I have a Moto G XT1032 (falcon 2013). I recently got it stuck on bootloader unlocked symbol, and managed to get it back on and working after completely wiping my phone and reinstalling the drivers via my pc.
When I did this, it was buggy and my phone wasn't working properly (lines appearing over my screen, icons glitching).
So, I decided to install a custom ROM. My phone reverted back to KitKat when I re-installed my drivers, so I had to go to Cyanogenmod 11, then update it to 12.1.
Now, I am on Cyanogenmod 12.1 and there is one problem. My sim card won't unlock. It says to put in the SIM PIN, and I do (which is definitely correct, I checked with my provider, Tesco Mobile). And it says that I cannot unlock the SIM. Then, my provider sent out a free SIM, which they sent already unlocked. Therefore, it should work without a PIN. However, when I use that SIM, it still asks for the PIN and I still cannot use my SIM card!
Can anyone help me? This means I can't text or make calls, or use data.
Hello and thank you for using XDA Assist,
please create an account and ask in our Moto X Q&A section. The expert's there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist
Related
So I unlocked the bootloader of my MOTO G2 and successfully installed custom ROMs but I wiped all data using the TWRP recovery and that wiped off the OS from my phone too, leading to a bricked device. There was no OS on my phone and no SD card support so I couldn't copy a ROM over to the phone. I tried the ADB method but it didn't work, I think because the drivers don't support Windows 10. I tried everything but no luck so I gave my phone to a local service shop and they fixed it but locked my bootloader. Is it possible to unlock the bootloader twice using the same method, that is, by acquiring the unique unlock code for Moto G2 from Motorola site OR using the unique code that I got earlier? I am curious to know because I cannot find it out myself until I retrieve my phone.
Thank you so much guys.
jugalparikh said:
So I unlocked the bootloader of my MOTO G2 and successfully installed custom ROMs but I wiped all data using the TWRP recovery and that wiped off the OS from my phone too, leading to a bricked device. There was no OS on my phone and no SD card support so I couldn't copy a ROM over to the phone. I tried the ADB method but it didn't work, I think because the drivers don't support Windows 10. I tried everything but no luck so I gave my phone to a local service shop and they fixed it but locked my bootloader. Is it possible to unlock the bootloader twice using the same method, that is, by acquiring the unique unlock code for Moto G2 from Motorola site OR using the unique code that I got earlier? I am curious to know because I cannot find it out myself until I retrieve my phone.
Thank you so much guys.
Click to expand...
Click to collapse
Hi, thanks for using XDA Assist!
Please post your question here:
http://forum.xda-developers.com/moto-g-2014/help
Your device experts are located there.
Good luck!
Thread closed.
Hi guys,
I think I messed up my phone big time. I had problems with turning on wlan, so I tried Rebooting and Factory Reset but without success. Next I wanted to reinstall android via TWRP like I would do it with my PC. Now I have a Phone with an empty internal SD Card, locked bootloader and no idea how to fix it.
The PC Companion or any other program does not recognize my phone.
Is there any way to install Android again with a locked bootloader or can I unlock the bootloader without android?
Hopefully anyone knows a solution and I do not need to buy a new phone.
Thanks in advance!
Hi, thank you for using XDA Assist. See your device's specific forum here, http://forum.xda-developers.com/z3. They are the experts on your device. Also, see specifically this, http://forum.xda-developers.com/z3/general/ftf-stock-firmwares-xperia-z3-models-t2886061. If you have further questions you can ask in that thread.
okay thanks for the fast answer!
Thread closed.
Hi guys, I just got a second hand galaxy s6 edge SM-G925w8. Its currently locked to Rogers, and I purchased a code from cellunlocker.net.
The problem is that when I put a sim from another carrier in it, no prompt pops up as it should telling me to enter the network unlock code.
I have also tried using the dialer methods to enter the code, but it just ends up saying unlock successful when the network is still locked.
The phone is on latest firmware, stock, clean imei, and factory reset.
Does anyone have any suggestions
XDA Visitor said:
Hi guys, I just got a second hand galaxy s6 edge SM-G925w8. Its currently locked to Rogers, and I purchased a code from cellunlocker.net.
The problem is that when I put a sim from another carrier in it, no prompt pops up as it should telling me to enter the network unlock code.
I have also tried using the dialer methods to enter the code, but it just ends up saying unlock successful when the network is still locked.
The phone is on latest firmware, stock, clean imei, and factory reset.
Does anyone have any suggestions
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
First, please take a look at the S6 Edge homepage:
Samsung Galaxy S6 Edge
Most of the helpful guides and other information can be found in the General Forum. If you create an XDA account, you can post your questions in the Q&A section.
Good luck and welcome to XDA!
Hi, I downloaded kingroot from this website and rooted my phone without thinking ahead, I struggled but I managed to eventually solve the probelm by unlocking the bootloader :crying: now I'm faced with another issue, my wifi and dual sim card aren't working, I pressed alot of place to get my phone working before I unlocked the bootloader, i even did -fast boot flash flash recovery, ( that might have been where i got the problem with the wifi and sim) Anyways I would appreciate if you could help me get my wifi and sim working again, I have motorla 2gen dual sim, Australia . Also where can I download the lastest stock firmware 6.0 , I don't feel like rooting my phone anymore, this is way more complicated than jailbreaking on iphone.
Hi,
Thanks for using XDA assist.
Can you please confirm that you are using the Motorola Moto G 2nd Gen Dual Sim? This is so I can direct you to the correct forum so experts may help you.
gsstudios
Hello there, I am not new to xda but this is my first post. I've a question regarding my M8 Verizon bought from ebay. Its been a year now and everything was going well since one day I accidentally did s-on and locked the bootloader while using HTC ONE M8 Toolkit by Squabbi.
Then I again s-off'd my device using Sunshine method (firewater didn't worked as it was discontinued). So I paid 1600₹ to get my device s-off'd and unlocked bootloader. But since then I am unable to use any Indian sim whether airtel, idea or any other. I tried many possible solutions found on the internet as well as here on xda. Like I flashed firmware (old and new both), flashed radio firmware files old and new both but no luck. Either I restored my device to stock Verizon rom using the RUU provided by Dottat. But I couldn't find any luck and I'm still unable to use my sim card. My phone is unable to detect it. My device doesn't even pops up any notification for sim card now. Please Help. :crying:
Is there any solution for this? I'm in a need of this.
Waiting to be helped as soon as possible.
Hi,
I do not know if same pb...
Phone is working fine on Lollipop on european Gsm/LTE (sometimes going back to cdma by itself, a bit boring), and is asking for SIM pin number.
When going to marshmallow (by RUU or by OTA) the sim is deribed to be absent or invadid, and It did ask for the SIM pin number
I did not find any clue...
regards
After a lot of tries, it finally worked. And the sim is now detected. Thanks to Me.
shad.man92 said:
After a lot of tries, it finally worked. And the sim is now detected. Thanks to Me.
Click to expand...
Click to collapse
Hello! I have same problem. I can`t use my sim card. Can you tell me how did you solve this problem?
User 1 said:
Hello! I have same problem. I can`t use my sim card. Can you tell me how did you solve this problem?
Click to expand...
Click to collapse
I disassembled my M8, then replaced the sim reader inside the phone, then removed and reinserted the flex on the board. Then turned on the phone, and edited the system file located inside root/system/customize/ACC/default.xml to change the value of sku_id and region located at last in the file default.xml
You can search on google for SKU LIST XDA. It will show you the list for all regions.