Hi all,
I have an older Peugeot 307CC (2004) with VANbus system and want to use the SWC buttons.
Does anyone knows how to wire this to my MTCD radio?
This is the pinout of the Peug:
http://elektrotanya.com/blaupunkt_vdo_rd3-1_pu-2471a_pinout.pdf/download.html
I think the A1 and A2 should go to key1 and key2. But try by yourself
Enviado desde mi D6603 mediante Tapatalk
OK, will try.
I'm just affraid I'll damage the VANbus if connected wrong...
Related
Hi all, I got a bricked unit from bad flash.. After research the only method is replacing motherboard.
Just ordered a motherboard unit and want to install on my tf300t... My question is : are the any guide? Or hint to disambled it?
Enviado desde mi GT-I9505 usando Tapatalk 2
-Zork- said:
Hi all, I got a bricked unit from bad flash.. After research the only method is replacing motherboard.
Just ordered a motherboard unit and want to install on my tf300t... My question is : are the any guide? Or hint to disambled it?
Enviado desde mi GT-I9505 usando Tapatalk 2
Click to expand...
Click to collapse
hi there, did you replace your motherboard? im on the same boat here. Bricked TF300t.
XtriFe said:
hi there, did you replace your motherboard? im on the same boat here. Bricked TF300t.
Click to expand...
Click to collapse
try this
http://forum.xda-developers.com/showthread.php?t=2368372
huebinger said:
try this
http://forum.xda-developers.com/showthread.php?t=2368372
Click to expand...
Click to collapse
hello
Good friends, after I have my Asus TF300T Briked, I decided to buy a board,
unfortunately still having trouble, Here it is connecting the tablet already have fastboot etc ...
But something very strange happening to me this ...
The tablet only connects, but only shows the screen if it is embedded in the keyboard, and the keyboard do not write ...
The tablet was bought in europe but the board and the U.S. ...
Suggestions?
thank you
hi my asus tf300t brick and i am buy new motherboard bot on this motherboard dont hack android how i need setup android in the new motherboard
Help me unlock LTE BAND 20 (800MHZ) on mi 4i
Hello i wil try to unlock the Band 20 on the mi 4i.
but i dont have driver for the modem to open with the QPST tool.
did some one already tried to unlock this Band?
there many devices using the same prozessors an they can LTE 800 MHZ!
Hope some one can help me!
I tried, but I think there isn't drivers for our device.
Enviado desde mi MI 4i mediante Tapatalk
rojorojorojo said:
I tried, but I think there isn't drivers for our device.
Enviado desde mi MI 4i mediante Tapatalk
Click to expand...
Click to collapse
Hello, i tried and found a HTC modified modem driver, but it doesnt helps you to unlock the LTE 800MHz _(Band 20) for mi4i
if you want you kan chek it here (german)
mi-forum . eu
masa_ru said:
Hello, i tried and found a HTC modified modem driver, but it doesnt helps you to unlock the LTE 800MHz _(Band 20) for mi4i
if you want you kan chek it here (german)
mi-forum . eu
Click to expand...
Click to collapse
Can you post the link, please?
Enviado desde mi MI 4i mediante Tapatalk
rojorojorojo said:
Can you post the link, please?
Enviado desde mi MI 4i mediante Tapatalk
Click to expand...
Click to collapse
Hello aim new user i have to post 10 posts to be able post posts whit liks inside )))
http://mi-forum.eu/viewtopic.php?f=21&t=515&hilit=LTE+800&start=10#p3189
Enviado desde mi MI 4i mediante Tapatalk
The first we need to know is how to enter diag mode, in miui seems to be *#*#717717#*#*. I'm on cm12.1 and that doesn't work.
I think our phone only support band 40,
My be our device hardware is incompatible for band 20.
but if somebody finds a way to unlock then it would be great.
How about this thread? http://forum.xda-developers.com/showthread.php?t=2871269
Unlock all bands of your Qualcomm device! Use your phone globally! No bs!
People are reporting they made it to unlock lte bands
Sent from my Mi 4i using XDA Free mobile app
rojorojorojo said:
The first we need to know is how to enter diag mode, in miui seems to be *#*#717717#*#*. I'm on cm12.1 and that doesn't work.
Click to expand...
