Hi, this morning I tried to install xposed on my cubot note s running on android 5.1. Sadly I got stuck in bootloop and got a bit scared but I managed to uninstall xposed and everything is running smoothly again now. The fact is that I still want to install Xposed but I wanted to know if you could tell me which version I should install (The phone is as I said on android 5.1 and is running with an ARM architecture)
Thanks.
..........
Thanks for your help it worked ! The bootloop I got stuck in the first time was apparently due to the fact that I installed an older version (v64) but v84 worked perfectly !
Related
Hey guys,
So I'm sure a few of you must be aware of the fact that Rovo89 has released an alpha version of Xposed for android 5.0 and up,
which is available here
I wanted to ask if anyone has tried to install Xposed on their 1033's successfully, because I want to avoid screwing up my phone again.
So please comment on whether you have got it working, along with the recovery and android version you were on.
Thanks
I did.. it's being a night mare.. apk is not getting installed and the framework zip was flased for nothing.. now I am kinda screwed, phone is totally slow and strge says it's gone/// I am trying to see if there are any other better options to work this out.. otherwise I have to flash sourav firmware
Yes i did..and its working fine for me..i m using xt1033 running on android 5.0.2 srock with philz recovery install...its working fine in lots of xt1033 with various roms..here is a thread for working module if u want
http://forum.xda-developers.com/showthread.php?t=3032004
Alright, I've done it and it works perfectly
you should flash ROm, then wipe cache and dalvik. it works fine.
Can anyone provide me exactly which version of Xposed Framework needs to be installed for Moto G XT1033 running on stock rooted 5.0.2? Link would be appreciable as the one I downloaded isnt working.
error running modules
this is all very confusing for me...
i've tried following every step carefully... it installs fine but none of the modules are working for me...
can anyone pls tell me what version do i need for XT1033 running CM 12.1 (android 5.1.1)
thnx
Hi
I have an issue with an XT1032 running 5.0.2. I flashed Xposed with TWRP and it went fine. But, the phone shows a low space warning and the apk does not install. Tried to remove almost everything (3 GB now free) and still the warning.
Does anybody faced this already? Is there a way to make it work?
Thanks
Good morning guys, sorry about the english. So, a while back I installed the 12.1 cm in my GT I9515L (Galaxy S4 VE), the rom was running normally, but i had some problems in some applications that were not compatible with the version BOJ1 (Lollipop). I performed the downgrade of the same for AJN1 (KitKat) to reinstall the CyanogenMod above, the problem is that whenever I go into recovery mode, time to flash the GAPPS, one error appears saying that the version isn't compatible. I performed the test of reset the machine without installing any version of gapps, and the cell was automatically updated to version Lollipop. I would like to ask for your help because I am unable to keep KitKat version in Cyano. I think that it's a litte mine mistake on wipes or in version of cyano, but I googled a lot and found nothing. Thank you guys.
So, all is well here, the .244 update came and it is smooth as hell, only problem is that xposed is terrorising me.
I installed every .zip xposed files possible for 6.0 and 6.0.1 all giveing me bootloops after i restart the phone...
At first i thought it was a module causing the problem, i had wiped my phone clean several times... Still...
Please help...
It did work fine for me, no issue at all... (with latest xposed v85)
can you share the zip pls
http://dl-xda.xposed.info/framework/sdk23/arm64/xposed-v85-sdk23-arm64.zip
thx, but i have found the problem. Apperantly the problem was in the kernel, i flashed the one that came with the ftf a user shared, after i flashed androPlus's kernel everything was normal
So I updated my newer Shield Tablet to 4.1, and restored everything, flashed SuperSU and Xposed and Viper4Android.. It was working fine until I enabled some Xposed modules and rebooted. It gets stuck on the NVIDIA logo and nothing happens. I got it to boot once after flashing Xposed, but the app said that Xposed was installed but not enabled ("see the logs," which made no sense to me). It said there was an update to the app, so I updated it, then downloaded the zip once again and flashed it, and got the NVIDIA logo stuck again. This is horsh!t. Why is it suddenly not working? I'm using the latest, xposed-v85-sdk23-arm zip.
Bump? Been a day and no response??
GuyInDogSuit said:
Bump? Been a day and no response??
