How to install Gear Manager on an iOS device ( NO Jailbreak) - Samsung Gear S2

1. You have to install this install this ipa file in this link
2. Connect your device to your computer open iTunes and run the ipa file
3. Sync your phone in iTunes finally you see Gear S2 manager app in your phone.
4. Go Settings > General > Profile in your iOS device
5.Then select Samsung and tap Trust button.
6. Factory reset your gear s2
7.Open Gear S2 manager app in your iOS device
8.Pair your Gear S2 and use your watch

Technically you can also use cydia impactor as well...either or

cersamens60 said:
1. You have to install this ....
Click to expand...
Click to collapse
This link has ended. Now you will find the *.ipa here:
http://www.usp-forum.de/downloads.php?do=file&id=2555

ThinkD said:
This link has ended. Now you will find the *.ipa here:
http://www.usp-forum.de/downloads.php?do=file&id=2555
Click to expand...
Click to collapse
my link isn't this link the file is in my dropbox account
Sent from my iPhone using Tapatalk

domineus said:
Technically you can also use cydia impactor as well...either or
Click to expand...
Click to collapse
this ipa file is signed also you can use iTunes but if you want you can use another ipa install apps
Sent from my iPhone using Tapatalk

thanks, just got my Verizon Gear S2 connected to Iphone 6s without any issue. Been looking for this.

I'm glad, if i can help you.
Sent from my iPhone using Tapatalk

Followed your way, and my watcht connected after reset its firmware to my 6s plus.
I installed some watchfaces and i do get notifications. Great!

Thanks for this. I just bought this watch today and hoped to use it with my iPhone until I switch to android next month. This enabled me to do so!

Connect via bluetooth , but I could not connect via app gear s2 manager lite
Connect via bluetooth , but I could not connect via app gear s2 manager lite . My device is an iPhone 6s , iOS 10 Beta 5.

[email protected] said:
Connect via bluetooth , but I could not connect via app gear s2 manager lite . My device is an iPhone 6s , iOS 10 Beta 5.
Click to expand...
Click to collapse
Factory Reseted ?
Sent from my iPhone using Tapatalk

[email protected] said:
Connect via bluetooth , but I could not connect via app gear s2 manager lite . My device is an iPhone 6s , iOS 10 Beta 5.
Click to expand...
Click to collapse
You have to factory reset your watch
Sent from my iPhone using Tapatalk

Is this sideloaded iPhone app safe?
Also, can someone confirm this will connect to iPhone via 3G connection? I'm on Verizon.
Also, do the notifications work just as they do on Android, or are there limitations?

Having lots of problems trying to install watch faces, kept getting stuck at 100%, anyone else seeing this? Did a reset of the watch but didn't help.

Guys, i don't have this problems. Did anyone have solutions, please help this peoples.
Sent from my iPhone using Tapatalk

sangweb said:
Having lots of problems trying to install watch faces, kept getting stuck at 100%, anyone else seeing this? Did a reset of the watch but didn't help.
Click to expand...
Click to collapse
I cannot confirm this. I did on the watch the initial factory reset and my 6s plus connected. Installing watchfaces works for me but is terrible slow. I comparrision to an Android connection, I can install only one at a time. On Android I could click more then one at a time. Have you tried another factory reset of the watch?
What I also cannot change is the language of the samsung page. It takes the country settings, not the phone default. That is funny if you live in Malaysia and do not speak well that language.
---------- Post added at 02:49 PM ---------- Previous post was at 02:45 PM ----------
thejdoe said:
Is this sideloaded iPhone app safe?
Also, can someone confirm this will connect to iPhone via 3G connection? I'm on Verizon.
Also, do the notifications work just as they do on Android, or are there limitations?
Click to expand...
Click to collapse
Limitation is, you cannot answer on the watch. Under Android, one can answer pre-defined answers, not under this app on the iphone.
On notation you will get every one you allowed on your phone. Which is more then I could get under Android.

cersamens60 said:
Factory Reseted ?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Yes.
Enviado do meu iPhone usando Tapatalk

I can install some watch faces but most failed. Those failed I've noticed they are over 2 MB while the smaller sizes seems to be ok. e.g. Text Face English ok but WatchAndromeda or Eleonor II not as it downloaded quickly, install stuck at "Install xxx 100%" and just remains for 10 mins without doing anything and I can't install another as it says install in progress, has to kill the app and retried but again stuck at 100%

Working great so far. The only feature that i am unable to use is to block notifications for specific apps. Can't add any app to that category. Did anybody had success there ?

