flash stock android via TWRP AND read about the md5 file error now/later. Tomorrow i will call the store i got the phone from and tell them i have a hardware issue or something like that. The guy owns a store for sellings covers, cases and stuff like that. He got the phone from Samsung free and sold it brand new in the package with 1 year warranty, so i will contact him tomorrow if i can't figure out how to flash stock android via TWRP or if it gives me error about the md5 file.
Talk to you tomorrow.
Update: I can not flash NEE model via Odin. Only XEF model - i also found out it was French firmware.
I just received notification for OTA update. (134MB)
BLU_p0010UU_V11_GENERIC_5.1_20151123-0956
1. Stagefright patch
2. google security patches
3. Mcafee security 2015
4.Other bug fixes
Anyone tried it ?
i want to know if it is going to try and stick me with mcafee. . . happy to see an update, though!
you can remove mcafee after the update.
Can anyone upload ota?
Yes please. I'm rooted and it won't let me download the update. If someone could even offer a system dump that would be helpful.
---------- Post added at 02:29 PM ---------- Previous post was at 02:28 PM ----------
If only for the stage fright patch
---------- Post added at 02:32 PM ---------- Previous post was at 02:29 PM ----------
Also if someone could offer a system dump of the newest upgrade I'd be more than willing to cook up a rooted stock rom. I know I haven't been on the forums much lately at all but I remember working on stuff back in the t-mobile g1 days
Rooting after the update
I only first tried to root my Blu Pure XL after the update was installed. I find that the boot loader is locked and I can not find a way to gain access. I am not sure if the update added this major inconvenience but I suspect it did as the rooting method as described will not work for me at all. Any thoughts or suggestions?
blacksmithjk said:
I only first tried to root my Blu Pure XL after the update was installed. I find that the boot loader is locked and I can not find a way to gain access. I am not sure if the update added this major inconvenience but I suspect it did as the rooting method as described will not work for me at all. Any thoughts or suggestions?
Click to expand...
Click to collapse
ive updated with every ota and root works fine... boot loader isnt locked... try to flash twrp via fastboot, and if that doesnt work enable developer options in settings and "Enable OEM unlock"
but like i said Ive flashed back to stock FW with SP tool (compete stock boot, recovery, and system ver .11) so if any update would have locked BL it would have locked mine... but it didnt, doesnt, and hasnt...
Follow the thread about twrp... it gives you very easy to follow directions.
Yeah, I did the OTA update before rooting, and it didn't want to allow me after the OTA update.
I downloaded multiple files from all over the place, placed them in a "root" subfolder and it still seemed impossible.
Got it done AFTER 3 days
so...
using flashboot to flash twrp, after the OTA,
then using twrp to flash the SU.zip took 3 days?
what files and "root folder" are you referring to?
Sounds like sever case of lack of reading or lack or user error;
But Im glad you stuck with it long enough to get it working...
ArconHadron said:
Yeah, I did the OTA update before rooting, and it didn't want to allow me after the OTA update.
I downloaded multiple files from all over the place, placed them in a "root" subfolder and it still seemed impossible.
Got it done AFTER 3 days
Click to expand...
Click to collapse
tbirdguy said:
ive updated with every ota and root works fine... boot loader isnt locked... try to flash twrp via fastboot, and if that doesnt work enable developer options in settings and "Enable OEM unlock"
but like i said Ive flashed back to stock FW with SP tool (compete stock boot, recovery, and system ver .11) so if any update would have locked BL it would have locked mine... but it didnt, doesnt, and hasnt...
Follow the thread about twrp... it gives you very easy to follow directions.
Click to expand...
Click to collapse
tbirdguy said:
so...
using flashboot to flash twrp, after the OTA,
then using twrp to flash the SU.zip took 3 days?
what files and "root folder" are you referring to?
Sounds like sever case of lack of reading or lack or user error;
But Im glad you stuck with it long enough to get it working...
Click to expand...
Click to collapse
Thanks, hardest part was actually getting phone to boot into flash mode.
Specifically, holding Power plus Volume+ is fine, but you have to let go of the power button first, then the Volume+.
Plus, I had to adb reboot before getting the TWRP rom to flash properly....
