Hello, i have this anoying problem that reboots my phone randomly when i use it, problem came after i updated it from 5.x.x to 6.0.1, phone reboots randomly (in menu, internet, settings menu,games, even after i factory reseted it in that stage where you choose language/add gmail account bla bla bla)
firmware v. - 23.5.A.0.575, Android - 6.0.1, phone is an "prototype" this is what it tells after i factory reset it. Bootloader unlocked:Yes, i think my carrier is Orange ROmania (I live in romania), I use windows 10, tried the speria companion on my mom's laptop that has w7 and still the same errors..
Things i tried
---Xperia companion (Software Update) - "Could not check for updates, please try again later", sometimes it appeared "updates found..." but it dissapears instantly and brings the "could not check for updates..."
---Xperia companion (Software repair) - "An error occurred while repairing your device.
Please try again. If the problem persists, please contact Sony support.
Error code: UELoginAuthenticationFailed UE_1100
Tried with firewall/antivirus OFF, no simcard/sd card and still these problems....
---Sony Mobile Flasher --- Install z3 drivers "Sony Net - Install failed"
---tried to install the newer firmware but after pressing volume down+power it flashes the green light then phone turns off, after ~20 second the phone turns on as usual, these are the results.
09/001/2016 15:01:55 - INFO - Selected Bundle for Sony Xperia Z(C6603). FW release : 23.5.A.1.291_R4D. Customization : USA
09/001/2016 15:01:55 - INFO - Preparing files for flashing
09/002/2016 15:02:09 - INFO - Please connect your device into flashmode.
09/005/2016 15:05:14 - INFO - Device connected in flash mode
09/005/2016 15:05:14 - INFO - Opening device for R/W
09/005/2016 15:05:14 - INFO - Reading device information
09/005/2016 15:05:14 - INFO - Phone ready for flashmode operations.
09/005/2016 15:05:14 - INFO - Opening TA partition 2
09/005/2016 15:05:15 - INFO - Current device : D6603 - CB5A1ZNCSX - 1289-4150_R5D - 1282-2729_23.5.A.0.575 - GLOBAL-LTE_23.5.A.0.575
09/005/2016 15:05:15 - INFO - Closing TA partition
09/005/2016 15:05:15 - INFO - Start Flashing
09/005/2016 15:05:15 - INFO - Ending flash session
09/005/2016 15:05:15 - ERROR - Can't read a byte value (RED FONT COLOR!)
09/005/2016 15:05:15 - ERROR - Error flashing. Aborted (RED FONT COLOR!)
09/005/2016 15:05:15 - INFO - Device connected in flash mode
09/005/2016 15:05:15 - INFO - Device disconnected
---Sony EMMA ---It connects when i volume down+power buttons but tells me there are no updates to be done.
---Check for software updater (in phone settings) --- No updater
Anyone....?
Last night when it had ~5-10% battery and was charging very slow, don't know why it didn't restart, i was playing on the phone every 4-5 minutes and no reboot.
You have to be kidding...at least some little advice, ask me something about the problem...say something XDA....
-should i try to flash it in fastboot mode?
-how can i erase the "prototype" thing?
Hi Bro. Let me guess did you buy it from AliExpress right? I've same issue like you bro. When i use the sony PC companion to upgrade xperia version to newest update. It doesn't work got a error like "Error code: UELoginAuthenticationFailed UE_1100" So i never give up my challenge i used Xperia Flashed tool and it works for me. Anyway after update it to Marshmallows i have huge battery drain issue. So i like to know did you find any solution for your issue?