Works great
The Gear S2 works with my iPhone and, in fact, does some things better than with the Galaxy S7.
I can't figure out how to load my music on the device so I could use some help there.
Thanks for the help.

Related

Root access

I know it seems rather trivial, but is there someone working on root access for the gear s2? I'd love custom ringtones like on my gear s.
It can be done without rooting your device. Unfortunately, I don't have a 3g S2 to test it :-/
if you have a method, I'd be more than willing to test and get back to you . Tired of the boring stock tones lol
Actually I'm working on one, and it's very close to release
I can help test with a 3G version as well.
paoloroeseke said:
if you have a method, I'd be more than willing to test and get back to you . Tired of the boring stock tones lol
Click to expand...
Click to collapse
rgburress said:
I can help test with a 3G version as well.
Click to expand...
Click to collapse
Thanks! Currently, I'm having troubles with installing the file on a tester watch other than my own. The steps are rather complicated and difficult due to Samsung's strict policy about distributing apps outside the store. Once the problem is solved, I will let you know. :fingers-crossed:
Thanks! I have sdb setup on my computer at home, and the ability to install sideloaded wgt files if that helps
paoloroeseke said:
Thanks! I have sdb setup on my computer at home, and the ability to install sideloaded wgt files if that helps
Click to expand...
Click to collapse
The problem now is that even if I signed the wgt file with the tester's watch id, it still refuses to install. I'm trying to solve it before I invite more people to test
I also have a 3G version, will be willing to test out. Really sounds dumb, but i want to have custom ringtones, i bought the Filemaster app for $3, it shows you root access. but will not let you transfer to that folder.
Unless someone has a way to do that.
Let me know if you need any testing.
Ok guys any news on rooting this baby?
tipztv said:
The problem now is that even if I signed the wgt file with the tester's watch id, it still refuses to install. I'm trying to solve it before I invite more people to test
Click to expand...
Click to collapse
With root access, is one able to modify system settings like on Android phones (like buildprop tweaks)?
I'm specifically looking for ways to fix the buggy always-on mode still turning off the display & to change the screen timeout.
But if one modifies the watch, will OTA updates still work?
And is there an Odin-like program for the Gear S2?
Sent from my SM-G925P using Tapatalk
optimummind said:
With root access, is one able to modify system settings like on Android phones (like buildprop tweaks)?
I'm specifically looking for ways to fix the buggy always-on mode still turning off the display & to change the screen timeout.
But if one modifies the watch, will OTA updates still work?
And is there an Odin-like program for the Gear S2?
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
Sorry but I'm not familiar with this topic. I haven't messed with the Tizen system before. However, I'm sure that the Odin-like app for the S2 doesn't exist
The custom ringtone app is now available for 3g users. Let me know what you think about it
tipztv said:
The custom ringtone app is now available for 3g users. Let me know what you think about it
Click to expand...
Click to collapse
Do we just download from the app store?
paoloroeseke said:
Do we just download from the app store?
Click to expand...
Click to collapse
Yes, it's in the gear app store
Sent from my iPhone using Tapatalk
Damn, just found this thread and read through it. Haven't looked at Tizen development yet, but am well-experienced developing for Android.
@tipztv, what you mention about deployment is very troubling! How does this issue affect private app development and deployment on one's own watch? I have all kinds of little apps I've developed over the years just for myself to plug functionality holes or just make something easier to do on the phone. Of course, with Android, it's trivial to do this. How about on Tizen?
No news about the root ?
Was root never achieved?

