Hi,
My tablet (Samsung GT-N8000) is stuck in a boot loop and I am not able to get any information such as PDA and CSC of my device. Is there a way to get this information from the serial number or the IMEI number?
I bought my device in Italy however none of the available firmware on SAMMOBILE for Italy works with my device. So I think I should look somewhere else but since I do not have both PDA and CSC information it will be difficult to just download and try.
Thanks for the help.
Any firmware for EU countries should work .
What do you actually mean by does not work ??
JJEgan said:
Any firmware for EU countries should work .
What do you actually mean by does not work ??
Click to expand...
Click to collapse
What I mean by it does not work is that I get stuck in "Nand write operation" using odin v3.09 while flashing a firmware from Europe and after a while I get fail message.
Goggle < "Nand write operation failed >
Nand is the internal memory that may have failed .
Hello I have an issue. Up until now I have not have any issues with Download Mode, but not it shows "RPMB fuse is blown" and "RPMB Provision". I was trying to flash stock Android 7.0 but it always fails, usually the phone displays the message "sw rev check fail fused 2 binary 1". If anyone could give me some guidance on how to fix this or just the info for what RPMB fuse blown means that would be great! The model of the phone is SM-G950U, and yes I used the correct firmware for the flashing. I have also tried to use different varients of Odin.
Try searching on Google.... There are boatload of answers there... I just checked
Helo,
I have big problem with flash new firmware to SG955F with odin, I tried many diferent firmware for SG955F and always almost same error: KERNEL REV. CHECK FAIL. DEVICE:3, BINARY: 1
Tried in odin flash only AP, and all other comnination but same error....sometimes is device :3 binary:1, device:4 binary:1....and like that
Someone knows some solution how can I solve this problem???
xoxo7 said:
Helo,
I have big problem with flash new firmware to SG955F with odin, I tried many diferent firmware for SG955F and always almost same error: KERNEL REV. CHECK FAIL. DEVICE:3, BINARY: 1
Tried in odin flash only AP, and all other comnination but same error....sometimes is device :3 binary:1, device:4 binary:1....and like that
Someone knows some solution how can I solve this problem???
Click to expand...
Click to collapse
Device X , Binary Y errors in Odin mean you are trying to flash an older firmware version than what is on your phone. Device X = current bootloader version number on phone. Binary Y = bootloader version you are trying to flash.
You will have to find latest version to flash for your phone. Bootloader version number is the 5 th number from the right of the firmware name.
spawnlives said:
Device X , Binary Y errors in Odin mean you are trying to flash an older firmware version than what is on your phone. Device X = current bootloader version number on phone. Binary Y = bootloader version you are trying to flash.
You will have to find latest version to flash for your phone. Bootloader version number is the 5 th number from the right of the firmware name.
Click to expand...
Click to collapse
this looks when I am in download mode befor i press start and before I get device and binary error:
https://ibb.co/in65De
Thanks for useful answer!
Tell me please how can I know which firmware i have to find now? Which bootloader number is for my phone?
On my phone I dont have now any firmware....I can go to download mode and twrp only
tnx
when i am in download mode:
https://ibb.co/in65De
Not sure if it will help if you can't boot into phone but in twrp have you tried a factory reset to see if it fixes issue or if you have a backup you could try and restore your phone from that.
If not and since don't know what version you were on before you will have to find the latest firmware for your region (and carrier).
Firmware name will look this(depending on your model)
Example.: G955FXXU2CRF7 the number 2 (5th from the right) will be the bootloader version number. The higher the number the latest released firmware.
I normally use updato.com for my firmware but you could use sammobil or samfirm.
https://updato.com/firmware-archive-select-model?q=S8+&exact=1
Make sure you select the right phone model and in the filter section select region (and carrier) to refine search.
Note: This will replace twrp with stock recovery and also use latest Odin 3.13.1
spawnlives said:
Not sure if it will help if you can't boot into phone but in twrp have you tried a factory reset to see if it fixes issue or if you have a backup you could try and restore your phone from that.
If not and since don't know what version you were on before you will have to find the latest firmware for your region (and carrier).
Firmware name will look this(depending on your model)
Example.: G955FXXU2CRF7 the number 2 (5th from the right) will be the bootloader version number. The higher the number the latest released firmware.
I normally use updato.com for my firmware but you could use sammobil or samfirm.
https://updato.com/firmware-archive-select-model?q=S8+&exact=1
Make sure you select the right phone model and in the filter section select region (and carrier) to refine search.
Note: This will replace twrp with stock recovery and also use latest Odin 3.13.1
Click to expand...
Click to collapse
I sloved it!
That was problem what you said....I always tried flash firmware with wrong bootloader number (1,2,3 bootloader nr), but I needed firmware with bootloader nr 4....when I tried firmware with bootloader version 4 everything was ok.
spawnlives said:
Device X , Binary Y errors in Odin mean you are trying to flash an older firmware version than what is on your phone. Device X = current bootloader version number on phone. Binary Y = bootloader version you are trying to flash.