Not my best effort, but findintg SPECIFIC instructions were difficult, and had to manually search for latest fastflash and TWRP......v2.8.6.0
ArconHadron said:
Thanks, hardest part was actually getting phone to boot into flash mode.
Specifically, holding Power plus Volume+ is fine, but you have to let go of the power button first, then the Volume+.
Plus, I had to adb reboot before getting the TWRP rom to flash properly....
Not my best effort, but findintg SPECIFIC instructions were difficult, and had to manually search for latest fastflash and TWRP......v2.8.6.0
Click to expand...
Click to collapse
Fastflash?
Manually search?
Under the Development heading there are 5 topics, 2 of which are for TWRP recoveries (3.0.2 is buggy but works, just takes long time to wipe and restore; and theres SOOOOO many posts about how to flash them and how to use SP Flash Tool... so once again; glad you stuck with it, but Im still going with user error due to fail to RTFM
I want to flash the latest bootloader and modem to my G920F. But the problem is, that I have no idea for what is this etc. Could someone explain, could I install the bootloader and a modem with a different designation than my rom? For example, I have now COI9, can i flash another modem than with the designation COI9? I someone could, please link to the latest version, thank you!
You dont need to do it... Always stick with the modem and bootloader same as the system... Mixmatching those files can couse battery drain ( radio interference , deep sleep problems ) ... For the time ive used the s6 COI9 was the best modem i ever tested.. So stay with OI9
lummujaj said:
You dont need to do it... Always stick with the modem and bootloader same as the system... Mixmatching those files can couse battery drain ( radio interference , deep sleep problems ) ... For the time ive used the s6 COI9 was the best modem i ever tested.. So stay with OI9
Click to expand...
Click to collapse
when my rom is on DOK9, will be better, when i flash modem/bootloader from DOK9?
botanicfts said:
when my rom is on DOK9, will be better, when i flash modem/bootloader from DOK9?
Click to expand...
Click to collapse
yes and no ... as i said mixing ap,bl,cp can cause weird stuff ... for my opinion is IO9 BTU ... best battery life and less bloatware ... and i think will be the 1st to get MM official ...
lummujaj said:
yes and no ... as i said mixing ap,bl,cp can cause weird stuff ... for my opinion is IO9 BTU ... best battery life and less bloatware ... and i think will be the 1st to get MM official ...
Click to expand...
Click to collapse
can you give me link for the OI9 bootloader, modem etc? thanks!
botanicfts said:
can you give me link for the OI9 bootloader, modem etc? thanks!
Click to expand...
Click to collapse
https://drive.google.com/uc?id=0B40ItdHKfkyQSmNOWjFIa1JRWms&export=download
download and extract
lummujaj said:
https://drive.google.com/uc?id=0B40ItdHKfkyQSmNOWjFIa1JRWms&export=download
download and extract
Click to expand...
Click to collapse
what should i flash from these 4 files? im newbie xD
botanicfts said:
what should i flash from these 4 files? im newbie xD
Click to expand...
Click to collapse
bl - botloader
ap - system
cp - modem
csc - csc
i prefer you to flash them all + pit file ,,, BTU is the most stock debloated and most stable rom ...
anyway i dont have anymore my galaxy s6 ive swaped with an oneplus 2
lummujaj said:
bl - botloader
ap - system
cp - modem
csc - csc
i prefer you to flash them all + pit file ,,, BTU is the most stock debloated and most stable rom ...
anyway i dont have anymore my galaxy s6 ive swaped with an oneplus 2
Click to expand...
Click to collapse
so, I searched at the forum and probably i'll test the marshmallow, then I'll try a few combinations with roms, kernels etc. because my battery life on my s6 dont satisfied me
If you try MM make sure your device will "deep sleep"
lummujaj said:
bl - botloader
ap - system
cp - modem
csc - csc
i prefer you to flash them all + pit file ,,, BTU is the most stock debloated and most stable rom ...
anyway i dont have anymore my galaxy s6 ive swaped with an oneplus 2
Click to expand...