Related
Hi, first of all, i know there are lots of post about bricked phones, trust me, i've seen most of them but none of it helped me and i am kind of fraking out. I got a Sony x10 a few weeks ago and I loved it. I upgraded it to Andoird 2.3.3, rooted it, installed xRecovery, etc. But yesterday I tried to install Android ICS, for that I had to unlock bootloader. Read a lot of post and started, and finally used a method which uses kernel downgrade, a batch program and the kernel upgrade, but guess what, it didn't work, couldn't flash kernel upgrade after all. What freaks me out is that I can't install any ftf either, flashtools keeps showing ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed". Tried using update service, tried with many ftf files and flashtools. Nothing happens. Phone just vibrates a little bit longer than normal when I turn it on and nothing else. It also turn the green led on when connecting to the charger and flash mode seems to work.
I am desperate, I had to do a lot to get a phone like this and now it doesn't even boot with the SE logo. Thanks and I hope someone has the solution.
I forgot to put this:
11/014/2013 14:14:36 - INFO - <- This level is successfully initialized
11/014/2013 14:14:37 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
11/014/2013 14:14:37 - INFO - You can drag and drop ftf files here to start flashing them
11/014/2013 14:14:47 - INFO - Device disconnected
11/015/2013 14:15:19 - INFO - Selected X10_V1_BLRelock.ftf
11/015/2013 14:15:19 - INFO - Preparing files for flashing
11/015/2013 14:15:19 - INFO - Please connect your device into flashmode.
11/015/2013 14:15:26 - INFO - Flash canceled
11/015/2013 14:15:34 - INFO - Selected x10_2.3_aro.ftf
11/015/2013 14:15:34 - INFO - Preparing files for flashing
11/015/2013 14:15:51 - INFO - Please connect your device into flashmode.
11/016/2013 14:16:32 - INFO - Device connected in flash mode
11/016/2013 14:16:32 - INFO - Opening device for R/W
11/016/2013 14:16:33 - INFO - Reading device information
11/016/2013 14:16:33 - INFO - Phone ready for flashmode operations.
11/016/2013 14:16:33 - INFO - Current device : X10i - CB511LGRA4 - 1241-1846_R1C - 1227-4612_2.1.A.0.435 - WORLD-1-4-8_3.0.1.G.0.75
11/016/2013 14:16:33 - INFO - Start Flashing
11/016/2013 14:16:33 - INFO - Processing loader
11/016/2013 14:16:34 - INFO - Using an unofficial loader
11/016/2013 14:16:34 - INFO - Checking header
11/016/2013 14:16:34 - INFO - Ending flash session
11/016/2013 14:16:34 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
11/016/2013 14:16:34 - ERROR - Error flashing. Aborted
11/016/2013 14:16:34 - INFO - Device connected in flash mode
11/016/2013 14:16:36 - INFO - Device disconnected
11/016/2013 14:16:38 - INFO - Device connected in flash mode
complete log, saved when trying to flash stock 2.3.3 firmware
That one should be easy to solve When you choose an ftf file to flash in firmware selection window you have to check "No final verification". That worked for me
P.S. also try to post your threads in the right section
brick
u must try another flash tool the older version
U read a lots, but why didnt u unlock using flashtool plugins? It's easier.
Sent from my Xperia X10 using xda app-developers app
Hi so just yesterday rooted my phone and installed CWM, tried flashing a new rom but I rebooted my phone after deleting the system partition and before installing a new room. Now its stuck on the SONY logo screen, tried using Flashtool to flash the stock rom it gives me this everytime
05/034/2013 16:34:08 - INFO - Device connected in flash mode
05/034/2013 16:34:11 - INFO - Selected ST23i / 11.0.A.2.10 / CentralEurope
05/034/2013 16:34:11 - INFO - Preparing files for flashing
05/034/2013 16:34:41 - INFO - Please connect your device into flashmode.
05/034/2013 16:34:42 - INFO - Opening device for R/W
05/034/2013 16:34:42 - INFO - Start Flashing
05/034/2013 16:34:42 - INFO - Processing loader.sin
05/034/2013 16:34:42 - INFO - Checking header
05/034/2013 16:34:42 - INFO - Ending flash session
05/034/2013 16:34:42 - ERROR -
05/034/2013 16:34:42 - ERROR - Error flashing. Aborted
05/034/2013 16:34:42 - INFO - Device connected in flash mode
Tried using Sony PC Companion it doesnt detects my phone, same with Update Service.
