[Q] Hp slate 10 HD boot directly into Recovery mode ! - General Questions and Answers

Hello
My issue is that I cannot get my tablette out of recovery mode. Everytime it boots up it goes to Recovery Mode.I tried reboot , and it starts back up recovery mode. I tried to reset the device back to factory defaults from Recovery , didn't work. How can I get this out of recovery mode?

AlimaneDz said:
Hello
My issue is that I cannot get my tablette out of recovery mode. Everytime it boots up it goes to Recovery Mode.I tried reboot , and it starts back up recovery mode. I tried to reset the device back to factory defaults from Recovery , didn't work. How can I get this out of recovery mode?
Click to expand...
Click to collapse
Most probably the twrp and the ROM are incompatible and you have to make choice BTW the two or you accidentally wiped the os.
Things you could try are 1)flash another custom ROM
2)flash another recovery
3)flash stock rom
4)restore a backup if you made any.

northwindtrades said:
Most probably the twrp and the ROM are incompatible and you have to make choice BTW the two or you accidentally wiped the os.
Things you could try are 1)flash another custom ROM
2)flash another recovery
3)flash stock rom
4)restore a backup if you made any.
Click to expand...
Click to collapse
Could you please provide any link for the rom , because i cannot find any !
Thank you :good:

Related

[Q] I am stuck up with my bootloader

I have rooted my nexus one and tried to flash a custom rom. I performed following steps:
1. Rooted as per the instruction. After applying the commands It was ready
2. Installed a custom recovery image with recovery-RA-nexus-v1.7.0.img and it was successful. After rebooting i went in to boot loader mode and took a nandroid backup.
3. Then downloaded a custom rom and placed all radio(radio-4.06.00.12_7), Google App(gapps-hdpi-FRF91-signed), CyanogenMod 6(update-cm-6.0.0-N1-RC2-signed) in to my root of the SD card.
4. Rebooted with recovery mode (holding volume down and power) and selected recovery and it rebooted but got a orange !(symbol) with android and nothing happens.
Please any one help me to how to resolve this. I tried once again installed a custom recovery with the same image. But no luck
Try to reflash CM or restore nandroid backup and then reflash CM
stuck in bootload
dlcsboop said:
I have rooted my nexus one and tried to flash a custom rom. I performed following steps:
1. Rooted as per the instruction. After applying the commands It was ready
2. Installed a custom recovery image with recovery-RA-nexus-v1.7.0.img and it was successful. After rebooting i went in to boot loader mode and took a nandroid backup.
3. Then downloaded a custom rom and placed all radio(radio-4.06.00.12_7), Google App(gapps-hdpi-FRF91-signed), CyanogenMod 6(update-cm-6.0.0-N1-RC2-signed) in to my root of the SD card.
4. Rebooted with recovery mode (holding volume down and power) and selected recovery and it rebooted but got a orange !(symbol) with android and nothing happens.
Please any one help me to how to resolve this. I tried once again installed a custom recovery with the same image. But no luck
Click to expand...
Click to collapse
I have the same problem.
I use nexus 7 toolkit download and install factory 4.2.2 img. but then it stuck in bootloader. I tried reload 4.2.1, back, it still stuck in bootload. My computer sees the device.
How to fix this problem? please help.
Wenson

[Huawei U8180]Flash and recovery

Hey
I installed CWM and a new rom... ok that's not the problem...
First thing:
after installing the final version of the rom... and installing CWM it says it doesn't have a cwm recovery... interesting is that when I boot in recovery via power and volume up it enters in cwm recovery...
another question...
after restoring the original rom, via cwm it restores the original recovery too?
if I select factory reset via CWM recovery, will it put back to stock recovery?
main interest:
how to remove cwm flash recovery, and restore the original one?

[Q] Recovery mode trouble!

I reset me device to factory settings and now it is just not booting in recovery mode. Everytime I try it shows the stock recovery mode loading screen, restarts and boom! Reset to factory again.
Any solutions?
just
Just flash with sp flash tools stock Rom jb
then u can root and get cwm again
Flash stock rom
Sonu44589 said:
I reset me device to factory settings and now it is just not booting in recovery mode. Everytime I try it shows the stock recovery mode loading screen, restarts and boom! Reset to factory again.
Any solutions?
Click to expand...
Click to collapse
It occures if u have cwm or twrp installed and u factory recet from settings. Flash stock rom using sp flash tool.
inGen.AD said:
It occures if u have cwm or twrp installed and u factory recet from settings. Flash stock rom using sp flash tool.
Click to expand...
Click to collapse
No need to flash roms. Just flashed recovery image using sp flash tools
Sonu44589 said:
No need to flash roms. Just flashed recovery image using sp flash tools
Click to expand...
Click to collapse
yes absolutely right... no need to flash full Rom

Stuck in recovery mode.