Click to collapse
Hi,
I have this galaxy s6 that only boots in download mode.. I literally flashed every stockrom and recovery etc. Have you got any other solution I could try? I tried pit file but it gives me an error... maybe it's not the right pit file. PLS ow pretty PLS, give me a link to a good debloated odin flashable stock rom and a good pit file. I'm pretty desperate about this phone. it does boot in download so I guess this phone is still fixable. I also tried Nand Erase All option, it passes but still no normal boot nor recovery. so can you tell me where to find a good rom and pit file?
Thanks in advance
liobeir said:
Hi,
I have this galaxy s6 that only boots in download mode.. I literally flashed every stockrom and recovery etc. Have you got any other solution I could try? I tried pit file but it gives me an error... maybe it's not the right pit file. PLS ow pretty PLS, give me a link to a good debloated odin flashable stock rom and a good pit file. I'm pretty desperate about this phone. it does boot in download so I guess this phone is still fixable. I also tried Nand Erase All option, it passes but still no normal boot nor recovery. so can you tell me where to find a good rom and pit file?
Thanks in advance
Click to expand...
Click to collapse
Im afraid i cannot help.. this post is more than 3 years old ... I can suggest you flash twrp and a costom rom of your choice
Did the same thing last week
liobeir said:
Hi,
I have this galaxy s6 that only boots in download mode.. I literally flashed every stockrom and recovery etc. Have you got any other solution I could try? I tried pit file but it gives me an error... maybe it's not the right pit file. PLS ow pretty PLS, give me a link to a good debloated odin flashable stock rom and a good pit file. I'm pretty desperate about this phone. it does boot in download so I guess this phone is still fixable. I also tried Nand Erase All option, it passes but still no normal boot nor recovery. so can you tell me where to find a good rom and pit file?
Thanks in advance
Click to expand...
Click to collapse
I've been there with my S6 Edge...only a week ago while I was installing LineageOS. I was feeling pretty hopeless for awhile but installing a custom ROM got my phone to the point where it was usable again. I'm still burning through firmware variations from sammobile in search of a better modem but at least I got it working again. Odin is your friend.
AKdballs said:
I've been there with my S6 Edge...only a week ago while I was installing LineageOS. I was feeling pretty hopeless for awhile but installing a custom ROM got my phone to the point where it was usable again. I'm still burning through firmware variations from sammobile in search of a better modem but at least I got it working again. Odin is your friend.
Click to expand...
Click to collapse
Can I make any rom zip flashable in odin? Because I can't get in recovery... And I don't know if I'm rooted.. Because I did flash cf root but yeah... I don't know if I'm rooted now.
Flash TWRP
liobeir said:
Can I make any rom zip flashable in odin? Because I can't get in recovery... And I don't know if I'm rooted.. Because I did flash cf root but yeah... I don't know if I'm rooted now.
Click to expand...
Click to collapse
Why can't you get into recovery? If you can get your phone into download mode, then you can use Odin to install TWRP which will give you access to recovery. You said you had the S6 right, not Edge? You can get TWRP for that version here https://twrp.me/samsung/samsunggalaxys6.html and then install it with Odin. After that, boot into recovery, and then plug your phone into a computer and transfer your ROM onto the phone and install it. If you aren't able to get that part of it done, then the stock firmware for your S6 may be available for download from https://www.sammobile.com/ and those can be flashed using Odin. If one of those doesn't work, try a different one until you find one that works. Good luck; don't lose hope. I have found my S6 Edge resilient and hard to permanently brick.
AKdballs said:
Why can't you get into recovery? If you can get your phone into download mode, then you can use Odin to install TWRP which will give you access to recovery. You said you had the S6 right, not Edge? You can get TWRP for that version here https://twrp.me/samsung/samsunggalaxys6.html and then install it with Odin. After that, boot into recovery, and then plug your phone into a computer and transfer your ROM onto the phone and install it. If you aren't able to get that part of it done, then the stock firmware for your S6 may be available for download from https://www.sammobile.com/ and those can be flashed using Odin. If one of those doesn't work, try a different one until you find one that works. Good luck; don't lose hope. I have found my S6 Edge resilient and hard to permanently brick.
Click to expand...
Click to collapse
Ow believe me I have tried this. I tried stock recovery, twrp (different versions), cf root so ik hoped it would flash CWM, different stock roms... Nothing wakes up this phone.