Gear S2 iOS beta program

Waiting seems to have an end: http://www.sammobile.com/2016/08/24/gear-s2-ios-beta-program-has-finally-begun/
In Germany we say: "What takes a long time will become good."
I hope that Korean developers stick to it
Let us share experiences here in this thread.
great, now just wait for it to be official, love to join the beta but can't read korean so don't know how to join.
tried, still waiting for the code email to come! hope will get it soon.
Email with app arrived !!!
Inviato da  iPhone con Tapatalk.
Agent_Mulder said:
Email with app arrived !!!
Inviato da  iPhone con Tapatalk.
Click to expand...
Click to collapse
me too..received this morning! App installed...everything works fine!!!
MY VIDEO !!!
https://youtu.be/p5FrFtBJYvg
Agent_Mulder said:
Email with app arrived !!!
Inviato da  iPhone con Tapatalk.
Click to expand...
Click to collapse
How do you sign up? All I see is MonkeySurvey page and it asked me to sign up for the account. Could someone please provide instructions of how to get into the program? Thanks.
This is what I get when clicked on the beta program.
https://ko.surveymonkey.com/survey-...FWIgGoVRwr_2BO_2FrFWlkD7eXz1hJTQqusMmow_3D_3D
sangweb said:
How do you sign up? All I see is MonkeySurvey page and it asked me to sign up for the account. Could someone please provide instructions of how to get into the program? Thanks.
This is what I get when clicked on the beta program.
after u finish , just wait for the app come to ur email! usually take 48 hrs as officially said, mine takes less than 20 hrs
Click to expand...
Click to collapse
TestFlight email just arrived. Better app than the previous one, leaked months ago, but still has lots of limitations. But it's a good first step
Have any of you tried the sleep monitoring ? I slept about 40 minutes , but nothing happened on the Gear .
coolcashew said:
sangweb said:
How do you sign up? All I see is MonkeySurvey page and it asked me to sign up for the account. Could someone please provide instructions of how to get into the program? Thanks.
This is what I get when clicked on the beta program.
after u finish , just wait for the app come to ur email! usually take 48 hrs as officially said, mine takes less than 20 hrs
Click to expand...
Click to collapse
Which one do I click? Top yellow button or bottom gray? Looks like it is asking me to create the MonkeySurvey account, nothing to do with the beta program.
Click to expand...
Click to collapse
Does the application shareable?
hekimbaba said:
Does the application shareable?
Click to expand...
Click to collapse
nope it's tied to the apple id
That's new (for Gear S2 with iPhone) after a first quick view:
- S Health integration
- load pictures to Gear S2
both working fine :good:
Others same as the lite version. There might be more at a second view
I had the previous beta and firmware for pairing my Gear S2 and iPhone. It worked great. I signed up for Beta.. couldn't connect to my gear for some reason.. The app suggests updating the gear software via wifi on the gear. I did that and then reset to factory settings. Now my iPhone doesn't see the gear at all in bluetooth settings and I can't pair. Phone defaulted to french language when I reset to factory settings. I think that has to do with the leaked firmware provided in the tutorial for downgrading to get the gear to work with the previous beta..
jiggygent said:
I had the previous beta and firmware for pairing my Gear S2 and iPhone. It worked great. I signed up for Beta.. couldn't connect to my gear for some reason.. The app suggests updating the gear software via wifi on the gear. I did that and then reset to factory settings. Now my iPhone doesn't see the gear at all in bluetooth settings and I can't pair. Phone defaulted to french language when I reset to factory settings. I think that has to do with the leaked firmware provided in the tutorial for downgrading to get the gear to work with the previous beta..
Click to expand...
Click to collapse
What's that latest firmware version you have? (Had)
Sent from my iPhone using Tapatalk
novovic said:
What's that latest firmware version you have? (Had)
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I reverted to AOJ3. I don't know what the firmware version was after updating the watch initially earlier today. I decided to downgrade and reverted back to the previously leaked iOS Gear Manager app and firmware. Now I can see my gear and connect to my phone, but the gear app can't find it even though it's connected to the phone. It was working fine before. Tried factory resetting, but that didn't help. On top of that, now it won't update.. it says I have the latest updates, but that isn't true. I had more default apps.. Disappointing..
---------- Post added at 10:56 AM ---------- Previous post was at 10:34 AM ----------
OK so I reverted to BOKK firmware and now I can connect to phone and gear lite app.. I think i'll stick with this until the app is officially released.
I have installed this new version. I'm desapointed. It is still impossible to use somme app.
[email protected] said:
I have installed this new version. I'm desapointed. It is still impossible to use somme app.
Click to expand...
Click to collapse
Are there paid apps visible in the store?
Failed after first sync and first update
I received the mails fast (1/2 day after signing on to the korean side) and first remove the leaked version from the iphone 6s plus.
Then I installed Testflight and inside Testfligh the Beta version.
Gear S2 I did a Firmware reset ( I was on the latest Firmware), on the iphone I unpaired the old Bluetooth connection of the Gear and started both the Beta and the Gear. A fist pairing happened, the iphone installed an update, and after this it tried to reconnect to the phone. And that is where I stay no. The iphone does not show the gear in Bluetooth any more, the beta does not connect to the gear any more :crying:
So I took a Samsung Phone, installed the gearmanager to update the phone. No it comes realy wired. Gear and Samsung Phone see each other on Bluetooth, pairing, but when the gear manager wants to connect to the gear, this fails on the Samsung phone.
So I assume, the Beta installed something on the gear, that failed to work.
Any ideas? The only way I can think of now is to connect over Wifi with Odin and to downgrade to an older version of the gear software :crying:
_________________________________________________________________________
Update: Downgrade worked, watch is up and running again.
My mistake: On the korean webside I selected propably the wrong software and tried to sync my clasic with the fit - drivers
Since the Beta download is closed, I am back for now on the leaked app on my iphone an need to wait till the official app comes :crying:

