Hey guys,
So I'm sure a few of you must be aware of the fact that Rovo89 has released an alpha version of Xposed for android 5.0 and up,
which is available here
I wanted to ask if anyone has tried to install Xposed on their 1033's successfully, because I want to avoid screwing up my phone again.
So please comment on whether you have got it working, along with the recovery and android version you were on.
Thanks
I did.. it's being a night mare.. apk is not getting installed and the framework zip was flased for nothing.. now I am kinda screwed, phone is totally slow and strge says it's gone/// I am trying to see if there are any other better options to work this out.. otherwise I have to flash sourav firmware
Yes i did..and its working fine for me..i m using xt1033 running on android 5.0.2 srock with philz recovery install...its working fine in lots of xt1033 with various roms..here is a thread for working module if u want
http://forum.xda-developers.com/showthread.php?t=3032004
Alright, I've done it and it works perfectly
you should flash ROm, then wipe cache and dalvik. it works fine.
Can anyone provide me exactly which version of Xposed Framework needs to be installed for Moto G XT1033 running on stock rooted 5.0.2? Link would be appreciable as the one I downloaded isnt working.
error running modules
this is all very confusing for me...
i've tried following every step carefully... it installs fine but none of the modules are working for me...
can anyone pls tell me what version do i need for XT1033 running CM 12.1 (android 5.1.1)
thnx
Hi
I have an issue with an XT1032 running 5.0.2. I flashed Xposed with TWRP and it went fine. But, the phone shows a low space warning and the apk does not install. Tried to remove almost everything (3 GB now free) and still the warning.
Does anybody faced this already? Is there a way to make it work?
Thanks
Related
I want to ask if there is any problem (flicker screen, red notification on booting up...) when I install CM11 from stock 5.0.2 on Falcon Moto G XT1032? (follow this official guide on CyanogenMod: http://wiki.cyanogenmod.org/w/Install_CM_for_falcon)
Thank you.
I've done this recently and the only issue I've noticed is the screen flickering problem. The solution is to simply press the power button to lock the screen then unlock it and it should be fixed. You only have to do this once but if you reboot your phone you will have to lock/unlock again on first boot.
Thank you for your answer. Just to be sure, did you follow CM guide? Is there anything important which I should be careful about? (I did the same thing with several phones but still noob)
I just booted into custom recovery (I use Philz) and wiped the different partitions along with /cache and /dalvik. You can follow the guide and use the push method or you can use sideload which I did.
I did that and now i have problems with the mac address (i was using 5.1.1) my shows me a different mac and i don't know how fix it, but if i back to LP the problem is solved.
It's a bootloader issue for sure and general happen because you're bootloader is updated to Lolipop 5.0.2 and now you install kitkat as cm 11 over Lolipop.
In simple words your bootloader is new while the software is old
screen flickering issue can be resolved by downgrade bootloader but "BE EXTREMELY CAUTIOUS" failed to upgrade bootloader make your device permanently dead and downgrading is not recommended....
I will recommend try cm12.1 it's rock solid stable as cm11
I finished installed CM 11, firstly the prob is screen flickering. Then after installing all my apps, the android.com.systemui was crashed over and over and cannot use anymore. I reflashed CM and gapps and reinstalled apps but it happened again. Finally, I had to returned to Lollipop.
Anyway, thank you all for your help
Same thing happened to me unfortunately but I've found this one here and it is working beautifully. Try it and see if it works for you without the constant systemui errors.
Thank you. At the moment i am quite happy with GPE version. It seems that this version GPE 5.1.1 is better than Moto stock one.
Good morning guys, sorry about the english. So, a while back I installed the 12.1 cm in my GT I9515L (Galaxy S4 VE), the rom was running normally, but i had some problems in some applications that were not compatible with the version BOJ1 (Lollipop). I performed the downgrade of the same for AJN1 (KitKat) to reinstall the CyanogenMod above, the problem is that whenever I go into recovery mode, time to flash the GAPPS, one error appears saying that the version isn't compatible. I performed the test of reset the machine without installing any version of gapps, and the cell was automatically updated to version Lollipop. I would like to ask for your help because I am unable to keep KitKat version in Cyano. I think that it's a litte mine mistake on wipes or in version of cyano, but I googled a lot and found nothing. Thank you guys.
So, all is well here, the .244 update came and it is smooth as hell, only problem is that xposed is terrorising me.
I installed every .zip xposed files possible for 6.0 and 6.0.1 all giveing me bootloops after i restart the phone...
At first i thought it was a module causing the problem, i had wiped my phone clean several times... Still...
Please help...