I'm going to try some stuff now. I'll keep you posted!
---------- Post added at 06:51 PM ---------- Previous post was at 06:20 PM ----------
AKdballs said:
I've been there with my S6 Edge...only a week ago while I was installing LineageOS. I was feeling pretty hopeless for awhile but installing a custom ROM got my phone to the point where it was usable again. I'm still burning through firmware variations from sammobile in search of a better modem but at least I got it working again. Odin is your friend.
Click to expand...
Click to collapse
How did you flash that rom when you couldn't get in recovery?
liobeir said:
Ow believe me I have tried this. I tried stock recovery, twrp (different versions), cf root so ik hoped it would flash CWM, different stock roms... Nothing wakes up this phone.
I'm going to try some stuff now. I'll keep you posted!
Click to expand...
Click to collapse
I thought I was done for last week when I flashed a package from Sammobile that my phone didn't like and it resulted in Error message from Odin. After that, download mode showed up as wrecked and said to use Smartswitch to enter emergency recovery mode. I tried a few versions of Smartswitch but they all kept saying my device was unsupported. I went to sleep feeling pretty lousy.
The next day I started fresh and had a few more packages from Sammobile to try. Even with the message about "emergency recovery mode", I was able to install a new Sammobile package using Odin. That replaced modem, system, bootloader, everything the phone needed. Except the phone was stuck in a bootloop and kept restarting every time it go to the "installing android" part of the boot process. At that point I shut the phone down and installed the latest TWRP recovery, booted into recovery, and transferred my ROMs + GApps onto it and then installed them following the ROM's installation instructions. It was pretty hairy for awhile but my persistence paid off and now it works again. Hopefully you get yours working.
What do you mean "nothing wakes up this phone" does it hang at a particular part?
How did you flash that rom when you couldn't get in recovery?
Click to expand...
Click to collapse
I don't think you can. You need to install TWRP recovery in download mode before you can flash ROMs. Is that what you're having problems with?
AKdballs said:
I thought I was done for last week when I flashed a package from Sammobile that my phone didn't like and it resulted in Error message from Odin. After that, download mode showed up as wrecked and said to use Smartswitch to enter emergency recovery mode. I tried a few versions of Smartswitch but they all kept saying my device was unsupported. I went to sleep feeling pretty lousy.
The next day I started fresh and had a few more packages from Sammobile to try. Even with the message about "emergency recovery mode", I was able to install a new Sammobile package using Odin. That replaced modem, system, bootloader, everything the phone needed. Except the phone was stuck in a bootloop and kept restarting every time it go to the "installing android" part of the boot process. At that point I shut the phone down and installed the latest TWRP recovery, booted into recovery, and transferred my ROMs + GApps onto it and then installed them following the ROM's installation instructions. It was pretty hairy for awhile but my persistence paid off and now it works again. Hopefully you get yours working.
What do you mean "nothing wakes up this phone" does it hang at a particular part?
I don't think you can. You need to install TWRP recovery in download mode before you can flash ROMs. Is that what you're having problems with?
Click to expand...
Click to collapse
Thanks for sticking up with me. We'll, the phone only boots in download mode. I flashed literally everything... From custom recoveries to stock roms, also had the smarts witch notification but smarts switch nor Kies doesn't fix the problem. I tried flashing recoveries, different versions, nothing. What I mean with waking up the phone... Well even after a successful Odin stock firmware flash, the phone doesn't boot by itself. Tried with the auto reboot ticked off but... Yeah... The phone only boots in download mode. But in download mode I see that it says CUSTOM BINARY,.... so... It flashes but... It's not booting. Not even getting a starting up screen that freezes... Nothing...all black... Only download mode. I just now tried converting a custom Rom zip to a tar file... Flashed it... Failed... Blablabla... This s6 is giving me a hard time! now, it' s a phone from a college that actually threw the phone in the garbage... But I retrieved it and I wanted to fix this s6. It's a good phone... It goes in download mode so.... That thought keeps me hopeful!
