Hi There,
I have come close to getting Xposed framework to work on my Canadian variant of the LG Stylo LG-H636.
As there is no custom recovery and I'm not sure about bootloader unlocking, but with no custom recovery it made the process a bit more annoying.
I started by rooting with kingroot, then used a guide to show me how to switch from king user to Superuser because in order to flash Xposed framework I need Flashfire, and in order to use Flashfire I need to be using SuperSU.
So after switching it to SuperSU Binary I registered and installed the Flashfire app.
This is where I am having problems; I don't know what Xposed Framework to use for my LG-H636. There are download options on the Xposed download page that are for my Android L 5.0.2. So I downloaded x86, and ARM, and ARM64, I tried them all by flashing with Flashfire but Still can't get Xposed framework running.
I get the error that Xposed framework is not installed when I go to the app and download a module.
Flashfire seems to say "Done!" after the ARM version is flashed, but not with the others. It just says "Flashing..." and ..."rebooting". I still don't know what one to use. Anyone know the proper Xposed to use?
I thought I was getting close to having some fun on this phone, whereas before I tried all this I only had the option of stock and root.
Question; does anyone out there know the proper Xposed Framework I should be using? I think I've tried them all and still not working. Is there an easier way to get GravityBox LP working? That's actually why I started doing all this!
I'm running Android L 5.0.2, rooted with King Root and switched to SuperSU, flashing Xposed Framework ZIP with Flashfire.
Thanks a bunch!
If you are using or about to use new Xposed installer by dvd_android i notice that there are options to install systemless SDK22 zip ..
!!!!!!!DO NOT FLASH THIS BY ANYMEANS!!!!!!!
Stick with official xposed framework...
Systemless Xposed framework needs boot images to be patched so resulting in unsigned img and hence SECURE BOOT ERROR
THATS ALL !!!!
Sent from my LG-H950 using XDA-Developers mobile app
Are you using official xposed or unofficial from Romracer?
Yes the official rovo88's one.
I am on v85 and its working great.
Flashed it via flashfire v0.50 and it happened under 5mins..
I won't garuntee flashfire v0.50 will flash for you or wont brick your device..
(posted previously in the wrong section)
Anyone using systemless root + xposed and android pay?
I was able to use systemless root with magisk v3 + phh superuser + systemless xposed without any problem however flashfire was not working since I cannot also make chainfire supersSU to work in s7 edge...
( releases after v3 up to v6 are not supporting well samsung - I verified though with the android version G935FXXU1BPH6 which also might be causing issues).
However after updating this version G935FXXU1BPH6 it seems to cause issues with TWRP and only boots to the last (twrp-3.0.2-3-hero2lte.img) and now I cannot go systemless at all because magisk v3 is not working aswell, root simply is not recognized.
SO basically now I'm using stock phone as I wanted to use android pay.... any ideas or anyone with any sucess?
im using v6 without problems. BUT you have to root with cfautoroot and unroot with superSU one time. i think that superSU changes something in boot.img that magisk needs to work ...
after that you have to use phh superuser.
pogo work
Flashfire will not
ok
inteks said:
im using v6 without problems. BUT you have to root with cfautoroot and unroot with superSU one time. i think that superSU changes something in boot.img that magisk needs to work ...
after that you have to use phh superuser.
pogo work
Flashfire will not
Click to expand...
Click to collapse
This works fine as does systemless xposed etc. Did you pick the option to restore stock boot.img when you uninstalled SuperSU?
My banking apps can still detech phh's root. Wondering if the modified boot from SuperSU is the cause. Might just need to wait for Magisk V7 which shouldn't need this workaround.
Galactus said:
This works fine as does systemless xposed etc. Did you pick the option to restore stock boot.img when you uninstalled SuperSU?
My banking apps can still detech phh's root. Wondering if the modified boot from SuperSU is the cause. Might just need to wait for Magisk V7 which shouldn't need this workaround.
Click to expand...
Click to collapse
No. Restore stock boot.img doesn't work for me
Gesendet von meinem SM-G935F mit Tapatalk
Install xposed and KoalaCoak you don't need to be unrooted
That is only for ANZ and Westpac internet banking, not Android Pay? Is that correct? Have you got it working for Android Pay?
Cheers.
playingbball20 said:
Install xposed and KoalaCoak you don't need to be unrooted
Click to expand...
Click to collapse
What bank app are you using? And can you use Android pay?
Cheers in advance
Dear,
I am new to s7 edge
I have g935FU1BPI6 installed .
I would like to install systemless root/xposed/recovery,
Is it possible?
Please guide,
Thanks in adv
earth08 said:
Dear,
I am new to s7 edge
I have g935FU1BPI6 installed .
I would like to install systemless root/xposed/recovery,
Is it possible?
Please guide,
Thanks in adv
Click to expand...
Click to collapse
Read up on Magisk. Systemless Xposed is pointless as you can't bypass safetynet
If we get update and if we update.
Is it require to wipe data after flashing twrp?
Hi guys,
I'm running stock S7 rom and am rooted with Magisk. However, I would like to switch to SuperSu as Magisk causes some problems for me (CPU frequencies not sticking etc).
Is there a way to do this?
Magisk has an uninstaller (link in this thread https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445) so my best bet would just be run the uninstaller which will remove Magisk, then install SuperSU through it's official instructions?