You will have to find latest version to flash for your phone. Bootloader version number is the 5 th number from the right of the firmware name.
Click to expand...
Click to collapse
Does this apply to the CSC and AP too? Or is there a different way to tell the binary version of the AP and CSC? Because I get the error telling me I've fused 7 and bin 6 for CSC and fused 6 and bin 5 for AP.
spawnlives said:
Not sure if it will help if you can't boot into phone but in twrp have you tried a factory reset to see if it fixes issue or if you have a backup you could try and restore your phone from that.
If not and since don't know what version you were on before you will have to find the latest firmware for your region (and carrier).
Firmware name will look this(depending on your model)
Example.: G955FXXU2CRF7 the number 2 (5th from the right) will be the bootloader version number. The higher the number the latest released firmware.
I normally use updato.com for my firmware but you could use sammobil or samfirm.
https://updato.com/firmware-archive-select-model?q=S8+&exact=1
Make sure you select the right phone model and in the filter section select region (and carrier) to refine search.
Note: This will replace twrp with stock recovery and also use latest Odin 3.13.m
spawnlives said:
Not sure if it will help if you can't boot into phone but in twrp have you tried a factory reset to see if it fixes issue or if you have a backup you could try and restore your phone from that.
If not and since don't know what version you were on before you will have to find the latest firmware for your region (and carrier).
Firmware name will look this(depending on your model)
Example.: G955FXXU2CRF7 the number 2 (5th from the right) will be the bootloader version number. The higher the number the latest released firmware.
I normally use updato.com for my firmware but you could use sammobil or samfirm.
https://updato.com/firmware-archive-select-model?q=S8+&exact=1
Make sure you select the right phone model and in the filter section select region (and carrier) to refine search.
Note: This will replace twrp with stock recovery and also use latest Odin 3.13.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
spawnlives said:
Not sure if it will help if you can't boot into phone but in twrp have you tried a factory reset to see if it fixes issue or if you have a backup you could try and restore your phone from that.
If not and since don't know what version you were on before you will have to find the latest firmware for your region (and carrier).
Firmware name will look this(depending on your model)
Example.: G955FXXU2CRF7 the number 2 (5th from the right) will be the bootloader version number. The higher the number the latest released firmware.
I normally use updato.com for my firmware but you could use sammobil or samfirm.
https://updato.com/firmware-archive-select-model?q=S8+&exact=1
Make sure you select the right phone model and in the filter section select region (and carrier) to refine search.
Note: This will replace twrp with stock recovery and also use latest Odin 3.13.1
Click to expand...
Click to collapse
Hello, please my Verizon says SM-G955FXXU1AQH3 and it's android 7.0, and it's region BTU, that is United Kingdom. So please do I just need to download any latest firmware as in 9 Pie ROM firmwares of any BTU version?
Because I have tried to fine any update that match it as in something like " SM-G955F8AQH8 or something since binary 8 is the latest?.Because I have tried to fine any update that match it as in something like " SM-G955F8AQH8 or something since binary 8 is the latest?.
Hello, please my Verizon says SM-G955FXXU1AQH3 and it's android 7.0, and it's region BTU, that is United Kingdom. So please do I just need to download any latest firmware as in 9 Pie ROM firmwares of any BTU version?
Because I have tried to fine any update that match it as in something like " SM-G955F8AQH8 or something since binary 8 is the latest?.Because I have tried to fine any update that match it as in something like " SM-G955F8AQH8 or something since binary 8 is the latest?.
Elohim-Brown said:
Hello, please my Verizon says SM-G955FXXU1AQH3 and it's android 7.0, and it's region BTU, that is United Kingdom. So please do I just need to download any latest firmware as in 9 Pie ROM firmwares of any BTU version?
Because I have tried to fine any update that match it as in something like " SM-G955F8AQH8 or something since binary 8 is the latest?.Because I have tried to fine any update that match it as in something like " SM-G955F8AQH8 or something since binary 8 is the latest?.
Click to expand...
Click to collapse
Since your on android 7 with Binary ( bootloader ) no.1 you can flash any firmware you want ( within reason )
Just remember if you update bootloader versions you can't downgrade.
If you want the latest version for your device use this PC app
[Tool] Frija - Samsung firmware downloader/checker
* * * PLEASE UNDERSTAND WHAT YOU ARE INSTALLING TO YOUR DEVICES AT ALL TIMES AND ME AND THE DEVELOPER ARE NOT RESPONSIBLE FOR ANY SORT OF DAMAGE TO YOUR DEVICE * * * Hey Guys :) Frija is a new tool (successor of now depreciated tool SamFirm)...
forum.xda-developers.com
Download
extract firmware
flash with odin
spawnlives said:
Since your on android 7 with Binary ( bootloader ) no.1 you can flash any firmware you want ( within reason )
Just remember if you update bootloader versions you can't downgrade.