Again thanks for the support...
liobeir said:
Thanks for sticking up with me. We'll, the phone only boots in download mode. I flashed literally everything... From custom recoveries to stock roms, also had the smarts witch notification but smarts switch nor Kies doesn't fix the problem. I tried flashing recoveries, different versions, nothing. What I mean with waking up the phone... Well even after a successful Odin stock firmware flash, the phone doesn't boot by itself. Tried with the auto reboot ticked off but... Yeah... The phone only boots in download mode. But in download mode I see that it says CUSTOM BINARY,.... so... It flashes but... It's not booting. Not even getting a starting up screen that freezes... Nothing...all black... Only download mode. I just now tried converting a custom Rom zip to a tar file... Flashed it... Failed... Blablabla... This s6 is giving me a hard time! now, it' s a phone from a college that actually threw the phone in the garbage... But I retrieved it and I wanted to fix this s6. It's a good phone... It goes in download mode so.... That thought keeps me hopeful!
Again thanks for the support...
Click to expand...
Click to collapse
okay so, tried a couple more firmwares...they all pass in odin but not booting my phone. also not in recovery. tried flashing twrp and stuff but can't get it to boot! It doesn't hang on a screen. it just doesn't boot. only on download mode I get it to boot. Could this be a hardware problem?? I think not because it boots in download mode. Maybe try to flash bootloaders? Are there other recoveries? CWM, Philz touch?
Heya. I restored a full backup in TWRP, and I ended up bootlooping. I tried flashing stock firmware, and nothing has changed. I can access downloading mode, and I can flash TWRP and boot into that. Any help? I've tried everything I've came.
I used flashify to get twrp into recovery but it recovery looped and the only way i got out of it was to reflash root with odin. Hope that helps.
Is your device still rooted? I was getting set warranty bit: recovery. It just kept going back to twrp.
Sent from my SM-J700P using Tapatalk
Synz86 said:
I used flashify to get twrp into recovery but it recovery looped and the only way i got out of it was to reflash root with odin. Hope that helps.
Is your device still rooted? I was getting set warranty bit: recovery. It just kept going back to twrp.
Sent from my SM-J700P using Tapatalk
Click to expand...
Click to collapse
I'll try reflashing the root thing. Thanks.
EDIT: Does not work.
No problem, good luck. Let me know if it works, took me a couple times.
Sent from my SM-J700P using Tapatalk
I personally just had to reflash stock boot.img in odin when i got my bootloop and all was well
where can i download the stockl firmware for the boost mobile variant. I am in a bootloop here and have tried everything . I need the stock firmware so i can flash it via odin.
Having the same problem!
I rooted, flashed twrp, and Xposed successfully and made a complete backup. I got a little excessive with my debloating, so I tried to restore my nandroid backup with twrp.. Been bootlooped ever since. I tried flashing the stock boot, recovery, and rom with odin. Nothing works. The best result I can get is when I use Odin to flash stock firmware, then flash the chainfire autoroot. If I do that, it still bootloops, but it gets all the way to the "optimizing apps" screen... If I don't flash the autoroot, it loops after the virgin mobile logo. If I try to use stock rom, cf autoroot, and twrp, it goes all crazy at the initial Samsung screen and won't even loop. I've tried every combination I can think of. Maybe has something to do with the initial welcome/activation not being active? I would think the stock rom does have it enabled though.. HELP PLEASE! I have the 2016 variant from Virgin, 6.1.1
---------- Post added at 01:39 PM ---------- Previous post was at 01:35 PM ----------
DirtyPISTOLA said:
I personally just had to reflash stock boot.img in odin when i got my bootloop and all was well
Click to expand...
Click to collapse
Do you have the 2016 Virgin mobile variant? I know the 2015s have different firmware and seem to have no problems unbricking. Just curious
uberpyrit said:
I rooted, flashed twrp, and Xposed successfully and made a complete backup. I got a little excessive with my debloating, so I tried to restore my nandroid backup with twrp.. Been bootlooped ever since. I tried flashing the stock boot, recovery, and rom with odin. Nothing works. The best result I can get is when I use Odin to flash stock firmware, then flash the chainfire autoroot. If I do that, it still bootloops, but it gets all the way to the "optimizing apps" screen... If I don't flash the autoroot, it loops after the virgin mobile logo. If I try to use stock rom, cf autoroot, and twrp, it goes all crazy at the initial Samsung screen and won't even loop. I've tried every combination I can think of. Maybe has something to do with the initial welcome/activation not being active? I would think the stock rom does have it enabled though.. HELP PLEASE! I have the 2016 variant from Virgin, 6.1.1
---------- Post added at 01:39 PM ---------- Previous post was at 01:35 PM ----------
Do you have the 2016 Virgin mobile variant? I know the 2015s have different firmware and seem to have no problems unbricking. Just curious
Click to expand...
