Related
So my cousin had the this tablet she hadn't us for a while and she asked to to fix it up. Root it put some apps on it blah blah blah. So i rooted it using this: http://forum.xda-developers.com/showthread.php?t=1681155/
Everything was fine and it went smoothly, I had root access, TWRP recovery that it came with and it was working fine.
I wanted to put a ROM on it for my cousin to match her phone so I found this: http://forum.xda-developers.com/showthread.php?t=2584265
So, I flashed the Rom and it was fine. Then I flashed the Gapps and it said that the system partion didn't have enough space.
Here is where I screwed up (I think). TWRP said that I lost root access and i had to fix it BUT i had to swipe a bar at the bottom to fix it. My dumbass pressed the button in the middle of the screen which was to ignore it. I didn't see what i was doing and i messed up
So I lost root or something and when i turn on the device and try to boot into recovery by holding the Power + Vol Down keys it does not work!
Now I have a tablet with android 4.4.3, no Gapps, no root, no recovery. I have tried to factory reset it but the one in settings do not work.
I'm stuck and I need help from someone smarter. Thank you for anything.
Id start again, sounds like something in recovery got messed up if it thinks the system partition is not big enough for gapps
Flash TWRP with Easyflasher
http://forum.xda-developers.com/showthread.php?t=1688012
Download ROM & Gapps to MicroSD Card
I suggest KatKiss #29 & Gapps from this link
http://forum.xda-developers.com/showthread.php?t=2592890
Factory reset & Wipe everything except External Storage from TWRP
Flash ROM
Flash Gapps
Wipe Cache & Dalvik Cache
Reboot
Nothing more nothing less is needed, so if it doesn't work by doing the above, there are other problems
ok so i installed the drivers it easyflasher was asking for and now it asks whether the device is SBK1 or SBK2, how do i find out whether the device is B70 or above... I feel dumb again... It also asks if its in APX mode... i need help again
ok i figured out the easyflasher and i get the recovery but, when im done flashing all the files and boot the device it says that i have to repair root, like before and even if i say to do so i lose the recovery every time meaning i have to go and put the recovery back onto it and do everything again.....
alrighty so ive got the recovery to stick, and i got the KitKatKiss rom which is actually really nice, however i don't have root, i keep trying to flash the supersu file but it does not work. thanks for everything already. it would be nice to have it rooted.......
RoughRunner said:
alrighty so ive got the recovery to stick, and i got the KitKatKiss rom which is actually really nice, however i don't have root, i keep trying to flash the supersu file but it does not work. thanks for everything already. it would be nice to have it rooted.......
Click to expand...
Click to collapse
KatKiss is already rooted by default, you should not flash an additionnal supersu zip.
Just Flash the rom then gapps from the KatKiss thread
wipe cache + dalvik-cache
then reboot.
If you're coming from another rom version, a full wipe / factory reset is recommended before flashing too.
RoughRunner said:
alrighty so ive got the recovery to stick, and i got the KitKatKiss rom which is actually really nice, however i don't have root, i keep trying to flash the supersu file but it does not work. thanks for everything already. it would be nice to have it rooted.......
Click to expand...
Click to collapse
QUOTE:
Nothing more nothing less is needed, so if it doesn't work by doing the above, there are other problems
--
As Tim says, and as I said, if you had just followed my instructions and not tried adding your own section of the process, you would have had no problems
timduru said:
KatKiss is already rooted by default, you should not flash an additionnal supersu zip.
Just Flash the rom then gapps from the KatKiss thread
wipe cache + dalvik-cache
then reboot.
If you're coming from another rom version, a full wipe / factory reset is recommended before flashing too.
Click to expand...
Click to collapse
ok thanks theres the problem all fixed thanks
Hi mates.
So, I was running CM12 nightlies on my phone but it began to get slow and buggy.
I decided to go back to stock 4.4.4, ans then flash CM11 on dit
I did full wipe (data, system, cache, dalvik), installed stock 4.4.4 (latest official build)
Then i downloaded CM installer but couldn't get it to work.
So I used Nexus foot toolkit on PC, but the flashing process went wrong somehow, just when it reboots the phone to recovery, nothing happened, no flashing process whatsoever.
From this moment, my problem had appeared
So I rebooted normally, downloaded CM11 and I was unable to flash it. Signature check failed.
I've tried OTA 5.0.1, not working either, same error.