Using CM 14.1 Nougat 7.1 on my Yu Yunique.
Recovery - TWRP 2.8.7 .
All apps started crashing, went to Recovery mode, wiped cache and davlik cache, booted phone, not fixed.
Did a factory reset from settings, now phone only boots up at recovery mode, rebooting into system via recovery mode also doesn't work.
Tried to install a different recovery, but mobile is not entering Bootloader/fastboot mode via recovery mode options OR "Vol Up+Power button", OR command line from PC.
And I guess doing the factory reset also reset the USB debugging settings?
What do I do? I'm unable to boot up my mobile. When powering off via recovery mode, stuck at Yunique logo, and while trying to enter fastboot mode, also stuck at Yunique logo. Please help me.
No one?
I've been facing the same issue since I installed the latest update of lineage oS 14.1 I can boot into fastboot mode though. To boot into fastboot you have to press power+volume up. If you do manage to find a solution then help me as well please
First try to flash other ROM
Wipe everything include system,internal storage & data.
Problem should be resolved.
If problem not gone then
Flash stock ROM again using ets tool.
www.firmwarefile.com
If you are going to flash stock recovery than choose the option to download firmware v1 instead of v2. V1 has Volte and v2 doesn't
Flash Stock ROM to fix it.
I had the same problem on my YU Yunique but flashing other rom doesn't work for me. Finally I flashed the Stock Rom using Qualcomm Flash Tool (ets flash tool)to get this fixed and it worked. You can flash twrp and custom ROM after that.
I had the same problem and it occurred when I tried updating lineage OS 14.1 via OTA so first of all I'd recommended to manually flash the update to avoid this problem.
Now the only fix for this issue is to flash stock rom via ets tool. That'll fix the issue and then you can flash twrp again.
soham595 said:
Using CM 14.1 Nougat 7.1 on my Yu Yunique.
Recovery - TWRP 2.8.7 .
All apps started crashing, went to Recovery mode, wiped cache and davlik cache, booted phone, not fixed.
Did a factory reset from settings, now phone only boots up at recovery mode, rebooting into system via recovery mode also doesn't work.
Tried to install a different recovery, but mobile is not entering Bootloader/fastboot mode via recovery mode options OR "Vol Up+Power button", OR command line from PC.
And I guess doing the factory reset also reset the USB debugging settings?
What do I do? I'm unable to boot up my mobile. When powering off via recovery mode, stuck at Yunique logo, and while trying to enter fastboot mode, also stuck at Yunique logo. Please help me.
No one?
Click to expand...
Click to collapse
Try these...
Did you run the command 'fastboot devices' when in Yu logo. What is the response???
stuck in recovery
Guys if u have any issue for flashing your stock ROM definitely I will help u.....

[Completed] Unable to recognize the recovery mode!

Hi, my name is Apurv
I was looking for a TWRP recovery for my Mediatek MT6580 phone Homtom Ht3.
I came across a boot image which said that it is for only mediatek phones and can be flashed using flashify only.
Sorry since I am new, I can't insert outside links and images.
I followed all the steps given on the site and flashing the boot image was successful.
When I checked whether this new recovery works or not, my phone directly booted to Factory mode
with following options:- Auto Test, Manual Test, Item Test, Test Report, Debug Test, Clear eMMC, Version, Reboot.
I don't recognize this recovery. Is it TWRP? Because I believe it is CWM. And if it is CWM then how can I go to the Recovery mode?
I do have Kernel and Stock backups on flashify, if I install them, is it going to reinstall my original recovery?
Please help!!!!!!!!!!!
Hi !
the "boot.img" file you have flashed is not a recovery , it is a kernel
The messages you have seen are most probably related to a recovery , maybe stock recovery
Restore the boot img and stock ( I`m not sure what "stock" is ) if you have saved it and if you`re able to restore it
Good luck !

Categories

Resources