Click to collapse
You need an adb enabled boot.img and get a logcat on boot to know the reason of this problem
chucksaysblah said:
where can i download the stockl firmware for the boost mobile variant. I am in a bootloop here and have tried everything . I need the stock firmware so i can flash it via odin.
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-j7/how-to/sm-j700p-stock-recovery-stock-boot-t3423314
---------- Post added at 01:58 PM ---------- Previous post was at 01:52 PM ----------
messi2050 said:
You need an adb enabled boot.img and get a logcat on boot to know the reason of this problem
Click to expand...
Click to collapse
OK. Would the boot.img extracted from the stock rom be adb enabled? I'm on my way to work, so I'll have to wait till I get home to try.
uberpyrit said:
http://forum.xda-developers.com/galaxy-j7/how-to/sm-j700p-stock-recovery-stock-boot-t3423314
---------- Post added at 01:58 PM ---------- Previous post was at 01:52 PM ----------
OK. Would the boot.img extracted from the stock rom be adb enabled? I'm on my way to work, so I'll have to wait till I get home to try.
Click to expand...
Click to collapse
No It's not
uberpyrit said:
http://forum.xda-developers.com/galaxy-j7/how-to/sm-j700p-stock-recovery-stock-boot-t3423314
---------- Post added at 01:58 PM ---------- Previous post was at 01:52 PM ----------
OK. Would the boot.img extracted from the stock rom be adb enabled? I'm on my way to work, so I'll have to wait till I get home to try.
Click to expand...
Click to collapse
You need to go to CoffeeNAndroids thread here http://forum.xda-developers.com/galaxy-j7/development/adb-root-access-boot-image-custom-t3431590 to downkoad the adb enabled boot.img
DirtyPISTOLA said:
You need to go to CoffeeNAndroids thread here http://forum.xda-developers.com/galaxy-j7/development/adb-root-access-boot-image-custom-t3431590 to downkoad the adb enabled boot.img
Click to expand...
Click to collapse
Downloaded and flashed the adb-enabled boot.img, now doing the research on how to make it work so i can post my logcat output. ive never done this before so im having to research it(noob, sorry ) i dont want to waste anyones time, ill figure it out, but if someone has time and could post the steps to do it id be grateful. gonna read up on it till i figure out how to work it anyway, but in the meantime someone could be reading my logs.
uberpyrit said:
Downloaded and flashed the adb-enabled boot.img, now doing the research on how to make it work so i can post my logcat output. ive never done this before so im having to research it(noob, sorry ) i dont want to waste anyones time, ill figure it out, but if someone has time and could post the steps to do it id be grateful. gonna read up on it till i figure out how to work it anyway, but in the meantime someone could be reading my logs.
Click to expand...
Click to collapse
np we all were noobs in the beginning here are the steps
-connect your phone to pc
-download mini adb from here :
http://forum.xda-developers.com/showthread.php?t=2317790
-turn on your phone and while it's stuck at sam logo type in mini adb [adb logcat -v long > name of problem.txt}
-u will get a file in the mini adb folder upload it here so i can help you .
messi2050 said:
np we all were noobs in the beginning here are the steps
-connect your phone to pc
-download mini adb from here :
http://forum.xda-developers.com/showthread.php?t=2317790
-turn on your phone and while it's stuck at sam logo type in mini adb [adb logcat -v long > name of problem.txt}
-u will get a file in the mini adb folder upload it here so i can help you .
Click to expand...