Am I doing something wrong or missing something?
EDIT: Please lock the topic as I found the problem and now sucessfully unbricked it, Windows 8 wasnt letting me do anything
UPDATE: OK i think i managed to brick my phone.... when i try to turn it on the led blinks green it vibrated 1ce and screen doesnt even turn on. tried to flash using flashtood with .55ftf and .58ftf but no luck. it gives me:
02/059/2014 23:59:18 - INFO - Flashtool Version 0.9.16.1 built on 06-16-2014 23:00:00
02/059/2014 23:59:18 - INFO - Executing search strategies to find proxy selector
02/059/2014 23:59:19 - INFO - No proxy found for IE. Trying next one
02/059/2014 23:59:19 - INFO - Proxy found for firefox
02/059/2014 23:59:19 - INFO - Syncing devices from github
02/059/2014 23:59:19 - INFO - Pulling changes
02/059/2014 23:59:20 - INFO - Devices sync finished.
02/059/2014 23:59:21 - INFO - Device disconnected
03/000/2014 00:00:03 - INFO - Selected Bundle for Sony Xperia Miro ST23a. FW release : 11.0.5.8. Customization : ST23a elhackermlxp
03/000/2014 00:00:03 - INFO - Preparing files for flashing
03/000/2014 00:00:03 - INFO - Please connect your device into flashmode.
03/000/2014 00:00:56 - INFO - Device connected in flash mode
03/000/2014 00:00:57 - INFO - Opening device for R/W
03/000/2014 00:00:57 - INFO - Start Flashing
03/000/2014 00:00:57 - INFO - Processing loader.sin
03/000/2014 00:00:57 - INFO - Checking header
03/000/2014 00:00:57 - ERROR - Processing of loader.sin finished with errors.
03/000/2014 00:00:57 - INFO - Ending flash session
03/000/2014 00:00:57 - ERROR -
03/000/2014 00:00:57 - ERROR - Error flashing. Aborted
03/000/2014 00:00:57 - INFO - Device connected in flash mode
ok so i've got cwm flashed on my miro and also running znxt v7.0.. i wanted to try out some of @ShivangDave's roms but when i try to flash it i get an update 7 error on the vengence 2 kernel zip after this i tried to flash rom. but it says that this rom is for: st23a/i. your device: st21i.
can i get some help on this??
1) steps to flash
2) do i have to go back to stock rom and how do i do that im not finding paticular steps... this is ma gf's phone and shes gonna kill me ..
her camera stopped working and has so many random restarts and voice probs on other end when callers call they cant hear.
any nice rom options are also welcome
Flash a stock based kernel and then fash the ftf
thanks me if I helped u
I tried that its telling me that the bootloader is locked..and gives an error in flashtool.. if any1 has any links kindly post em... xda links are all dead... google drive links say u cant dl now as 2 much traffic
QUOTE=xperia2326;54582149]Flash a stock based kernel and then fash the ftf
thanks me if I helped u[/QUOTE]
I was having this Error the other day, make sure you download all the drivers from the Flashtool Driver Folder (C:\Flashtool\drivers) and it will work. Try downloading "Common Drivers JDM-Platform Board" and the "Flash Mode" drivers as these worked for me if not try downloading all of them it takes a long time but it sometimes works.
Moderator u can close this thread..
thanks for the help ppl. tried it all it wasnt working. finally i took it to a service center and they tell me that teh display shorted out?????? i was like how? he was like i dont know sir but your display was gone. and charged me 2k 4 that. aw well.. its fixed n i learn that i shld research more bfre playing around with the bootloader
Hello,
This is a continuation of post http://forum.xda-developers.com/general/xda-assist/xperia-c4-5306-wont-upgrade-t3301096?nocache=1 To recap, about two weeks ago I got a OTA update message, left the phone updating which resulted in a complete unresponsive device, that is a black screen, a red light when charging. The only thing that is allowing me is to go into flashmode, which I've been using to try to repair.