Official Gear S and Gear Fit apps available for iPhone

People,
Those apps are now available in iOS app store!
Samsung Gear Fit By Samsung Electronics CO.LTD.
Samsung Gear S By Samsung Electronics CO.LTD.
Go get them
nothing change from the beta
cerlixda said:
nothing change from the beta
Click to expand...
Click to collapse
I never had the beta. I was too late to register.
However, there are a lot of UI changes when compared with the leaked 1.5 version. ?
And the Bluetooth app installations in the watch are possessed much faster, although they are still slow as hell.
All I see is the Gear Fit app anything on the S2?
Sent from my iPhone using Tapatalk
JohnnyCarlos said:
I never had the beta. I was too late to register.
However, there are a lot of UI changes when compared with the leaked 1.5 version.
And the Bluetooth app installations in the watch are possessed much faster, although they are still slow as hell.
Click to expand...
Click to collapse
I was hoping to be able to call, navigate and answer to text messages but as the leak version there isn't those functions
CoachCorrieMac said:
All I see is the Gear Fit app anything on the S2?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Yes... Here
https://appsto.re/it/R6mMcb.i
YES - in app store there is the old beta. UNFORTUNATELY the app has the same error that the last beta had (I have reported 3 weeks ago to the developers): when you call in S Health a training with recorded route the app hangs/crashes.
The same thing happens with other users or only with my iPhone SE?
ThinkD said:
YES - in app store there is the old beta. UNFORTUNATELY the app has the same error that the last beta had (I have reported 3 weeks ago to the developers): when you call in S Health a training with recorded route the app hangs/crashes.
The same thing happens with other users or only with my iPhone SE?
Click to expand...
Click to collapse
i had installed on iphone 6 plus IOS 10.2
but as I said, unfortunateley, same that nothing is changed. only read whatsapp/sms, whatsapp no pictures, no contacts, no calls, no maps....
just downloaded the official app : works like a charm ! I got an iPhone SE (iOs 10) and a Gear S2. Here are the step needed :
- remove the leaked app from both your phone and your itunes library
- make forget the watch in the bluetooth settings of the iPhone
- reset the watch to factory settings
After the reboot of the watch, you just need to start the app and link them again. If this doesn't work, check the firmware of the watch, must be the last one.
MokonaW said:
just downloaded the official app : works like a charm ! I got an iPhone SE (iOs 10) and a Gear S2. Here are the step needed :
- remove the leaked app from both your phone and your itunes library
- make forget the watch in the bluetooth settings of the iPhone
- reset the watch to factory settings
After the reboot of the watch, you just need to start the app and link them again. If this doesn't work, check the firmware of the watch, must be the last one.
Click to expand...
Click to collapse
I only reseted the watch. Nothing else.
Basically I installed the official version, and reseted the watch. Only then I uninstalled the leaked version. But there was a few minutes with both the official and the leaked versions installed and everything was working as it is now.
Ah, and I didn't make the phone forget the watch in the Bluetooth settings. Just left it there.
JohnnyCarlos said:
Yes... Here
https://appsto.re/it/R6mMcb.i
Click to expand...
Click to collapse
Awesome thanks! It works for both my wife's and my watch! Funny thing is we had been Samsung galaxy people for 7+ years and just switched to an iPhone two days ago. I run a business and the Samsung just couldn't hang with me and my business. I was extremely bombed because I loved my watch and so did my wife and thought we were going to have to go purchase Apple Watch is. But this saves me! Thanks