Click to collapse
doc_v15 said:
How about this thread? http://forum.xda-developers.com/showthread.php?t=2871269
Unlock all bands of your Qualcomm device! Use your phone globally! No bs!
People are reporting they made it to unlock lte bands
Sent from my Mi 4i using XDA Free mobile app
Click to expand...
Click to collapse
Have any1 tried this ?
*#*#717717#*#* works on latest MIUI 7.3.1.0 ---> "Diag USB port enable"
Tried with HTC drivers.
No lock with comunication VIA USB COM port 4 now
800 MHz hardware
Dear Sir/Madam,
Thank you for your support and attention towards XiaoMi.
Please kindly note that we haven't released European version phones on http://www.mi.com/en/store yet,
and the phones released in other markets/countries might have network compability issues if you use them in Europe.
Please do noted that we can't change the phone's network through any software update,
as it's controlled by the hardware on motherboard, kindly understand that it's fixed.
Sorry again for the inconvenience brought to you, but you can pay attention to the future release of phones in European market.
We appreciate your understanding and cooperation.
If you have any further question, please feel free to contact us.
May you experience a lifetime of love, happiness and joy!
Best regards,
Emma
XiaoMi European Customer Service Center
Website: http://www.mi.com/en/store/
E-mail: [email protected]
“Always believe that something wonderful is about to happen”.
Can anyone confirm?
I supposed my IMEI will be changed as a result - which should not be a problem... correct?
If you are trying to suggest non-hardware fix, thanks in advance but you may want to check out my story here first... https://forum.xda-developers.com/mate-8/general/advice-to-owners-enable-bootloader-t3573744
I have to replace the motherboard but I don't find it, have you a place to buy one? Thanks in advance.
Federico
Enviado desde mi LG-H635 mediante Tapatalk
Hello,
I buy a erisin, I don't no what model is, but you can check in the photos.
I have a problem with bluetooth, I par th phone with the radio, after I use the car more then 5x, the radio stops pairing with the mobile phone, and to work again I have to click in the reset button. How can I fix this? Install a new rom? Update de MCU?
Thanks
cassapo said:
Hello,
I buy a erisin, I don't no what model is, but you can check in the photos.
I have a problem with bluetooth, I par th phone with the radio, after I use the car more then 5x, the radio stops pairing with the mobile phone, and to work again I have to click in the reset button. How can I fix this? Install a new rom? Update de MCU?
Thanks
Click to expand...
Click to collapse
I can't distinguish anything on your photos
Giving us the brand does not give us any information.....
Please give us the manufacturer....if you don't know...you must read a little bit the information on forums prior to ask
Enviado desde mi SM-G950F mediante Tapatalk
Erisin:
MODEL: A-MEDIA AUTO (1024x600 S);
ANDROID VERSION: 6.0.1
KERNEL VERSION: 3.10.0
COMPILATION NUMBER: px5-userdebug 6.0.1 MXC89L user.hct.20170328
MCU VERSION: MTCD_KGL_V2.43_4
What more information you need to help me?
thanks
https://youtu.be/jdeicuVH80Y
Today I make this video to show my problem.
ERISIN ES6301F
cassapo said:
https://youtu.be/jdeicuVH80Y
Today I make this video to show my problem.
ERISIN ES6301F
Click to expand...
Click to collapse
PekeMM has a process that worked for him:
https://forum.xda-developers.com/android-auto/mtcd-android-head-units-general/mtcd-e-bt-search-connection-issues-t3753383
Hi.
I have a radio Hizpo Px3 rk3188. I want to install a cfw but I am a novice with this type of equipment and I do not do the procedure.
At first I need to root and can not find the files or the procedure of how to do it and I'm going crazy.
Can someone help me and explain how to do it please?
Thank you
Enviado desde mi MI 6 mediante Tapatalk
There is no need to fit it first. Just read the manual, it's very well explained on the topic of the malaysk firmware.
Verstuurd vanaf mijn Z2 Pro met Tapatalk
how I said before, I'm a novice, I do not know what malaysk is and I do not know where that manual is, I can not find anything
Enviado desde mi MI 6 mediante Tapatalk
https://r.tapatalk.com/shareLink?ur...share_tid=3741583&share_fid=3793&share_type=t
Try that topic
Verstuurd vanaf mijn Z2 Pro met Tapatalk