So I am currently running latest 4.4.4 without any problem, but even after an other full wipe I'm not able to flash anything, custom or stock. My recovery is the latest TWRP from the Google play app.
Could you please help me ? I don't mind wiping my phone, and I'd prefer a "no PC" solution but I still can use a PC if needed.
Thanks
visclo49 said:
Hi mates.
So, I was running CM12 nightlies on my phone but it began to get slow and buggy.
I decided to go back to stock 4.4.4, ans then flash CM11 on dit
I did full wipe (data, system, cache, dalvik), installed stock 4.4.4 (latest official build)
Then i downloaded CM installer but couldn't get it to work.
So I used Nexus foot toolkit on PC, but the flashing process went wrong somehow, just when it reboots the phone to recovery, nothing happened, no flashing process whatsoever.
From this moment, my problem had appeared
So I rebooted normally, downloaded CM11 and I was unable to flash it. Signature check failed.
I've tried OTA 5.0.1, not working either, same error.
So I am currently running latest 4.4.4 without any problem, but even after an other full wipe I'm not able to flash anything, custom or stock. My recovery is the latest TWRP from the Google play app.
Could you please help me ? I don't mind wiping my phone, and I'd prefer a "no PC" solution but I still can use a PC if needed.
Thanks
Click to expand...
Click to collapse
stop using toolkits, learn something for a change
http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
Hello!
I bought a Moto G falcon 2 mounts ago. Running CM12 everything was good.
I flashed a cm12.1, then my falcon started to crash randomly (mostly because i didn't flash the proper Gapps). So I wanted to revert back to KitKat to make a proper flash since the beginning, wich was ofc a bad idea. So I flashed the 4.4.4 stock ROM and now am in soft brick. I'm stuck at boot logo (The boot loader unlocked one). I tried to flash a stock 5.1 ROM (GPE_5.1_XT1032_LMY47M.M001_CFC.xml.zip) without any success.
My bootloader is updated to 4118, I can boot in recovery/bootloader.
Any ideas how to boot again? Thank you!
I_HAVE_NO_IDEA said:
Hello!
I bought a Moto G falcon 2 mounts ago. Running CM12 everything was good.
I flashed a cm12.1, then my falcon started to crash randomly (mostly because i didn't flash the proper Gapps). So I wanted to revert back to KitKat to make a proper flash since the beginning, wich was ofc a bad idea. So I flashed the 4.4.4 stock ROM and now am in soft brick. I'm stuck at boot logo (The boot loader unlocked one). I tried to flash a stock 5.1 ROM (GPE_5.1_XT1032_LMY47M.M001_CFC.xml.zip) without any success.
My bootloader is updated to 4118, I can boot in recovery/bootloader.
Any ideas how to boot again? Thank you!
Click to expand...
Click to collapse
Well if you can boot into the recovery and if its custom (TWRP) wipe all the data on your phone. Second I would try to flash a ROM onto your device such as Resurrection Remix and see if that works. Update on your progress.
Thank you for your answer.
I tried to wipe data/factory reset, but twrp throws some error messages.
Unable to mount /data, /cache, /system and all derivatives.
I tried to flash a ROM through twrp but I think I can't because of that partition mess. I can't adb push to /sdcard, or sideload (seems to require /data).
I think that my issue is that I flashed the 4.4.4 gpt.bin, and I shouldn't have. If I'm right, is there any way to recover from this?
I_HAVE_NO_IDEA said:
Thank you for your answer.
I tried to wipe data/factory reset, but twrp throws some error messages.
Unable to mount /data, /cache, /system and all derivatives.
I tried to flash a ROM through twrp but I think I can't because of that partition mess. I can't adb push to /sdcard, or sideload (seems to require /data).
I think that my issue is that I flashed the 4.4.4 gpt.bin, and I shouldn't have. If I'm right, is there any way to recover from this?
Click to expand...
Click to collapse
I crashed my S3 using camera on old cm12.1 and got into loop with services stopped. Try and D/L the new 4 22 and Slim ggaps 20150422 wipe chache and devik and reinstall cm and ggaps get it working this is what I did but I haven't read any info except to find a file for Odin but don't think you can use Odin. It be nice to have stable way to downgrade. The flash will hopefully get your phone working.
vtails said:
I crashed my S3 using camera on old cm12.1 and got into loop with services stopped. Try and D/L the new 4 22 and Slim ggaps 20150422 wipe chache and devik and reinstall cm and ggaps get it working this is what I did but I haven't read any info except to find a file for Odin but don't think you can use Odin. It be nice to have stable way to downgrade. The flash will hopefully get your phone working.