Sent from my iPhone using Tapatalk
MokonaW said:
just downloaded the official app : works like a charm ! I got an iPhone SE (iOs 10) and a Gear S2. Here are the step needed :
- remove the leaked app from both your phone and your itunes library
- make forget the watch in the bluetooth settings of the iPhone
- reset the watch to factory settings
After the reboot of the watch, you just need to start the app and link them again. If this doesn't work, check the firmware of the watch, must be the last one.
Click to expand...
Click to collapse
i have this firmware R732XXU2EPK5 and i dowloaded official app that have 1.6.16121402
i follow the steps like you explained but i'm in the same situation: it connect on the app but the watch don't have sms, maps, contact icons, and can only read notification and no for example answer a whatsappa/sms message, no see the contacts.
firstly... are you able to do all those that i'cant do?
if yes can you tell me which firmware i have to install ?
CoachCorrieMac said:
Awesome thanks! It works for both my wife's and my watch! Funny thing is we had been Samsung galaxy people for 7+ years and just switched to an iPhone two days ago. I run a business and the Samsung just couldn't hang with me and my business. I was extremely bombed because I loved my watch and so did my wife and thought we were going to have to go purchase Apple Watch is. But this saves me! Thanks
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
What's the name of the app?
Only see Gear fit manager in the app store.
Gijsph said:
What's the name of the app?
Only see Gear fit manager in the app store.
Click to expand...
Click to collapse
Quote:
Originally Posted by JohnnyCarlos
Yes... Here
https://appsto.re/it/R6mMcb.i
cerlixda said:
Quote:
Originally Posted by JohnnyCarlos
Yes... Here
https://appsto.re/it/R6mMcb.i
Click to expand...
Click to collapse
Is just a strange link. Leads to italian site.
App is not to be found in the App store on the Iphone.
Gijsph said:
Is just a strange link. Leads to italian site.
App is not to be found in the App store on the Iphone.
Click to expand...
Click to collapse
for some reason the app don't appear in the app store. the only way is open "the strange link" view app in itunes and install the app from itunes.
Gijsph said:
Is just a strange link. Leads to italian site.
App is not to be found in the App store on the Iphone.
Click to expand...
Click to collapse
Try going to the Samsung Gear Ft app and click on the Samsung Electronics name. You should see Samsung Gear S app in there.
cerlixda said:
i have this firmware R732XXU2EPK5 and i dowloaded official app that have 1.6.16121402
i follow the steps like you explained but i'm in the same situation: it connect on the app but the watch don't have sms, maps, contact icons, and can only read notification and no for example answer a whatsappa/sms message, no see the contacts.
firstly... are you able to do all those that i'cant do?
if yes can you tell me which firmware i have to install ?
Click to expand...
Click to collapse
can someone help me please?
cerlixda said:
can someone help me please?
Click to expand...
Click to collapse
The watches, that works with iPhone dont have text messeges and cant reply. No contacts too..hope,maybe, in future it will be, but I dont believe in it)) sorry for my English)
Valerievna said:
The watches, that works with iPhone dont have text messeges and cant reply. No contacts too..hope,maybe, in future it will be, but I dont believe in it)) sorry for my English)
Click to expand...
Click to collapse
ah, so i wasted my time all the day when all iphone users aren't able to do those things... so i don't understand whi other users said "work charme" for me, if with this situation could use only half device...
thanks and no problem for the english. my is too bad than yours