Click to collapse
ok, so, every way i try this it isnt working. i flashed twrp so i could do a total wipe. then flashed the stock rom/firmware(J700PVPU1APB7.tar.md5). i flashed the adb-enabled boot.img and tried the logcat, it says waiting on device while the phone bootloops... when i flash cfautoroot and adb boot.img after rom flash, same thing. What am I doing wrong? Device drivers and adb drivers installed 2 weeks ago.
so, i just flashed stock rom:cfautoroot:adb boot.img:stock recovery, and it started to boot properly, ie: android updating apps to android starting, and a bunch of other stuff, then rebooted to bootloop.. farther than ive gotten so far.
---------- Post added at 11:07 PM ---------- Previous post was at 11:06 PM ----------
uberpyrit said:
ok, so, every way i try this it isnt working. i flashed twrp so i could do a total wipe. then flashed the stock rom/firmware(J700PVPU1APB7.tar.md5). i flashed the adb-enabled boot.img and tried the logcat, it says waiting on device while the phone bootloops... when i flash cfautoroot and adb boot.img after rom flash, same thing. What am I doing wrong? Device drivers and adb drivers installed 2 weeks ago.
so, i just flashed stock rom:cfautoroot:adb boot.img:stock recovery, and it started to boot properly, ie: android updating apps to android starting, and a bunch of other stuff, then rebooted to bootloop.. farther than ive gotten so far.
Click to expand...
Click to collapse
trying to recreate the process now...
uberpyrit said:
ok, so, every way i try this it isnt working. i flashed twrp so i could do a total wipe. then flashed the stock rom/firmware(J700PVPU1APB7.tar.md5). i flashed the adb-enabled boot.img and tried the logcat, it says waiting on device while the phone bootloops... when i flash cfautoroot and adb boot.img after rom flash, same thing. What am I doing wrong? Device drivers and adb drivers installed 2 weeks ago.
so, i just flashed stock rom:cfautoroot:adb boot.img:stock recovery, and it started to boot properly, ie: android updating apps to android starting, and a bunch of other stuff, then rebooted to bootloop.. farther than ive gotten so far.
---------- Post added at 11:07 PM ---------- Previous post was at 11:06 PM ----------
trying to recreate the process now...
Click to expand...
Click to collapse
You didn't did anything wrong , it's coffenandroid adb enabled is not working correctly , now try to flash stock recovery as i heard that twrp cause bootloop on j700p
messi2050 said:
No It's not
Click to expand...
Click to collapse
Hey messie,
I have somehow switched the variant of my boost j7 when I was rebuilding it with wifi tethering anyways since I did that my phone is on xas which is Australia I believe and it was working fine even on that variant until I put twrp on it and not even the stock boost firmware has fixed it I do have a backup before the variant was changed that was made with FlashFire but the twrp backup FlashFire makes by default doesn't work and all it does it boot loop over and over and sometimes it will say it is optimizing apps sometumes but doesn't ever load it just reboots and repeats the same thing I tried doing a complete wipe in twrp and tried ur debloated firmware which was very similar to the project I was working on as well as a cm port. I can't go any further on my projects until I can get functionality outta the phone again is there maybe a way I could load FlashFire in twrp as I have root and adb working fully or it there other stuff I could do in adb to fix this I even tried Making the csc only for BST instead of XAS but no go it had no effect
Starchild2k said:
Hey messie,
I have somehow switched the variant of my boost j7 when I was rebuilding it with wifi tethering anyways since I did that my phone is on xas which is Australia I believe and it was working fine even on that variant until I put twrp on it and not even the stock boost firmware has fixed it I do have a backup before the variant was changed that was made with FlashFire but the twrp backup FlashFire makes by default doesn't work and all it does it boot loop over and over and sometimes it will say it is optimizing apps sometumes but doesn't ever load it just reboots and repeats the same thing I tried doing a complete wipe in twrp and tried ur debloated firmware which was very similar to the project I was working on as well as a cm port. I can't go any further on my projects until I can get functionality outta the phone again is there maybe a way I could load FlashFire in twrp as I have root and adb working fully or it there other stuff I could do in adb to fix this I even tried Making the csc only for BST instead of XAS but no go it had no effect
Click to expand...