Click to expand...
Click to collapse
Thank you. But I can't flash a cm12.1 atm (see my post below). I can only flash through fastboot. I'm not sure I properly understood you, what do you call 4 22 ?
FYI I managed to boot again. Here's what I did:
Flash a 5.x ROM, try to boot to let the system make partitions and stuff (I think)
Boot in TWRP and saw that system and cache were not mountable, so I wiped them.
Flash a cm12.1 (+ Gapps) and here we go!
Thank you for your help!
[SOLVED ]"Patching system image unconditionally..." - can't install CM at all.
my device (moto G (falcon) XT1032) is a GPE device.
in the last 2 days i tried to install CM 13 on my device.
i tried 3 different recoveries** - CWM, TWRP and CM recovery - to install cm-13.0-20160206-NIGHTLY-falcon (and yes, i checked before flashing, the SHA1).
in all those tryouts i always get into the sentence in the headline - Patching system image unconditionally... - and it just stays there forever.
one time i waited 40 minutes, and it still stayed on this message, and do nothing.
every time before flashing the rom, i wiped the device (dalvik cache, cache, system, Data).
i also try to flash the latest snapshot (cm-12.1-20151117-SNAPSHOT-YOG7DAO1K9-falcon) because i thought maybe there is a problem with the latest nightly.
i still stuck in the same stage(Patching system image unconditionally...).
i also try to flash stock rom 4.4.4 from motorola (from here: http://goo.gl/xAomMi) which succeeded, and then wipe device(factory reset and wipe dalvik cache, cache, system, Data) and install again cm-13.0-20160206-NIGHTLY-falcon, and it also didn't work.
i'm still get into the same message and stay there forever.
thanks for any help
** EDIT: http://forum.xda-developers.com/showpost.php?p=65237469&postcount=3
papandreoos said:
my device (moto G (falcon) XT1032) is a GPE device.
in the last 2 days i tried to install CM 13 on my device.
i tried 3 different recoveries - CWM, TWRP and CM recovery - to install cm-13.0-20160206-NIGHTLY-falcon (and yes, i checked before flashing, the SHA1).
in all those tryouts i always get into the sentence in the headline - Patching system image unconditionally... - and it just stays there forever.
one time i waited 40 minutes, and it still stayed on this message, and do nothing.
every time before flashing the rom, i wiped the device (dalvik cache, cache, system, Data).
i also try to flash the latest snapshot (cm-12.1-20151117-SNAPSHOT-YOG7DAO1K9-falcon) because i thought maybe there is a problem with the latest nightly.
i still stuck in the same stage(Patching system image unconditionally...).
i also try to flash stock rom 4.4.4 from motorola (from here: http://goo.gl/xAomMi) which succeeded, and then wipe device(factory reset and wipe dalvik cache, cache, system, Data) and install again cm-13.0-20160206-NIGHTLY-falcon, and it also didn't work.
i'm still get into the same message and stay there forever.
thanks for any help
Click to expand...
Click to collapse
Use Philz recovery and make sure you unlocked boot loader cleanly, if this Doesn't help try to flash some other ROM.
Best Of Luck
i also used philz_touch_6.58.7-falcon recovery.
still i got into the same problem i described in my first post.
p.s.
i forgot to mention this recovery in my first post, but after you suggested it, i remembered i used it already.
papandreoos said:
i also used philz_touch_6.58.7-falcon recovery.
still i got into the same problem i described in my first post.
p.s.
i forgot to mention this recovery in my first post, but after you suggested it, i remembered i used it already.
Click to expand...
Click to collapse
Try installing some other ROM.
[email protected] said:
Try installing some other ROM.
Click to expand...
Click to collapse
do you have a suggestion for good ROM (everything works) for moto g (xt1032), which has marshmallow in it?
papandreoos said:
do you have a suggestion for good ROM (everything works) for moto g (xt1032), which has marshmallow in it?
Click to expand...