If you want the latest version for your device use this PC app
[Tool] Frija - Samsung firmware downloader/checker
* * * PLEASE UNDERSTAND WHAT YOU ARE INSTALLING TO YOUR DEVICES AT ALL TIMES AND ME AND THE DEVELOPER ARE NOT RESPONSIBLE FOR ANY SORT OF DAMAGE TO YOUR DEVICE * * * Hey Guys :) Frija is a new tool (successor of now depreciated tool SamFirm)...
forum.xda-developers.com
Download
extract firmware
flash with odin
Click to expand...
Click to collapse
Ok thanks alot, by the way, please how do I know the CSC form my phone, presently it kinda in a boot loop due to the Odin fail, it's shows "kernel rev check fail device 3 binary 1"
Because I kind of see something like CSC in the Fridja app?
Elohim-Brown said:
Ok thanks alot, by the way, please how do I know the CSC form my phone, presently it kinda in a boot loop due to the Odin fail, it's shows "kernel rev check fail device 3 binary 1"
Because I kind of see something like CSC in the Fridja app?
Click to expand...
Click to collapse
Device X Binary Y error means you are trying flash older firmware than what is on your phone.
You can't downgrade ( binary/bootloader ) versions.
Your CSC code will generally be the country/network of where you live and is represented as XXX
If going to use frija then enter model number ( eg: SM-G955F ) and csc XXX.
List Of Samsung CSC Codes | Samsung Firmware CSC Codes - Tsar3000
The Complete Updated List of Samsung CSC Codes, Including all Samsung CSC Codes for the USA, Canada, And Samsung Global CSC codes (UK, Singapore, Italy, ...)
tsar3000.com
spawnlives said:
Device X Binary Y error means you are trying flash older firmware than what is on your phone.
You can't downgrade ( binary/bootloader ) versions.
Your CSC code will generally be the country/network of where you live and is represented as XXX
If going to use frija then enter model number ( eg: SM-G955F ) and csc XXX.
List Of Samsung CSC Codes | Samsung Firmware CSC Codes - Tsar3000
The Complete Updated List of Samsung CSC Codes, Including all Samsung CSC Codes for the USA, Canada, And Samsung Global CSC codes (UK, Singapore, Italy, ...)
tsar3000.com
Click to expand...
Click to collapse
Thanks alot again, well, fridja just automatically filled it for me.
Elohim-Brown said:
Ok thanks alot, by the way, please how do I know the CSC form my phone, presently it kinda in a boot loop due to the Odin fail, it's shows "kernel rev check fail device 3 binary 1"
Because I kind of see something like CSC in the Fridja app?
Click to expand...
Click to collapse
It worked, thanks a lot. God bless you. I am so happy to be a part of this forum.
Hello everyone, I have another issue on my S9plus, I can't find the OEM unclock toggle in the device manager options,
It's SM-G965FXXXS7CSJ6
Any help?
Elohim-Brown said:
Hello everyone, I have another issue on my S9plus, I can't find the OEM unclock toggle in the device manager options,
It's SM-G965FXXXS7CSJ6
Any help?
Click to expand...
Click to collapse
have you waited 7 days without reboot?
No, do I have to change time and date to say 2016 and wait for seven days before I reboot?
No need to change time to 2016.
Hello guys, i bought a Samsung galaxy S7 SM-930U on ebay but i'm in trouble.
When i receive the phone he was locked by google, i tried to unlock by flashing with Odin, but i think i made something wrong, my phone can't boot, he is looping on the boot screen.
I realized i flashed with a wrong firmware, and i cant find a good version for my phone.
Btw when i try to flash with odin i have this error :
Code:
RW REV CHECK FAIL : [aboot] Fused 8 > Binary 4
[1]eMMC write fail: aboot
And in Odin :
Code:
FAIL! (Auth)
Its a SM-930U with "verizon" writed on the back but i dont know the region code of the phone.
I really need help
KIRA37 said:
Hello guys, i bought a Samsung galaxy S7 SM-930U on ebay but i'm in trouble.
When i receive the phone he was locked by google, i tried to unlock by flashing with Odin, but i think i made something wrong, my phone can't boot, he is looping on the boot screen.
I realized i flashed with a wrong firmware, and i cant find a good version for my phone.
Btw when i try to flash with odin i have this error :
Code:
RW REV CHECK FAIL : [aboot] Fused 8 > Binary 4
[1]eMMC write fail: aboot
And in Odin :
Code:
FAIL! (Auth)
Its a SM-930U with "verizon" writed on the back but i dont know the region code of the phone.
I really need help
Click to expand...
Click to collapse
Verizon is a USA network, look on Sammobile for the latest firmware for your phone, or flash with a BTU international firmware.