Official Xposed Working perfectly,
Root your MI A1 by following this instructions
https://forum.xda-developers.com/mi-...pdate-t3681024
Please carefully watch these steps to root..your phone...
Then we are gone for xposed..
Download the xposed installer.zip
http://dl-xda.xposed.info/framework/sdk25/arm64/
Flash the zip file using Flashfire app...then install,
XposedInstaller_3.1.2.apk
https://forum.xda-developers.com/showthread.php?t=3034811
Not working.
It's working perfectly...
Screenshot prof...
is this module works for you?
they say it works for Nougat too
https://forum.xda-developers.com/xposed/modules/mod-fingerprint-enabler-t3411066
when screen is locked by third party app (some launcher, 3rd party tile, etc) fingerprint on Mi A1 cannot unlock the phone.
that module enables that.
Tried as you wrote: flashed the xposed zip file using flashfire -> reboot -> xposed framework wasn't installed.
Then I tried to install xposed framework using the xposed app -> worked
=> Just install xposed installer apk and install xposed framework using the app.
Edit: I forgot that there was this thread: https://forum.xda-developers.com/mi-a1/how-to/install-xposed-flashfire-recovery-t3685713
https://forum.xda-developers.com/mi-...pdate-t3681024
link not working
its worked used xposed installer v3.1.2
gavitybox work fine too....
Yup gravity box works very well. Pleased with the way development is happening & being an AOSP we will get our fair share.
thanks for sharing~
AndroidAdvisor said:
Official Xposed Working perfectly,
Root your MI A1 by following this instructions
https://forum.xda-developers.com/mi-...pdate-t3681024
Please carefully watch these steps to root..your phone...
Then we are gone for xposed..
Download the xposed installer.zip
http://dl-xda.xposed.info/framework/sdk25/arm64/
Flash the zip file using Flashfire app...then install,
XposedInstaller_3.1.2.apk
https://forum.xda-developers.com/showthread.php?t=3034811
Click to expand...
Click to collapse
It does not work, when i flashed it via flashfire, i got still black screen for over 30minutes, so i gave up and forced it to reboot...
Then i've got bootloop.....
When i tried to install it via xposed app i got this error:
ves626 said:
It does not work, when i flashed it via flashfire, i got still black screen for over 30minutes, so i gave up and forced it to reboot...
Then i've got bootloop.....
When i tried to install it via xposed app i got this error:
Click to expand...
Click to collapse
i think it's was magisk that caused error.
i used supersu for root.
Sent from my Mi A1 using Tapatalk
ves626 said:
It does not work, when i flashed it via flashfire, i got still black screen for over 30minutes, so i gave up and forced it to reboot...
Then i've got bootloop.....
When i tried to install it via xposed app i got this error:
Click to expand...
Click to collapse
this is because ur have rooted ur cell with magisk
root it in supersu
Hellrazoraj said:
Yup gravity box works very well.
Click to expand...
Click to collapse
That was everything I was looking for. Thanks for the advice
AndroidAdvisor said:
Official Xposed Working perfectly,
Root your MI A1 by following this instructions
https://forum.xda-developers.com/mi-...pdate-t3681024
Click to expand...
Click to collapse
Just wanted to point out that the link you've given there comes out as "https://forum.xda-developers.com/mi-...pdate-t3681024" and leads to a 404.
guys i have flashed magdisk and it works and now im trying to flash systemless xposed via recovery and i get this:
/system could not be mounted
Error installing zip file...
faddys123 said:
guys i have flashed magdisk and it works and now im trying to flash systemless xposed via recovery and i get this:
/system could not be mounted
Error installing zip file...
Click to expand...
Click to collapse
Hey buddy, I will root my phone & share the steps(screenshots) with you by tonight
Hellrazoraj said:
Hey buddy, I will root my phone & share the steps(screenshots) with you by tonight
Click to expand...
Click to collapse
i had to flash a file called sysmount and then i flashed the systemless xposed but it told me that i need magdisk v14 or higher :/
ArchitDewari said:
this is because ur have rooted ur cell with magisk
root it in supersu
Click to expand...
Click to collapse
This is the answer to all having magisk and trying to get Xposed
I just did the following procedure:
flashed official rom with miflash,
booted to rom,
intalled second october OTA update (75mb),
booted twrp with "fastboot boot recovery.img",
and then:
installed magisk 14.4
installed magisk manager,
installed systemless xposed module from within magisk manager,
and finally installed material design xposed installer
(with reboot between each step)
and finally i have magisk root and working xposed.
If i select magisk core only mode (witch disables magisk modules) it passes safetynet and theoretically i can install OTA updates (i think xposed -systemless or not- does not pass safetynet)
ilpanos said:
I just did the following procedure:
flashed official rom with miflash,
booted to rom,
intalled second october OTA update (75mb),
booted twrp with "fastboot boot recovery.img",
and then:
installed magisk 14.4
installed magisk manager,
installed systemless xposed module from within magisk manager,
and finally installed material design xposed installer
(with reboot between each step)
and finally i have magisk root and working xposed.
If i select magisk core only mode (witch disables magisk modules) it passes safetynet and theoretically i can install OTA updates (i think xposed -systemless or not- does not pass safetynet)
Click to expand...
Click to collapse
Can you provide link all of these ?