Click to collapse
May be this helps
http://forum.xda-developers.com/showthread.php?t=3284323
Or
http://forum.xda-developers.com/showthread.php?t=3250449
---------- Post added at 01:17 AM ---------- Previous post was at 01:14 AM ----------
If you can't install this flash stock and check if you can flash any Zip (try SuperSU zip in my word) if this ain't successful try to type unlock boot loader commands again.
Best of luck.
[email protected] said:
May be this helps
http://forum.xda-developers.com/showthread.php?t=3284323
Or
http://forum.xda-developers.com/showthread.php?t=3250449
---------- Post added at 01:17 AM ---------- Previous post was at 01:14 AM ----------
If you can't install this flash stock and check if you can flash any Zip (try SuperSU zip in my word) if this ain't successful try to type unlock boot loader commands again.
Best of luck.
Click to expand...
Click to collapse
i tried now the AOSP rom in one of your links.
i wiped cache, dalvik cache, system and data and then continue to install the rom, but again it stuck in the same line as before and does nothing.
papandreoos said:
i tried now the AOSP rom in one of your links.
i wiped cache, dalvik cache, system and data and then continue to install the rom, but again it stuck in the same line as before and does nothing.
Click to expand...
Click to collapse
Flash back to stock and try to flash supersu zip from here if this doesn't work the problem must be while unlocking bootloader ,anyways was bootloader unlocked normally or you had any problems ?
https://download.chainfire.eu/696/SuperSU/
Flash via fast boot not some other flash able Zip
Best of luck.
[email protected] said:
Flash back to stock and try to flash supersu zip from here if this doesn't work the problem must be while unlocking bootloader ,anyways was bootloader unlocked normally or you had any problems ?
https://download.chainfire.eu/696/SuperSU/
Flash via fast boot not some other flash able Zip
Best of luck.
Click to expand...
Click to collapse
my bootloader is unlocked already.
before i tried to flash CM couple of days ago, i follow steps from CM wiki, and part of them is to unlock the bootloader.
here are the orders i followed(although it's for a different device (moto g 4g)), it worked great:
https://wiki.cyanogenmod.org/w/Install_CM_for_peregrine#Unlocking_the_device
if i get into fastboot mode (volume down + power) it tells me in yellow line: Device is UNLOCKED. Status Code: 3.
i also have root access.
papandreoos said:
my bootloader is unlocked already.
before i tried to flash CM couple of days ago, i follow steps from CM wiki, and part of them is to unlock the bootloader.
here are the orders i followed(although it's for a different device (moto g 4g)), it worked great:
https://wiki.cyanogenmod.org/w/Install_CM_for_peregrine#Unlocking_the_device
if i get into fastboot mode (volume down + power) it tells me in yellow line: Device is UNLOCKED. Status Code: 3.
i also have root access.
Click to expand...
Click to collapse
The metod sound the same...........Have you tried to flash stock ROM via Fast boot again?
[email protected] said:
The metod sound the same...........Have you tried to flash stock ROM via Fast boot again?
Click to expand...
Click to collapse
i forgot to mention that after every failure of flashing, i always get back to lollipop 5.1 GPE version with this helpfull tool:
http://forum.xda-developers.com/moto-g/general/gpe-lollipop-5-1-1click-installer-t3075522
so everything is OK in my phone.
i'm just frustrated i can't install newer OS.
papandreoos said:
i forgot to mention that after every failure of flashing, i always get back to lollipop 5.1 GPE version with this helpfull tool:
http://forum.xda-developers.com/moto-g/general/gpe-lollipop-5-1-1click-installer-t3075522
so everything is OK in my phone.
i'm just frustrated i can't install newer OS.
Click to expand...
Click to collapse
Try to flash KitKat for a while then flash CM 11 then any CM 12 then CM 13 I have have an similar error, whenever I try to flash another ROM the data partition doesn't format and then I have to do is to flash KitKat Stock then CM 11 then CM 12 then CM 13 .
Best Of Luck this should work.
---------- Post added at 08:25 AM ---------- Previous post was at 08:16 AM ----------
The tool isn't a good Idea I use to make an bat file and not customized a bit file of firmware if you don't know what it is I will give it to you .
Here , download the untouched version and flash via Fast boot if not completed find KitKat version :-
http://www.gimmickmag.com/restore-moto-g-xt1032-xt1033-xt1034-back-stock-firmware/
If you can't find there wait for FileFactory server to come up again it has all firmwares
[email protected] said:
Here , download the untouched version and flash via Fast boot if not completed find KitKat version :-
http://www.gimmickmag.com/restore-moto-g-xt1032-xt1033-xt1034-back-stock-firmware/
If you can't find there wait for FileFactory server to come up again it has all firmwares
Click to expand...