The last thing I've tried was to use Flashtool (v. 0.9.18.6) which gave the the following error.
Code:
02/046/2016 17:46:26 - INFO - Selected Bundle for Sony Xperia C4 (E5306). FW release : 27.1.A.1.106. Customization : US-Generic-0
02/046/2016 17:46:26 - INFO - Preparing files for flashing
02/047/2016 17:47:07 - INFO - Please connect your device into flashmode.
02/053/2016 17:53:27 - INFO - Device connected in flash mode
02/053/2016 17:53:27 - INFO - Opening device for R/W
02/053/2016 17:53:27 - INFO - Device ready for R/W.
02/053/2016 17:53:27 - INFO - Reading device information
02/054/2016 17:54:36 - INFO - Unable to read from phone after having opened it.
02/054/2016 17:54:36 - INFO - trying to continue anyway
02/054/2016 17:54:36 - INFO - Start Flashing
02/054/2016 17:54:36 - INFO - Processing loader.sin
02/054/2016 17:54:36 - INFO - Checking header
02/054/2016 17:54:36 - ERROR - Processing of loader.sin finished with errors.
02/054/2016 17:54:36 - INFO - Ending flash session
02/054/2016 17:54:36 - ERROR - S1 Header checksum Error
02/054/2016 17:54:36 - ERROR - Error flashing. Aborted
This happened with 7.1.A.0.106 R3A and 27.2.A.105 R5A firmwares.
As I mentioned in the other thread, with flashtool v. 0.9.19.10 the only error I received was about a missing flashboot-delivery otherwise the flashing process continued.
Another thing that I've noticed is that when I plug the phone without going into flashmode, windows (8.1 or 10) doesn't recognize it. I keep hearing the sound of a device plugged and unplugged. This makes me think that it may be the cause why I get an error when using Sony PCC. Oh, also I get no message when using adb as suggested in http://forum.xda-developers.com/xperia-c5-ultra/development/bootloader-unlocked-custom-recovery-t3285521
I've read elsewhere about a way to repair a bricked phone by finding a test point but I found no tutorials for my phone.
Any ideas will be welcomed
ssaull said:
Hello,
This is a continuation of post http://forum.xda-developers.com/general/xda-assist/xperia-c4-5306-wont-upgrade-t3301096?nocache=1 To recap, about two weeks ago I got a OTA update message, left the phone updating which resulted in a complete unresponsive device, that is a black screen, a red light when charging. The only thing that is allowing me is to go into flashmode, which I've been using to try to repair.
The last thing I've tried was to use Flashtool (v. 0.9.18.6) which gave the the following error.
Code:
02/046/2016 17:46:26 - INFO - Selected Bundle for Sony Xperia C4 (E5306). FW release : 27.1.A.1.106. Customization : US-Generic-0
02/046/2016 17:46:26 - INFO - Preparing files for flashing
02/047/2016 17:47:07 - INFO - Please connect your device into flashmode.
02/053/2016 17:53:27 - INFO - Device connected in flash mode
02/053/2016 17:53:27 - INFO - Opening device for R/W
02/053/2016 17:53:27 - INFO - Device ready for R/W.
02/053/2016 17:53:27 - INFO - Reading device information
02/054/2016 17:54:36 - INFO - Unable to read from phone after having opened it.
02/054/2016 17:54:36 - INFO - trying to continue anyway
02/054/2016 17:54:36 - INFO - Start Flashing
02/054/2016 17:54:36 - INFO - Processing loader.sin
02/054/2016 17:54:36 - INFO - Checking header
02/054/2016 17:54:36 - ERROR - Processing of loader.sin finished with errors.
