Noise from speaker - Samsung Galaxy S7 Questions and Answers

i have a problem with speaker. i can hear some noise from speaker whenever the speaker is active, and few seconds after...
noise is heard when mute or volume very low, since noise is not that laud..
type of noise, how to explain, its constant low noise, maybe something like this
https://www.youtube.com/watch?v=GSaJXDsb3N8&index=18&list=RD5Yw1mgZigEg
example 1: if i play mp3's or youtube i can hear it all the time(when i go to sleep and i listen Ludovico on volume (2), if i mute it it's still there. when i press pause - 3 seconds after that that noise is gone
example 2: i press vol button(up or down), normaly i can hear beep and beside that i hear that noise which stops 3 seconds after beep is gone..
example 3: i listen mp3 music through earphones, press pause, press volume button and i hear normal beep and also noise from speaker. from earphones i hear no noise i think..
tried some things already:
-ACR app (had a problem like this i think, but uninstalling and clearing cache didn't help), also uninstalled some other apps(viber, skype,..), tried safe mode it's the same, and now i even tried to reboot the phone and when samsung animation is on the screen that noise is there for few seconds,..??
p.s. S7 doesn't have boot-startup sound, right?

Today i had a chance to test brothers S7. SAME thing !!??
Please can anyone confirm me if this is normal or not.
And if anybody else have this issue.
You can test it just by pressing button volume-up or volume-down, having speaker near your ear. beside beep, there is a noise which stops after 3 seconds.
any hint would be great

Related

Low Bluespoon volume.

hi,
i have recently purchased the chamelon headset for my tmobile mda2(himalaya). with the help of bluetooth tools for pocket pc i have been able to bond the 2 devices successfully and have achieved a fair working state between both devices. however there is one problem that cannot be avoided. it seems like the volume output on the headset is very low, its very difficult to hear anyone on the other end. the manual states that while in call you can turn up the volume until you hear a beep to indicate the volume is at its highest setting. despite numerous attempts at trying to get the volume higher i have not had any success. while in call i try to press either buttons and there is no change in volume. i have heard a beep a few times after 20-30 consecutive presses but i didnt notice much or if any change in volume. is there anyway to adjust the volume on the headset while not in a call? im not sure whether this may be a problem with the chameleon or perhaps a problems with the bluetooth in the microsoft OS?
Anyone else experience problems like this?
Maybe the Chameleon suffers from the same feature as my BTH-808 headset: When I use it in my right ear the volume-down button (on the side of the headset) is likely to press on my ear and thus . . . .minimizes the volume.
Work-around: use in left ear or ut in with care.
Same behaviour as you describe in changing volume. You have to press the volume-up button approx once every 1-2 seconds for the volume to go up one step.
Took me a week to find out what happened . . .
sigh. i wish it was that simple.
it seems like i have got the headset to its highest volume and it still sounds very weak. nextlink support tells me the volume on the bluespoon is generally very loud.
man... the BT on this machine is really a nightmare.
have you tried to put volume higher like I mentioned. When I press the volume-up to quick, It simply stays low, although I hear the 'volume-up beep'!!
Otherwise: Back for warranty I guess

ring tone volume.....???

XDA II2........I couldn't understand why I missed calls when out and about. Not every day.......but would go through a day when everytime I checked my phone I had missed calls.
Why??
Its because the volume in the ear is the same as the ring tone!! So if I took a quite call, I would turn the vol up hgh. On hang up, no probs to hear the phone ringing. However, I get a call where the voice is very loud,so turn the volume down. Hang up.....and miss a load of calls cause now the ring tone volume is very low!!
Great phone/pda.......but the ring tone and vol in ear are the same!! any patches for this??
Mike
Are you using non default ringtone?
If you said the ringtone is the same volume as the sound volume of your ear reception, and you are using default ringtone... whopsss... ain't that too loud .
cheers,
cyberjaya
Vibrate might help you.
I don't get what you mean...
If I take / make a call, I can turn the earpiece volume up or down independant of the setting for ringtones / notifications.
I tested this...I made a call and turned the volume right down on the earpiece...then I ended the call and checked the volume sliders...both of them are in the same place as they were before. I then rang my 2i and the volume level was the same as it has always been.
Am I getting the wrong end of the stick?