Click to expand...
Click to collapse
Maybe nobody knows HERE?
Xposed is working here with NVIDIA-Update 1.2 (6.0.1) without problems. Did the modules you installed work before the update? A bootloop is a common problem with Xposed.
I doubt that this is ROM problem but an Xposed problem. I would try to find help in the Xposed section. Maybe you should try to find the logs...
edisso10018 said:
Maybe nobody knows HERE?
Xposed is working here with NVIDIA-Update 1.2 (6.0.1) without problems. Did the modules you installed work before the update? A bootloop is a common problem with Xposed.
I doubt that this is ROM problem but an Xposed problem. I would try to find help in the Xposed section. Maybe you should try to find the logs...
Click to expand...
Click to collapse
No, it's a ROM problem. They worked fine before.
I'm also using the 6.0.1 update and the latest xposed with no problems. I'd say it's one of your modules not being compatible, not a ROM problem at all, except that the module doesn't seem to be updated to work on mm.
Sent from my SHIELD Tablet K1 using Tapatalk
Exile1975 said:
I'm also using the 6.0.1 update and the latest xposed with no problems. I'd say it's one of your modules not being compatible, not a ROM problem at all, except that the module doesn't seem to be updated to work on mm.
Click to expand...
Click to collapse
I use the same modules on my phone running 6.0.1, with no issues. It's not a module.
did you flash arm version or arm-64 version? cuz arm-64 and intel wont work and there is a systemless xposed try using that if all else fails. I can use xposed myself on 6.0.1 myself btw.
m666p said:
did you flash arm version or arm-64 version? cuz arm-64 and intel wont work and there is a systemless xposed try using that if all else fails. I can use xposed myself on 6.0.1 myself btw.
Click to expand...
Click to collapse
As I stated in the op, it's the xposed-v85-sdk23-arm zip.
Tried reflashing the ROM, the USA LTE version this time, and I'm STILL getting stuck at the boot screen, after enabling modules. I got it to boot with JUST Xposed, no modules.
GuyInDogSuit said:
Tried reflashing the ROM, the USA LTE version this time, and I'm STILL getting stuck at the boot screen, after enabling modules. I got it to boot with JUST Xposed, no modules.
Click to expand...
Click to collapse
As stated before, a module your using isn't updated to work with our implementation of 6.0.1. now reinstall modules one at a time until you figure out which one is causing problems and then ask in the xposed section for that module. Glad you finally figured it out tho
Sent from my SHIELD Tablet K1 using Tapatalk
Exile1975 said:
As stated before, a module your using isn't updated to work with our implementation of 6.0.1. now reinstall modules one at a time until you figure out which one is causing problems and then ask in the xposed section for that module. Glad you finally figured it out tho
Click to expand...
Click to collapse
Well, it was BootManager, but it's working fine on my phone with 6.0.1.
Nope, wasn't BootManager, either. Just not working, at all.
I have installed the xtralite rom on my galaxy s6, I'm using twrp version 3.0.2-1 it runs perfect, however when I try to install the xposed framework using twrp it says success, however when I try to boot to system I get stuck on the Samsung logo. I've waited up to two hours to see if it would load but it did not. I have tried versions 80 through 86 of the framework, sdk 23, arm 64, which is the required one for the rom, being that it is based off of android 6.0
Any help would be appreciated, I've done everything I can think of, been working on this for about three days now. thanks
Faytalrellik said:
I have installed the xtralite rom on my galaxy s6, I'm using twrp version 3.0.2-1 it runs perfect, however when I try to install the xposed framework using twrp it says success, however when I try to boot to system I get stuck on the Samsung logo. I've waited up to two hours to see if it would load but it did not. I have tried versions 80 through 86 of the framework, sdk 23, arm 64, which is the required one for the rom, being that it is based off of android 6.0
Any help would be appreciated, I've done everything I can think of, been working on this for about three days now. thanks
Click to expand...
Click to collapse
Greetings and welcome to assist. You really need to ask this question in the rom thread but if this is the rom you are using
http://forum.xda-developers.com/gal...-xtrestolite-pure-edition-1-0-beta-1-t3082467
I'm pretty sure xposed only works on deodexed roms
Good Luck
Sawdoctor