[HOW TO] Install Note8 APKs no root

I was at BestBuy today and decided to extract some APKs from the Note8. I can confirm most of these work, like the Camera. If you have that install error factory reset your phone and don't set a screen lock method then install then ASAP. Stuff built for API 25/Android 7.1.1 wont install. Most will though. Don't try installing the keyboard. I will upload this to androidfilehost also.
https://mega.nz/#!BVsxGKxJ!o50c2UzIHibM031rPKgV6F8khjNrn7cB4DEPP6WzUR8
Apps that work:
Storage Monitor
WiFi Direct
Dictionary
Apps Edge
Clipboard Edge
Edge Screen
Finder
Magnify
Calender
Contacts
Dual Messenger
Email
Phone
Messages
Device maintenance
Translate
People edge
Device security
Weather Forecast
ArtCanvas
Camera
Clock
TouchWiz Home
Magnifier
Music
My Files
Calculator
Quick tools
Galaxy Apps
Weather
Gallery
Photo Editor
Wallpapers
Configuration message
Well I was wrong. AND works for a bit then crashes and doesn't work.
What apps will work on s8?
Sent from my SM-G950F using Tapatalk
Akram. said:
What apps will work on s8?
Sent from my SM-G950F using Tapatalk
Click to expand...
Click to collapse
all that have an icon on your phone. I will type up a list. Most do.
Am I missing something? The download contains about half the apps listed.
Nm, stupid root explorer
I can't get them to install. It goes through the motions but then says app not installed because of an app with the same name.
Any workaround?
Sent from my SM-G950U1 using Tapatalk
daddymikey1975 said:
I can't get them to install. It goes through the motions but then says app not installed because of an app with the same name.
Any workaround?
Sent from my SM-G950U1 using Tapatalk
Click to expand...
Click to collapse
You need to install them immediately after setup on a factory reset
joe3681 said:
You need to install them immediately after setup on a factory reset
Click to expand...
Click to collapse
Meh, I'm not feeling a factory reset. Took too long to root and get everything setup to factory reset now unless I absolutely had to.
Thanks though.
Sent from my SM-G950U1 using Tapatalk
If it makes you feel any better, I have newer app versions than all these, even touchwiz by downloading from Apkmirror and installing.
joe3681 said:
If it makes you feel any better, I have newer app versions than all these, even touchwiz by downloading from Apkmirror and installing.
Click to expand...
Click to collapse
Do yours install without the error message?
Sent from my SM-G950U1 using Tapatalk
Edit: tried dual messenger to no avail.
joe3681 said:
If it makes you feel any better, I have newer app versions than all these, even touchwiz by downloading from Apkmirror and installing.
Click to expand...
Click to collapse
Sure, but still. Note8. And I uploaded most of those.
daddymikey1975 said:
Do yours install without the error message?
Sent from my SM-G950U1 using Tapatalk
Edit: tried dual messenger to no avail.
Click to expand...
Click to collapse
Some. The ones that didn't I just saved until I had a healthy list then installed them all after a reset.
---------- Post added at 10:46 PM ---------- Previous post was at 10:09 PM ----------
mweinbach said:
Sure, but still. Note8. And I uploaded most of those.
Click to expand...
Click to collapse
And I don't mean to degrade your work. It's appreciated, however there are newer versions elsewhere. Many of these apps are useless to S8 users anyway. I was mainly meaning that statement as a Head up champ, you're not missing out on much.
joe3681 said:
Some. The ones that didn't I just saved until I had a healthy list then installed them all after a reset.
---------- Post added at 10:46 PM ---------- Previous post was at 10:09 PM ----------
And I don't mean to degrade your work. It's appreciated, however there are newer versions elsewhere. Many of these apps are useless to S8 users anyway. I was mainly meaning that statement as a Head up champ, you're not missing out on much.
Click to expand...
Click to collapse
I know, I plan to keep updating this when I can get the firmware release and keeping this up to date. I am also trying to get the Note8 keyboard to work with live messages. Still working but I got some Overwatch Summer Games to play before I work on that.
TIP: DO NOT install the phone app. While making a call the call connects but it sits at the dialer seem like there's no call going on. I believe it's the phone 1.0 but the app will not uninstall without a factory reset.
joe3681 said:
TIP: DO NOT install the phone app. While making a call the call connects but it sits at the dialer seem like there's no call going on. I believe it's the phone 1.0 but the app will not uninstall without a factory reset.
Click to expand...
Click to collapse
restart your phone...
What's the package name for edge lighting?
lightninbug said:
What's the package name for edge lighting?
Click to expand...
Click to collapse
its part of edge screen.
mweinbach said:
its part of edge screen.
Click to expand...
Click to collapse
So what's the APK called in the package from OP?
We can simply install the apk right?
This works for me on a G955W with the August security patch: whatever Secure Startup is set to, toggle it (i.e. turn it on if it's off and turn it off if it's on), then reboot. Installing APKs over top of system apps works now.
Is there apps that can be installed without factory reset , without package already exist on installation?
Just if someone is able to normally install at least one, can you let me/us know which one ? (to know if its worth to download, for slow internet connection like me) thanks