Click to collapse
i flashed 4.4.4 stock from here:
http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-rom-collection-t2854688
i used the untouched version:
Retail EU 4.4.4 Stock ROM (Untouched) (457mb)
https://docs.google.com/uc?id=0B6RNTe4ygItBVFlwN2pqWmV1VXc&export=download
so far it's working.
i boot into the stock and it's 4.4.4.
the screen is flickering but it's stock 4.4.4.
now i'm gonna try flash this latest snapshot of CM11:
cm-11-20140504-SNAPSHOT-M6-falcon.zip
from here:
https://download.cyanogenmod.org/?device=falcon
i now into fastboot mode, installing TWRP 3.0.0.0:
fastboot flash recovery twrp-3.0.0.0-falcon.img
success!
get into recovery now.
sha1 verified.
copy CM11 into phone
i'm still on TWRP.
i now wipe data, cache, dalvik cache and system.
done.
now i'll try flash CM11
WOW!!!
after couple of seconds (maybe 30-40) it's done.
i reboot into CM11 without a problem (just the flickering screen again, but never mind. i'm not planing to stay in CM11).
the android version in latest CM11 is 4.4.2
now i'm gonna try to flash CM12
get into recovery again.
sha1 verified.
copy cm-12.1-20151117-SNAPSHOT-YOG7DAO1K9-falcon into device.
wiping data, cache, dalvik cache and system again.
flashing!
not working
i again stuck in " "Patching system image unconditionally..." forever.
(going back to GPE 5.1)
Flash via Fast Boot it might be the problem.
[email protected] said:
Flash via Fast Boot it might be the problem.
Click to expand...
Click to collapse
you mean "adb sideload rom.zip"?
if yes, i already did that and it was stopped in 47 percent and sometime in 45 percent.
it stays there forever.
papandreoos said:
you mean "adb sideload rom.zip"?
if yes, i already did that and it was stopped in 47 percent and sometime in 45 percent.
it stays there forever.
Click to expand...
Click to collapse
No Flash Stock KitKat From Firmware via boot loader .
i think i'll pass.
i already flash kitkat and after that CM11 and it didn't help me to get into CM13.
i'm tired of flashing and restoring again and again.
thanks a lot for your help
As you wish...
I followed your steps too and i am exactly facing your problems, i am stuck in "patching system image unconditionally"...
Hi!
A while back I had some issues with the phone, it was when I was supposed to boot it, it always took 2 tries. It always got stuck, then had to long press the lock key to hard reboot it, then it worked fine. This prevented me from doing a factory reset (in hope to fix (what I later found out was) a media rescan etc). Tried to root it, something happened and it wouldn't boot anymore. Yiti yata and the phone wouldn't boot. Finally I got it back to life with some guide on here and I used whatever 4.4.4 I downloaded.
The software wouldn't find any "normal" update phone updates, so I figured I would try Resurrection Remix 7.1.x (.2 I think it was). At first I got just that it failed with some 2.x twrp version. Updated to TWRP 3.1.x.x (3.1.1.0 if I guess). Now I got to know that it was a TZ error (ERROR 7) from TWRP. This happened to my "RR-N-v5.8.3-20170718-bacon-Official.zip" file. I managed to get around it by doing this: https://forum.xda-developers.com/showthread.php?t=2522762. So I could get this installed, sort of I think. The problem now was that it would show the very first oneplus boot screen for around 20 ish seconds, before it would reboot in a boot loop.
So I tried to install some other CM Lineage Os nightly thing (they said install that and then RR), but that didn't work either. This post was the one I donwloaded from (install this first, then RR should work).
I tried doing this both on TWRP 2.8.6.0 and 3.1.1.0 since I saw some post about the modem not being right from versions newer than 2.8.6.0.
Looking around a bit more I saw in some post someone talking about firmware..? Does this matter anything, also how is this different from the recovery or ROM? (new to this stuff)
In short, last working version of Android I had on there was 4.4.4 (think I followed this post). Using a Mac currently and have no problem with flashing, entering fastboot or recovery.