[help] Buzzing sound

I was using ColorDict to look up some words, and suddenly the tablet became unresponsive, i waited and after about 15 seconds it rebooted, while it was rebooting, i heard the buzzing sound, looks like it's from the speaker, but not sure though. after rebooted, no more buzzing sound
The same thing happened a few hours ago when i opened google play music, play songs, put the tablet in sleep mode, after a few minutes the buzzing sound thing happened, because it was in sleep mode, i tried to wake it up by pressing the power button and nothing happened (i guess it froze), then i forced it to shutdown, but if my brain is correct it rebooted itself, i did force it to shutdown, but it did not shutdown, it rebooted itself automatically.
Also i was using text-to-speech in ColorDict, which reads the word, which means it used speaker. i'm assuming this caused the problem
when i used colordict, volume was low, the buzzing sound was not loud
when i listened to music, volume was higher, the buzzing was very loud
-> that's why i think the sound is from the speaker.
Is this a problem with Jelly Bean or does it have something to do with my creaking sound or hardware defect?
thanks

Ringtone/Media/Alarm/Notification Volume do not change

Ive had BLN-L24 B360 for a little under a week now and have noticed some frustrating issues with regards to the volume levels on this phone. For the most part it seems as though the volume slider that indicates volume level/loudness is just a dummy switch because sound from the phones speaker does not go up or down, it is simply on or off, as in the first step above mute is the same volume as max.
This this is the case with all volume levels through the phones speaker and is extremely frustrating because the sounds are too loud. Whether it is screen lock or unlock, receiving a text or call, or the alarm, I dont need everything being super loud even though I have the volume set low. Im tired of being jolted awake by the alarm that I can't adjust and I cant even watch a video clip without headphones at night because everything is just too damn loud.
With head phones plugged in I notice there is some change in volume with notifications and ringtones but there is just no low volume . Media volume (music) with headphones is the only level that can be adjusted to a low volume but I notice that once the high volume warning dialog pops up around halfway, the volume from there to max stays roughly the same.
Ive seen other people say that low headphone output is a major complaint about this phone but has anyone else experienced loud, unadjustable volume from their phones speaker? It seems to me like a software issue which leads me to believe I'm not the only one. If my description of the issue was confusing, the volume output of the phones speaker is exactly the same in both screenshots.
Edit: While looking through all the audio settings once again it seems that somehow viper4android phone speaker was was turned on and extra loud was turned on unknowingly, which explains why the first step of volume was so loud. However this has since been turned off and still doesn't explain why alarms, ringtones and notifications volume is not really adjustable, the volume is just a bit lower now.
a factory reset could change the behavior.
However, this is not the same behavior many are facing, the problem, in general, is low loud speaker volume and none of the user reported this behavior you mentioned. may be a factory reset can help.

Phone keeps going in and out of call mode -Not on call!

Hi guys,
I noticed a week ago that while listening to a WhatsApp voice message I was unable to change the volume using the volume rocker.
I thought this very strange. Then while in the car listening to a podcast via Bluetooth I noticed the audio would stop, then maybe 5 minutes later start again by itself, then stop again (sometimes for ages) then start again.
I've now noticed that the audio was switching to in call volume ( active and green) during the times the audio stopped. As soon as it decided I wasn't on a call it would then default back to media volume and things would start playing again.
So my bloody phone thinks either a call is coming through or I'm on a call yet neither of these things are true.
Very very very frustrating!
Has anybody experienced this? What could this be and how can it be fixed?
Thanks
Bump
homerlovesbeer said:
Bump
Click to expand...
Click to collapse
I am still not able to understand your issue clearly but could it be bad proximity sensor?
Thanks for replying.
My phone has "in call volume" active sometimes even though not on a call. When you press the volume rocker on the side it is active (highlighted in blue) when it shouldn't be.
When active it cuts out all other media.
Then sometimes it's normal where in call volume not showing (not active) when you press the volume rocker so I can play media, (media volume shows active when pressing volume rocker) just the way it should be.
It's totally random.
I'd that clearer?
Thanks!
homerlovesbeer said:
Thanks for replying.
My phone has "in call volume" active sometimes even though not on a call. When you press the volume rocker on the side it is active (highlighted in blue) when it shouldn't be.
When active it cuts out all other media.
Then sometimes it's normal where in call volume not showing (not active) when you press the volume rocker so I can play media, (media volume shows active when pressing volume rocker) just the way it should be.
It's totally random.
I'd that clearer?
Thanks!
Click to expand...
Click to collapse
Do you have smart connect installed? In past I have experience something similar while using smart connect.
Like sometime it acts as if headphone is connected when it's not and you don't hear anything when you play media.
I haven't, and I don't know what smart connect is but my issue isn't it thinking headphone connected, it thinks it's on a phone call

Categories

Resources