Question Answer Whatsapp calls

Hello,
My friend has a Galaxy watch 4 classic and can answer Whatsapp calls on his smartphone whereas I can't on my Galaxy watch 4.
Is it because his smartphone is a Samsung and my isn't, or am I missing a setting?
EMJI79 said:
Hello,
My friend has a Galaxy watch 4 classic and can answer Whatsapp calls on his smartphone whereas I can't on my Galaxy watch 4.
Is it because his smartphone is a Samsung and my isn't, or am I missing a setting?
Click to expand...
Click to collapse
Both LTE or both Bluetooth?
EMJI79 said:
Hello,
My friend has a Galaxy watch 4 classic and can answer Whatsapp calls on his smartphone whereas I can't on my Galaxy watch 4.
Is it because his smartphone is a Samsung and my isn't, or am I missing a setting?
Click to expand...
Click to collapse
I have a Watch 4 and can't answer calls either. Not only that, even when I answer the call on my phone, it doesn't send the audio over to the watch
This is disappointing as even a $10 "smartwatch" can do this ... and my phone is also a Samsung =)
I tried using Javascript commands to route the audio from phone speaker to bluetooth, but my bluetooth connection between the phone and watch only shows the Call profile, not the Media profile
Any ideas or solutions to suggest?
Found another solution, a full fledged Whatsapp for our watches. A guy called Joao modded below Beta to work on watch 4/5. Installation of file via ADB to watch, started WA to welcome screen, set wm density to 75 via Wear Installer app, clicked WA on watch to next screen with a beta info, reset wm density, was able to scroll down to QR code and connect watch WA via Linked Devices function to WA on phone. Works perfectly, almost all functions. Remember when playing around with wm density make a watch backup first.
bmwdroid said:
Both LTE or both Bluetooth?
Click to expand...
Click to collapse
Both Bluetooth
bmwdroid said:
Both LTE or both Bluetooth?
Click to expand...
Click to collapse
Both Bluetooth
wyt18 said:
I have a Watch 4 and can't answer calls either. Not only that, even when I answer the call on my phone, it doesn't send the audio over to the watch
This is disappointing as even a $10 "smartwatch" can do this ... and my phone is also a Samsung =)
I tried using Javascript commands to route the audio from phone speaker to bluetooth, but my bluetooth connection between the phone and watch only shows the Call profile, not the Media profile
Any ideas or solutions to suggest?
Click to expand...
Click to collapse
You should have absolutely no problems to answer phone calls on your watch even if it's just Bluetooth. Have you checked permissions?
Otherwise you should reset your watch and restart it. (just do a complete backup of your watch face, settings and apps on your Samsung account).
EMJI79 said:
Both Bluetooth
You should have absolutely no problems to answer phone calls on your watch even if it's just Bluetooth. Have you checked permissions?
Otherwise you should reset your watch and restart it. (just do a complete backup of your watch face, settings and apps on your Samsung account).
Click to expand...
Click to collapse
Are you able to answer WhatsApp calls on your GW4? Normal calls are possible for me, just not WhatsApp calls. And even when I answer on the phone, the audio cannot get transferred to the GW4
EMJI79 said:
Both Bluetooth
Click to expand...
Click to collapse
on my R890 XXU1GVK4 it's working.
WA call is just passed through to the watch.