My procedure when I tried to install RR was:
Install the TWRP 3.1.1.0 or 2.8.6.0 (since I did it several times).
Wipe everything (Have nothing of value on the phone) cache, system, internal storage, dalvik and data. Also did a factory reset (from TWRP) before if that matters.
Copied RR and Gapps 7.1 ARM (not arm64) over.
Installed RR, wiped cache/dalvik. (or linear/cm (post above^^) when I tried that)
Installed Gapps, wiped cache/dalvik.
Boot loop.
Also tried with/without emptying cache/dalvik also chose to install both zips at once.
So can anyone clue in how I can proceed to get RR 7.1 onto my OPO? Any help is very much appreciated
I'm sorry if this wasn't the best post. Have an immense headache at the moment
wahlmat said:
Hi!
A while back I had some issues with the phone, it was when I was supposed to boot it, it always took 2 tries. It always got stuck, then had to long press the lock key to hard reboot it, then it worked fine. This prevented me from doing a factory reset (in hope to fix (what I later found out was) a media rescan etc). Tried to root it, something happened and it wouldn't boot anymore. Yiti yata and the phone wouldn't boot. Finally I got it back to life with some guide on here and I used whatever 4.4.4 I downloaded.
The software wouldn't find any "normal" update phone updates, so I figured I would try Resurrection Remix 7.1.x (.2 I think it was). At first I got just that it failed with some 2.x twrp version. Updated to TWRP 3.1.x.x (3.1.1.0 if I guess). Now I got to know that it was a TZ error (ERROR 7) from TWRP. This happened to my "RR-N-v5.8.3-20170718-bacon-Official.zip" file. I managed to get around it by doing this: https://forum.xda-developers.com/showthread.php?t=2522762. So I could get this installed, sort of I think. The problem now was that it would show the very first oneplus boot screen for around 20 ish seconds, before it would reboot in a boot loop.
So I tried to install some other CM Lineage Os nightly thing (they said install that and then RR), but that didn't work either. This post was the one I donwloaded from (install this first, then RR should work).
I tried doing this both on TWRP 2.8.6.0 and 3.1.1.0 since I saw some post about the modem not being right from versions newer than 2.8.6.0.
Looking around a bit more I saw in some post someone talking about firmware..? Does this matter anything, also how is this different from the recovery or ROM? (new to this stuff)
In short, last working version of Android I had on there was 4.4.4 (think I followed this post). Using a Mac currently and have no problem with flashing, entering fastboot or recovery.
My procedure when I tried to install RR was:
Install the TWRP 3.1.1.0 or 2.8.6.0 (since I did it several times).
Wipe everything (Have nothing of value on the phone) cache, system, internal storage, dalvik and data. Also did a factory reset (from TWRP) before if that matters.
Copied RR and Gapps 7.1 ARM (not arm64) over.
Installed RR, wiped cache/dalvik. (or linear/cm (post above^^) when I tried that)
Installed Gapps, wiped cache/dalvik.
Boot loop.
Also tried with/without emptying cache/dalvik also chose to install both zips at once.
So can anyone clue in how I can proceed to get RR 7.1 onto my OPO? Any help is very much appreciated
I'm sorry if this wasn't the best post. Have an immense headache at the moment
Click to expand...
Click to collapse
Calm down.
You're right about that firmware thing,that is the one causing issue when you're trying to flash RR 5.8.3 over KitKat.
This is because the firmware that kitkat comes with,is old and don't support newer android versions,that's because it is made for KitKat only.
Always use latest Twrp(https://dl.twrp.me/bacon/).
Make sure you don't edit any zip like what you did with the Rom zip earlier(devs don't post non-working zips),I'm sure you've a backup of your non-edited zip,if not,re-download the zip.
Now boot into latest twrp,wipe everything except internal storage.
Firmware: https://drive.google.com/file/d/0BxysuRdzsJeWeW9JbTNwaUJKb1E/view?usp=drivesdk
Flash the above zip,then without wiping anything flash rom zip(unedited) then flash google apps package(opengapps.org)(optional).
Reboot.It should boot fine now.
Good luck!
Mr.Ak said:
Calm down.
You're right about that firmware thing,that is the one causing issue when you're trying to flash RR 5.8.3 over KitKat.
This is because the firmware that kitkat comes with,is old and don't support newer android versions,that's because it is made for KitKat only.