Click to collapse
Hi
Although a logcat is needed to solve the problem , i believe that this happens because of the kernel security , i think that a permissive kernel is included in this file
http://www.mediafire.com/?u6skqbc4x5bo73p
If it's there flash it and you should have successful boot proces , good luck!
messi2050 said:
Hi
Although a logcat is needed to solve the problem , i believe that this happens because of the kernel security , i think that a permissive kernel is included in this file
http://www.mediafire.com/?u6skqbc4x5bo73p
If it's there flash it and you should have successful boot proces , good luck!
Click to expand...
Click to collapse
Thanx Messi I am going to try it now
messi2050 said:
np we all were noobs in the beginning here are the steps
-connect your phone to pc
-download mini adb from here :
http://forum.xda-developers.com/showthread.php?t=2317790
-turn on your phone and while it's stuck at sam logo type in mini adb [adb logcat -v long > name of problem.txt}
-u will get a file in the mini adb folder upload it here so i can help you .
Click to expand...
Click to collapse
im still working on getting the logs, nothing seems to make the phone readable to logcat. it just says waiting for device..
Starchild2k said:
Thanx Messi I am going to try it now
Click to expand...
Click to collapse
np , tell me if it works for you
---------- Post added at 06:41 PM ---------- Previous post was at 06:39 PM ----------
uberpyrit said:
im still working on getting the logs, nothing seems to make the phone readable to logcat. it just says waiting for device..
Click to expand...
Click to collapse
I'm going to make one and upload it
Hey,
So yesterday I decided to flash the BTU Nougat 7.0 firmware to my EE S7 and all went well and the device booted normally, after this I tried to install TWRP onto my device which also went well, I installed the no-verify zip (or whatever it's called) and tried to boot the phone and I was just greeted with the flashing Samsung logo for an hour, after this I used Odin to flash my phone back my phone to the BTU nougat ROM and everything was fine, later I tried to use CF-Auto-Root which once again resulted in the flashing Samsung logo, I also tried wiping my data with TWRP and booting but to no use, same error occurred. Can anyone help, really I only need TWRP as I just want Google assistant (Yes I know, probably not worth tripping the KNOX for but I want it) and for this I just need to install a zip file.
Thanks!
EDIT: Fully resolved, just installed the Superman ROM and all is well. Thanks for the help!
Using the latest version of ODIN?
Any older than 3.12.3 cause problems
*Detection* said:
Using the latest version of ODIN?
Any older than 3.12.3 cause problems
Click to expand...
Click to collapse
Yeah I'm using 3.12.3
tbh to make things less hassle download any custom roms avail and used it. i gave up when i had the same issues as yours or maybe slightly worse losing my IMEI and baseband too. did install twrp to the cm14.1 rom and now using superman rom's everything was fine root is there too.
---------- Post added at 06:12 AM ---------- Previous post was at 06:05 AM ----------
but if you still insist on using the stock rom with just root what i can suggest u to do is turn off that oem lock in the settings and enable usb debugging. 1) Odin flash your twrp.zip files 2) Download supersu.zip or any rootable zip files 3) and extra modifications/tweaks you wanna add in such as the no-verify thingy 4) Always download your stock original firmware in case you messed it up.
MxFadzil92 said:
tbh to make things less hassle download any custom roms avail and used it. i gave up when i had the same issues as yours or maybe slightly worse losing my IMEI and baseband too. did install twrp to the cm14.1 rom and now using superman rom's everything was fine root is there too.
---------- Post added at 06:12 AM ---------- Previous post was at 06:05 AM ----------
but if you still insist on using the stock rom with just root what i can suggest u to do is turn off that oem lock in the settings and enable usb debugging. 1) Odin flash your twrp.zip files 2) Download supersu.zip or any rootable zip files 3) and extra modifications/tweaks you wanna add in such as the no-verify thingy 4) Always download your stock original firmware in case you messed it up.
Click to expand...
Click to collapse
Thanks for the tip mate, I'll have a look at some custom ROMs for my phone tomorrow, I used to use CM14 on my s5 so CM shall be my first choice I think
did you try formating data in twrp?
you will loose your data but that should fix it.
munchy_cool said:
did you try formating data in twrp?
you will loose your data but that should fix it.
Click to expand...
Click to collapse
Yeah I've already tired that