It did work fine for me, no issue at all... (with latest xposed v85)
can you share the zip pls
http://dl-xda.xposed.info/framework/sdk23/arm64/xposed-v85-sdk23-arm64.zip
thx, but i have found the problem. Apperantly the problem was in the kernel, i flashed the one that came with the ftf a user shared, after i flashed androPlus's kernel everything was normal
Hi, this morning I tried to install xposed on my cubot note s running on android 5.1. Sadly I got stuck in bootloop and got a bit scared but I managed to uninstall xposed and everything is running smoothly again now. The fact is that I still want to install Xposed but I wanted to know if you could tell me which version I should install (The phone is as I said on android 5.1 and is running with an ARM architecture)
Thanks.
..........
Thanks for your help it worked ! The bootloop I got stuck in the first time was apparently due to the fact that I installed an older version (v64) but v84 worked perfectly !
I have been running Cryogenmod 12.1 for my Samsung SM-A300FU but its UNOFFICIAL and a preview the webpage i got it off says 'Wifi and Camera NOT WORKING'. I guess thats what i get for following my mates advice.
Because of this, i looked at CM13 (Android 6) which i got off the XDA site and i have made sure it is for my phone and model, the SM-A300FU. Of course, being my luck it didnt work. I get the error of 'Executing updater binary in zip' and i have wiped my phone then tried to install it and i have also tried to completly remove all OS and files then install it which apparently fixed it for people, but not me of course. In a desperate measure i even bluetoothed the ROM to another phone then back into my SM-A300FU to get it onto the internal storage but that obviously didnt change anything.
Finally, i gave up and tried to downgrade back to Android 5.0.2 although this isnt a CM zip. Once again, this ROM doesnt work. It just gives me an error saying it failed, no reason in particular.
I have a few issues for a whole range of files. Any help in fixing any or all of these would be much appreciated.
Links to the files I sites i downloaded the files from:
CM 12.1 UNOFFICIAL (Not meant to work fully) - https://forum.xda-developers.com/samsung-a-series/orig-development/rom-cyanogenmod-12-1-samsung-galaxy-a3-t3273323
CM 13 (Doesnt install) - https://forum.xda-developers.com/samsung-a-series/orig-development/rom-cyanogenmod-13-0-unofficial-samsung-t3326297
Android 5.0.2 ROM (Doesnt install) - http://www.youmobile.org/blogs/entry/-Firmware-Download-Samsung-Galaxy-A3-SM-A300FU-Official-Android-5-0-2-Lollipop-update-Rolling-out
So to reitterate: I installed the CM 12.1 ROM without issues but it turns out to be a mod that doesnt work fully meaning its unsuitable for me. I downloaded CM 13 but this gets an error. I downloaded a Android 5.0.2 ROM which has an error it doesnt even tell me about.
XDA Visitor said:
I have been running Cryogenmod 12.1 for my Samsung SM-A300FU but its UNOFFICIAL and a preview the webpage i got it off says 'Wifi and Camera NOT WORKING'. I guess thats what i get for following my mates advice.
Because of this, i looked at CM13 (Android 6) which i got off the XDA site and i have made sure it is for my phone and model, the SM-A300FU. Of course, being my luck it didnt work. I get the error of 'Executing updater binary in zip' and i have wiped my phone then tried to install it and i have also tried to completly remove all OS and files then install it which apparently fixed it for people, but not me of course. In a desperate measure i even bluetoothed the ROM to another phone then back into my SM-A300FU to get it onto the internal storage but that obviously didnt change anything.
Finally, i gave up and tried to downgrade back to Android 5.0.2 although this isnt a CM zip. Once again, this ROM doesnt work. It just gives me an error saying it failed, no reason in particular.
I have a few issues for a whole range of files. Any help in fixing any or all of these would be much appreciated.
Links to the files I sites i downloaded the files from:
CM 12.1 UNOFFICIAL (Not meant to work fully) - https://forum.xda-developers.com/sa...m-cyanogenmod-12-1-samsung-galaxy-a3-t3273323
CM 13 (Doesnt install) - https://forum.xda-developers.com/sa...-cyanogenmod-13-0-unofficial-samsung-t3326297
Android 5.0.2 ROM (Doesnt install) - http://www.youmobile.org/blogs/entr...ial-Android-5-0-2-Lollipop-update-Rolling-out
So to reitterate: I installed the CM 12.1 ROM without issues but it turns out to be a mod that doesnt work fully meaning its unsuitable for me. I downloaded CM 13 but this gets an error. I downloaded a Android 5.0.2 ROM which has an error it doesnt even tell me about.
Click to expand...
Click to collapse
Greetings and welcome to assist. Which recovery are you using ? Have you tried to update to the latest ? Also if that doesn't work try using odin to go back to latest stock then reflashing custom recovery
Why not make an account and let the experts here
https://forum.xda-developers.com/samsung-a-series
guide you
Good Luck
Sawdoctor