Always use latest Twrp(Can't post links withing 10 posts apparently...).
Make sure you don't edit any zip like what you did with the Rom zip earlier(devs don't post non-working zips),I'm sure you've a backup of your non-edited zip,if not,re-download the zip.
Now boot into latest twrp,wipe everything except internal storage.
Firmware:
Flash the above zip,then without wiping anything flash rom zip(unedited) then flash google apps package(Can't post links withing 10 posts apparently...)(optional).
Reboot.It should boot fine now.
Good luck!
Click to expand...
Click to collapse
Thank you so much! Got it working on 1st try with what you provided! Seems like the firmware thing was the bad guy in this scenario. A little interest, what specifically is the firmware in this case? Either way, rocking RR now and I'm really grateful
wahlmat said:
Thank you so much! Got it working on 1st try with what you provided! Seems like the firmware thing was the bad guy in this scenario. A little interest, what specifically is the firmware in this case? Either way, rocking RR now and I'm really grateful
Click to expand...
Click to collapse
I'm glad you got it up and running.
Here are some FAQs:
What is a Firmware? What is Modem?
- Firmware is the whole package of proprietary partitions of your device, modem itself is a NON-HLOS file responsible for your device's communications over Wi-Fi, Mobile Networks and other such stuff.
So what is the difference between firmware and ROM then?
- Firmware is the responsible partition for IMEIs, the modemst partitions hold your IMEI, persist holds your Mac addresses etc.
ROM is only a combination of system.img and boot.img (kernel)
What to restore if I loose my IMEI?
- Both the modemst partitions (IMP: considering you took a backup of them before)
What is the default firmware? (default= firmware which comes with the latest CM/ LineageOS 14.1 weeklies)
- c6-00241
Thanks a lot, once again
Help!
I'm not sure of all the specifics on my oneplus one but I accidentally updated the wrong update from my nightly bacon.. it now is stuck in Boot Loop I can get to the fastboot screen (it gets stuck there too) and I can get to the recovery, etc (but it is not the usual screen with all the folders (it was rooted).. it is now just four options in Cyanogenmod recovery.. none work. I do not want to lose my data :crying: .. Sadly my techy is not available to save me! Please help this untechy Cali Girl! I've googled and researched and its still like a foreign language.. Thank you!!
HisMuse said:
I'm not sure of all the specifics on my oneplus one but I accidentally updated the wrong update from my nightly bacon.. it now is stuck in Boot Loop I can get to the fastboot screen (it gets stuck there too) and I can get to the recovery, etc (but it is not the usual screen with all the folders (it was rooted).. it is now just four options in Cyanogenmod recovery.. none work. I do not want to lose my data :crying: .. Sadly my techy is not available to save me! Please help this untechy Cali Girl! I've googled and researched and its still like a foreign language.. Thank you!!
Click to expand...
Click to collapse
I am not 100% sure, but I would say, boot into fastboot, flash something like TWRP recovery, then you will be able to access the device files from the recovery. Just reflashing the boot shouldn't mess up anything as far as I am concerned. After that (when you've grabbed all the files you want), flash the newest firmware the guy linked above and install your latest 7.0 ROM
wahlmat said:
I am not 100% sure, but I would say, boot into fastboot, flash something like TWRP recovery, then you will be able to access the device files from the recovery. Just reflashing the boot shouldn't mess up anything as far as I am concerned. After that (when you've grabbed all the files you want), flash the newest firmware the guy linked above and install your latest 7.0 ROM
Click to expand...
Click to collapse
I can get phone to fastboot but it just stays on the screen that says fastboot.. do I need a computer?
HisMuse said:
I can get phone to fastboot but it just stays on the screen that says fastboot.. do I need a computer?
Click to expand...
Click to collapse
Yes you do. You need that + some software. Check out some "install custom recovery oneplus one" guides, you should be able to find something. Are you on Mac or Windows?
Yes I'm on Windows 10.. I tried removing battery overnight as well .. its not boiling hot anymore but still stuck in bootloop.
HisMuse said:
Yes I'm on Windows 10.. I tried removing battery overnight as well .. its not boiling hot anymore but still stuck in bootloop.
Click to expand...
Click to collapse
Download the Samsung ADB driver or whatever it was called, then flash a new recovery for it. There are multiple guides for doing that. After that you should be able to transfer your files to your pc while being in recovery mode