Nothing else to install for that.
bmwdroid said:
on my R890 XXU1GVK4 it's working.
WA call is just passed through to the watch.
Nothing else to install for that.
Click to expand...
Click to collapse
Do you have a Samsung smartphone?
EMJI79 said:
Do you have a Samsung smartphone?
Click to expand...
Click to collapse
Yes. It's on stock A13.
I think that must be why you can answer Whatsapp calls on your Samsung watch. My friend that can answer Whatsapp calls also has a Samsung smartphone whereas I use a OnePlus.
On A13 too
It works only on samsung smartphones, i have a Xiaomi 11 lite 5G NE and my wife have a S20FE, for her it works, for me not, both galaxy Watch 4 BT model.
Is there an updated version to work? This one says expired?
Thanks
Lucas0511 said:
Found another solution, a full fledged Whatsapp for our watches. A guy called Joao modded below Beta to work on watch 4/5. Installation of file via ADB to watch, started WA to welcome screen, set wm density to 75 via Wear Installer app, clicked WA on watch to next screen with a beta info, reset wm density, was able to scroll down to QR code and connect watch WA via Linked Devices function to WA on phone. Works perfectly, almost all functions. Remember when playing around with wm density make a watch backup first.
Click to expand...
Click to collapse
_v1s_ said:
Is there an updated version to work? This one says expired?
Thanks
Click to expand...
Click to collapse
There were updates posted in a Telegram chat, but in order to evade expiring betas these are based on you might as well install and sideload the regular app now, found on Whatsapp website under Package Installer link (it is a multi APK with arm7 and arm8 included). Unlike the modded beta the app will be shown in square however, but fully functional, and not expiring.
Lucas0511 said:
Found another solution, a full fledged Whatsapp for our watches. A guy called Joao modded below Beta to work on watch 4/5. Installation of file via ADB to watch, started WA to welcome screen, set wm density to 75 via Wear Installer app, clicked WA on watch to next screen with a beta info, reset wm density, was able to scroll down to QR code and connect watch WA via Linked Devices function to WA on phone. Works perfectly, almost all functions. Remember when playing around with wm density make a watch backup first.
Click to expand...
Click to collapse
Lucas0511 said:
There were updates posted in a Telegram chat, but in order to evade expiring betas these are based on you might as well install and sideload the regular app now, found on Whatsapp website under Package Installer link (it is a multi APK with arm7 and arm8 included). Unlike the modded beta the app will be shown in square however, but fully functional, and not expiring.
Click to expand...
Click to collapse
Hello! do you happen to know where this guy Joao originally released this version you posted and its updates? It's a quite more convenient mod than the regular apk since you don't have to modify dpi in the watch to syncronise with your account. On top of that it was modded to be fully displayed in the watch screen, not like the other versions which are cropped with the rounded screen making elements not completely available. Also he introduced some mod to open the apk from native notifications in watch...
For some reasons it seems to have been discontinued and it is not release into telegram groups etc.

Categories

Resources