02/054/2016 17:54:36 - INFO - Ending flash session
02/054/2016 17:54:36 - ERROR - S1 Header checksum Error
02/054/2016 17:54:36 - ERROR - Error flashing. Aborted
This happened with 7.1.A.0.106 R3A and 27.2.A.105 R5A firmwares.
As I mentioned in the other thread, with flashtool v. 0.9.19.10 the only error I received was about a missing flashboot-delivery otherwise the flashing process continued.
Another thing that I've noticed is that when I plug the phone without going into flashmode, windows (8.1 or 10) doesn't recognize it. I keep hearing the sound of a device plugged and unplugged. This makes me think that it may be the cause why I get an error when using Sony PCC. Oh, also I get no message when using adb as suggested in http://forum.xda-developers.com/xperia-c5-ultra/development/bootloader-unlocked-custom-recovery-t3285521
I've read elsewhere about a way to repair a bricked phone by finding a test point but I found no tutorials for my phone.
Any ideas will be welcomed
Click to expand...
Click to collapse
Hi and welcome to XDA.
There's no dedicated forum for your device here in XDA. I found a discussion thread about the flashtool here http://forum.xda-developers.com/xpe...roxydes-flashtool-features-xperia-c4-t3292650 You can try asking there or in General discussion Questions and Answers
Good luck
Dear XDA Community,
I used the app "iFont" to change my phone font to one that did not come with the app (Champagne & Limousines) . The app rebooted the phone, but it could not go past the Sony logo.
I have tried to repair it with PC Companion and Xperia Companion, but with both programs I have the same problem: they do not recognize my phone (D2305) when I plug it in turned off holding the Volume Up button. Also an error appears, that "SOMC Flash Device" could not be installed.
I also tried to do a hard reset, buy my M2 does not have a recovery mode. I can't flash it either, I get this error:
25/020/2016 13:20:56 - INFO - Selected Bundle for Sony Xperia M2(D2305). FW release: 18.0.A.1.30. Customization : Movistar AR
25/020/2016 13:20:56 - INFO - Preparing files for flashing
25/020/2016 13:21:07 - INFO - Please connect your device into flashmode.
25/020/2016 13:21:18 - INFO - Opening device for R/W
25/020/2016 13:21:19 - INFO - Device connected in flash mode
25/020/2016 13:21:19 - INFO - Start Flashing
25/020/2016 13:21:19 - INFO - Processing loader.sin
25/020/2016 13:21:19 - INFO - Checking header
25/020/2016 13:21:19 - ERROR - Processing of loader.sin finished with errors.
25/020/2016 13:21:19 - INFO - Ending flash session
25/020/2016 13:21:19 - ERROR - null
25/020/2016 13:21:19 - ERROR - Error flashing. Aborted
Click to expand...
Click to collapse
I do not know what else to do!
Thanks in advance!
Welcome to the forum!
First, you'll need to enable 'Unsigned driver installation' in Windows, so that SOMC Flash Device gets correctly installed. There are plenty of guides, this one, for example, may help you.
Once done, try to reintall Flashtool's drivers from C:/Flashtool/drivers/Flashtool-drivers.exe, executing it as administrator.
In the list, check the first two entries, plus, Tianchi driver, and Xperia T2 ultra driver.
Once done, let it install and remember to trust the driver installation if you get prompted.
After that, try again flashing via Flashtool. While the device is being recognized by your pc, let it install the controller, so do not unplug it until you see it gets correctly recognized, by a prompt that will appear.
Then, the flash will begin and all will be restored to factory settings.
Good luck!
Thanks for the welcome and the fast reply!
I did everything you told me and it still did not work.
Sorry for the late response! I gave my phone to a friend, who also could not fix it with software, so he worked with the hardware. It revived!
Thanks a lot for the help. Could you delete this thread, or mark it as solved?
Cheers!